Shear bond strengths of brackets bonded with a new self-adhering resin composite.

PURPOSE: To determine the shear bond strength (SBS) of orthodontic brackets bonded with a self-adhering resin composite. METHODS: 45 freshly extracted mandibular incisors were randomly divided into 3 groups (n = 15 per group). Brackets were bonded with 3 bonding systems and cured with an LED light. Brackets were bonded with a new self-adhering resin cement in the study group. A conventional etch-and-rinse adhesive system and a self-etching adhesive system were used for comparison. After bonding, the SBS of the brackets were tested with a universal testing machine. RESULTS: Analysis of variance indicated a significant difference between groups (p<0.001). The highest values for SBS were measured in group I (21.80 ± 2.57 MPa). The SBS was significantly lower in groups II and III than in group I (P<.001). The lowest values for SBS were measured in group III (5.90 ± 0.90 MPa). SBS was significantly higher in group II than in group III (p<0.001). CONCLUSIONS: The self-adhering adhesive system showed a clinically insufficient SBS, whereas the SBS of conventional etch-and-rinse adhesive system and the self-etching adhesive system were significantly higher and clinically sufficient.

Comparative evaluation of shear bond strength of three flowable compomers on enamel of primary teeth: An in-vitro study.

BACKGROUND: The aim of the present study was to determine Shear bond strength (SBS) of different flowable compomers on the enamel surface of primary teeth. The null hypothesis to be tested was that none of the flowable compomer would differ significantly from the other two with respect to SBS. As a result, the tested materials that have the easiest application on child patient is preferred. MATERIAL AND METHODS: Sixty newly extracted non carious primary molars were selected. The buccal surface was cleaned and polished to obtain a flat enamel surface. The specimens were randomly divided into three groups of 20 teeth each, based on the flowable compomers applied, as follows: group I: Dyract Flow® (Dentsply, Konstanz, Germany); group II: Twinky Star Flow® (Voco, Cuxhaven, Germany); and group III: R&D Series Nova Compomer Flow® (Imicryl, Konya, Turkey). RESULTS: SBS in group II (6.78± 0.45 MPa) were significantly lower than groups I and III (8.30 ± 0.29 and 8.43 ± 0.66 MPa, respectively) (P<.001). No significant difference was found between groups I and III (P<.05). CONCLUSIONS: Significant differences existed between the SBS of the groups. Therefore, the null hypothesis was rejected. Flowable compomers can provide adequate SBS with self-etching system at restoration of primary teeth. Thus, successful restorations in pediatric patients can be done in a practical way. KEY WORDS: Flowable compomer, primary teeth, shear bond strength.

Evaluation of Changes in Lip Closing Force After Surgically Assisted Rapid Maxillary Expansion.

OBJECTIVE: Morphological changes in patients subjected to surgical treatment to correct occlusal discrepancies may lead to various functional changes. The aim of the present study was to evaluate changes in lip closing force after surgically assisted rapid maxillary expansion in skeletally mature patients. METHODS: The study involved 7 female and 7 male patients treated with surgically assisted rapid maxillary expansion. Maximum and minimum lip pressures of patients were measured with Lip De CumLDC-110R. The intercanine distance and incisors angulations were measured preoperatively (T0), at the end of the expansion (T1), at the end of the third month of retention (T2), and at the end of the sixth month of retention (T3). RESULTS: The greatest values of maximum and the minimum lip closing force were observed at the end of the expansion period significantly. The intercanine distance and inclinations of incisors measured at the third and sixth months showed a significant decrease. CONCLUSIONS: The present study demonstrated that, following surgically assisted rapid palatal expansion, both the maximum and the minimum lip closing force increases had a tendency to revert to their initial values 6 months after surgery.

In vitro evaluation of microleakage of class V cavities restored with new flowable compomers on the primary teeth.

INTRODUCTION: The aim of the study was to evaluate the in vitro microleakage of new flowable compomers in the class V cavities of primary teeth. METHODS: Thirty freshly extracted, non-carious, primary molars without visible defects were used in this study. Class V cavities (n = 60), with the occlusal and cervical margins located in the enamel, were prepared on the buccal and lingual surfaces. The samples were randomly divided into 3 groups of 20 each. Group 1: restored with Twinky Star Flow (Voco, Cuxhaven, Germany), Group 2: restored with Dyract Flow (Dentsply, Konstanz, Germany) and Group 3: restored with R&D Series Nova Compomer Flow (Imicryl, Konya, Turkey) according to the manufacturer's instructions. After a thermocycling regimen of 1000 cycles between 5°C and 55°C, the samples were isolated, immersed in 0.5% basic fuchsine solution for 24 h at 37°C and sectioned longitudinally in a buccolingual direction. The sections were evaluated for values of microleakage with a stereomicroscope. RESULTS: All materials showed microleakage but no statistically significant difference was observed among the groups (p>0.05). The highest microleakage score was observed in group II (1.65 ± 0.49) and group I (1.75 ± 0.44) at occlusal and gingival margins, respectively. CONCLUSIONS: Flowable compomers showed insignificantly least amount of microleakage in class V cavities prepared on primary molars.

Can brackets be bonded with a composite resin after expiration date?

INTRODUCTION: The aim of the study was to compare shear bond strengths of brackets bonded with a composite resin before and after expiration dates. METHODS: Forty-five freshly extracted premolar teeth were randomly divided into 3 groups of 15. Ormco Mini 2000 (Ormco Corp, Glendora, Calif) bicuspid metal brackets were used in the study. Group I: the brackets were bonded with Blugloo (Ormco Corp, Glendora, Calif) adhesive paste before the expiration date. Groups II and III: the brackets were bonded with same light cure composite resin 1 and 2 years after the expiration date. All of the groups were cured with a LED light. After bonding, the shear bond strengths of the brackets were tested with a universal testing machine. One-way ANOVA with post-hoc Tukey tests were used to compare shear bond strengths of the groups. The chi-square test was used to determine significant differences in the adhesive remnant index (ARI) scores between the groups. Significance for all statistical tests was predetermined at p<0.05. RESULTS: No statistically significant difference was found in shear bond strengths and ARI scores between three groups (p<0.05). There was a greater frequency of ARI scores of 2 and 3 and 4 in all groups. CONCLUSIONS: Expiration dates do not have a significant effect on the shear bond strength of the composite material. Further studies are needed to investigate in other ways such as cytotoxicity of the composite resins after expiration date.

Microleakage under orthodontic brackets bonded with different adhesive systems.

OBJECTIVE: This in vitro study aimed to compare the microleakage of orthodontic brackets between enamel-adhesive and adhesive-bracket interfaces at the occlusal and gingival margins bonded with different adhesive systems. MATERIALS AND METHODS: A total of 144 human maxillary premolar teeth extracted for orthodontic reasons was randomly divided into four groups. Each group was then further divided into three sub-groups. Three total-etching bonding systems (Transbond XT, Greengloo and Kurasper F), three one-step self-etching bonding systems (Transbond Plus SEP, Bond Force and Clearfil S3), three two-step self-etching bonding systems (Clearfil SE Bond, Clearfil Protectbond and Clearfil Liner Bond), and three self-adhesive resin cements (Maxcem Elite, Relyx U 100 and Clearfil SA Cement) were used to bond the brackets to the teeth. After bonding, all teeth were sealed with nail varnish and stained with 0.5% basic fuchsine for 24 h. All samples were sectioned and examined under a stereomicroscope to score for microleakage at the adhesive-enamel and adhesive-bracket interfaces from both occlusal and gingival margins. STATISTICAL ANALYSIS USED: Statistical analyses were performed with Kruskal-Wallis and Wilcoxon signed-rank tests. RESULTS: The results indicate no statistically significant differences between the microleakage scores of the adhesives; microleakage was detected in all groups. Comparison of the average values of the microleakage scores in the enamel-adhesive and adhesive-bracket interfaces indicated statistically significant differences (P < 0.05). The amount of the microleakage was higher at the enamel-adhesive interface than at the bracket-adhesive interface. CONCLUSIONS: All of the brackets exhibited some amount of microleakage. This result means that microleakage does not depend on the type of adhesive used.

Effects of contamination by either blood or a hemostatic agent on the shear bond strength of orthodontic buttons.

OBJECTIVE: To evaluate the effects of contamination by either blood or a hemostatic agent on the shear bond strength (SBS) of orthodontic buttons. METHODS: We used 45 freshly extracted, non-carious, impacted third molars that were divided into 3 groups of 15. Each tooth was etched with 37% phosphoric acid gel for 30 s. Human blood or the blood stopper agent was applied to the tooth surface in groups I and II, respectively. Group III teeth were untreated (controls). Orthodontic buttons were bonded to the teeth using light-curing composite resin. After bonding, the SBS of the button was determined using a Universal testing machine. Any adhesive remaining after debonding was assessed and scored according to the modified adhesive remnant index (ARI). ANOVA with post-hoc Tukey's test was used to determine significant differences in SBS and Fisher's exact test, to determine significant differences in ARI scores among groups. RESULTS: ANOVA indicated a significant difference between groups (p < 0.001). The highest SBS values were measured in group III (10.73 ± 0.96 MPa). The SBS values for teeth in groups I and II were significantly lower than that of group III (p < 0.001). The lowest SBS values were observed in group I teeth (4.17 ± 1.11 MPa) (p < 0.001). CONCLUSIONS: Contamination of tooth surfaces with either blood or hemostatic agent significantly decreased the SBS of orthodontic buttons. When the contamination risk is high, it is recommended to use the blood stopper agent when bonding orthodontic buttons on impacted teeth.

Effect of fluoride on root resorption following heavy and light orthodontic force application for 4 weeks and 12 weeks of retention.

OBJECTIVE: To evaluate the null hypothesis that fluoride intake via drinking water has no effect on orthodontic root resorption in humans after orthodontic force application for 4 weeks and 12 weeks of retention. MATERIALS AND METHODS: Forty-eight patients who required maxillary premolar extractions as part of their orthodontic treatment were selected from two cities in Turkey. These cities had a high and low fluoride concentration in public water of ≥2 pm and ≤0.05 pm, respectively. The patients were randomly separated into four groups of 12 each: group 1HH, high fluoride (≥2 ppm) and heavy force (225 g); group 2LH, low fluoride (≤0.05 ppm) and heavy force; group 3HL, high fluoride and light force (25 g); and group 4LL, low fluoride and light force. Light or heavy buccal tipping force was applied on the upper first premolars for 28 days. At day 28, the left premolars were extracted (positive control side); the right premolars (experimental side) were extracted after 12 weeks of retention. The samples were analyzed with microcomputed tomography. RESULTS: On the positive control side, under heavy force application, the high fluoride groups exhibited less root resorption (P  =  .015). On the experimental side, it was found that fluoride reduced the total volume of root resorption craters; however, this effect was not statistically significant (P  =  .237). Moreover, the results revealed that under heavy force application experimental teeth exhibited more root resorption than positive control groups. CONCLUSION: The null hypothesis could not be rejected. High fluoride intake from public water did not have a beneficial effect on the severity of root resorption after a 4-week orthodontic force application and 12 weeks of passive retention.

Effects of different bleaching methods on shear bond strengths of orthodontic brackets.

OBJECTIVE: To evaluate the effects of different bleaching methods on the shear bond strength (SBS) of orthodontic brackets. MATERIALS AND METHODS: Forty-five freshly extracted premolars were randomly divided into three groups (n = 15 per group). In group I, bleaching was performed with the office bleaching method. In group II, bleaching was performed with the home bleaching method. Group III served as the control. Orthodontic brackets were bonded with a light cure composite resin and cured with an LED light. After bonding, the SBS of the brackets were tested with a Universal testing machine. RESULTS: Analysis of variance indicated a significant difference between groups (P < .001). The highest values for SBS were measured in group III (20.99 ± 2.32 MPa). The SBS was significantly lower in groups I and II than in group III (P < .001). The lowest values for SBS were measured in group II (6.42 ± 0.81 MPa). SBS was significantly higher in group I than in group II (P < .001). CONCLUSIONS: Both of the bleaching methods significantly affected the SBS of orthodontic brackets on human enamel. Bleaching with the home bleaching method affected SBS more adversely than did bleaching with the office bleaching method.

Effects of different intracoronal bleaching methods on shear bond strengths of orthodontic brackets.

OBJECTIVE: To evaluate the effects of different intracoronal bleaching methods on the shear bond strengths (SBS) of orthodontic brackets. MATERIALS AND METHODS: Sixty freshly extracted mandibular incisors were randomly divided into four groups (n = 15 per group). After filling the root canals, root fillings were removed 2 mm apical to the cementoenamel junction, and a 2-mm-thick layer of zinc-phosphate cement base was applied. Group 1 served as the control. Intracoronal bleaching was performed with hydrogen peroxide (Opalacence Endo, Ultradent products Inc, South Jordan, Utah) in group 2, sodium perborate (Sultan Healthcare, Englewood, NJ) in group 3, and 37% carbamide peroxide (Whiteness Super Endo, Dentscare, ltda, Joinville, Brazil) in group 4. Orthodontic brackets were bonded with a light cure composite resin and cured with an LED light. After bonding, the SBS of the brackets was tested with a Universal testing machine. RESULTS: Analysis of variance indicated a significant difference between groups (P < .001). The highest values for SBS were measured in group 1 (10.15 ± 1.15 MPa). The SBS was significantly lower in groups 2, 3, and 4 than in group 1 (P < .001). The lowest values for SBS were measured in group 3 (6.17 ± 0.85 MPa). SBS was significantly higher in group 4 than in group 3 (P < .05). CONCLUSIONS: Intracoronal bleaching significantly affected the SBS of orthodontic brackets on human enamel. Bleaching with sodium perborate affects SBS more adversely than does bleaching with other agents.

Comparison of the effects of rapid maxillary expansion and surgically assisted rapid maxillary expansion in the sagittal, vertical and transverse planes

Objective: The aim of this study was to evaluate and compare the effects of rapid maxillary expansion (RME) and surgically assisted RME (SARME) in the sagittal, vertical, and transverse planes. Study design: Orthodontic records of 28 patients were selected retrospectively and divided into two treatment groups. Group 1 comprised 14 patients (4 boys, 10 girls, mean age 14.2 ± 0.74 years) who had been treated with RME. Group 2 comprised 14 patients (4 boys, 10 girls, mean age 19.6 ± 2.73 years) who had been treated with SARME. Measurements were performed on lateral and posteroanterior cephalograms and dental casts obtained before (T0) and after (T1) expansion. Results: Statistically significant differences were found in soft tissue convexity angle, anterior face height, and upper nasal width in group 1, and in U1-NA length and posterior face height measurements in group 2 (P<.05). In both groups significant increases were found in interpremolar, intermolar, maxillary, and lower nasal widths and in anterior lower face height (P<.01). Statistically significant intergroup differences were found in the ANB angle(P<.05) and maxillary intercanine (P<.01) measurements. Conclusion: With both RME and SARME, successful expansion of maxillary dentoalveolar structures and nasalcavity and palatal widening were achieved. Sagittal plane effects of SARME were similar to those of RME on dental skeletal and airway measurements (AU)

Physical properties of root cementum: part 20. Effect of fluoride on orthodontically induced root resorption with light and heavy orthodontic forces for 4 weeks: a microcomputed tomography study.

INTRODUCTION: The major side effect of orthodontic treatment is orthodontically induced inflammatory root resorption. Fluoride was previously shown to reduce the volume of the root resorption craters in rats. However, the effect of fluoride on orthodontically induced inflammatory root resorption in humans has not yet been investigated. The aim of this study was to investigate the effect of high and low amounts of fluoride intake from birth on orthodontically induced inflammatory root resorption under light (25 g) and heavy (225 g) force applications. METHODS: Forty-eight patients who required maxillary premolar extractions as part of their orthodontic treatment were selected from 2 cities in Turkey with high and low fluoride concentrations in the public water of ≥ 2 and ≤ 0.05 ppm, respectively. The patients were randomly separated into 4 groups of 12 each: group 1, high fluoride intake and heavy force; group 2, low fluoride intake and heavy force; group 3, high fluoride intake and light force; and group 4, low fluoride intake and light force. Light or heavy buccal tipping orthodontic forces were applied on the maxillary first premolars for 28 days. At day 28, the teeth were extracted, and the samples were analyzed with microcomputed tomography. RESULTS: Fluoride reduced the volume of root resorption craters in all groups; however, this effect was significantly different with high force application (P = 0.015). It was also found that light forces caused less root resorption than heavy forces. There was no statistical difference in the amount of root resorption observed on root surfaces (buccal, lingual, mesial, and distal) in all groups. However, the middle third of the roots showed the least root resorption. With high fluoride intake and heavy force application, less root resorption was found in all root surfaces and root thirds. CONCLUSIONS: Fluoride may reduce the volume of root resorption craters. This effect is significant with heavy force applications (P <0.05). The cervical and apical thirds of the root showed significantly greater root resorption after the application of buccal tipping force for 4 weeks.

Effects of fluorosis on the shear bond strength of orthodontic brackets bonded with a self-etching primer.

The aim of this study was to compare the shear bond strength (SBS) of brackets bonded to fluorosed and non-fluorosed teeth with self-etching primer (SEP) and phosphoric acid (PA). The study involved 40 mildly fluorosed [Thylstrup-Fejerskov (TFT) Index = 1-3] and 40 non-fluorosed human premolar teeth. The fluorosed and non-fluorosed teeth were randomly divided into two subgroups. In the first subgroup, 37 per cent PA was applied for 30 seconds and in the second, a SEP (Transbond Plus) was used. The brackets were bonded with light-cure adhesive paste (Transbond XT) and cured for 20 seconds. The SBSs were measured after 1000 thermocyclies. Two-way analysis of variance, Tukey's multiple comparison test, and Weibull analysis were used for the evaluation of SBS values. Bond failure locations were determined with the adhesive remnant index (ARI) and were compared with the Kruskal-Wallis and Mann-Whitney U-tests. The mean SBS was 9.01 MPa for the fluorosed teeth bonded with SEP. This value was significantly different from those of fluorosed teeth etched with PA (15.22 MPa) and non-fluorosed teeth conditioned with SEP (12.95 MPa) and PA (15.37 MPa). The ARI scores of the fluorosed teeth conditioned with SEP were significantly lower than those of non-fluorosed teeth conditioned with SEP or PA. The results of this in vitro study suggest that there are no differences in the SBS of orthodontic brackets between mildly fluorosed and non-fluorosed enamel etched with 37 per cent PA for 30 seconds. The SEP showed lower SBS values for orthodontic brackets bonded to mildly fluorosed enamel. The findings provide some evidence that routine clinical use of a SEP to bond brackets to mildly fluorosed teeth cannot be supported.

The effect of fluoride on orthodontic tooth movement in humans. A two- and three-dimensional evaluation.

AIMS: The aim of the present study was to determine whether high and low fluoride concentrations in drinking water affected the early stages of tooth movement when heavy and light orthodontic forces were applied for 4 weeks. A further aim was to compare and evaluate the resulting two-dimensional (2-D) and three-dimensional (3-D) orthodontic tooth movement. METHODS: The sample consisted of 96 maxillary upper first premolars from 48 patients who required premolar extractions as part of their orthodontic treatment. Patients were selected from two different cities in Turkey with low and high fluoride concentrations of 0.05 and 2 ppm, respectively. The patient sample was divided into four groups according to the magnitude of force applied to the first premolars and the concentration of fluoride in the public water supply; Group 1, High fluoride intake (> or = 2 ppm)-Heavy force (225 g); Group 2, Low fluoride intake (< or = 0.05 ppm)-Heavy force; Group 3, High fluoride intake-Light force (25 g); and Group 4, Low fluoride intake-Light force. A light or heavy buccal tipping orthodontic force was applied to the upper first premolars for 4 weeks. The first three palatal rugae were used for the superimposition of patient casts in a 2-D and 3-D evaluation of generated movements. RESULTS: It was found that heavy force application and fluoride intake increased the average rate of tooth movement. It was further shown that age was negatively correlated with tooth movement in the 2-D and 3-D measurements. CONCLUSIONS: The average rate of tooth movement was found to be greater in the heavy force and high fluoride intake group (Group 1HH). Age was negatively correlated with orthodontic tooth movement. Two- and three-dimensional methods were accurate for the assessment of tooth movement after four weeks of buccal tipping force application when the palatal rugae were used for superimposition.

In vitro evaluation of shear bond strengths of colour change adhesives.

The aims of this study were to test whether the shear bond strengths (SBS) of three commercially available colour change adhesives (CCAs), Transbond Plus Color Change Adhesive, Grengloo, and Blugloo, are different and to compare their bond strengths with a traditional light cure adhesive, Light Bond. Forty-eight human permanent premolar teeth extracted for orthodontic reasons and without any caries or visible defects were used in this study. The brackets were bonded with Light Bond (group I), Grengloo (group II), Blugloo (group III), and Transbond Plus CCA (group IV). After bonding, the SBS of the brackets were tested with a Universal testing machine. Analysis of variance indicated a significant difference between groups I and IV (P < 0.001). No significant difference was found between groups II, III, and IV (P > 0.05). Adhesive remnant index (ARI) scores for all groups were not significantly different (P > 0.05). Significant difference existed between the SBS of Transbond Plus CCA and Light Bond. Although Transbond Plus CCA yielded the lowest SBS values, no statistically significant difference was found between bond strength values of the three commercially available CCAs. All three CCAs can be safely used in orthodontic practice since they yielded acceptable bond strengths. A higher incidence of ARI scores 4 and 5 revealed that bond failures in all test groups were mainly at the adhesive interface.

Effects of fluorosis and self etching primers on shear bond strengths of orthodontic brackets.

OBJECTIVES: To evaluate the effects fluorosis and self etching primers (SEP) on shear bond strengths (SBS) of orthodontic brackets. METHODS: A total of 48 (24 fluorosed and 24 non-fluorosed) non-carious freshly extracted human permanent premolar teeth were used in this study. Fluorosed teeth were selected according to the modified Thylstrup and Fejerskov index (TFI), which is based on the clinical changes in fluorosed teeth. Fluorosed and non-fluorosed teeth were randomly assigned to 4 groups of 12 each. In groups I (non-fluorosed teeth) and II (fluorosed teeth), standard etching protocol was used and brackets were bonded with Light Bond. In groups III (non-fluorosed teeth) and IV (fluorosed teeth), Transbond Plus SEP was used and brackets were bonded with Transbond XT Light Cure Adhesive. All specimens were cured with a halogen light. After bonding, SBS of the brackets were tested with Universal testing machine. After debonding, all teeth and brackets in the test groups were examined under 10x magnifications. Any adhesive remained after debonding was assessed and scored according to the modified Adhesive Remnant Index (ARI). RESULTS: ANOVA indicated a significant difference between groups (P<.001). SBS in group II (Light Bond+Fluorosis) were significantly lower than other groups. ARI scores of the groups were also significantly different (P<.001). There was a greater frequency of ARI scores of 1,2 and 3 in group II (Light Bond+Fluorosis). CONCLUSIONS: When standard etching protocol was used enamel fluorosis significantly decreased the bond strength of orthodontic brackets. Satisfactory bond strengths were obtained when SEP was used for bonding brackets to the fluorosed teeth.