Copper-Nanoparticle-Decorated Hydrothermal Carbonaceous Carbon-Polydimethylsiloxane Nanocomposites: Unveiling Potential in Simultaneous Light-Driven Interfacial Water Evaporation and Power Generation.

This study introduces a hydrothermal synthesis method that uses glucose and Cu2+ ions to create a Cu-nanoparticle (NP)-decorated hydrothermal carbonaceous carbon hybrid material (Cu-HTCC). Glucose serves both as a reducing agent, efficiently transforming Cu2+ ions into elemental Cu nanostructures, and as a precursor for HTCC microstructures. An enhanced plasmon-induced electric field resulting from Cu NPs supported on microstructure matrices, coupled with a distinctive localized π-electronic configuration in the hybrid material, as confirmed by X-ray photoelectron spectroscopic analysis, lead to the heightened optical absorption in the visible-near-infrared range. Consequently, flexible nanocomposites of Cu-HTCC/PDMS and Cu-HTCC@PDMS (PDMS = polydimethylsiloxane) are designed as 2 and 3D structures, respectively, that exhibit broad-spectrum solar absorption. These composites promise efficient photo-assisted thermoelectric power generation and water evaporation, demonstrating commendable mechanical stability and flexibility. Notably, the Cu-HTCC@PDMS composite sponge simultaneously exhibits commendable efficiency in both water evaporation (1.47 kg m-2 h-1) and power generation (32.1 mV) under 1 sunlight illumination. These findings unveil new possibilities for innovative photothermal functional materials in diverse solar-driven applications.

Well-Balanced Ambipolar Charge Transport of Diketopyrrolepyrrole-Based Copolymers: Organic Field-Effect Transistors and High-Voltage Logic Applications.

A poly (3,6-bis(thiophen-2-yl)-2,5-bis(2-decyltetradecyl)-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione-co-(2,3-bis(phenyl)acrylonitrile)) (PDPADPP) copolymer, composed of diketopyrrolopyrrole (DPP) and a cyano (nitrile) group with a vinylene spacer linking two benzene rings, is synthesized via a palladium-catalyzed Suzuki coupling reaction. The electrical performance of PDPADPP in organic field-effect transistors (OFETs) and circuits is investigated. The OFETs based on PDPADPP exhibit typical ambipolar transport characteristics, with the as-cast OFETs demonstrating low field-effect hole and electron mobility values of 0.016 and 0.004 cm2  V-1  s-1 , respectively. However, after thermal annealing at 240 °C, the OFETs exhibit improved transport characteristics with highly balanced ambipolar transport, showing average hole and electron mobility values of 0.065 and 0.116 cm2  V-1  s-1 , respectively. To verify the application of the PDPADPP OFETs in high-voltage logic circuits, compact modeling using the industry-standard small-signal Berkeley short-channel IGFET model (BSIM) is performed, and the logic application characteristics are evaluated. The circuit simulation results demonstrate excellent logic application performance of the PDPADPP-based ambipolar transistor and illustrate that the device annealed at 240 °C exhibits ideal circuit characteristics.

Current developments of eco-friendly organic field-effect transistors: from molecular engineering of organic semiconductors to greener device processing.

Replacing environmentally damaging toxic halogenated/aromatic hydrocarbon organic solvents commonly used in solution-processed organic field-effect transistors with more sustainable green solvents has in recent years become a subject of various studies. In the current review, we summarize the properties of solvents used to process organic semiconductors and relate these properties to the toxicities of the solvents. And then, the research efforts to avoid using toxic organic solvents are reviewed, in particular the efforts involving molecular engineering of organic semiconductors achieved by introducing solubilizing side chains or substituents into the backbone and with synthetic strategies to asymmetrically deform the structure of the organic semiconductors and random copolymerization, as well as efforts involving the use of miniemulsion-based nanoparticles to process organic semiconductors.

Molecular Engineering of Printed Semiconducting Blends to Develop Organic Integrated Circuits: Crystallization, Charge Transport, and Device Application Analyses.

Solution-based printing has contributed to the facile deposition of various types of materials, including the building blocks of printed electronics. In particular, solution-processable organic semiconductors (OSCs) are regarded as one of the most fascinating candidates for the fabrication of printed electronics. Herein, we report electrohydrodynamic (EHD) jet-printed p- and n-type OSCs, namely 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-PEN) and 6,13-bis((triisopropylsilyl)ethynyl)-5,7,12,14-tetraazapentacene (TIPS-TAP), and their use as single-OSC layers and as OSC mixed p-n layers to fabricate solution-processed p-, n-, and ambipolar-type organic field-effect transistors (OFETs). Use of the dragging mode of EHD jet printing, a process driven under a low electrostatic field with a short nozzle-to-substrate distance, was found to provide favorable conditions for growth of TIPS-PEN and TIPS-TAP crystals. In this way, the similar molecular structures of TIPS-PEN and TIPS-TAP yielded a homogeneous solid solution and showed ambipolar transport properties in OFETs. Therefore, the combination of single- and mixed-OSC layers enabled the preparation of various charge-transported devices from unit to integrated devices (NOT, NAND, NOR, and multivalued logic). Therefore, this fabrication technology can be useful for assisting in the production of OSC layers for practical applications in the near future.

Advanced Organic Transistor-Based Sensors Utilizing a Solvatochromic Medium with Twisted Intramolecular Charge-Transfer Behavior and Its Application to Ammonia Gas Detection.

Here, we designed and developed an organic field-effect transistor (OFET)-based gas sensor by applying solvatochromic dye (Nile red, NR) with twisted intramolecular charge-transfer (TICT) behavior depending on the polarity of the surrounding molecules, as an auxiliary NR sensing medium (aNR-SM). As a polar molecule approaches, intra-charge transfers from the donor diethylamine group to the ketone group occur in the NR molecule, resulting in the twisting of the donor functional group and thereby increasing its dipole moment. Using this characteristic, NR was applied as an auxiliary sensing medium to the OFET for detecting ammonia (NH3), a representative toxic gas. The Top-NR case, where the aNR-SM covers only the top of the organic semiconductor layer, showed the best gas sensing performance, and its response and recovery rates were improved by 46 and 94%, respectively, compared to the pristine case. More importantly, a sensitivity of 0.87 ± 0.045 ppm-1 % was measured, having almost perfect linearity (0.999) over the range of measured NH3 concentrations, which is the result of solving the saturation problem in the sensing characteristics of the OFET-based gas sensor. Our result not only improved the sensing performance of the OFET-based sensor but also made an important advance in that the reliability of the sensing performance was easily secured by applying solvatochromic and TICT behaviors of an auxiliary sensing medium.

Electrohydrodynamic-Jet-Printed Cinnamate-Fluorinated Cross-Linked Polymeric Dielectrics for Flexible and Electrically Stable Operating Organic Thin-Film Transistors and Integrated Devices.

Herein, printable polymer series containing different portions of cinnamate and perfluorinated phenyl functionalities, namely, polyperfluorostyrene-co-poly(vinylbenzyl cinnamates) (PFS-co-PVBCi (x:y)) copolymers, were synthesized and applied as gate dielectrics for organic thin-film transistors (OTFTs). The polymeric dielectrics were successfully printed via electrostatic force-assisted dispensing mode of electrohydrodynamic jet printing. The dielectric characteristics of the printed polymers, such as surface energy, dielectric constant, leakage current, atomic depth profiles, and deposited semiconducting layer characteristics, were clearly identified. In particular, the difference in driving stability of OTFTs according to the type of polymer was analyzed in detail and a possible mechanism was proposed. Results suggested that PFS-co-PVBCi (3:7) led to optimized consequences, yielding an almost negligible Vth shift under continuous bias stress. Through this, we successfully implemented flexible OTFT and logic devices using printed PFS-co-PVBCi (3:7) dielectrics with stable operation properties. Therefore, we believe that this study will facilitate the printing and synthesis of polymer dielectrics to produce printed and flexible OTFTs.

Enhancing Light Absorption and Prolonging Charge Separation in Carbon Quantum Dots via Cl-Doping for Visible-Light-Driven Photocharge-Transfer Reactions.

Limited light absorption beyond the UV region and rapid photocarrier recombination are critical impediments for the improved photocatalytic performance of carbon quantum dots (CQDs) under visible-light irradiation. Herein, we demonstrate single-step microwave-assisted syntheses of O-CQDs (typical CQDs terminated by carboxylic and hydroxyl functional groups) from a sucrose precursor and Cl-doped CQDs (Cl-CQDs) from a sucralose precursor in short reaction times and without using obligatory strong acids for Cl doping. The doping of Cl into the CQDs is observed to widen the absorption range and facilitate an enhanced separation of photoexcited charge carriers, which is confirmed by the results of optical absorption, photothermal response, and pump-probe ultrafast transient absorption spectroscopy measurements of the O-CQDs and Cl-CQDs. The photoexcited charge carriers with their longer lifetimes in Cl-CQDs enabled the quick degradation of methylene blue dye, rapid conversion of Ag+ ions to metallic Ag nanoparticles on the CQD surfaces, and reduction of GO to a well-dispersed rGO through the photoelectron transfer reactions under visible-light irradiation. The facile Cl doping strategy, hybridization of Ag nanoparticles or rGO to CQDs, and the elevated charge separation mechanism would open up new avenues in designing CQD-based materials for futuristic applications.

Omnidirectionally Stretchable Organic Transistors for Use in Wearable Electronics: Ensuring Overall Stretchability by Applying Nonstretchable Wrinkled Components.

With the emergence of wearable human interface technologies, new applications based on stretchable electronics, such as skin-attached sensors or wearable displays, must be developed. Difficulties associated with developing electronic components with the high stretchabilities required for such applications have restricted the range of appearance and utilization of cost- or process-efficient stretchable electronics. Herein, we present omnidirectionally stretchable wrinkled transistors having a shape that replicates human skin, which operates stably on deformable objects or complex surfaces. Our device offers excellent mechanical and electrical stabilities for preserving relative field-effect mobilities within a standard deviation of nearly 5.6%, under a strain level of up to 62%. Even after 10 000 cycles of stretching to 60% strain, the devices exhibited stable operation with little performance changes. These results indicate that the devices display stretchability properties superior to those of organic transistor arrays by utilizing existing nonstretchable device components.

Facile Photo-cross-linking System for Polymeric Gate Dielectric Materials toward Solution-Processed Organic Field-Effect Transistors: Role of a Cross-linker in Various Polymer Types.

Energy-efficient solution-processed organic field-effect transistors (OFETs) are highly sought after in the low-cost printing industry as well as for the manufacture of flexible and other next-generation devices. The fabrication of such electronic devices requires high-functioning insulating materials that are chemically and mechanically robust to avoid lowering insulating properties during the device fabrication process or utilization of devices. In this study, we report a facile, fluorinated, UV-assisted cross-linker series using a fluorophenyl azide (FPA), which reacts with the C-H groups of a conventional polymer. This demonstrates the application of the cross-linked films in OFET gate dielectrics. The effects of the cross-linkable chemical structure of the FPA series on the cross-linking chemistry, photopatternability, and dielectric properties of the resulting films are investigated for low/high-k or amorphous/crystalline polymeric gate dielectric materials. The characteristics of insulating layers and behavior of OFETs containing these cross-linked gate dielectrics (for example, leakage current density (J), hysteresis, and charge trap density) depend on the polymer type. Furthermore, an organic-based complementary inverter and various printable OFETs with excellent electrical characteristics are successfully fabricated. Thus, these reported cross-linkers that enable the solution process and patterning of well-developed conventional polymer dielectric materials are promising for the realization of a more sustainable next-generation industrial technology for flexible and printable devices.

Electrohydrodynamic-Jet (EHD)-Printed Diketopyrrolopyroole-Based Copolymer for OFETs and Circuit Applications.

We report the employment of an electrohydrodynamic-jet (EHD)-printed diketopyrrolopyrrole-based copolymer (P-29-DPPDTSE) as the active layer of fabricated organic field-effect transistors (OFETs) and circuits. The device produced at optimal conditions showed a field-effect mobility value of 0.45 cm2/(Vs). The morphologies of the printed P-29-DPPDTSE samples were determined by performing optical microscopy, X-ray diffraction, and atomic force microscopy experiments. In addition, numerical circuit simulations of the optimal printed P-29-DPPDTSE OFETs were done in order to observe how well they would perform in a high-voltage logic circuit application. The optimal printed P-29-DPPDTSE OFET showed a 0.5 kHz inverter frequency and 1.2 kHz ring oscillator frequency at a 40 V supply condition, indicating the feasibility of its use in a logic circuit application at high voltage.

Side chain engineering in DTBDT-based small molecules for efficient organic photovoltaics.

A new small-molecule donor with a dithieno[2,3-d:2',3'-d']-benzo[1,2-b:4,5-b']-dithiophene (DTBDT) core and both alkyl and alkylthio substituents is designed and synthesized to improve the miscibility between DTBDT-based small molecules and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM). The alkyl substituent on the 4-position and the alkylthio substituent on the 5-position of the substituted thiophene are expected to improve intermolecular interactions and prevent severe aggregation of the small molecules. The new small molecule, DTBDT-S-C8-TTR, exhibits a homogenous blend morphology with small domains and edge-on-oriented crystalline structures in blends with PC71BM, and give a maximum power conversion efficiency (PCE) of 8.43%. To recover the crystallinity of the DTBDT-S-C8-TTR small molecules weakened after being blended with PC71BM, a solvent vapor annealing (SVA) treatment is performed. The SVA-treated blend films reveal well-developed crystalline domains with interconnected fibrillar structures. This blend morphology allows efficient charge carrier transport in blends and leads to increased PCEs. The maximum PCE of 9.18% achieved using DTBDT-S-C8-TTR suggests that substituting both alkylthio and alkyl groups into DTBDT can yield small-molecule-based organic photovoltaics (OPVs) displaying improved photovoltaic performances.

Acene-Modified Small-Molecule Donors for Organic Photovoltaics.

A series of acene-modified small molecules have been designed and synthesized, and their photovoltaic characteristics were studied by using the small molecules in organic photovoltaics (OPVs). Different cores were introduced to modulate the conjugation lengths of the small molecules and the bulk heterojunction (BHJ) morphologies. Three small-molecule donors were prepared, namely Ph-TTR, Na-TTR, and An-TTR, which have phenyl, naphthalene, and anthracene moieties, respectively, as conjugated cores. These donors were synthesized in a few steps and exhibited favorable BHJ morphologies, thereby giving promising power conversion efficiencies (PCEs). The donors showed excellent miscibility with the acceptor PC71 BM, and the use of the additive 1,8-diiodooctane (DIO) led to a remarkable increase in crystallinity, thereby increasing the PCEs of their OPVs. Of the three donors, Na-TTR showed the most efficient charge carrier generation and favorable molecular packing structures; hence, of the three types of devices tested, the Na-TTR:PC71 BM devices exhibited the highest PCE, specifically 6.27 %, without pre- or post-treatments. The promising PCEs achieved from these easily synthesized acene-modified small molecules suggested that acene-modified small molecules can be useful materials in OPVs.

Sol⁻Gel-Processed Organic⁻Inorganic Hybrid for Flexible Conductive Substrates Based on Gravure-Printed Silver Nanowires and Graphene.

In this study, an organic⁻inorganic (O⁻I) nanohybrid obtained by incorporating an alkoxysilane-functionalized amphiphilic polymer precursor into a SiO2⁻TiO2 hybrid network was successfully utilized as a buffer layer to fabricate a flexible, transparent, and stable conductive substrate for solution-processed silver nanowires (AgNWs) and graphene under ambient conditions. The resulting O⁻I nanohybrid sol (denoted as AGPTi) provided a transmittance of the spin-coated AgNWs on an AGPTi-coated glass of 99.4% and high adhesion strength after a 3M tape test, with no visible changes in the AgNWs. In addition, AGPTi acted as a highly functional buffer layer, absorbing the applied pressure between the conductive materials, AgNWs and graphene, and rigid substrate, leading to a significant reduction in sheet resistance. Furthermore, gravure-printed AgNWs and graphene on the AGPTi-based flexible substrate had uniform line widths of 490 ± 15 and 470 ± 12 µm, with 1000-cycle bending durabilities, respectively.

A Quinacridone-Diphenylquinoxaline-Based Copolymer for Organic Field-Effect Transistors.

In this work, we characterized poly(quinacridone-diphenylquinoxaline) (PQCTQx). PQCTQx was synthesized by a Suzuki coupling reaction and the synthesized PQCTQx was used as a polymeric semiconducting material in organic field-effect transistors (OFETs) to research the potential of using quinacridone derivatives. The measured field-effect mobility of the pristine PQCTQx film was 6.1 × 10-3 cm²/(V·s). A PQCTQx film heat-treated at 150 °C exhibited good field-effect performances with a hole mobility of 1.2 × 10-2 cm²/(V·s). The improved OFET behaviors resulting from the mild thermal treatment was attributed to improved packing of the molecules in the film, as determined using X-ray diffraction, and to decreased channel resistance.

Facile and Microcontrolled Blade Coating of Organic Semiconductor Blends for Uniaxial Crystal Alignment and Reliable Flexible Organic Field-Effect Transistors.

The ability to fabricate uniform and high-quality patterns of organic semiconductors using a simple method is necessary to realize high-performance and reliable organic field-effect transistors (OFETs) for practical applications. Here, we report the facile fabrication of chemically patterned substrates in order to provide solvent wetting/dewetting regions and grow patterned crystals during blade coating of a small-molecule semiconductor/insulating polymer blend solution. Polyurethane acrylate is selected as the solvent dewetting material, not only because of its hydrophobicity but also because its patterns are easily produced by selective UV irradiation onto precursor films. 6,13-Bis(triisopropylsilylethynyl)pentacene (TIPS-PEN) crystal patterns are grown on the line-shaped wetting regions of the patterned film, and the crystallinity of TIPS-PEN and alignment of molecules are found using various crystal analysis tools depending on the pattern widths. The smallest width of 5 µm yielded an OFET showing the highest field-effect mobility value of 1.63 cm2/(V·s), which is much higher than the value of the OFET based on the unpatterned TIPS-PEN crystal. Notably, we demonstrate flexible and low-voltage-operating OFETs for practical use of the patterned crystals, and the OFETs show highly stable operation under sustained gate bias stress thanks to the patterned crystals.

Morphology Driven by Molecular Structure of Thiazole-Based Polymers for Use in Field-Effect Transistors and Solar Cells.

The effects of the molecular structure of thiazole-based polymers on the active layer morphologies and performances of electronic and photovoltaic devices were studied. Thus, thiazole-based conjugated polymers with a novel thiazole-vinylene-thiazole (TzVTz) structure were designed and synthesized. The TzVTz structure was introduced to extend the π conjugation and coplanarity of the polymer chains. By combining alkylthienyl-substituted benzo[1,2-b:4,5-b']dithiophene (BDT) or dithieno[2,3-d:2',3'-d']benzo[1,2-b:4,5-b']dithiophene (DTBDT) electron-donating units and a TzVTz electron-accepting unit, enhanced intermolecular interactions and charge transport were obtained in the novel polymers BDT-TzVTz and DTBDT-TzVTz. With a view to using the polymers in transistor and photovoltaic applications, the molecular self-assembly in and their nanoscale morphologies of the active layers were controlled by thermal annealing to enhance the molecular packing and by introducing a diphenyl ether solvent additive to improve the miscibility between polymer donors and [6,6]phenyl-C71-butyric acid methyl ester (PC71 BM) acceptors, respectively. The morphological characterization of the photoactive layers showed that a higher degree of π-electron delocalization and more favorable molecular packing in DTBDT-TzVTz compared with in BDT-TzVTz leads to distinctly higher performances in transistor and photovoltaic devices. The superior performance of a photovoltaic device incorporating DTBDT-TzVTz was achieved through the superior miscibility of DTBDT-TzVTz with PC71 BM and the improved crystallinity of DTBDT-TzVTz in the nanofibrillar structure.

Understanding Structure-Property Relationships in All-Small-Molecule Solar Cells Incorporating a Fullerene or Nonfullerene Acceptor.

To investigate the influence of donor molecule crystallinity on photovoltaic performance in all-small-molecule solar cells, two dithieno[2,3- d:2',3'- d']-benzo[1,2- b:4,5- b']dithiophene (DTBDT)-based small molecules, denoted as DTBDT-Rho and DTBDT-S-Rho and incorporating different side chains, are synthesized and characterized. The photovoltaic properties of solar cells made of these DTBDT-based donor molecules are systemically studied with the [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) fullerene acceptor and the O-IDTBR nonfullerene acceptor to study the aggregation behavior and crystallinity of the donor molecules in both blends. Morphological analyses and a charge carrier dynamics study are carried out simultaneously to derive structure-property relationships and address the requirements of all-small-molecule solar cells. This study reveals exciton decay loss driven by large-scale phase separation of the DTBDT molecules to be a crucial factor limiting photocurrent generation in the all-small-molecule solar cells incorporating O-IDTBR. In the all-small-molecule blends, DTBDT domains with dimensions greater than 100 nm limit the exciton migration to the donor-acceptor interface, whereas blends with PC71BM exhibit homogeneous phase separation with smaller domains than in the O-IDTBR blends. The significant energy losses in nonfullerene-based devices lead to decreased Jsc and fill factor values and unusual decrease in Voc values. These results indicate the modulation of phase separation to be important for improving the photovoltaic performances of all-small-molecule blends. In addition, the enhanced molecular aggregation of DTBDT-S-Rho with the alkylthio side chain leads to higher degrees of phase separation and unfavorable charge transfer, which are mainly responsible for the relatively low photocurrent when using DTBDT-S-Rho compared with that when using DTBDT-Rho. On the other hand, this enhanced molecular aggregation improves the crystallinity of DTBDT-S-Rho and results in its increased hole mobility.

All-Small-Molecule Solar Cells Incorporating NDI-Based Acceptors: Synthesis and Full Characterization.

A series of naphthalene diimide (NDI)-based small molecules were synthesized as nonfullerene acceptors and incorporated in all-small-molecule solar cells. Three NDI-based small molecules, NDICN-T, NDICN-BT, and NDICN-TVT, were designed with different linkers between two NDI units to induce the different conjugation length and modulate the geometric structures of the NDI dimers. The small NDI-based dimer electron acceptors with slip-stacked structures that facilitate π-π stacking interactions and/or hinder excessive aggregation exhibited different morphological behaviors, such as miscibility or crystallinity in bulk heterojunction blends with 7,7'-(4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b']dithiophene-2,6-diyl)bis(6-fluoro-4-(5'-hexyl-[2,2'-bithiophen]-5-yl)benzo[c][1,2,5]thiadiazole) (DTS-F) electron donors. The photovoltaic devices prepared with NDICN-TVT gave the highest power conversion efficiency (PCE) of 3.01%, with an open-circuit voltage (Voc) of 0.75 V, a short-circuit current density (Jsc) of 7.10 mA cm-2, and a fill factor of 56.2%, whereas the DTS-F:NDICN-T and DTS-F:NDICN-BT devices provided PCEs of 1.81 and 0.13%, respectively. Studies of the charge-generation properties, charge-transfer dynamics, and charge-transport properties for understanding the structure-property relations revealed that DTS-F:NDICN-TVT blend films with well-developed domains and well-ordered crystalline structures performed well, whereas an excessive miscibility between DTS-F and NDICN-BT disrupted the crystallinity of the material and yielded a poor device performance.

Directionally Aligned Amorphous Polymer Chains via Electrohydrodynamic-Jet Printing: Analysis of Morphology and Polymer Field-Effect Transistor Characteristics.

Electrohydrodynamic-jet (EHD-jet) printing provides an opportunity to directly assembled amorphous polymer chains in the printed pattern. Herein, an EHD-jet printed amorphous polymer was employed as the active layer for fabrication of organic field-effect transistors (OFETs). Under optimized conditions, the field-effect mobility (µFET) of the EHD-jet printed OFETs was 5 times higher than the highest µFET observed in the spin-coated OFETs, and this improvement was achieved without the use of complex surface templating or additional pre- or post-deposition processing. As the chain alignment can be affected by the surface energy of the dielectric layer in EHD-jet printed OFETs, dielectric layers with varying wettability were examined. Near-edge X-ray absorption fine structure measurements were performed to compare the amorphous chain alignment in OFET active layers prepared by EHD-jet printing and spin coating.

Highly Efficient Visible Blue-Emitting Black Phosphorus Quantum Dot: Mussel-Inspired Surface Functionalization for Bioapplications.

The preparation of blue-emitting black phosphorus quantum dots (BPQDs) is based on the liquid-phase exfoliation of bulk BP. We report the synthesis of soluble BPQDs showing a strong visible blue-light emission. Highly fluorescent (photoluminescence quantum yield of ≈5% with the maximum emission (λmax) at ≈437 nm) and dispersible BPQDs in various organic solvents are first prepared by simple ultrasonication of BP crystals in chloroform in the ambient atmosphere. Furthermore, simple mussel-inspired surface functionalization of BPQDs with catechol-grafted poly(ethylene glycol) in basic buffer afforded water-soluble blue-emitting BPQDs showing long-term fluorescence stability, very low cytotoxicity, and excellent fluorescence live cell imaging capability.