ABSTRACT
The advantageous optical properties of quantum dots (QDs) motivate their use in a wide variety of applications related to imaging and bioanalysis, including the detection of proteases and their activity. Recent studies have shown that surface chemistry on QDs is able to modulate protease activity, but only nonspecifically. Here, we present a strategy to selectively accelerate the activity of a particular target protease by as much as two orders of magnitude. Exosite-binding "bait" peptides were derived from proteins that span a range of biological rolesâsubstrate, receptor, and inhibitorâand were used to increase the affinity of the QD-peptide conjugates for either thrombin or factor Xa, resulting in increased rates of proteolysis for coconjugated substrates. Unlike effects from QD surface chemistry, the acceleration was specific to the target protease with negligible acceleration of other proteases. Benefits of this "bait and cleave" sensing approach included detection limits that improved by more than an order of magnitude, reenabled detection of target protease against an overwhelming background of nontarget proteolysis, and mitigation of the action of inhibitors. The cumulative results point to a generalizable strategy, where the mechanism of acceleration, considerations for the design of bait peptides and conjugates, and routes to expanding the scope of this approach are discussed. Overall, this research represents a major step forward in the rational design of nanoparticle-based enzyme sensors that enhance sensitivity and selectivity.
Subject(s)
Peptides , Quantum Dots , Thrombin , Quantum Dots/chemistry , Peptides/chemistry , Peptides/metabolism , Thrombin/metabolism , Thrombin/analysis , Thrombin/chemistry , Factor Xa/metabolism , Factor Xa/chemistry , Proteolysis , Humans , Surface Properties , Peptide Hydrolases/metabolism , Peptide Hydrolases/chemistryABSTRACT
Proteases are important biomarkers and targets for the diagnosis and treatment of disease. The advantageous properties of semiconductor quantum dots (QDs) have made these nanoparticles useful as probes for protease activity; however, the effects of QD surface chemistry on protease activity are not yet fully understood. Here, we present a systematic study of the impact of sterics on the proteolysis of QD-peptide conjugates. The study utilized eight proteases (chymotrypsin, trypsin, endoproteinase Lys C, papain, endoproteinase Arg C, thrombin, factor Xa, and plasmin) and 41 distinct surface chemistries. The latter included three molecular weights of each of three macromolecular ligands derived from dextran and polyethylene glycol, as well as anionic and zwitterionic small-molecule ligands, and an array of mixed coatings of macromolecular and small-molecule ligands. These surface chemistries spanned a diversity of thicknesses, densities, and packing organization, as characterized by gel electrophoresis, capillary electrophoresis, dynamic light scattering, and infrared spectroscopy. The macromolecular ligands decreased the adsorption of proteases on the QDs and decelerated proteolysis of the QD-peptide conjugates via steric hindrance. The properties of the QD surface chemistry, rather than the protease properties, were the main factor in determining the magnitude of deceleration. The broad scope of this study provides insights into the many ways in which QD surface chemistry affects protease activity, and will inform the development of optimized nanoparticle-peptide conjugates for sensing of protease activity and resistance to unwanted proteolysis.
ABSTRACT
Semiconducting polymer dots (Pdots) are brightly fluorescent nanoparticles of growing interest for bioanalysis and imaging. A recurring challenge with these materials is obtaining robust physical and colloidal stability and low nonspecific binding. Here, we prepared and characterized Pdots with bovine serum albumin (BSA) as the stabilizing agent (BSA-Pdots) instead of a more conventionally used amphiphilic polymer, both without and with cross-linking of the protein using glutaraldehyde (BSA(GA)-Pdots) or disuccinimidyl glutarate. Characterization included fluorescence properties; colloidal stability as a function of pH, ionic strength, and solvent perturbation; shape retention and hardness; and nonspecific binding with common assay substrates, fixed cells, and live cells. These properties were contrasted with the same properties for amphiphilic polymer-stabilized Pdots and silica-coated Pdots. On balance, the BSA-stabilized Pdots were similar or more favorable in their properties, with BSA(GA)-Pdots being especially advantageous. Bioconjugation of the BSA-stabilized Pdots was possible using amine-reactive active-ester chemistry, including biotinylation and bioorthogonal functionalization for immunoconjugation via tetrazine-strained-alkene click chemistry. These approaches were used for selective fluorescent labeling of cells based on ligand-receptor and antibody-antigen binding, respectively. Overall, direct BSA stabilization is a very promising strategy for preparing Pdots with improved physical and colloidal stability, reduced nonspecific interactions, and utility for in vitro diagnostics and other bioanalyses and imaging.
Subject(s)
Nanoparticles , Quantum Dots , Semiconductors , Polymers/chemistry , Serum Albumin , Fluorescence , Coloring Agents , Serum Albumin, Bovine , Quantum Dots/chemistryABSTRACT
Photoluminescence (PL) imaging and bioanalysis with smartphone-based devices are of growing interest for point-of-care/point-of-need diagnostics. Strategies for maximizing sensitivity have been explored in this context, but color multiplexing has been very limited, with its maximum level unexplored. Here, we evaluated color multiplexing with smartphone-based PL imaging by using supra-nanoparticle assemblies of quantum dots (supra-QDs). These materials were prepared as composite colors that were tailored to the red-green-blue (RGB) color space of smartphone cameras by coassembling different ratios of R-, G-, and B-emitting QDs on a silica nanoparticle scaffold. The supra-QDs were characterized and used to label cell-sized objects that were measured under flow with a smartphone-based device. Each color followed an approximately linear trajectory in the RGB space, and training of support vector machine models enabled color classification with overall accuracies ≥87% for 10-color multiplexing and better accuracies for fewer colors. Most misclassification occurred at low signal levels, such that establishing a nonclassifiable zone near the origin of RGB color space improved the overall 10-color classification accuracy to ≥94%. Similar improvements in accuracy with greater retention of data were possible with a probabilistic rather than a radial threshold. Simulations that were parameterized by experimental data suggested that ≥14-color multiplexing with accuracies ≥90% should be possible with an optimized supra-QD color set. This study is an important foundation for advancing RGB color-based multiplexing for imaging and analyses with smartphone cameras and related charge-coupled device and CMOS color image sensor technologies.
Subject(s)
Nanoparticles , Quantum Dots , Smartphone , Fluorescence Resonance Energy TransferABSTRACT
Smartphones are emerging platforms for point-of-care diagnostics (POCDs), where the on-board camera is, for example, used to image fluorescence. Many laboratory instruments are capable of time-gated (TG) photoluminescence (PL) measurementsâan analytical method leveraged by multiple commercial assay kits. When paired with long-lived PL emitters such as luminescent lanthanide complexes (LLCs), time-gating eliminates background from sample autofluorescence and many other sources. This capability is amenable to minimally processed samples and would thus be useful for POCDs on a smartphone-based platform. Here, we report a double-chopper design for TG PL imaging using a portable, 3D-printed, smartphone-based device. The rotation speed, dimensions, and overlap of the chopper blades and gaps set the timing parameters, with delay times on the order of hundreds of microseconds to milliseconds. The device was capable of quantitative TG imaging of PL from terbium(III) and europium(III) LLCs, including rejection of short-lived PL background from serum and tissue phantoms, spectral and temporal multiplexing, a model time-gated Förster resonance energy transfer (TG-FRET) assay, and imaging of cells. As the first smartphone-based demonstrations of these important analytical capabilities, this work is an important foundation for developing POCD methods based on TG PL imaging.
Subject(s)
Lanthanoid Series Elements , Smartphone , Diagnostic Imaging , Phantoms, Imaging , Biological Assay , EuropiumABSTRACT
Silicon nanocrystals (SiNCs) are a promising material for applications in bioanalysis and imaging. Compared to other types of semiconductor nanocrystals, the development and characterization of energy transfer (ET) configurations with SiNCs has been far more limited, resulting in an equally limited understanding of this process and its SiNC-specific nuances. Here, we present a systematic and detailed study of ET between SiNCs and dyes. A combination of spectroelectrophoresis and time-gated and time-resolved photoluminescence measurements were used to characterize the photophysical properties of ensembles of SiNCs and gain insight into how these properties varied as a function of nanocrystal size. ET between SiNC donors and a series of non-fluorescent Black Hole Quencher (BHQ) dyes and fluorescent sulfo-Cyanine 5.5 dye acceptors was evaluated in terms of spectral properties, wavelength-resolved efficiencies, trends with spectral overlap integral, and differences between two methods of BHQ association with the SiNCs. The overall results were consistent with a Förster resonance energy transfer (FRET) mechanism where the polydispersity of the SiNCs had a significant impact on the observed ET: the choice of wavelength and timing parameters were important, and ensemble measurements represented an average of heterogeneous ET behaviors. Prospective advantages and disadvantages of SiNCs as ET donors are discussed. This study serves as a foundation for the continued and optimized development of ET configurations with SiNCs.
ABSTRACT
Colloidal semiconductor quantum dots (QDs) are of widespread interest as fluorescent labels for bioanalysis and imaging applications. Single-particle measurements have proven to be a very powerful tool for better understanding the fundamental properties and behaviors of QDs and their bioconjugates; however, a recurring challenge is the immobilization of QDs in a solution-like environment that minimizes interactions with a bulk surface. Immobilization strategies for QD-peptide conjugates are particularly underdeveloped within this context. Here, we present a novel strategy for the selective immobilization of single QD-peptide conjugates using a combination of tetrameric antibody complexes (TACs) and affinity tag peptides. A glass substrate is modified with an adsorbed layer of concanavalin A (ConA) that binds a subsequent layer of dextran that minimizes nonspecific binding. A TAC with anti-dextran and anti-affinity tag antibodies binds to the dextran-coated glass surface and to the affinity tag sequence of QD-peptide conjugates. The result is spontaneous and sequence-selective immobilization of single QDs without any chemical activation or cross-linking. Controlled immobilization of multiple colors of QDs is possible using multiple affinity tag sequences. Experiments confirmed that this approach positions the QD away from the bulk surface. The method supports real-time imaging of binding and dissociation, measurements of Förster resonance energy transfer (FRET), tracking of dye photobleaching, and detection of proteolytic activity. We anticipate that this immobilization strategy will be useful for studies of QD-associated photophysics, biomolecular interactions and processes, and digital assays.
Subject(s)
Quantum Dots , Peptides/chemistry , Coloring Agents , Fluorescence Resonance Energy Transfer/methodsABSTRACT
Colloidal semiconductor quantum dots (QDs) are a popular material for applications in bioanalysis and imaging. Although individual QDs are bright, some applications benefit from the use of even brighter materials. One approach to achieve higher brightness is to form super-nanoparticle (super-NP) assemblies of many QDs. Here, we present the preparation, characterization, and utility of dextran-functionalized super-NP assemblies of QDs. Amphiphilic dextran was synthesized and used to encapsulate many hydrophobic QDs via a simple emulsion-based method. The resulting super-NP assemblies or "super-QDs" had hydrodynamic diameters of ca. 90-160 nm, were characterized at the ensemble and single-particle levels, had orders-of-magnitude superior brightness compared to individual QDs, and were non-blinking. Additionally, binary mixtures of red, green, and blue (RGB) colors of QDs were used to prepare super-QDs, including colors difficult to obtain from individual QDs (e.g., magenta). Tetrameric antibody complexes (TACs) enabled simple antibody conjugation for selective cellular immunolabeling and imaging with both an epifluorescence microscope and a smartphone-based platform. The technical limitations of the latter platform were overcome by the increased per-particle brightness of the super-QDs, and the super-QDs outperformed individual QDs in both cases. Overall, the super-QDs are a very promising material for bioanalysis and imaging applications where brightness is paramount.
Subject(s)
Nanoparticles , Quantum Dots , Quantum Dots/chemistry , Dextrans , Nanoparticles/chemistry , Semiconductors , Diagnostic ImagingABSTRACT
Combinations of luminescent nanoparticles (LNPs) and Förster resonance energy transfer (FRET) offer properties and features that are advantageous for sensing of biomolecular targets and activity. Despite a multitude of designs for LNP-FRET sensors, intracellular sensing applications are underdeveloped. We introduce readers to this field, summarize essential concepts, meta-analyze the literature, and offer a perspective on the bottleneck in LNP-FRET sensor development.
Subject(s)
Fluorescence Resonance Energy Transfer , Nanoparticles , Luminescence , Luminescent ProteinsABSTRACT
Förster resonance energy transfer (FRET) is widely used for the development of biological probes and sensors. In this context, the norm for multiplexed detection is deployment of multiple probes, each a discrete donor-acceptor pair. Concentric FRET (cFRET) probes enable multiplexed sensing with a single vector but, to date, have only been developed around semiconductor quantum dots, which may limit the scope of biological applications for such probes. Here, we demonstrate that dendrimers labeled with a luminescent terbium complex (Tb) are a viable and advantageous alternative platform for cFRET probes. Polyamidoamine dendrimers were functionalized with Tb, biotin, NeutrAvidin, and three types of dye-labeled oligonucleotide probes to establish a network of competitive and sequential Tb-to-dye and dye-to-dye FRET pathways. These probes were characterized physically and photophysically, and a time-gated multiplexed assay for DNA targets was demonstrated. The time-gating offered by the Tb allowed the rejection of background autofluorescence from serum. More broadly, this dendrimer-based architecture shows that cFRET is a general concept and is an important step toward a new generation of probes for biological sensing.
Subject(s)
Dendrimers , Quantum Dots , Fluorescence Resonance Energy Transfer , Terbium , LuminescenceABSTRACT
Förster resonance energy transfer (FRET) is a widely used fluorescence-based sensing mechanism. To date, most implementations of FRET sensors have relied on a discrete donor-acceptor pair for detection of each analytical target. FRET networks are an emerging concept in which target recognition perturbs a set of interconnected FRET pathways between multiple emitters. Here, we review the energy transfer topologies and scaffold materials for FRET networks, propose a general nomenclature, and qualitatively summarize the dynamics of the competitive, sequential, homoFRET, and heteroFRET pathways that constitute FRET networks. Implementations of FRET networks for sensing are also described, including concentric FRET probes, other single-vector multiplexing, and logic gates and switches. Unresolved questions and future research directions for current systems are discussed, as are potential but currently unexplored applications of FRET networks in sensing.
Subject(s)
Fluorescence Resonance Energy Transfer , Quantum DotsABSTRACT
Methods for the detection, enumeration, and typing of cells are important in many areas of research and healthcare. In this context, flow cytometers are a widely used research and clinical tool but are also an example of a large and expensive instrument that is limited to specialized laboratories. Smartphones have been shown to have excellent potential to serve as portable and lower-cost platforms for analyses that would normally be done in a laboratory. Here, we developed a prototype smartphone-based flow cytometer (FC). This compact 3D-printed device incorporated a laser diode and a microfluidic flow cell and used the built-in camera of a smartphone to track immunofluorescently labeled cells in suspension and measure their color. This capability was enabled by high-brightness supra-nanoparticle assemblies of colloidal semiconductor quantum dots (SiO2@QDs) as well as a support vector machine (SVM) classification algorithm. The smartphone-based FC device detected and enumerated target cells against a background of other cells, simultaneously and selectively counted two different cell types in a mixture, and used multiple colors of SiO2@QD-antibody conjugates to screen for and identify a particular cell type. The potential limits of multicolor detection are discussed alongside ideas for further development. Our results suggest that innovations in materials and engineering should enable eventual smartphone-based FC assays for clinical applications.
ABSTRACT
Semiconducting polymer dots (Pdots) have emerged as versatile probes for bioanalysis and imaging at the single-particle level. Despite their utility in multiplexed analysis, deep blue Pdots remain rare due to their need for high-energy excitation and sensitivity to photobleaching. Here, we describe the design of deep blue fluorophores using structural constraints to improve resistance to photobleaching, two-photon absorption cross sections, and fluorescence quantum yields using the hexamethylazatriangulene motif. Scanning tunneling microscopy was used to characterize the electronic structure of these chromophores on the atomic scale as well as their intrinsic stability. The most promising fluorophore was functionalized with a polymerizable acrylate handle and used to give deep-blue fluorescent acrylic polymers with Mn > 18 kDa and D < 1.2. Nanoprecipitation with amphiphilic polystyrene-graft-(carboxylate-terminated poly(ethylene glycol)) gave water-soluble Pdots with blue fluorescence, quantum yields of 0.81, and molar absorption coefficients of (4 ± 2) × 108 M-1 cm-1. This high brightness facilitated single-particle visualization with dramatically improved signal-to-noise ratio and photobleaching resistance versus an unencapsulated dye. The Pdots were then conjugated with antibodies for immunolabeling of SK-BR3 human breast cancer cells, which were imaged using deep blue fluorescence in both one- and two-photon excitation modes.
ABSTRACT
Fluorescence imaging in living cells is key to understanding many biological processes, yet autofluorescence from the sample can lower sensitivity and hinder high-resolution imaging. Time-gated measurements using phosphorescent metal complexes can improve imaging, at the cost of potential toxicity from the use of heavy metals. Here, we describe orange/red-emitting polymer dots (Pdots) exhibiting thermally activated delayed fluorescence (TADF) for time-gated imaging. Inspired by the cell invasion mechanism of the HIV TAT protein, the Pdots were formed from block copolymers composed of a hydrophilic guanidine-rich block as a cell-penetrating peptide mimic, and a rigid organic semiconductor block to provide efficient delayed fluorescence. These all-organic polymer nanoparticles were shown to efficiently enter HeLa, CHO, and HepG2 cells within 30 min, with cell viabilities remaining high for Pdot concentrations up to 25 mg mL-1. Pdot quantum yields were as high as 0.17 in aerated water, with the Pdot structure effectively shielding the TADF emitters from quenching by oxygen. Colocalization experiments revealed that the Pdots primarily accumulate outside of lysosomes, minimizing lysosomal degradation. When used for fixed cellular imaging, Pdot-incubated cells showed high signal-to-background ratios compared to control samples with no Pdot exposure. Using time-resolved spectroscopy, the delayed emission of the TADF materials was effectively separated from that of both a biological serum and a secondary fluorescent dye.
Subject(s)
Fluorescence , Fluorescent Dyes/chemistry , Optical Imaging , Polymers/chemistry , Temperature , Animals , CHO Cells , Cricetulus , Fluorescent Dyes/metabolism , HeLa Cells , Hep G2 Cells , Humans , Lysosomes/chemistry , Lysosomes/metabolism , Molecular Structure , Polymers/metabolismABSTRACT
Quantum dots (QDs) offer bright and robust photoluminescence among several other advantages in comparison to fluorescent dyes. In order to leverage the advantageous properties of QDs for applications in bioanalysis and imaging, simple and reliable methods for bioconjugation are required. One such method for conjugating peptides to QDs is the use of polyhistidine tags, which spontaneously bind to the surface of QDs. We describe protocols for assembling polyhistidine-tagged peptides to QDs and for characterizing the resultant QD-peptide conjugates. The latter include both electrophoretic and FRET-based protocols for confirming successful peptide assembly, estimating the maximum peptide loading capacity, and measuring the assembly kinetics. Sensors for protease activity and intracellular delivery are briefly noted as prospective applications of QD-peptide conjugates.
Subject(s)
Quantum Dots , Fluorescence Resonance Energy Transfer , HistidineABSTRACT
Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.
Subject(s)
Luminescence , Nanoparticles/analysis , Nanoparticles/chemistry , Lanthanoid Series Elements , Nanotubes, Carbon/analysis , Nanotubes, Carbon/chemistry , Polymers , Quantum Dots/analysis , Quantum Dots/chemistryABSTRACT
Near-infrared-emitting polymers were prepared using four boron-difluoride-curcuminoid-based monomers using ring-opening metathesis polymerization (ROMP). Well-defined polymers with molecular weights of ≈20â kDa and dispersities <1.07 were produced and exhibited near-infrared (NIR) emission in solution and in the solid state with photoluminescence quantum yields (ΦPL ) as high as 0.72 and 0.18, respectively. Time-resolved emission spectroscopy revealed thermally activated delayed fluorescence (TADF) in polymers containing highly planar dopants, whereas room-temperature phosphorescence dominated with twisted species. Density functional theory demonstrated that rotation about the donor-acceptor linker can give rise to TADF, even where none would be expected based on calculations using ground-state geometries. Incorporation of TADF-active materials into water-soluble polymer dots (Pdots) gave NIR-emissive nanoparticles, and conjugation of these Pdots with antibodies enabled immunofluorescent labeling of SK-BR3 human breast-cancer cells.
Subject(s)
Boron Compounds/chemistry , Breast Neoplasms/diagnostic imaging , Diarylheptanoids/chemistry , Fluorescent Dyes/chemistry , Optical Imaging , Polymers/chemistry , Cell Line, Tumor , Density Functional Theory , Female , Fluorescent Dyes/chemical synthesis , Humans , Infrared Rays , Molecular Structure , Polymers/chemical synthesisABSTRACT
Colloidal semiconductor quantum dots (QDs), metal nanoparticles, and cellulose paper are materials with numerous applications in bioanalysis and beyond. The functional properties of QDs and metal NPs are substantially different than those of cellulose, such that their integration with cellulose paper is potentially enabling for many applications. Here, we characterize and evaluate multiple chemistries that modify cellulose paper substrates for the affinity-based immobilization of QDs, gold nanoparticles (Au NPs), and platinum nanoparticles (Pt NPs). These chemistries include grafting of cellulose fibers with imidazole and dithiol groups, as well as the aminosilanization of cellulose fibers (both with and without subsequent grafting with dithiol groups). Cellulose modifications and nanoparticle immobilization are characterized by multiple techniques, including, but not limited to, X-ray photoelectron spectroscopy, scanning electron microscopy, and optical imaging, extinction, and fluorescence measurements. We demonstrate the on-paper immobilization of color-tuned mixtures of QDs, on-paper patterning of QDs by microcontact printing, and post-immobilization enhancement of energy transfer and model assays of protease activity. The robustness of QD photoluminescence is also evaluated between immobilization chemistries. Paper-immobilized Au NPs and Pt NPs are evaluated as potential substrates for SERS and as supported catalysts for a model decolorization reaction. Our cumulative results indicate that there may not be a one-size-fits-all immobilization chemistry. Instead, the immobilization chemistry should be tailored and optimized for the downstream application.
ABSTRACT
There is a growing need for brighter luminescent materials to improve the detection and imaging of biomarkers. Relevant contexts include low-abundance biomarkers and technology-limited applications, where an example of the latter is the emerging use of smartphones and other nonoptimal but low-cost and portable devices for point-of-care diagnostics. One approach to achieving brighter luminescent materials is incorporating multiple copies of a luminescent material into a larger supra-nanoparticle (supra-NP) assembly. Here, we present a facile method for the preparation and immunoconjugation of supra-NP assemblies (SiO2@QDs) that comprised many quantum dots (QDs) around a central silica nanoparticle (SiO2 NP). The assembly was entirely driven by spontaneous affinity interactions between the constituent materials, which included imidazoline-functionalized silica nanoparticles, ligand-coated QDs, imidazole-functionalized dextran, and tetrameric antibody complexes (TACs). The physical and optical properties of the SiO2@QDs were characterized at both the ensemble and single-particle levels. Notably, the optical properties of the QDs were preserved upon assembly into supra-NPs, and single SiO2@QDs were approximately an order of magnitude brighter than single QDs and nonblinking. In proof-of-concept applications, including selective immunolabeling of breast cancer cells, the SiO2@QDs provided higher sensitivity and superior signal-to-background ratios whether using research-grade fluorescence microscopy or smartphone-based imaging. Overall, the SiO2@QDs are promising materials for enhanced bioanalysis and imaging.