Anion-Exchange Electrospun Mixed-Matrix Polymer Fibers of Colesevelam for Water Treatment.

Novel anion-exchange electrospun fiber membranes of polycaprolactone doped with the cationic, cross-linked colesevelam polymer are reported. The weight fraction of cross-linked cationic colesevelam polymer, as the active phase within the PCL matrix, can readily be controlled in the synthesis of the mixed-matrix fibers (Cole@PCL), enabling optimization of the ion-exchange properties of the resulted membranes. This approach enabled adaptation of anion-exchange resins to a permeable, flexible membrane form, which is a significant advancement toward futuristic water treatment applications, demonstrated herein for the removal of trace contaminants, including nitrates and phosphates, as well as anionic dyes. The Cole@PCL membranes demonstrated the dependence of contaminant uptake on the weight percentage of colesevelam in the mixed-matrix membrane. An optimal 10 wt % of colesevelam was identified, demonstrating a staggering ion removal capacity of 155.8 mg/g for nitrate, 177.6 mg/g for phosphate, and 70 mg/g for Methyl Orange.

Durable and recyclable MOF@polycaprolactone mixed-matrix membranes with hierarchical porosity for wastewater treatment.

With the fast-growing global water crisis, the development of novel technologies for water remediation and reuse is crucial. Industrial wastewater especially contains various toxic pollutants that pose an additional threat to the environment; thus, efficient removal of such contaminants can ensure safe reprocessing of industrial wastewater, thereby alleviating the demand for fresh water. Herein, we describe a novel and efficient approach for preparing porous polycaprolactone (PCL) membranes with a hierarchical architecture via a simple solvent/non-solvent methodology. A mixed-matrix membrane (MMM) was further constructed utilizing an amine-functionalized metal-organic framework as the sorbent filler nanoparticles and PCL as the polymer support matrix (MOF@PCL) for wastewater treatment applications. The MOF@PCL MMM demonstrated homogeneous morphology as well as exceptional performance towards the removal of both cationic (methylene blue, MB) and anionic (methyl orange, MO) organic dyes, where the maximum adsorption capacities reached 309 mg g-1 and 208 mg g-1, respectively. Kinetic and thermodynamic investigations revealed that the adsorption process was endothermic with a fast intraparticle diffusion rate constant. The MOF@PCL MMM also displayed excellent mechanical stability and recyclability, where the removal efficiency was maintained after 10 cycles.

Inhibition of Adherence and Biofilm Formation of Pseudomonas aeruginosa by Immobilized ZnO Nanoparticles on Silicone Urinary Catheter Grafted by Gamma Irradiation.

Nosocomial infections caused by microbial biofilm formation on biomaterial surfaces such as urinary catheters are complicated by antibiotic resistance, representing a common problem in hospitalized patients. Therefore, we aimed to modify silicone catheters to resist microbial adherence and biofilm formation by the tested microorganisms. This study used a simple direct method to graft poly-acrylic acid onto silicone rubber films using gamma irradiation to endow the silicone surface with hydrophilic carboxylic acid functional groups. This modification allowed the silicone to immobilize ZnO nanoparticles (ZnO NPs) as an anti-biofilm. The modified silicone films were characterized by FT-IR, SEM, and TGA. The anti-adherence ability of the modified silicone films was evidenced by the inhibition of biofilm formation by otherwise strong biofilm-producing Gram-positive, Gram-negative, and yeast clinical isolates. The modified ZnO NPs grafted silicone showed good cytocompatibility with the human epithelial cell line. Moreover, studying the molecular basis of the inhibitory effect of the modified silicone surface on biofilm-associated genes in a selected Pseudomonas aeruginosa isolate showed that anti-adherence activity might be due to the significant downregulation of the expression of lasR, lasI, and lecB genes by 2, 2, and 3.3-fold, respectively. In conclusion, the modified silicone catheters were low-cost, offering broad-spectrum anti-biofilm activity with possible future applications in hospital settings.

Designing bimetallic zeolitic imidazolate frameworks (ZIFs) for aqueous catalysis: Co/Zn-ZIF-8 as a cyclic-durable catalyst for hydrogen peroxide oxidative decomposition of organic dyes in water.

ZIF-8 is well known hybrid material that is self-assembled from inorganic and organic moieties. It has several potential applications due to its unique structure. One of these potential applications is in advanced oxidation processes (AOP) via a heterogeneous catalysis system. The use of modified ZIF-8/H2O2 for the destruction of the azo dye methyl orange (MO) is presented in this work to explore its efficacy. This work presents the bimetallic Co/Zn-ZIF-8 as an efficient catalyst to promote H2O2 oxidation of the MO dye. Co/Zn-ZIF-8 was synthesized through a hydrothermal process, and the pristine structure was confirmed using XRD, FTIR, and XPS. The Co/Zn-ZIF-8/H2O2 system successfully decolorized MO at the selected pH 6.5. It was found that more than 90% of MO (10 ppm) was degraded within only about 50 minutes. Proposed radical and redox mechanisms are presented for H2O2 decomposition where the redox mechanism is suggested to predominate via a Co(ii)/Co(iii) redox consecutive cyclic process.

Nine days extended release of adenosine from biocompatible MOFs under biologically relevant conditions.

Adenosine is a small molecule directly involved in maintaining homeostasis under pathological and stressful conditions. Due to its rapid metabolism, delivery vehicles capable of exhibiting extended release of adenosine are of paramount interest. Herein, we demonstrate a superior long-term (9 days) release profile of adenosine from biocompatible MOFs in a physiologically relevant environment. The key to the biocompatibility of MOFs is their stability under biologically relevant conditions. This study additionally highlights the interplay between the chemical stability of prototypal MOFs, assessed under physiological conditions, and their cytotoxicity profiles. Cytotoxicity of the prototypal Zn-based MOF (ZIF-8) and three Zr-based MOFs (UiO-66, UiO-66-NH2, and MOF-801) on six cell types was assessed. The cell types selected were valve interstitial cells (VICs), valve endothelial cells (VECs), adipose tissue-derived stem cells (ADSCs), and cell lines U937, THP1, and HeLa. Zr-based MOFs demonstrated a wide tolerance range in the cell culture cytotoxicity assays, demonstrating cell viability up to a very high dose of ∼1000 µg mL-1, as compared to ZIF-8 which showed notable cytotoxicity in as little as ∼100 µg mL-1 dose. This study demonstrates, for the first time, the utilization of biocompatible MOFs for adenosine delivery as well as establishes a direct link between structural instability in the cell culture medium and the observed cytotoxicity of the studied MOFs.

Stability of Monolithic MOF Thin Films in Acidic and Alkaline Aqueous Media.

In the context of thin film nanotechnologies, metal-organic frameworks (MOFs) are currently intensively explored in the context of both, novel applications and as alternatives to existing materials. When it comes to applications under relatively harsh conditions, in several cases it has been noticed that the stability of MOF thin films deviates from the corresponding standard, powdery form of MOFs. Here, we subjected SURMOFs, surface-anchored MOF thin films, fabricated using layer-by layer methods, to a thorough characterization after exposure to different harsh aqueous environments. The stability of three prototypal SURMOFs, HKUST-1, ZIF-8, and UiO-66-NH2 was systematically investigated in acidic, neutral, and basic environments using X-ray diffraction and electron microscopy. While HKUST-1 films were rather unstable in aqueous media, ZIF-8 SURMOFs were preserved in alkaline environments when exposed for short periods of time, but in apparent contrast to results reported in the literature for the corresponding bulk powders- not stable in neutral and acidic environments. UiO-66-NH2 SURMOFs were found to be stable over a large window of pH values.

Mixed-metal hybrid ultramicroporous material (HUM) precursor to graphene-supported tetrataenite as a highly active and durable NPG catalyst for the OER.

Current interest in investigating non-precious group (NPG) metals for catalyzing the oxygen evolution reaction (OER) has revealed that doping of Ni hydroxides with Fe results in the dramatic enhancement of catalytic activity. Herein, a facile pathway to construct tetrataenite, an NiFe alloy of extraterrestrial origin and to address the limited electrical conductivity of metal oxides/hydroxides by directly constructing them atop graphene sheets is described. In this approach, a one-pot, bottom-up assembly of hybrid ultramicroporous materials (HUMs) was carried out, in the presence of suspended graphene (G), to homogeneously deposit the HUMs on unmodified graphene sheets, affording HUMs@G. Single metal (SIFSIX-3-Ni@G) and mixed metal (SIFSIX-3-NiFe@G) HUMs can be readily synthesized from their respective metal salts to afford a well-designed catalyst for the OER. The pyrolysis of SIFSIX-3-NiFe@G resulted in the deposition of the nanoalloy tetrataenite on G, demonstrating an exceptionally low OER onset potential of 1.44 V vs. RHE and reduced overpotential at 10 mA cm-2 (η10 = 266 mV). The synergy between the composition of the active catalyst and the electronically conductive support was attained by designing a reaction system encoding the self-assembly of a crystalline pre-catalyst on G sheets.

ACE2 coding variants in different populations and their potential impact on SARS-CoV-2 binding affinity.

The susceptibility of different populations to SARS-CoV-2 infection is not yet understood. Here, we combined ACE2 coding variants' analysis in different populations and computational chemistry calculations to probe the effects on SARS-CoV-2/ACE2 interaction. ACE2-K26R; which is most frequent in Ashkenazi Jewish population decreased the SARS-CoV-2/ACE2 electrostatic attraction. On the contrary, ACE2-I468V, R219C, K341R, D206G, G211R increased the electrostatic attraction; ordered by binding strength from weakest to strongest. The aforementioned variants are most frequent in East Asian, South Asian, African and African American, European, European and South Asian populations, respectively.

Strong Interplay between Polymer Surface Charge and MOF Cage Chemistry in Mixed-Matrix Membrane for Water Treatment Applications.

Despite the large number of reports on the utilization of highly microporous solids, most relevant are metal-organic frameworks (MOFs), in different demanding applications, the successful hybridization of MOFs and moldable polymer matrices into flexible, water-permeable membranes exhibiting strong entanglement of the MOF and the polymer matrix properties is still lacking. We describe herein an efficient pathway to construct a mixed-matrix membrane (MMM) comprising a water-stable metal-organic framework (UiO-66-NH2), as the active sorbent, and cellulose acetate (CA), as the polymer matrix, to construct a flexible membrane for water treatment applications. The MOF@CA MMM demonstrated superior performance in terms of exceptional removal of organic dyes (both cationic and anionic species) as well as hexavalent Cr ions, compared to the control CA membrane. The recorded high uptake of the MOF@CA MMM for this wide array of contaminants demonstrated the accessibility of the MOF nanocages immobilized within the MMM, in contrast to the common perception that the polymer matrix might act as a physical barrier to block the accessibility of the MOF cages. The negative surface charge of the matrix exerted a notable action to affect the diffusion of the negatively charged contaminants to reach the active sorbent filler. Moreover, the formed membrane demonstrated high durability and recyclability with no detected loss of performance over numerous cycles. This approach outlines the ability to formulate one of the most water-stable MOFs, as exceptional microporous sorbent, into a usable membrane form compatible with real-life applications.

Liquid-Phase Quasi-Epitaxial Growth of Highly Stable, Monolithic UiO-66-NH2 MOF thin Films on Solid Substrates.

Invited for this month's cover is the group of Dr. Tawheed Hashem from the Karlsruhe Institute of Technology. The cover picture shows a successful synthesis of high quality, monolithic UiO-66-NH2 MOF thin films on diverse solid substrates via a low-temperature liquid phase epitaxy method. The achievement of continuous MOF-coatings with low defect densities and pronounced stability against high temperatures and hot water was proven. The new type of coatings clearly outperforms other reported types of MOF thin films. Read the full text of their Communication at https://doi.org/10.1002/open.201900324.

Liquid-Phase Quasi-Epitaxial Growth of Highly Stable, Monolithic UiO-66-NH2 MOF thin Films on Solid Substrates.

High quality, monolithic UiO-66-NH2 thin films on diverse solid substrates have been prepared via a low temperature liquid phase epitaxy method. The achievement of continuous films with low defect densities and great stability against high temperatures and hot water is proven, clearly outperforming other reported types of MOF thin films.

Microporous Metal-Organic Framework (MOF)-Based Composite Polymer Electrolyte (CPE) Mitigating Lithium Dendrite Formation in All-Solid-State-Lithium Batteries.

Poly(ethylene oxide) (PEO)-based composite polymer electrolytes (CPEs) containing the amine-functionalized, zirconium-based metal-organic framework @silica (UiO-66-NH2@SiO2) and lithium, LiN(CF3SO2)2 salt (LiTFSI) are prepared using a simple hot press method. The electrochemical properties such as compatibility of the electrolyte with the Li metal anode, Li transference number, and ionic conductivity are investigated for the different systems containing different relative concentrations of the additives. The incorporation of UiO-66-NH2@SiO2 in the PEO-LiTFSI matrix not only enhanced ionic conductivity by one order of magnitude but also offered better compatibility and suppressed the formation of lithium dendrites appreciably. X-ray photoelectron spectroscopy studies on post-cycled materials revealed the formation of lithium alkoxide (RO-Li) on the cathode and Li2O on the anode. The coin cell (2032-type) consisting of LiFePO4/CPE/Li with UiO-66-NH2@SiO2 as filler provided a discharge capacity of 151 mA h g-1 at 0.1 C-rate at 60 °C, measurably higher than control experiments utilizing SiO2 and UiO-66-NH2. The notable enhancement of electrochemical properties when incorporating the UiO-66-NH2@SiO2 at the CPE was attributed to formation of more uniform ion conduction pockets and channels within the PEO matrix, facilitated by the presence of the microporous UiO-66-NH2@SiO2. The enhanced distribution of microporous channels, where Li ions are assumed to percolate through within the matrix, is assumed to desirably reduce formation of Li dendrites by increasing diffusion channels and therefore reducing crystallization and growth of dendrites at the electrode surface.

Probing the Water Stability Limits and Degradation Pathways of Metal-Organic Frameworks.

A comprehensive model to describe the water stability of prototypical metal-organic frameworks (MOFs) is derived by combining different types of theoretical and experimental approaches. The results provide an insight into the early stages of water-triggered destabilization of MOFs and allow detailed pathways to be proposed for the degradation of different MOFs under aqueous conditions. The essential elements of the approach are computing the pKa values of coordinated water molecules and geometry relaxations. Variable-temperature and pH infrared spectroscopy techniques are used to corroborate the main findings. The model developed herein helps to explain stability limits observed for several prototypical MOFs, including MOF-5, HKUST-1, UiO-66, and MIL-101-Cr, in aqueous solutions, and thus, provides an insight into the possible degradation pathways in acidic and basic environments. The formation of a metal hydroxide through the autoprotolysis of metal-coordinated water molecules and the strength of carboxylate-metal interactions are suggested to be two key players that govern stability in basic and acidic media, respectively. The methodology presented herein can effectively guide future efforts, which are especially significant for in silico screening, for developing novel MOFs with enhanced aqueous stability.

Tuning the Chemical Environment within the UiO-66-NH2 Nanocages for Charge-Dependent Contaminant Uptake and Selectivity.

The remarkable water stability of Zr-carboxylate-based metal-organic frameworks (MOFs) stimulated considerable interest toward their utilization in aqueous phase applications. The origin of such stability is probed here through pH titration and pKa modeling. A unique feature of the Zr6(µ3-OH)4(µ3-O)4(RCO2)12 cluster is the Zr-bridging oxo/hydroxyl groups, demonstrating several pKa values that appear to provide for the water stability at a wide range of pH. Accordingly, the tunability of the cage/surface charge of the MOF can feasibly be controlled through careful adjustment of solution pH. Such high stability, and facile control over cage/surface charge, can additionally be augmented through introducing chemical functionalities lining the cages of the MOF, specifically amine groups in the UiO-66-NH2 presented herein. The variable protonation states of the Zr cluster and the pendant amino groups, their H-bond donor/acceptor characteristics, and their electrostatic interactions with guest molecules were effectively utilized in controlled experiments to demonstrate high uptake of model guest molecules (137 mg/g for Cr(VI), 1275 mg/g for methylene blue, and 909 mg/g for methyl orange). Additionally, a practical form of the silica-supported MOF, UiO-66-NH2@SiO2, constructed in under 2 h reaction time, is described, generating a true platform microporous sorbent for practical use in demanding applications.

Electrically Conductive, Monolithic Metal-Organic Framework-Graphene (MOF@G) Composite Coatings.

We present a novel approach to produce a composite of the HKUST-1 metal-organic framework (MOF) and graphene, which is suited for the fabrication of monolithic coatings of solid substrates. In order to avoid the degradation of graphene electrical properties resulting from chemical functionalization (e.g., oxidation yielding graphene oxide, GO), commercial, nonmodified graphene was utilized. The one-pot synthesis of the moldable composite material allows for a controllable loading of graphene and the tuning of porosity. Potentially, this facile synthesis can be transferred to other MOF systems. The monolithic coatings reported here exhibit high surface areas (1156-1078 m2/g). The electrical conductivity was high (a range of 7.6 × 10-6 S m-1to 6.4 × 10-1 S m-1) and was found to be proportional to the graphene content. The ability to readily attain different forms and shapes of the conductive, microporous composites indicates that the MOF@G system can provide a compelling approach to access various applications of MOFs, specifically in electrochemical catalysis, supercapacitors, and sensors.

A Ni-loaded, metal-organic framework-graphene composite as a precursor for in situ electrochemical deposition of a highly active and durable water oxidation nanocatalyst.

A novel approach to construct a highly active and durable Ni(OH)2 nanoparticle/graphene hybrid electrocatalyst for the oxygen-evolution reaction (OER) is reported. This approach utilized the Ni-loaded, graphene-supported, Zr-carboxylate metal-organic framework (UiO-66-NH2-Ni@G) as a sacrificial pre-catalyst to engender the true catalyst in an electrochemical surface restructuring process. This has resulted in an exceptionally active (η10 = 0.38 V vs. RHE) and highly durable OER catalyst, and can potentially be employed as a viable facile alternative to the commonly utilized pyrolysis of MOFs, to access heterogenous catalysts for demanding electrochemically-promoted reactions.

Metallic Nanoparticles Assimilation within Metal-Organic Framework Monolith.

A facile and versatile method is reported for the inclusion of gold nanoparticles (AuNPs) within a monolithic metal-organic framework (HKUST-1 MOF). Simple addition of stabilized colloidal AuNPs solution to the reaction mixture at the early stages of the formation of the MOF monolith resulted in quantitative uptake of the AuNPs within the MOF matrix. Several characterization techniques including solution and solid UV-vis spectroscopy, TEM, and XRD indicated the successful immobilization of the AuNPs. Controllable loading of AuNPs was also demonstrated, where gas sorption measurements indicated the maintained microporosity of the AuNPs-containing monoliths. This methodology has wide potential applications in demanding technologies, including sensing and catalysis, where monolithic materials of controllable physicochemical properties can be readily accessible through pore size and guest selectivity of the host MOF matrix controlling access of guest molecules to immobilized AuNPs.

Imide-Based Polymers of Intrinsic Microporosity: Probing the Microstructure in Relation to CO2 Sorption Characteristics.

A range of microporous, imide-based polymers were newly synthesized using two-step poly-condensation reactions of bis(carboxylic anhydride) and various aromatic diamines for CO2 gas capture and storage applications. In this report, we attempted to assess the relative significance of molecular structural aspects through the manipulation of the conformational characteristics of the building blocks of the polymeric structures, the spiro-containing acid anhydride and the aromatic amines, to induce greater intrinsic microporosity and higher surface areas for the resulting solids. Results obtained from this study were thus used to outline a working relationship between the structural diversity of the constructed porous solids and their performance as CO2 sorbents.

Combined QM/MM and Monte Carlo study for redox leveling in Mn and Fe superoxide dismutase.

Superoxide dismutases (SOD) are vital enzymes for disproportionation of superoxide molecules in mammals. Despite the high similarity between the Mn-SOD and Fe-SOD, they are inactive if the metals in the active sites are exchanged. Here, we use DFT, QM/MM and Monte Carlo sampling to optimize the crystal structure and to calculate the mid-point potential for the native and substituted Mn/Fe-SOD. The optimized DFT and QM/MM structures of the Mn-SOD show a major conformational change for the conserved TYR34 compared to the X-ray structure. These changes reduce the distance between TYR34 and Mn ion to 2.59 Å, which yields a lower reduction potential for the Mn. On contrary, there is no significant difference between optimized and crystal structures in the Fe-SOD. The calculated E m values starting from the DFT structures of the active sites show similar pattern, in good agreement with those observed experimentally. However, the calculated E m values starting with the QM/MM structures that include the whole protein are significantly higher due to the desolvation penalty. In addition, the pK a values for the water ligand in the reduced state Mn(II) and Fe(II) were calculated. The water pK a in Mn-SOD is higher than that in Fe-SOD by 3.5 pH units, which is similar to the shift measured experimentally. Finally, we investigated the role of HIS30 and the effect of its protonation state on the E m values.

Controlling the Uptake and Regulating the Release of Nitric Oxide in Microporous Solids.

Representative compounds from three classes of microporous solids, namely, metal-organic frameworks (MOFs), hybrid ultra-microporous materials (HUMs), and porous-organic polymers (POPs), were investigated for their nitric oxide gas uptake and release behavior. Low-pressure sorption studies indicated strong chemisorption of NO on the free amine groups decorating the MOF UiO-66-NH2 when compared to its non-amine-functionalized parent. The HUMs demonstrated reversible physisorption within the low-pressure regime, but interestingly in one case there was evidence for chemisorption following pressurization with NO at 10 bar. Significant release of chemisorbed NO from the UiO-66-NH2 and one of the HUMs was triggered by addition of acid to the medium, a pH change from 7.4 to 5.4 being sufficient to trigger NO release. An imidazole-based POP exhibited chemisorption of NO at high pressure wherein the ring basicity facilitated both NO uptake and spontaneous release upon contact with the aqueous release medium.