Recognition of anion-water clusters by peptide-based supramolecular capsules.

The biological and technological importance of anion-mediated processes has made the development of improved methods for the selective recognition of anions one of the most relevant research topics today. The hydration sphere of anions plays an important role in the functions performed by anions by forming a variety of cluster complexes. Here we describe a supramolecular capsule that recognizes hydrated anion clusters. These clusters are most likely composed of three ions that form hydrated C3 symmetry complexes that are entrapped within the supramolecular capsule of the same symmetry. The capsule is made of self-assembled α,γ-cyclic peptide containing amino acid with by five-membered rings and equipped with a tris(triazolylethyl)amine cap. To recognise the hydrated anion clusters, the hexapeptide capsule must disassemble to entrap them between its two subunits.

3D-Printing of Capsule Devices as Compartmentalization Tools for Supported Reagents in the Search of Antiproliferative Isatins.

The application of high throughput synthesis methodologies in the generation of active pharmaceutical ingredients (APIs) currently requires the use of automated and easily scalable systems, easy dispensing of supported reagents in solution phase organic synthesis (SPOS), and elimination of purification and extraction steps. The recyclability and recoverability of supported reagents and/or catalysts in a rapid and individualized manner is a challenge in the pharmaceutical industry. This objective can be achieved through a suitable compartmentalization of these pulverulent reagents in suitable devices for it. This work deals with the use of customized polypropylene permeable-capsule devices manufactured by 3D printing, using the fused deposition modeling (FDM) technique, adaptable to any type of flask or reactor. The capsules fabricated in this work were easily loaded "in one step" with polymeric reagents for use as scavengers of isocyanides in the work-up process of Ugi multicomponent reactions or as compartmentalized and reusable catalysts in copper-catalyzed cycloadditions (CuAAC) or Heck palladium catalyzed cross-coupling reactions (PCCCRs). The reaction products are different series of diversely substituted isatins, which were tested in cancerous cervical HeLa and murine 3T3 Balb fibroblast cells, obtaining potent antiproliferative activity. This work demonstrates the applicability of 3D printing in chemical processes to obtain anticancer APIs.

Macromolecular assembly and membrane activity of antimicrobial D,L-α-Cyclic peptides.

Antimicrobial peptides are viewed as a promising alternative to conventional antibiotics, as their activity through membrane targeting makes them less prone to resistance development. Among them, antimicrobial D,L-α-cyclic peptides (CPs) have been proposed as an alternative, specially due to their cyclic nature and to the presence of D-α-amino acids that increases their resistance to proteases. In present work, second generation D,L-α-cyclic peptides with proven antimicrobial activity are shown to form complex macromolecular assemblies in the presence of membranes. We addressed the CPs:membrane interactions through a combination of experimental techniques (DSC and ATR-FTIR) with coarse-grained molecular dynamics (CG-MD) simulations, aiming at understanding their interactions, macromolecular assemblies and eventually unveil their mechanism of action. DSC shows that the interaction depends heavily on the negatively charge content of the membrane and on lipid/peptide ratio, suggesting different mechanisms for the different peptides and lipid systems. CG-MD proved that CPs can self-assemble at the lipid surface as nanotubes or micellar aggregates, depending on the peptide, in agreement with ATR-FTIR results. Finally, our results shed light into possible mechanisms of action of the peptides with pending hydrocarbon tail, namely membrane extensive segregation and/or membrane disintegration through the formation of disk-like lipid/peptide aggregates.

Transmembrane Self-Assembled Cyclic Peptide Nanotubes Based on α-Residues and Cyclic δ-Amino Acids: A Computational Study.

Self-assembling cyclic peptide nanotubes have been shown to function as synthetic, integral transmembrane channels. The combination of natural and nonnatural aminoacids in the sequence of cyclic peptides enables the control not only of their outer surface but also of the inner cavity behavior and properties, affecting, for instance, their permeability to different molecules including water and ions. Here, a thorough computational study on a new class of self-assembling peptide motifs, in which δ-aminocycloalkanecarboxylic acids are alternated with natural α-amino acids, is presented. The presence of synthetic δ-residues creates hydrophobic regions in these α,δ-SCPNs, which makes them especially attractive for their potential implementation in the design of new drug or diagnostic agent carrier systems. Using molecular dynamics simulations, the behavior of water molecules, different ions (Li+, Na+, K+, Cs+, and Ca2+), and their correspondent counter Cl- anions is extensively investigated in the nanoconfined environment. The structure and dynamics are mutually combined in a diving immersion inside these transmembrane channels to discover a fascinating submarine nanoworld where star-shaped water channels guide the passage of cations and anions therethrough.

Molecular Plumbing to Bend Self-Assembling Peptide Nanotubes.

Light-induced molecular piping of cyclic peptide nanotubes to form bent tubular structures is described. The process is based on the [4+4] photocycloaddition of anthracene moieties, whose structural changes derived from the interdigitated flat disposition of precursors to the corresponding cycloadduct moieties, induced the geometrical modifications in nanotubes packing that provokes their curvature. For this purpose, we designed a new class of cyclic peptide nanotubes formed by ß- and α-amino acids. The presence of the former predisposes the peptide to stack in a parallel fashion with the ß-residues aligned along the nanotube and the homogeneous distribution of anthracene pendants.

Double Orthogonal Click Reactions for the Development of Antimicrobial Peptide Nanotubes.

A new class of amphipathic cyclic peptides, which assemble in bacteria membranes to form polymeric supramolecular nanotubes giving them antimicrobial properties, is described. The method is based on the use of two orthogonal clickable transformations to incorporate different hydrophobic or hydrophilic moieties in a simple, regioselective, and divergent manner. The resulting cationic amphipathic cyclic peptides described in this article exhibit strong antimicrobial properties with a broad therapeutic window. Our studies suggest that the active form is the nanotube resulted from the parallel stacking of the cyclic peptide precursors. Several techniques, CD, FTIR, fluorescence, and STEM, among others, confirm the nanotube formation.

Membrane targeting antimicrobial cyclic peptide nanotubes - an experimental and computational study.

The search of new antibiotics, particularly with new mechanisms of action, is nowadays a very important public health issue, due to the worldwide increase of resistant pathogens. Within this effort, much research has been done on antimicrobial peptides, because having the membrane as a target, they represent a new antibiotic paradigm. Among these, cyclic peptides (CPs) made of sequences of D- and L-amino acids have emerged as a new class of potential antimicrobial peptides, due to their expected higher resistance to protease degradation. These CPs are planar structures that can form Self-assembled Cyclic Peptide Nanotubes (SCPNs), in particular in the presence of lipid membranes. Aiming at understanding their mechanism of action, we used biophysical experimental techniques (DSC and ATR-FTIR) together with Coarse-grained molecular dynamics (CG-MD) simulations, to characterize the interaction of these CPs with model membranes of different electrostatic charges' contents. DSC results revealed that the CPs show a strong interaction with negatively charged membranes, with differences in the strength of interactions depending on peptide and on membrane charge content, at odds with no or mild interactions with zwitterionic membranes. ATR-FTIR suggested that the peptides self-assemble at the membrane surface, adopting mainly a ß-structure. The experiments with polarized light showed that in most cases they lie parallel to the membrane surface, but other forms and orientations are also apparent, depending on peptide structure and lipid:peptide ratio. The nanotube formation and orientation, as well as the dependence on membrane charge were also confirmed by the CG-MD simulations. These provide detail on the position and interactions, in agreement with the experimental results. Based on the findings reported here, we could proceed to the design and synthesis of a second-generation CPs, based on CP2 (soluble peptide), with increased activity and reduced toxicity.

Parallel Versus Antiparallel ß-Sheet Structure in Cyclic Peptide Hybrids Containing γ- or δ-Cyclic Amino Acids.

Cyclic peptides with disc-shaped structures have emerged as potent building blocks for the preparation of new biomaterials in fields ranging from biological to material science. In this work, we analyze in depth the self-assembling properties of a new type of cyclic peptides based on the alternation of α-residues and cyclic δ-amino acids (α,δ-CPs). To examine the preferred stacking properties adopted by cyclic peptides bearing this type of amino acids, we carried out a synergistic in vitro/in silico approximation by using simple dimeric models and then extended to nanotubes. Although these new cyclic peptides (α,δ-CPs) can interact either in a parallel or antiparallel fashion, our results confirm that although the parallel ß-sheet is more stable, it can be switched to the antiparallel stacking by choosing residues that can establish favorable cross-strand interactions. Moreover, the subsequent comparison by using the same methodology but applied to α,γ-CPs models, up to the moment assumed as antiparallel-like d,l-α-CPs, led to unforeseen conclusions that put into question preliminary conjectures about these systems. Surprisingly, they tend to adopt a parallel ß-sheet directed by the skeleton interactions. These results imply a change of paradigm with respect to cyclic peptide designs that should be considered for dimers and nanotubes.

Novel synthesis of platinum complexes and their intracellular delivery to tumor cells by means of magnetic nanoparticles.

Platinum-based drugs are popular in clinics as chemotherapeutic agents to treat solid tumors. However, severe side effects such as nephro- and neurotoxicity impose strict dosage limitations that can lead to the development of drug resistance and tumor relapse. To overcome these issues Pt(iv) prodrugs and platinum delivery systems might represent the next generation of platinum-based drugs. In this study four novel Pt(ii) complexes (namely, PEG-Glu-Pt-EDA, PEG-Glu-Pt-DACH, PEG-Mal-Pt-EDA and PEG-Mal-Pt-DACH) were synthesized and a general strategy to covalently bind them to iron oxide nanoparticles was developed. The intracellular uptake and cell distribution studies of Pt-tethered magnetic nanoparticles on breast and ovarian cancer cell line models indicate that binding of the Pt complexes to the nanoparticles facilitates, for all the complexes, cellular internalization. Moreover, the magnetic nanoparticles (MNPs), as shown in a magnetofection experiment, enhance the uptake of MNP-Pt conjugates if a magnet is placed beneath the culture dish of tumor cells. As shown by a Pt release experiment, intranuclear platinum quantification and TEM analysis on cell sections, the presence of a pH-sensitive dicarboxylic group coordinating the Pt complex, triggers platinum dissociation from the NP surface. In addition, the triazole moiety facilitates endosomal swelling and the leakage of platinum from the endosomes with intranuclear localization of platinum release by the NPs. Finally, as assessed by MTT, caspase, calcein/ethidium bromide live/dead assays, among the four NP-Pt conjugates, the NP-Glu-Pt-EDA complex having a glutamate ring and ethylenediamine as a chelating amine group of the platinum showed higher cytotoxicity than the other three MNP-platinum conjugates.

Versatile symport transporters based on cyclic peptide dimers.

We present the synthesis and transmembrane transport properties of a new family of tris-pyridine-decorated cyclic peptides. These molecules are designed to self-assemble into dimeric shuttles in nonpolar media, which act as symport ionophores in which, apparently, the tris-pyridine scaffold complexes both cations and anions with high potency and efficacy.

Tight Xenon Confinement in a Crystalline Sandwich-like Hydrogen-Bonded Dimeric Capsule of a Cyclic Peptide.

A cyclic hexapeptide with three pyridyl moieties connected to its backbone forms a hydrogen-bonded dimer, which tightly encapsulates a single xenon atom, like a pearl in its shell. The dimer imprints its shape and symmetry to the captured xenon atom, as demonstrated by 129 Xe NMR spectroscopy, single-crystal X-ray diffraction, and computational studies. The dimers self-assemble hierarchically into tubular structures to form a porous supramolecular architecture, whose cavities are filled by small molecules and gases.

Multicatalysis Combining 3D-Printed Devices and Magnetic Nanoparticles in One-Pot Reactions: Steps Forward in Compartmentation and Recyclability of Catalysts.

A tricatalytic compartmentalized system that immobilizes metallic species to perform one-pot sequential functionalization is described: a three-dimensional (3D)-printed palladium monolith, ferritic copper(I) magnetic nanoparticles, and a 3D-printed polypropylene capsule-containing copper(II) loaded onto polystyrene-supported 1,5,7-triazabicyclo[4.4.0]dec-5-ene (PS-TBD) allowed the rapid synthesis of diverse substituted 1-([1,1'-biphenyl]-4-yl)-1H-1,2,3-triazoles. The procedure is based on the Chan-Lam azidation/copper alkyne-azide cycloaddition/Suzuki reaction strategy in the solution phase. This catalytic system enabled the efficient assembly of the final compounds in high yields without the need for special additives or intermediate isolation. The monolithic catalyst-containing immobilized palladium species was synthesized by surface chemical modification of a 3D-printed silica monolith using a soluble polyimide resin as a key reagent, thus creating an extremely robust composite. All three immobilized catalysts described here were easily recovered and reused in numerous cycles. This work exemplifies the role of 3D printing in the design and manufacture of devices for compartmented multicatalytic systems to carry out complex one-pot transformations.

New self-assembling peptide nanotubes of large diameter using δ-amino acids.

Here we show that 4-aminocyclohexanecarboxylic acid is a rigid stretcher building block for the preparation of cyclic peptides that self-assemble to form peptide nanotubes with large diameter and hydrophobic pores. The hydrophobic properties of the resulting nanotubes provided by the two methylene groups per δ-residue allow the encapsulation of C60 moieties forming a new type of bionanopeapod structure.

cis-Platinum Complex Encapsulated in Self-Assembling Cyclic Peptide Dimers.

A new cyclic peptide dimer that encapsulates cisplatin complexes in its internal cavity is described. The resulting complex showed cytotoxic activity at A2780 ovarian cancer cell lines independent of acquired platinum resistance.

Self-Assembling Molecular Capsules Based on α,γ-Cyclic Peptides.

A new capsule based on a ß-sheet self-assembling cyclic peptide with the ability to recognize and release several guests is described. The host structure is composed of two self-complementary α,γ-cyclic peptides bearing a Zn porphyrin cap that is used for the selective recognition of the guest. The two components are linked through two dynamic covalent bonds. The combination of binding forces, including hydrogen bonding, metal coordination, and dynamic hydrazone bonds, allows the reversible recognition of long bipyridine guests. The affinity for these ligands showed a strong dependence on the guest length. Delivery of the encapsulated ligand can be achieved by hydrolysis of hydrazones to disrupt the sandwich complex structure.

Self-assembling Venturi-like peptide nanotubes.

We describe the design and synthesis of self-assembling peptide nanotubes that have an internal filter area and whose length and internal diameters, at the entrance and in the constricted area, are precisely controlled.

Anion Recognition and Induced Self-Assembly of an α,γ-Cyclic Peptide To Form Spherical Clusters.

A cyclic octapeptide composed of hydroxy-functionalized γ-amino acids folds in a "V-shaped" conformation that allows the selective recognition of anions such as chloride, nitrate, and carbonate. The process involves the simultaneous self-assembly of six peptide subunits and the recognition of four anions to form a tetrahedral structure, in which the anions are located at the corners of the resulting structure. Each anion is coordinated to three different peptides. The structure was fully characterized by several techniques, including NMR spectroscopy and X-ray diffraction, and the material was able to facilitate the transmembrane transport of chloride ions.

Bioinspired Artificial Sodium and Potassium Ion Channels.

In Nature, all biological systems present a high level of compartmentalization in order to carry out a wide variety of functions in a very specific way. Hence, they need ways to be connected with the environment for communication, homeostasis equilibrium, nutrition, waste elimination, etc. The biological membranes carry out these functions; they consist of physical insulating barriers constituted mainly by phospholipids. These amphipathic molecules spontaneously aggregate in water to form bilayers in which the polar groups are exposed to the aqueous media while the non-polar chains self-organize by aggregating to each other to stay away from the aqueous media. The insulating properties of membranes are due to the formation of a hydrophobic bilayer covered at both sides by the hydrophilic phosphate groups. Thus, lipophilic molecules can permeate the membrane freely, while the small charged or very hydrophilic molecules require the assistance of other membrane components in order to overcome the energetic cost implied in crossing the non-polar region of the bilayer. Most of the large polar species (such as oligosaccharides, polypeptides or nucleic acids) cross into and out of the cell via endocytosis and exocytosis, respectively. Nature has created a series of systems (carriers and pores) in order to control the balance of small hydrophilic molecules and ions. The most important structures to achieve these goals are the ionophoric proteins that include the channel proteins, such as the sodium and potassium channels, and ionic transporters, including the sodium/potassium pumps or calcium/sodium exchangers among others. Inspired by these, scientists have created non-natural synthetic transporting structures to mimic the natural systems. The progress in the last years has been remarkable regarding the efficient transport of Na(+) and K(+) ions, despite the fact that the selectivity and the ON/OFF state of the non-natural systems remain a present and future challenge.

Self-assembling α,γ-cyclic peptides that generate cavities with tunable properties.

The design and synthesis of ß-sheet-based self-assembling cyclic peptides with tunable cavities is described. The incorporation of a γ-amino acid with a hydroxyl group at C2 allows the incorporation of different groups that modify the internal properties of the resulting dimeric ensemble. These dimers can entrap different guests depending on the properties of the group at C2. The guest defines the geometry of the resulting aggregate.

Membrane-targeted self-assembling cyclic peptide nanotubes.

Peptide nanotubes are novel supramolecular nanobiomaterials that have a tubular structure. The stacking of cyclic components is one of the most promising strategies amongst the methods described in recent years for the preparation of nanotubes. This strategy allows precise control of the nanotube surface properties and the dimensions of the tube diameter. In addition, the incorporation of 3- aminocycloalkanecarboxylic acid residues in the nanotube-forming peptides allows control of the internal properties of the supramolecular tube. The research aimed at the application of membrane-interacting self-assembled cyclic peptide nanotubes (SCPNs) is summarized in this review. The cyclic peptides are designed to interact with phospholipid bilayers to induce nanotube formation. The properties and orientation of the nanotube can be tuned by tailoring the peptide sequence. Hydrophobic peptides form transmembrane pores with a hydrophilic orifice, the nature of which has been exploited to transport ions and small molecules efficiently. These synthetic ion channels are selective for alkali metal ions (Na(+), K(+) or Cs(+)) over divalent cations (Ca(2+)) or anions (Cl(-)). Unfortunately, selectivity was not achieved within the series of alkali metal ions, for which ion transport rates followed the diffusion rates in water. Amphipathic peptides form nanotubes that lie parallel to the membrane. Interestingly, nanotube formation takes place preferentially on the surface of bacterial membranes, thus making these materials suitable for the development of new antimicrobial agents.