A Rapid Sputum-based Lateral Flow Assay for Airway Eosinophilia using an RNA-cleaving DNAzyme Selected for Eosinophil Peroxidase.

The first protein-binding allosteric RNA-cleaving DNAzyme (RCD) obtained by direct in vitro selection against eosinophil peroxidase (EPX), a validated marker for airway eosinophilia, is described. The RCD has nanomolar affinity for EPX, shows high selectivity against related peroxidases and other eosinophil proteins, and is resistant to degradation by mammalian nucleases. An optimized RCD was used to develop both fluorescence and lateral flow assays, which were evaluated using 38 minimally processed patient sputum samples (23 non-eosinophilic, 15 eosinophilic), producing a clinical sensitivity of 100 % and specificity of 96 %. This RCD-based lateral flow assay should allow for rapid evaluation of airway eosinophilia as an aid for guiding asthma therapy.

A sputum bioassay for airway eosinophilia using an eosinophil peroxidase aptamer.

Eosinophils are granulocytes that play a significant role in the pathogenesis of asthma and other airway diseases. Directing patient treatment based on the level of eosinophilia has been shown to be extremely effective in reducing exacerbations and therefore has tremendous potential as a routine clinical test. Herein, we describe the in vitro selection and optimization of DNA aptamers that bind to eosinophil peroxidase (EPX), a protein biomarker unique to eosinophils. Fifteen rounds of magnetic bead aptamer selection were performed prior to high throughput DNA sequencing. The top 10 aptamer candidates were assessed for EPX binding using a mobility shift assay. This process identified a lead aptamer candidate termed EAP1-05 with low nanomolar affinity and high specificity for EPX over other common sputum proteins. This aptamer sequence was further optimized through truncation and used to develop an easy-to-use colourimetric pull-down assay that can detect EPX over a concentration range from 1 - 100 nM in processed sputum. Forty-six clinical samples were processed using a new sputum dispersal method, appropriate for a rapid assessment assay, that avoids centrifugation and lengthy processing times. The assay showed 89% sensitivity and 96% specificity to detect eosinophilia (compared to gold standard sputum cytometry), with results being produced in under an hour. This assay could allow for an easy assessment of eosinophil activity in the airway to guide anti-inflammatory therapy for several airway diseases.

A Lateral Flow Test for Staphylococcus aureus in Nasal Mucus Using a New DNAzyme as the Recognition Element.

Detection of pathogenic bacteria in complex biological matrices remains a major challenge. Herein, we report the selection and optimization of a new DNAzyme for Staphylococcus aureus (SA) and the use of the DNAzyme to develop a simple lateral flow device (LFD) for detection of SA in nasal mucus. The DNAzyme was generated by in vitro selection using a crude extra/intracellular mixture derived from SA, which could be used directly for simple solution or paper-based fluorescence assays for SA. The DNAzyme was further modified to produce a DNA cleavage fragment that acted as a bridging element to bind DNA-modified gold nanoparticles to the test line of a LFD, producing a simple colorimetric dipstick test. The LFD was evaluated with nasal mucus samples spiked with SA, and demonstrated that SA detection was possible in minutes with minimal sample processing.

Single-Step Printable Hydrogel Microarray Integrating Long-Chain DNA for the Discriminative and Size-Specific Sensing of Nucleic Acids.

A simple approach to fabricating hydrogel-based DNA microarrays is reported by physically entrapping the rolling circle amplification (RCA) product inside printable in situ gelling hydrazone cross-linked poly(oligoethylene glycol methacrylate) hydrogels. The hydrogel-printed RCA microarray facilitates improved RCA immobilization (>65% even after vigorous washing) and resistance to denaturation relative to RCA-only printed microarrays in addition to size-discriminative sensing of DNA probes (herein, 27 or fewer nucleotides) depending on the internal porosity of the hydrogel. Furthermore, the high number of sequence repeats in the concatemeric RCA product enables high-sensitivity detection of complementary DNA probes without the need for signal amplification, with signal/noise ratios of 10 or more achieved over a short 30 min assay time followed by minimal washing. The inherent antifouling properties of the hydrogel enable discriminative hybridization in complex biological samples, particularly for short (∼10 nt) oligonucleotides whose hybridization in other assays tends to be transient and of low affinity. The scalable manufacturability and efficient performance of these hydrogel-printed RCA microarrays thus offer potential for rapid, parallel, and inexpensive sensing of short DNA/RNA biomarkers and ligands, a critical current challenge in diagnostic and affinity screening assays.

A DNAzyme-Based Colorimetric Paper Sensor for Helicobacter pylori.

The reliable detection of pathogenic bacteria in complex biological samples using simple assays or devices remains a major challenge. Herein, we report a simple colorimetric paper device capable of providing specific and sensitive detection of Helicobacter pylori (H. pylori), a pathogen strongly linked to gastric carcinoma, gastric ulcers, and duodenal ulcers, in stool samples. The sensor molecule, an RNA-cleaving DNAzyme obtained through in vitro selection, is activated by a protein biomarker from H. pylori. The colorimetric paper sensor, designed on the basis of the RNA-cleaving property of the DNAzyme, is capable of sensitive detection of H. pylori in human stool samples with minimal sample processing and provides results in minutes. It remains fully functional under storage at ambient temperature for at least 130 days. This work lays a foundation for developing DNAzyme-enabled paper-based point-of-care diagnostic devices for monitoring pathogens in complex samples.

Enzymatic Litmus Test for Selective Colorimetric Detection of C-C Single Nucleotide Polymorphisms.

A paper based litmus test has been developed using modulation of urease enzyme activity for detection of C-C mismatch single nucleotide polymorphisms (SNPs) by the naked eye. Urease is first inactivated with silver ions and printed onto paper microzones. Addition of DNA containing C-C mismatches reactivates urease via binding of Ag(I), allowing restoration of urease activity, hydrolysis of urea to produce ammonia, and an increase in pH, which is monitored colorimetrically using a pH indicator with a limit of detection of 11 nM DNA in 40 min. The assay system is easy to use, portable, and stable for at least 30 days at ambient temperature. To assess the versatility and practical application of the paper sensor, we used it to identify a G > C transversion present in human genomic DNA from a ductal carcinoma cell line, a mutation commonly found in breast cancer. We believe this new assay system has the potential to be a low-cost method for rapidly identifying DNA with the C-C mismatch SNP as a means of cancer screening in resource-limited areas.

A Simple DNAzyme-Based Fluorescent Assay for Klebsiella pneumoniae.

Pathogenic bacteria pose a serious threat to public health, and the rapid and cost-effective detection of such bacteria remains a major challenge. Herein, we present a DNAzyme-based fluorescent paper sensor for Klebsiella pneumoniae. The DNAzyme was generated by an in vitro selection technique to cleave a fluorogenic DNA-RNA chimeric substrate in the presence of K. pneumoniae. The DNAzyme was printed on a paper substrate in a 96-well format to serve as mix-and-read fluorescent assay that exhibits a limit of detection (LOD) 105  CFUs mL-1 . Evaluated with 20 strains of clinical bacterial isolates, the DNAzyme produced the desired fluorescence signal with the samples of K. pneumoniae, regardless of their source or drug resistance. The assay is simple to use, rapid, inexpensive, and avoids the complex procedures of sample preparation and equipment. We believe that this DNAzyme-based fluorescent assay has potential for practical applications to identify K. pneumoniae.

Sentinel Wraps: Real-Time Monitoring of Food Contamination by Printing DNAzyme Probes on Food Packaging.

Here, we report the development of a transparent, durable, and flexible sensing surface that generates a fluorescence signal in the presence of a specific target bacterium. This material can be used in packaging, and it is capable of monitoring microbial contamination in various types of food products in real time without having to remove the sample or the sensor from the package. The sensor was fabricated by covalently attaching picoliter-sized microarrays of an E. coli-specific RNA-cleaving fluorogenic DNAzyme probe (RFD-EC1) to a thin, flexible, and transparent cyclo-olefin polymer (COP) film. Our experimental results demonstrate that the developed (RFD-EC1)-COP surface is specific, stable for at least 14 days under various pH conditions (pH 3-9), and can detect E. coli in meat and apple juice at concentrations as low as 103 CFU/mL. Furthermore, we demonstrate that our sensor is capable of detecting bacteria while still attached to the food package, which eliminates the need to manipulate the sample. The developed biosensors are stable for at least the shelf life of perishable packaged food products and provide a packaging solution for real-time monitoring of pathogens. These sensors hold the potential to make a significant contribution to the ongoing efforts to mitigate the negative public-health-related impacts of food-borne illnesses.

A printable hydrogel microarray for drug screening avoids false positives associated with promiscuous aggregating inhibitors.

A significant problem in high-throughput drug screening is the disproportionate number of false hits associated with drug candidates that form colloidal aggregates. Such molecules, referred to as promiscuous inhibitors, nonspecifically inhibit multiple enzymes and are thus not useful as potential drugs. Here, we report a printable hydrogel-based drug-screening platform capable of non-ambiguously differentiating true enzyme inhibitors from promiscuous aggregating inhibitors, critical for accelerating the drug discovery process. The printed hydrogels can both immobilize as well as support the activity of entrapped enzymes against drying or treatment with a protease or chemical denaturant. Furthermore, the printed hydrogel can be applied in a high-throughput microarray-based screening platform (consistent with current practice) to rapidly ( <25 min) and inexpensively identify only clinically promising lead compounds with true inhibitory potential as well as to accurately quantify the dose-response relationships of those inhibitors, all while using 95% less sample than required for a solution assay.

Choosing mineral flotation collectors from large nanoparticle libraries.

Polystyrene nanoparticles can promote froth flotation of mineral particles if the nanoparticles are sufficiently hydrophobic and are colloidally stable in the high ionic strength solutions typical of commercial flotation operations. A library of 80 unique polystyrene nanoparticle types was prepared with click chemistry and used to determine if particles that were sufficiently hydrophilic to be colloidally stable in high ionic strength and high pH solutions, were also capable of promoting flotation. The conflicting requirements of colloidal stability and hydrophobicity can be achieved in 9 mM sodium carbonate, a very challenging environment. Instead of testing all 80 samples with laborious flotation testing, automated assays measuring colloid stability and nanoparticle hydrophobicity were employed. The colloid stability assay measured the critical coagulation concentrations (CCC). Nanoparticle hydrophobicity was characterized by water contact angle, measurements (CA). A smaller cohort of the most promising nanoparticle candidates for detailed flotation testing were identified by mapping nanoparticle properties on the CA versus CCC plain - a "Flotation Domain Diagram". We believe that this work was the first time that combinatorial synthesis and high throughput screening have been used in the development of flotation chemicals. Finally, based on the accumulated evidence, effective nanoparticle flotation collectors are likely to be ∼50 nm in diameter, with a soft hydrophobic polymer shell and with surface functional group densities in the order of magnitude of 0.1 nm-2.

Long-Term Preservation of Bacteriophage Antimicrobials Using Sugar Glasses.

The antimicrobial activity of LISTEX P100, Salmonella CG4, and E. coli AG10 bacteriophages were preserved in pullulan-trehalose mixture as dried films and as coatings on food packaging. The phages encapsulated in pullulan-trehalose films were able to retain infectivity for up to 3 months at ambient storage conditions. Various buffers, disaccharides and disaccharide concentrations were investigated to optimize the long-term stability of the phages in the films. It was found that pullulan and trehalose need to be simultaneously present in the film to provide the stabilizing effect and that the presence of buffers that lead to the formation of crystals in the films must be avoided for phage activity to be maintained. Overall, this study describes a method of preserving bacteriophage activity in a dried format that has great potential for use as coatings, which can be used to create antimicrobial surfaces for food preparation and for food preservation.

A Printed Multicomponent Paper Sensor for Bacterial Detection.

We present a simple all-in-one paper-based sensor for E. coli detection using a composite ink made of a fluorogenic DNAzyme probe for bacterial recognition and signal generation, lysozyme that lyses whole bacterial cells, and pullulan/trehalose sugars that stabilize printed bioactive molecules. The paper sensor is capable of producing a fluorescence signal as a readout within 5 minutes upon contacting E. coli, can achieve a limit of detection of 100 cells/mL, in a variety of sample matrixes, without sample enrichment, and remains stable for at least 6 months when stored at ambient temperature. Therefore, this simple paper sensor provides rapid bacterial testing on site, and can be shipped and stored under ambient conditions to benefit users living in resource-limited regions.

Relating Redox Properties of Polyvinylamine-g-TEMPO/Laccase Hydrogel Complexes to Cellulose Oxidation.

The structure and electrochemical properties of adsorbed complexes based on mixtures of polyvinylamine-g-TEMPO (PVAm-T) and laccase were related to the ability of the adsorbed complexes to oxidize cellulose. PVAm-T10 with 10% of the amines bearing TEMPO moieties (i.e., DS = 10%), adsorbed onto gold sulfonate EQCM-D sensor surfaces giving a hydrogel film that was 7 nm thick, 89% water, and encasing laccase (200 mM) and TEMPO moieties (33 mM). For DS values >10%, all of the TEMPOs in the hydrogel film were redox-active in that they could be oxidized by the electrode. With hydrogel layers made with lower-DS PVAm-Ts, only about half of the TEMPOs were redox-active; 10% DS appears to be a percolation threshold for complete TEMPO-to-TEMPO electron transport. In parallel experiments with hydrogel complexes adsorbed onto regenerated cellulose films, the aldehyde concentrations increased monotonically with the density of redox-active TEMPO moieties in the adsorbed hydrogel. The maximum density of aldehydes was 0.24 µmol/m2, about 10 times less than the theoretical concentration of primary hydroxyl groups exposed on crystalline cellulose surfaces. Previous work showed that PVAm-T/laccase complexes are effective adhesives between wet cellulose surfaces when the DS is >10%. This work supports the explanation that TEMPO-to-TEMPO electron transport is required for the generation of aldehydes necessary for wet adhesion to PVAm.

A Colloidal Stability Assay Suitable for High-Throughput Screening.

A library of 32 polystyrene copolymer latexes, with diameters ranging between 53 and 387 nm, was used to develop and demonstrate a high-throughput assay using a 96-well microplate platform to measure critical coagulation concentrations, a measure of colloidal stability. The most robust assay involved an automated centrifugation-decantation step to remove latex aggregates before absorbance measurements, eliminating aggregate interference with optical measurements made through the base of the multiwell plates. For smaller nanoparticles (diameter <150 nm), the centrifugation-decantation step was not required as the interference was less than with larger particles. Parallel measurements with a ChemiDoc MP plate scanner gave indications of aggregation; however, the results were less sensitive than the absorbance measurements.

Digital quantification of miRNA directly in plasma using integrated comprehensive droplet digital detection.

Quantification of miRNAs in blood can be potentially used for early disease detection, surveillance monitoring and drug response evaluation. However, quantitative and robust measurement of miRNAs in blood is still a major challenge in large part due to their low concentration and complicated sample preparation processes typically required in conventional assays. Here, we present the 'Integrated Comprehensive Droplet Digital Detection' (IC 3D) system where the plasma sample containing target miRNAs is encapsulated into microdroplets, enzymatically amplified and digitally counted using a novel, high-throughput 3D particle counter. Using Let-7a as a target, we demonstrate that IC 3D can specifically quantify target miRNA directly from blood plasma at extremely low concentrations ranging from 10s to 10 000 copies per mL in ≤3 hours without the need for sample processing such as RNA extraction. Using this new tool, we demonstrate that target miRNA content in colon cancer patient blood is significantly higher than that in healthy donor samples. Our IC 3D system has the potential to introduce a new paradigm for rapid, sensitive and specific detection of low-abundance biomarkers in biological samples with minimal sample processing.

Facile supermolecular aptamer inhibitors of L-selectin.

Multivalent interactions occur frequently in nature, where they mediate high-affinity interactions between cells, proteins, or molecules. Here, we report on a method to generate multivalent aptamers (Multi-Aptamers) that target L-selectin function using rolling circle amplification (RCA). We find that the L-selectin Multi-Aptamers have increased affinity compared to the monovalent aptamer, are specific to L-selectin, and are capable of inhibiting interactions with endogenous ligands. In addition, the Multi-Aptamers efficiently inhibit L-selectin mediated dynamic adhesion in vitro and homing to secondary lymphoid tissues in vivo. Importantly, our method of generating multivalent materials using RCA avoids many of the challenges associated with current multivalent materials in that the Multi-Aptamers are high affinity, easily produced and modified, and biocompatible. We anticipate that the Multi-Aptamers can serve as a platform technology to modulate diverse cellular processes.

Nucleic acid aptamers in cancer research, diagnosis and therapy.

Aptamers are single-stranded DNA or RNA oligomers, identified from a random sequence pool, with the ability to form unique and versatile tertiary structures that bind to cognate molecules with superior specificity. Their small size, excellent chemical stability and low immunogenicity enable them to rival antibodies in cancer imaging and therapy applications. Their facile chemical synthesis, versatility in structural design and engineering, and the ability for site-specific modifications with functional moieties make aptamers excellent recognition motifs for cancer biomarker discovery and detection. Moreover, aptamers can be selected or engineered to regulate cancer protein functions, as well as to guide anti-cancer drug design or screening. This review summarizes their applications in cancer, including cancer biomarker discovery and detection, cancer imaging, cancer therapy, and anti-cancer drug discovery. Although relevant applications are relatively new, the significant progress achieved has demonstrated that aptamers can be promising players in cancer research.

Examination of bacterial inhibition using a catalytic DNA.

Determination of accurate dosage of existing antibiotics and discovery of new antimicrobials or probiotics entail simple but effective methods that can conveniently track bacteria growth and inhibition. Here we explore the application of a previously reported fluorogenic E. coli-specific DNAzyme (catalytic DNA), RFD-EC1, as a molecular probe for monitoring bacterial inhibition exerted by antibiotics and for studying bacterial competition as a result of cohabitation. Because the DNAzyme method provides a convenient way to monitor the growth of E. coli, it is capable of determining the minimal inhibitory concentration (MIC) of antibiotics much faster than the conventional optical density (OD) method. In addition, since the target for RFD-EC1 is an extracellular protein molecule from E. coli, RFD-EC1 is able to identify pore-forming antibiotics or compounds that can cause membrane leakage. Finally, RFD-EC1 can be used to analyse the competition of cohabitating bacteria, specifically the inhibition of growth of E. coli by Bacillus subtilis. The current work represents the first exploration of a catalytic DNA for microbiological applications and showcases the utility of bacteria-sensing fluorogenic DNAzymes as simple molecular probes to facilitate antibiotic and probiotic research.

Rapid detection of single bacteria in unprocessed blood using Integrated Comprehensive Droplet Digital Detection.

Blood stream infection or sepsis is a major health problem worldwide, with extremely high mortality, which is partly due to the inability to rapidly detect and identify bacteria in the early stages of infection. Here we present a new technology termed 'Integrated Comprehensive Droplet Digital Detection' (IC 3D) that can selectively detect bacteria directly from milliliters of diluted blood at single-cell sensitivity in a one-step, culture- and amplification-free process within 1.5-4 h. The IC 3D integrates real-time, DNAzyme-based sensors, droplet microencapsulation and a high-throughput 3D particle counter system. Using Escherichia coli as a target, we demonstrate that the IC 3D can provide absolute quantification of both stock and clinical isolates of E. coli in spiked blood within a broad range of extremely low concentration from 1 to 10,000 bacteria per ml with exceptional robustness and limit of detection in the single digit regime.

DNA-scaffolded multivalent ligands to modulate cell function.

We report a simple, versatile, multivalent ligand system that is capable of specifically and efficiently modulating cell-surface receptor clustering and function. The multivalent ligand is made of a polymeric DNA scaffold decorated with biorecognition ligands (i.e., antibodies) to interrogate and modulate cell receptor signaling and function. Using CD20 clustering-mediated apoptosis in B-cell cancer cells as a model system, we demonstrated that our multivalent ligand is significantly more effective at inducing apoptosis of target cancer cells than its monovalent counterpart. This multivalent DNA material approach represents a new chemical biology tool to interrogate cell receptor signaling and functions and to potentially manipulate such functions for the development of therapeutics.