Prediction of protein assemblies, the next frontier: The CASP14-CAPRI experiment.

We present the results for CAPRI Round 50, the fourth joint CASP-CAPRI protein assembly prediction challenge. The Round comprised a total of twelve targets, including six dimers, three trimers, and three higher-order oligomers. Four of these were easy targets, for which good structural templates were available either for the full assembly, or for the main interfaces (of the higher-order oligomers). Eight were difficult targets for which only distantly related templates were found for the individual subunits. Twenty-five CAPRI groups including eight automatic servers submitted ~1250 models per target. Twenty groups including six servers participated in the CAPRI scoring challenge submitted ~190 models per target. The accuracy of the predicted models was evaluated using the classical CAPRI criteria. The prediction performance was measured by a weighted scoring scheme that takes into account the number of models of acceptable quality or higher submitted by each group as part of their five top-ranking models. Compared to the previous CASP-CAPRI challenge, top performing groups submitted such models for a larger fraction (70-75%) of the targets in this Round, but fewer of these models were of high accuracy. Scorer groups achieved stronger performance with more groups submitting correct models for 70-80% of the targets or achieving high accuracy predictions. Servers performed less well in general, except for the MDOCKPP and LZERD servers, who performed on par with human groups. In addition to these results, major advances in methodology are discussed, providing an informative overview of where the prediction of protein assemblies currently stands.

Protein-Protein and Protein-Peptide Docking with ClusPro Server.

The process of creating a model of the structure formed by a pair of interacting molecules is commonly referred to as docking. Protein docking is one of the most studied topics in computational and structural biology with applications to drug design and beyond. In this chapter, we describe ClusPro, a web server for protein-protein and protein-peptide docking. As an input, the server requires two Protein Data Bank (PDB) files (protein-protein mode) or a PDB file for the protein and a sequence for the ligand (protein-peptide mode). Its output consists of ten models of the resulting structure formed by the two objects upon interaction. The server typically produces results in less than 4 h. The server also provides tools (via "Advanced Options" list) for a user to fine-tune the results using any additional knowledge about the interaction process, e.g., small-angle X-ray scattering (SAXS) profile or distance restraints.

ClusPro in rounds 38 to 45 of CAPRI: Toward combining template-based methods with free docking.

Targets in the protein docking experiment CAPRI (Critical Assessment of Predicted Interactions) generally present new challenges and contribute to new developments in methodology. In rounds 38 to 45 of CAPRI, most targets could be effectively predicted using template-based methods. However, the server ClusPro required structures rather than sequences as input, and hence we had to generate and dock homology models. The available templates also provided distance restraints that were directly used as input to the server. We show here that such an approach has some advantages. Free docking with template-based restraints using ClusPro reproduced some interfaces suggested by weak or ambiguous templates while not reproducing others, resulting in correct server predicted models. More recently we developed the fully automated ClusPro TBM server that performs template-based modeling and thus can use sequences rather than structures of component proteins as input. The performance of the server, freely available for noncommercial use at https://tbm.cluspro.org, is demonstrated by predicting the protein-protein targets of rounds 38 to 45 of CAPRI.

Sampling and refinement protocols for template-based macrocycle docking: 2018 D3R Grand Challenge 4.

We describe a new template-based method for docking flexible ligands such as macrocycles to proteins. It combines Monte-Carlo energy minimization on the manifold, a fast manifold search method, with BRIKARD for complex flexible ligand searching, and with the MELD accelerator of Replica-Exchange Molecular Dynamics simulations for atomistic degrees of freedom. Here we test the method in the Drug Design Data Resource blind Grand Challenge competition. This method was among the best performers in the competition, giving sub-angstrom prediction quality for the majority of the targets.

ClusPro LigTBM: Automated Template-based Small Molecule Docking.

The template-based approach has been essential for achieving high-quality models in the recent rounds of blind protein-protein docking competition CAPRI (Critical Assessment of Predicted Interactions). However, few such automated methods exist for protein-small molecule docking. In this paper, we present an algorithm for template-based docking of small molecules. It searches for known complexes with ligands that have partial coverage of the target ligand, performs conformational sampling and template-guided energy refinement to produce a variety of possible poses, and then scores the refined poses. The algorithm is available as the automated ClusPro LigTBM server. It allows the user to specify the target protein as a PDB file and the ligand as a SMILES string. The server then searches for templates and uses them for docking, presenting the user with top-scoring poses and their confidence scores. The method is tested on the Astex Diverse benchmark, as well as on the targets from the last round of the D3R (Drug Design Data Resource) Grand Challenge. The server is publicly available as part of the ClusPro docking server suite at https://ligtbm.cluspro.org/.

Improved Modeling of Peptide-Protein Binding Through Global Docking and Accelerated Molecular Dynamics Simulations.

Peptides mediate up to 40% of known protein-protein interactions in higher eukaryotes and play a key role in cellular signaling, protein trafficking, immunology, and oncology. However, it is challenging to predict peptide-protein binding with conventional computational modeling approaches, due to slow dynamics and high peptide flexibility. Here, we present a prototype of the approach which combines global peptide docking using ClusPro PeptiDock and all-atom enhanced simulations using Gaussian accelerated molecular dynamics (GaMD). For three distinct model peptides, the lowest backbone root-mean-square deviations (RMSDs) of their bound conformations relative to X-ray structures obtained from PeptiDock were 3.3-4.8 Å, being medium quality predictions according to the Critical Assessment of PRediction of Interactions (CAPRI) criteria. GaMD simulations refined the peptide-protein complex structures with significantly reduced peptide backbone RMSDs of 0.6-2.7 Å, yielding two high quality (sub-angstrom) and one medium quality models. Furthermore, the GaMD simulations identified important low-energy conformational states and revealed the mechanism of peptide binding to the target proteins. Therefore, PeptiDock+GaMD is a promising approach for exploring peptide-protein interactions.

Template-based modeling by ClusPro in CASP13 and the potential for using co-evolutionary information in docking.

As a participant in the joint CASP13-CAPRI46 assessment, the ClusPro server debuted its new template-based modeling functionality. The addition of this feature, called ClusPro TBM, was motivated by the previous CASP-CAPRI assessments and by the proven ability of template-based methods to produce higher-quality models, provided templates are available. In prior assessments, ClusPro submissions consisted of models that were produced via free docking of pre-generated homology models. This method was successful in terms of the number of acceptable predictions across targets; however, analysis of results showed that purely template-based methods produced a substantially higher number of medium-quality models for targets for which there were good templates available. The addition of template-based modeling has expanded ClusPro's ability to produce higher accuracy predictions, primarily for homomeric but also for some heteromeric targets. Here we review the newest additions to the ClusPro web server and discuss examples of CASP-CAPRI targets that continue to drive further development. We also describe ongoing work not yet implemented in the server. This includes the development of methods to improve template-based models and the use of co-evolutionary information for data-assisted free docking.

Kinase Atlas: Druggability Analysis of Potential Allosteric Sites in Kinases.

The inhibition of kinases has been pursued by the pharmaceutical industry for over 20 years. While the locations of the sites that bind type II and III inhibitors at or near the adenosine 5'-triphosphate binding sites are well defined, the literature describes 10 different regions that were reported as regulatory hot spots in some kinases and thus are potential target sites for type IV inhibitors. Kinase Atlas is a systematic collection of binding hot spots located at the above ten sites in 4910 structures of 376 distinct kinases available in the Protein Data Bank. The hot spots are identified by FTMap, a computational analogue of experimental fragment screening. Users of Kinase Atlas ( https://kinase-atlas.bu.edu ) may view summarized results for all structures of a particular kinase, such as which binding sites are present and how druggable they are, or they may view hot spot information for a particular kinase structure of interest.

Monte Carlo on the manifold and MD refinement for binding pose prediction of protein-ligand complexes: 2017 D3R Grand Challenge.

Manifold representations of rotational/translational motion and conformational space of a ligand were previously shown to be effective for local energy optimization. In this paper we report the development of the Monte-Carlo energy minimization approach (MCM), which uses the same manifold representation. The approach was integrated into the docking pipeline developed for the current round of D3R experiment, and according to D3R assessment produced high accuracy poses for Cathepsin S ligands. Additionally, we have shown that (MD) refinement further improves docking quality. The code of the Monte-Carlo minimization is freely available at https://bitbucket.org/abc-group/mcm-demo .

Use of deep neural network ensembles to identify embryonic-fetal transition markers: repression of COX7A1 in embryonic and cancer cells.

Here we present the application of deep neural network (DNN) ensembles trained on transcriptomic data to identify the novel markers associated with the mammalian embryonic-fetal transition (EFT). Molecular markers of this process could provide important insights into regulatory mechanisms of normal development, epimorphic tissue regeneration and cancer. Subsequent analysis of the most significant genes behind the DNNs classifier on an independent dataset of adult-derived and human embryonic stem cell (hESC)-derived progenitor cell lines led to the identification of COX7A1 gene as a potential EFT marker. COX7A1, encoding a cytochrome C oxidase subunit, was up-regulated in post-EFT murine and human cells including adult stem cells, but was not expressed in pre-EFT pluripotent embryonic stem cells or their in vitro-derived progeny. COX7A1 expression level was observed to be undetectable or low in multiple sarcoma and carcinoma cell lines as compared to normal controls. The knockout of the gene in mice led to a marked glycolytic shift reminiscent of the Warburg effect that occurs in cancer cells. The DNN approach facilitated the elucidation of a potentially new biomarker of cancer and pre-EFT cells, the embryo-onco phenotype, which may potentially be used as a target for controlling the embryonic-fetal transition.

Protein-ligand docking using FFT based sampling: D3R case study.

Fast Fourier transform (FFT) based approaches have been successful in application to modeling of relatively rigid protein-protein complexes. Recently, we have been able to adapt the FFT methodology to treatment of flexible protein-peptide interactions. Here, we report our latest attempt to expand the capabilities of the FFT approach to treatment of flexible protein-ligand interactions in application to the D3R PL-2016-1 challenge. Based on the D3R assessment, our FFT approach in conjunction with Monte Carlo minimization off-grid refinement was among the top performing methods in the challenge. The potential advantage of our method is its ability to globally sample the protein-ligand interaction landscape, which will be explored in further applications.

SOP-GPU: influence of solvent-induced hydrodynamic interactions on dynamic structural transitions in protein assemblies.

Hydrodynamic interactions (HI) are incorporated into Langevin dynamics of the Cα -based protein model using the Truncated Expansion approximation (TEA) to the Rotne-Prager-Yamakawa diffusion tensor. Computational performance of the obtained GPU realization demonstrates the model's capability for describing protein systems of varying complexity (10(2) -10(5) residues), including biological particles (filaments, virus shells). Comparison of numerical accuracy of the TEA versus exact description of HI reveals similar results for the kinetics and thermodynamics of protein unfolding. The HI speed up and couple biomolecular transitions through cross-communication among protein domains, which result in more collective displacements of structure elements governed by more deterministic (less variable) dynamics. The force-extension/deformation spectra from nanomanipulations in silico exhibit sharper force signals that match well the experimental profiles. Hence, biomolecular simulations without HI overestimate the role of tension/stress fluctuations. Our findings establish the importance of incorporating implicit water-mediated many-body effects into theoretical modeling of dynamic processes involving biomolecules. © 2016 Wiley Periodicals, Inc.

Molecular mechanisms, thermodynamics, and dissociation kinetics of knob-hole interactions in fibrin.

Polymerization of fibrin, the primary structural protein of blood clots and thrombi, occurs through binding of knobs 'A' and 'B' in the central nodule of fibrin monomer to complementary holes 'a' and 'b' in the γ- and ß-nodules, respectively, of another monomer. We characterized the A:a and B:b knob-hole interactions under varying solution conditions using molecular dynamics simulations of the structural models of fibrin(ogen) fragment D complexed with synthetic peptides GPRP (knob 'A' mimetic) and GHRP (knob 'B' mimetic). The strength of A:a and B:b knob-hole complexes was roughly equal, decreasing with pulling force; however, the dissociation kinetics were sensitive to variations in acidity (pH 5-7) and temperature (T = 25-37 °C). There were similar structural changes in holes 'a' and 'b' during forced dissociation of the knob-hole complexes: elongation of loop I, stretching of the interior region, and translocation of the moveable flap. The disruption of the knob-hole interactions was not an "all-or-none" transition as it occurred through distinct two-step or single step pathways with or without intermediate states. The knob-hole bonds were stronger, tighter, and more brittle at pH 7 than at pH 5. The B:b knob-hole bonds were weaker, looser, and more compliant than the A:a knob-hole bonds at pH 7 but stronger, tighter, and less compliant at pH 5. Surprisingly, the knob-hole bonds were stronger, not weaker, at elevated temperature (T = 37 °C) compared with T = 25 °C due to the helix-to-coil transition in loop I that helps stabilize the bonds. These results provide detailed qualitative and quantitative characteristics underlying the most significant non-covalent interactions involved in fibrin polymerization.