Prevalence of Obesity and Dental Caries in High School Adolescents during the First Decade of Saudi Vision 2030: A Cross-Sectional Study.

Saudi Vision 2030 was launched in 2016. Obesity and dental caries are both highly prevalent in Saudi adolescents and have been targeted by the Vision's health initiatives. The aim is to assess their prevalence in adolescents during the first decade since the launch of the Vision. This cross-sectional study was conducted in Jeddah, Saudi Arabia using a stratified sample of 571 high school students, with an average age of 16.7 (0.6). Their height and weight were measured, and their body mass index (BMI) was calculated. The decayed, missed, and filled scores (DMFTs) were recorded after an oral examination. Non-parametric tests were used to assess the associations of DMFT with BMI, sex, and school type; and its predictors were assessed. One-third of males were overweight/obese compared with 22% of females. Males exhibited higher DMFTs than females. DMFTs were higher among public school students than among their private school counterparts. No significant association was observed between DMFT and BMI. Sex and school type were significant predictors of DMFT. The prevalence of obesity has slowly decreased in adolescents, but the prevalence of dental caries has not. There was no significant relationship between these conditions. Saudi Vision 2030's current preventive/educational initiatives may be more effective in combating obesity than dental caries.

Maternal Exposure to Stress During Covid-19 and Non-Syndromic Orofacial Clefts: A Cohort Retrospective Study.

OBJECTIVE: The coronavirus (COVID-19) pandemic presents an opportunity to study stress's effect on the development of non-syndromic orofacial clefts (NSOFCs). This study was aimed at assessing maternal stress exposure during the pregestational to first trimester pregnancy periods and the development of NSOFCs during a year of the COVID-19 pandemic. DESIGN: Cohort study of infants with NSOFCs and controls matched based on recruitment site and age. SETTING: Government hospitals in Saudi Arabia between November 2020 and November 2021. MAIN OUTCOME MEASURES: Data collection included NSOFC clinical examination and maternal stress exposure assessment using the Modified Life Events Questionnaire, the Fear of COVID-19 Scale, and a focus on the lack of pregnancy planning and a threatened miscarriage. RESULTS: Of the 557 infants recruited, 191 had NSOFCs. Logistic regression analysis with adjusted odds ratios (AORs) that removed the effects of confounders showed that any of the seven stressful life events (AOR:3.78, P < .001) and the family histories of relatives with NSOFCs (AOR:9.73, P < .001) increased the AOR for NSOFC development. In contrast, maternal folic acid (AOR:0.56, P.010), threatened miscarriage (AOR:0.17, P = .001), fear of COVID-19 (AOR:0.83, P = .038), and suspected COVID-19 infection (AOR:0.43, P = .008) decreased the AOR for NSOFC development. CONCLUSION: Along with an established risk associated with family history of birth defects, stressful life events may be a risk factor for NSOFC development. Beyond folic acid's known benefit, it may be that higher maternal health concerns contribute to increased protective health behaviors during pregnancy. Ongoing research is needed to specify the maternal risk factors for NSOFC.

Incidence of non-syndromic orofacial cleft during the COVID-19 pandemic in Saudi Arabia.

OBJECTIVES: This is the first national study to investigate the incidence of non-syndromic oro-facial clefts (NSOFC) and Pierre-Robin-Sequence in Saudi Arabia over the Covid-19 pandemic period. METHODS: All maternity hospitals (30-hospitals) in the major regions and cities of Saudi from November 2020-to-2021 were included in the study. Patients were evaluated for cleft phenotype using the LASHAL-classification system. The incidence of NSOFC in Saudi Arabia was calculated by comparing the number of NSOFCs cases born out of all live births during the study period at the included hospitals. Clinical examination was performed and information was gathered using a validated data collection form. RESULTS: In one year, 140,380 live-infants were born at the selected hospitals. Of these, 177 were diagnosed with NSOFC giving an incidence of 1.26/1,000 live-births in Saudi Arabia and the highest incidence in Medina city (2.46/1000 live-births). The incidence of cleft lip-and-palate (0.67/1000 live-births) was higher than that of cleft-palate (0.37/1000 live-births) and cleft-lip (0.22/1000 live-births). Pierre-Robin Sequence incidence was (0.04/1000 live-births). There were 21(12.1) or 23(13.2%) of NSOFC's mothers exposed or vaccinated with Covid-19, respectively. CONCLUSION: The national incidence of NSOFC in Saudi Arabia was 1.26/1000 live births with variation between phenotypes and regions in the country. In addition, to reporting Covid-19 infection prevalence and vaccine exposure among NSOFC's mothers, this study represents the first of its type to evaluate NSOFC prevalence in Saudi Arabia on a national level.

Influence of ZrO2 Nanoparticle Addition on the Optical Properties of Denture Base Materials Fabricated Using Additive Technologies.

This study investigated the translucency of 3D-printed denture base resins modified with zirconium dioxide nanoparticles (ZrO2NPs) under thermal cycling. A total of 110 specimens were fabricated and divided into 3 groups according to the materials, i.e., heat-polymerized resin, and 3D-printed resins (NextDent, and ASIGA). The 3D-printed resins were modified with 0, 0.5, 1, 3, and 5 wt.% of ZrO2NPs. All the specimens were subjected to 5000 thermal cycles. The translucency was measured using a spectrophotometer. The results showed that the heat-polymerized resin had considerably higher translucency than the 3D-printed resins. Compared to the unmodified group, the translucency decreased significantly after adding 5% ZrO2NPs to NextDent and 3% ZrO2NPs to ASIGA resins. The highest translucency was achieved for NextDent by adding 0.5% ZrO2NPs and for ASIGA without any ZrO2NPs. It was found that the average concentration level in ASIGA was significantly higher than that in NextDent. These findings revealed that 3D-printed resins have lower translucency than heat-polymerized acrylic resin, and adding ZrO2NPs at low concentrations did not affect the translucency of the 3D-printed resins. Therefore, in terms of translucency, 3D-printed nanocomposite denture base resins could be considered for clinical applications when ZrO2NPs are added at low concentrations.

3D-Printed Nanocomposite Denture-Base Resins: Effect of ZrO2 Nanoparticles on the Mechanical and Surface Properties In Vitro.

Due to the low mechanical performances of 3D-printed denture base resins, ZrO2 nanoparticles (ZrO2NPs) were incorporated into different 3D-printed resins and their effects on the flexure strength, elastic modulus, impact strength, hardness, and surface roughness were evaluated. A total of 286 specimens were fabricated in dimensions per respective test and divided according to materials into three groups: heat-polymerized as a control group and two 3D-printed resins (NextDent and ASIGA) which were modified with 0.5 wt.%, 1 wt.%, 3 wt.%, and 5 wt.% ZrO2NPs. The flexure strength and elastic modulus, impact strength, hardness, and surface roughness (µm) were measured using the three-point bending test, Charpy's impact test, Vickers hardness test, and a profilometer, respectively. The data were analyzed by ANOVA and Tukey's post hoc test (α = 0.05). The results showed that, in comparison to heat-polymerized resin, the unmodified 3D-printed resins showed a significant decrease in all tested properties (p < 0.001) except surface roughness (p = 0.11). In between 3D-printed resins, the addition of ZrO2NPs to 3D-printed resins showed a significant increase in flexure strength, impact strength, and hardness (p < 0.05) while showing no significant differences in surface roughness and elastic modulus (p > 0.05). Our study demonstrated that the unmodified 3D-printed resins showed inferior mechanical behavior when compared with heat-polymerized acrylic resin while the addition of ZrO2NPs improved the properties of 3D-printed resins. Therefore, the introduced 3D-printable nanocomposite denture-base resins are suitable for clinical use.

Oral manifestations in young adults infected with COVID-19 and impact of smoking: a multi-country cross-sectional study.

Background: Oral manifestations and lesions could adversely impact the quality of people's lives. COVID-19 infection may interact with smoking and the impact on oral manifestations is yet to be discovered. Objectives: The aim of this study was to assess the self-reported presence of oral lesions by COVID-19-infected young adults and the differences in the association between oral lesions and COVID-19 infection in smokers and non-smokers. Methods: This cross-sectional multi-country study recruited 18-to-23-year-old adults. A validated questionnaire was used to collect data on COVID-19-infection status, smoking and the presence of oral lesions (dry mouth, change in taste, and others) using an online platform. Multi-level logistic regression was used to assess the associations between the oral lesions and COVID-19 infection; the modifying effect of smoking on the associations. Results: Data was available from 5,342 respondents from 43 countries. Of these, 8.1% reported COVID-19-infection, 42.7% had oral manifestations and 12.3% were smokers. A significantly greater percentage of participants with COVID-19-infection reported dry mouth and change in taste than non-infected participants. Dry mouth (AOR=, 9=xxx) and changed taste (AOR=, 9=xxx) were associated with COVID-19- infection. The association between COVID-19-infection and dry mouth was stronger among smokers than non-smokers (AOR = 1.26 and 1.03, p = 0.09) while the association with change in taste was stronger among non-smokers (AOR = 1.22 and 1.13, p = 0.86). Conclusion: Dry mouth and changed taste may be used as an indicator for COVID-19 infection in low COVID-19-testing environments. Smoking may modify the association between some oral lesions and COVID-19-infection.