Tetrameric self-assembling of water-lean solvents enables carbamate anhydride-based CO2 capture chemistry.

Carbon capture, utilization and storage is a key yet cost-intensive technology for the fight against climate change. Single-component water-lean solvents have emerged as promising materials for post-combustion CO2 capture, but little is known regarding their mechanism of action. Here we present a combined experimental and modelling study of single-component water-lean solvents, and we find that CO2 capture is accompanied by the self-assembly of reverse-micelle-like tetrameric clusters in solution. This spontaneous aggregation leads to stepwise cooperative capture phenomena with highly contrasting mechanistic and thermodynamic features. The emergence of well-defined supramolecular architectures displaying a hydrogen-bonded internal core, reminiscent of enzymatic active sites, enables the formation of CO2-containing molecular species such as carbamic acid, carbamic anhydride and alkoxy carbamic anhydrides. This system extends the scope of adducts and mechanisms observed during carbon capture. It opens the way to materials with a higher CO2 storage capacity and provides a means for carbamates to potentially act as initiators for future oligomerization or polymerization of CO2.

Enhancing CO2 Transport Across a PEEK-Ionene Membrane and Water-Lean Solvent Interface.

Efficient direct air capture (DAC) of CO2 will require strategies to deal with the relatively low concentration in the atmosphere. One such strategy is to employ the combination of a CO2 -selective membrane coupled with a CO2 capture solvent acting as a draw solution. Here, the interactions between a leading water-lean carbon-capture solvent, a polyether ether ketone (PEEK)-ionene membrane, CO2 , and combinations were probed using advanced NMR techniques coupled with advanced simulations. We identify the speciation and dynamics of the solvent, membrane, and CO2 , presenting spectroscopic evidence of CO2 diffusion through benzylic regions within the PEEK-ionene membrane, not spaces in the ionic lattice as expected. Our results demonstrate that water-lean capture solvents provide a thermodynamic and kinetic funnel to draw CO2 from the air through the membrane and into the bulk solvent, thus enhancing the performance of the membrane. The reaction between the carbon-capture solvent and CO2 produces carbamic acid, disrupting interactions between the imidazolium (Im+ ) cations and the bistriflimide anions within the PEEK-ionene membrane, thereby creating structural changes through which CO2 can diffuse more readily. Consequently, this restructuring results in CO2 diffusion at the interface that is faster than CO2 diffusion in the bulk carbon-capture solvent.

Dynamic Evolution of Palladium Single Atoms on Anatase Titania Support Determines the Reverse Water-Gas Shift Activity.

Research interest in single-atom catalysts (SACs) has been continuously increasing. However, the lack of understanding of the dynamic behaviors of SACs during applications hinders catalyst development and mechanistic understanding. Herein, we report on the evolution of active sites over Pd/TiO2-anatase SAC (Pd1/TiO2) in the reverse water-gas shift (rWGS) reaction. Combining kinetics, in situ characterization, and theory, we show that at T ≥ 350 °C, the reduction of TiO2 by H2 alters the coordination environment of Pd, creating Pd sites with partially cleaved Pd-O interfacial bonds and a unique electronic structure that exhibit high intrinsic rWGS activity through the carboxyl pathway. The activation by H2 is accompanied by the partial sintering of single Pd atoms (Pd1) into disordered, flat, ∼1 nm diameter clusters (Pdn). The highly active Pd sites in the new coordination environment under H2 are eliminated by oxidation, which, when performed at a high temperature, also redisperses Pdn and facilitates the reduction of TiO2. In contrast, Pd1 sinters into crystalline, ∼5 nm particles (PdNP) during CO treatment, deactivating Pd1/TiO2. During the rWGS reaction, the two Pd evolution pathways coexist. The activation by H2 dominates, leading to the increasing rate with time-on-stream, and steady-state Pd active sites similar to the ones formed under H2. This work demonstrates how the coordination environment and nuclearity of metal sites on a SAC evolve during catalysis and pretreatments and how their activity is modulated by these behaviors. These insights on SAC dynamics and the structure-function relationship are valuable to mechanistic understanding and catalyst design.

The Role of Surface Hydroxyls in the Mobility of Carboxylates on Surfaces: Dynamics of Acetate on Anatase TiO2(101).

The dynamics of reactive intermediates are important in catalysis for understanding transient species, which can drive reactivity and the transport of species to reaction centers. In particular, the interplay between surface-bound carboxylic acids and carboxylates is important for numerous chemical transformations, including CO2 hydrogenation and ketonization. Here, we investigate the dynamics of acetic acid on anatase TiO2(101) using scanning tunneling microscopy experiments and density functional theory calculations. We demonstrate the concomitant diffusion of bidentate acetate and a bridging hydroxyl and provide evidence for the transient formation of molecular monodentate acetic acid. The diffusion rate is strongly dependent on the position of hydroxyl and adjacent acetate(s). A facile three-step diffusion process is proposed consisting of acetate and hydroxyl recombination, acetic acid rotation, and acetic acid dissociation. This study clearly demonstrates that the dynamics of bidentate acetate could be important in forming monodentate species, which are proposed to drive selective ketonization.

Advanced Theory and Simulation to Guide the Development of CO2 Capture Solvents.

Increasing atmospheric concentrations of greenhouse gases due to industrial activity have led to concerning levels of global warming. Reducing carbon dioxide (CO2) emissions, one of the main contributors to the greenhouse effect, is key to mitigating further warming and its negative effects on the planet. CO2 capture solvent systems are currently the only available technology deployable at scales commensurate with industrial processes. Nonetheless, designing these solvents for a given application is a daunting task requiring the optimization of both thermodynamic and transport properties. Here, we discuss the use of atomic scale modeling for computing reaction energetics and transport properties of these chemically complex solvents. Theoretical studies have shown that in many cases, one is dealing with a rich ensemble of chemical species in a coupled equilibrium that is often difficult to characterize and quantify by experiment alone. As a result, solvent design is a balancing act between multiple parameters which have optimal zones of effectiveness depending on the operating conditions of the application. Simulation of reaction mechanisms has shown that CO2 binding and proton transfer reactions create chemical equilibrium between multiple species and that the agglomeration of resulting ions and zwitterions can have profound effects on bulk solvent properties such as viscosity. This is balanced against the solvent systems needing to perform different functions (e.g., CO2 uptake and release) depending on the thermodynamic conditions (e.g., temperature and pressure swings). The latter constraint imposes a "Goldilocks" range of effective parameters, such as binding enthalpy and pK a, which need to be tuned at the molecular level. The resulting picture is that solvent development requires an integrated approach where theory and simulation can provide the necessary ingredients to balance competing factors.

Amphilic Water-Lean Carbon Capture Solvent Wetting Behavior through Decomposition by Stainless-Steel Interfaces.

A combined experimental and theoretical study has been carried out on the wetting and reactivity of water-lean carbon capture solvents on the surface of common column packing materials. Paradoxically, these solvents are found to be equally able to wet hydrophobic and hydrophilic surfaces. The solvents are amphiphilic and can adapt to any interfacial environment, owing to their inherent heterogeneous (nonionic/ionic) molecular structure. Ab initio molecular dynamics indicates that these structures enable the formation of a strong adlayer on the surface of hydrophilic surfaces like oxidized steel which promotes solvent decomposition akin to hydrolysis from surface oxides and hydroxides. This decomposition passivates the surface, making it effectively hydrophobic, and the decomposed solvent promotes leaching of the iron into the bulk fluid. This study links the wetting behavior to the observed corrosion of the steels by decomposition of solvent at steel interfaces. The overall affect is strongly dependent on the chemical composition of the solvent in that amines are stable, whereas imines and alcohols are not. Moreover, plastic packing shows little to no solvent degradation, but an equal degree of wetting.

The role of sub-surface hydrogen on CO2 reduction and dynamics on Ni(110): An ab initio molecular dynamics study.

The catalytic reduction in carbon dioxide is a crucial step in many chemical industrial reactions, such as methanol synthesis, the reverse water-gas shift reaction, and formic acid synthesis. Here, we investigate the role of bulk hydrogen, where hydrogen atoms are found deep inside a metal surface as opposed to subsurface ones, upon CO2 reduction over a Ni(110) surface using density functional theory and ab initio molecular dynamics simulations. While it has previously been shown that subsurface hydrogen stabilizes CO2 and can aid in overcoming reaction barriers, the role of bulk hydrogen is less studied and thus unknown with regard to CO2 reduction. We find that the presence of bulk hydrogen can significantly alter the electronic structure of the Ni(110) surface, particularly the work function and d-band center, such that CO2 adsorbs more strongly to the surface and is more easily reduced. Our results show an enhanced CO2 dissociation in the presence of bulk hydrogen, shedding light on a hitherto underappreciated mechanistic pathway for CO2 reduction on metal surfaces.

Heterogeneous CPU+GPU-Enabled Simulations for DFTB Molecular Dynamics of Large Chemical and Biological Systems.

We introduce a new heterogeneous CPU+GPU-enhanced DFTB approach for the routine and efficient simulation of large chemical and biological systems. Compared to homogeneous computing with conventional CPUs, heterogeneous computing approaches exhibit substantial performance with only a modest increase in power consumption, both of which are essential to upcoming exascale computing initiatives. We show that DFTB-based molecular dynamics is a natural candidate for heterogeneous computing, since the computational bottleneck in these simulations is the diagonalization of the Hamiltonian matrix, which is performed several times during a single molecular dynamics trajectory. To thoroughly test and understand the performance of our heterogeneous CPU+GPU approach, we examine a variety of algorithmic implementations, benchmarks of different hardware configurations, and applications of this methodology on several large chemical and biological systems. Finally, to demonstrate the capability of our implementation, we conclude with a large-scale DFTB MD simulation of explicitly solvated HIV protease (3974 atoms total) as a proof-of-concept example of an extremely large/complex system which, to the best of our knowledge, is the first time that an entire explicitly solvated protein has been treated at a quantum-based MD level of detail.

A Highly Stretchy, Transparent Elastomer with the Capability to Automatically Self-Heal Underwater.

Polymer materials that are able to self-heal in humid conditions or even in water are highly desirable for their industrial applications. However, the development of underwater self-healing polymer materials is very challenging since water molecules can readily disturb traditional noncovalent bonds, such as saturate the hydrogen bonds, coordinate with the metal cation, as well as solvate the ions. Here, a new type of dipole-dipole interactions is employed as the driving force, combining with highly polar and hydrophobic fluorinated polymers, to successfully demonstrate an underwater self-healing elastomer. The polymer materials are transparent and stretchable. They can remain stable underwater for months without significant decay of mechanical properties. Upon mechanical damage, the material is able to self-heal automatically in air, underwater, and under very harsh aqueous conditions (including seawater, highly acidic media, and highly basic media, etc.).

A Transparent, Self-Healing, Highly Stretchable Ionic Conductor.

Self-healing materials can repair damage caused by mechanical wear, thereby extending lifetime of devices. A transparent, self-healing, highly stretchable ionic conductor is presented that autonomously heals after experiencing severe mechanical damage. The design of this self-healing polymer uses ion-dipole interactions as the dynamic motif. The unique properties of this material when used to electrically activate transparent artificial muscles are demonstrated.

Inconsistencies in the Electronic Properties of Phosphorene Nanotubes: New Insights from Large-Scale DFT Calculations.

Contrary to recent reports, we show that the electronic properties of phosphorene nanotubes are surprisingly rich and much more complex than previously assumed. We find that all phosphorene nanotubes exhibit an intricate direct-to-indirect band gap transition as the nanotube diameter decreases, a unique property not identified in any prior studies (which claimed either direct or indirect band gaps only) that we uncover with large-scale DFT calculations. We address these previous inconsistencies by detailed analyses of orbital interactions, which reveal that the strain associated with decreasing the nanotube diameter causes a transition from a direct to an indirect band gap for all of the phosphorene nanotubes. We show that our findings are completely general, and extensive calculations across several exchange-correlation functionals verify our conclusions. Most importantly, our results and analyses resolve a long-standing question on the electronic properties of phosphorus nanotubes and bring closure to previously conflicting findings in these unique nanostructures.

Unusual Bandgap Oscillations in Template-Directed π-Conjugated Porphyrin Nanotubes.

Using large-scale DFT calculations (up to 1476 atoms and 18 432 orbitals), we present the first detailed analysis on the unusual electronic properties of recently synthesized porphyrin nanotubes. We surprisingly observe extremely large oscillations in the bandgap of these nanostructures as a function of size, in contradiction to typical quantum confinement effects (i.e., the bandgap increases with size in several of these nanotubes). In particular, we find that these intriguing electronic oscillations arise from a size-dependent alternation of aromatic/nonaromatic characteristics in these porphyrin nanotubes. Our analyses of band structures and orbital diagrams indicate that the electronic transitions in these nanostructures are direct-bandgap, optically active "bright" states that can be readily observed in photoelectron spectroscopic experiments. Most importantly due to their unusual bandgap oscillations, we find that both type I and type II donor-acceptor p-n heterojunctions are possible in these template-directed, "bottom-up synthesized" porphyrin nanotubes-a unique property that is not present in conventional carbon nanotubes.