ABSTRACT
Toluene is one of the hydrocarbons that contaminate soil and groundwater, and has a high cost to remediate, which makes it an environmental pollutant of concern. This study aimed to find bacterial distribution from nonwoven geotextile (GT) fabric specimens in a pilot-scale permeable reactive barrier (PRB). Upon 167 days of incubation with the addition of toluene, the microbial community on the GT surfaces (n = 12) was investigated by the 16S rRNA metagenome sequencing approach. According to taxonomic classification, the Proteobacteria phylum dominated the metagenomes of all the geotextile samples (80-90%). Kyoto Encyclopedia of Genes and Genomes (KEGG) Pathway database search of the toluene degradation mechanism revealed the susceptible toluene-degrading species. For the toluene-to-benzoate degradation, the Cupriavidus genus, particularly C. gilardii, C. metallidurans, and C. taiwanensis, are likely to be functional. In addition to these species, the Novosphingobium genus was abundantly localized in the GTs, in particular Novosphingobium sp. ABRDHK2. The results suggested the biodegradation potential of these species in toluene remediation. Overall, this work sheds light on the variety of microorganisms found in the geotextile fabrics used in PRBs and the species involved in the biodegradation of toluene from several sources, including soil, sediment, and groundwater. Supplementary Information: The online version contains supplementary material available at 10.1007/s13205-023-03460-y.
ABSTRACT
A novel hydrogel polymer electrolyte was prepared by incorporation of 1,4-butanediol diglycidyl ether (BG) to cross-linked polyacrylamide (PAM). The electrolyte (PAMBG) was modified with cobalt (II) sulfate with various doping ratios (PAMBGCoX) to increase the capacitance by increasing faradaic reactions. The supercapacitor device assembly was performed by using active carbon (AC) electrodes and hydrogel polymer electrolytes. The specific capacitance of the PAMBGCo5 device indicated 130â F g-1 , which is at least a seven-fold improvement due to the insertion of Co as a redox component. The electrolyte device, PAMBGCo5, displays superior performance having an energy density of 38â Wh kg-1 at a power density of 500â W kg-1 . Additionally, with the same hydrogel, the device performed 10,000 galvanostatic charge-discharge cycles via retaining 91% of the initial capacitance. A cost-effective electrolyte, PAMBGCo5, was tested in a carbon-based supercapacitor under bent and twisted conditions at various angles, confirming the robustness of the device.
ABSTRACT
Since the identification of the COVID-19 outbreak in Wuhan, China, in December 2019, the death toll from the direct infection by COVID-19 has exceeded 775,000, and more than 21 million cases have been reported to the World Health Organization (WHO) around the world. It is strongly believed that its impact might be worsened by poor outdoor and indoor air qualities, particularly on older adults. The nationwide lockdown measures were imposed between March 23 and June 20, 2020, to stop the spread of COVID-19 pandemic in the Kingdom of Saudi Arabia (KSA). In this work, the possible effects of the lockdown on the air quality were investigated using meteorological and air quality datasets obtained from eight monitoring stations covering the Eastern Province of the KSA. The studied air pollutants include carbon monoxide (CO), sulfur dioxide (SO2), nitrogen dioxide (NO2), ozone (O3), and inhalable particulate matter (PM10). The NO2 was found to be the marker pollutant responding best to the lockdown measures since its concentrations decreased at all sites during- and post-lockdown periods and ranged between 12-86% and 14-81%, respectively. Compared with pre-lockdown period, the Eastern Province also experienced significant concentration reductions at varying rates for PM10 (21-70%), CO (5.8-55%), and SO2 (8.7-30%), while O3 concentrations showed increasing rates ranging between 6.3 and 45%. The consequences of these reductions were reflected in easing the outdoor air quality, which might reduce the impact of COVID-19 pandemic, especially on elderly and sensitive groups.
ABSTRACT
Black carbon (BC) particles being emitted from mobile and stationary emission sources as a result of combustion activities have significant impacts on human health and climate change. A lot of social activities have been halted during the COVID-19 lockdowns, which has evidently enhanced the ambient and indoor air quality. This paper investigates the possible emission sources and evaluates the meteorological conditions that may affect the dispersion and transport of BC locally and regionally. Ground-level equivalent BC (eBC) measurements were performed between January 2020 and July 2020 at a university campus located in Dammam city of the Kingdom of Saudi Arabia (KSA). The fossil fuel (eBCff) and biomass burning (eBCbb) fractions of total eBC (eBCt) concentrations were estimated as 84% and 16%, respectively, during the entire study period. The mean eBCbb, eBCff, and eBCt concentrations during the lockdown reduced by 14%, 24%, and 23%, respectively. The results of statistical analyses indicated that local fossil fuel burning emissions and atmospheric conditions apparently affected the observed eBC levels. Long-range potential source locations, including Iraq, Kuwait, Iran, distributed zones in the Arabian Gulf, and United Arab Emirates and regional source areas, such as the Arabian Gulf coastline of the KSA, Bahrain, and Qatar, were associated with moderate to high concentrations observed at the receptor site as a result of cluster analysis and concentration-weighted trajectory analysis methods.
Subject(s)
Air Pollutants , COVID-19 , Environmental Monitoring , Soot/analysis , Air Pollutants/analysis , Bahrain , Humans , Iran , Iraq , Kuwait , Pandemics , Qatar , Saudi Arabia , United Arab EmiratesABSTRACT
This experimental work focused on the synthesis, characterization, and testing of a unique, magnetically separable, and eco-friendly adsorbent composite material for the advanced treatment and efficient removal of nitrate and phosphate pollutants from wastewater. The MgAl-augmented double-layered hydroxide (Mg-Fe/LDH) intercalated with sludge-based activated carbon (SBAC-MgFe) composites were characterized by FT-IR, XRD, BET, VSM, SEM, and TEM techniques, revealing homogeneous and efficient dispersion of MgFe/LDH within the activated carbon (AC) matrix, a highly mesoporous structure, and superparamagnetic characteristics. The initial solution pH, adsorbent dose, contact time, and temperature parameters were optimized in order to reach the best removal performance for both pollutants. The maximum adsorption capacities of phosphate and nitrate were found to be 110 and 54.5 mg/g, respectively. The competition between phosphate and coexisting ions (Cl-, CO32-, and SO42-) was studied and found to be remarkably lower in comparison with the nitrate adsorption. The adsorption mechanisms were elucidated by kinetic, isotherm, thermodynamic modeling, and post-adsorption characterizations of the composite. Modeling and mechanistic studies demonstrated that physisorption processes such as electrostatic attraction and ion exchange mainly governed the nitrate and phosphate adsorption. The composite indicated an outstanding regeneration performance even after five sequences of adsorption/desorption cycles. The fabricated composite with magnetically separable characteristics can be used as a promising adsorbent for the removal of phosphate and nitrate pollutants from wastewater.
ABSTRACT
The present study investigates the performance of a pilot-scale Sequencing Batch Reactor (SBR) process for the treatment of wastewater quality parameters, including turbidity, total suspended solids (TSS), total solids (TS), nitrogen (ammonia (NH3-N), nitrite (NO2-), and nitrate (NO3-), phosphate (PO43-), the chemical oxygen demand (COD), and the 5-day biological oxygen demand (BOD5), from municipal wastewater. Two scenarios, namely, pre-anoxic denitrification and post-anoxic denitrification, were investigated to examine the performance of a pilot-scale SBR on the wastewater quality parameters, particularly the nitrogen removal. The correlation statistic was applied to explain the effects of operational parameters on the performance of the SBR system. The results revealed that the post-anoxic denitrification scenario was more efficient for higher qualify effluent than the first scenario. The effluent concentrations of the targeted wastewater quality parameters obtained for the proposed SBR system were below those of the local standards, while its performance was better than that of the North Sewage Treatment Plant, Dharan, Eastern province, Kingdom of Saudi Arabia (KSA), in terms of the BOD5, COD, TN, and PO43- treatment efficiencies. These results indicated the suitability of SBR technology for wastewater treatment in remote areas in the KSA, with a high potential of reusability for sustainable wastewater management.
Subject(s)
Bioreactors , Sewage , Waste Disposal, Fluid , Wastewater , Anaerobiosis , Biological Oxygen Demand Analysis , Bioreactors/standards , Nitrogen , Saudi Arabia , Waste Disposal, Fluid/methods , Wastewater/chemistryABSTRACT
In this study, date-palm biochar MgAl-augmented double-layered hydroxide (biochar-MgAl-LDH) nanocomposite was synthesized, characterized, and used for enhancing the removal of phosphate and nitrate pollutants from wastewater. The biochar-MgAl-LDH had higher selectivity and adsorption affinity towards phosphate compared to nitrate. The adsorption kinetics of both anions were better explained by the pseudo-first-order model with a faster removal rate to attain equilibrium in a shorter time, especially at lower initial phosphate-nitrate concentration. The maximum monolayer adsorption capacities of phosphate and nitrate by the non-linear Langmuir model were 177.97 mg/g and 28.06 mg/g, respectively. The coexistence of anions (Cl-, SO42-, NO3-, CO32- and HCO3-) negligibly affected the removal of phosphate due to its stronger bond on the nano-composites, while the presence of Cl- and PO43- reduced the nitrate removal attributed to the ions' participation in the active adsorption sites on the surface of biochar-MgAl-LDH. The excellent adsorptive performance is the main synergetic influence of the MgAl-LDH incorporation into the biochar. The regeneration tests confirmed that the biochar-MgAl composite can be restored effortlessly and has the prospective to be reused after several subsequent adsorption-desorption cycles. The biochar-LDH further demonstrated capabilities for higher removal of phosphate and nitrate from real wastewater.
ABSTRACT
The development of adsorbents with high adsorption capacity and fast separation is of utmost importance for the environmental management of dye-bearing wastewaters. Within this scope, crosslinked hydrogels including poly(vinylphosphonic acid) (PVPA) and bis[2-(methacryloyloxy)ethyl] phosphate (BMEP) were designed with varying mole ratios of BMEP (5-40%). The Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) results revealed that the fabrication of crosslinked PVPA-BMEP hydrogels enhanced: (i) functionalities of PA groups in the structure of hydrogels, (ii) thermal stabilities up to 250 °C, and (iii) interaction between methylene blue (MB) molecules and hydrogels. The pseudo second-order kinetic model best described the experimental adsorption data. The behaviors of the isotherms were more appropriate for Langmuir than Freundlich isotherm for the experimental data. PVPA-BMEP (40%) hydrogel indicated a fast and an outstanding MB adsorption capacity of 2841 mg g-1, which has not been reported yet for polymer hydrogels, to the best of our knowledge. The thermodynamic studies concluded that MB adsorption process was spontaneous and exothermic in nature. The overall results suggest that the designed and fabricated PVPA-BMEP hydrogels have great potential for the efficient removal of coloring materials from wastewaters.
ABSTRACT
Greenhouse gas emissions resulting from municipal solid waste management activities and the associated climate change impacts are getting great attention worldwide. This study investigates greenhouse gas emissions and their distribution during waste collection and transport activities in the Dammam region of Saudi Arabia. Greenhouse gas emissions and associated global warming factors were estimated based on diesel fuel consumption during waste collection and transport activities. Then, waste collection and transport data were used to parameterise a mechanistic collection model that can be used to estimate and predict future fuel consumption and greenhouse gas emissions. For the collection and transport of municipal waste in the study area, the average associated total greenhouse gas emissions were about 24,935 tCO2-eq. Global warming factors for three provinces were estimated as 25.23 kg CO2-eq t-1, 25.04 kg CO2-eq t-1, and 37.15 kg CO2-eq t-1, respectively. Lastly, the American Meteorological Society/Environmental Protection Agency Regulatory Model (AERMOD) modelling system was used to estimate the atmospheric dispersion of greenhouse gas emissions. Model results revealed that the maximum daily greenhouse gas concentrations ranged between 0.174 and 97.3 mg m-3, while annual average greenhouse gas concentrations were found to be between 0.012 and 27.7 mg m-3 within the study domain. The highest greenhouse gas concentrations were observed for the regions involving the municipal solid waste collection routes owing to their higher source emission rates.
Subject(s)
Greenhouse Gases , Refuse Disposal , Carbon Dioxide , Global Warming , Greenhouse Effect , Solid WasteABSTRACT
Physicochemical and morphological characteristics of atmospheric particles in new urban centers of fast-developing megacities are not well understood. In this study, atmospheric coarse particles (PM2.5-10) were simultaneously collected in multiple stations (10) in new urban centers, namely Beylikduzu, Buyukcekmece, and Esenyurt, of Istanbul using a modified passive particulate sampling method. Scanning electron microscope and energy dispersive X-photon spectroscopy (SEM-EDS) was used to investigate the size distribution characteristics, chemical composition and their weight percent abundances, and morphological properties of the collected particles. The particle clusters were mainly dominated by Ca-rich Al silicates, Ca dominant, Ca- and S-rich, and NaCl particles, respectively. Their potential sources were assigned to the natural sources (e.g., wind erosion, soil resuspension, and sea sprays) and anthropogenic activities (construction, transportation, mining and crushing, and cement production). In addition to the major contributions (up to 47% of particle number abundance), the minor contribution clusters (less than 1%) with transitional metals rich particles (Fe, Zn, and Cu rich) mainly from anthropogenic sources (combustion, traffic, and vehicular emissions) were identified. The typical size range (> 0.65 to < 11.00 µm) distribution of the major particle clusters fits a left-skewed modal distribution with a peak at 1.10-2.30-µm size range. However, the number of particles decreases significantly with increasing distance to the source, and this justification is stronger for larger size fractions (> 2.3 µm). Particle numbers and varieties indicated significant spatial variations depending upon the identified sources, meteorological factors, and temporal conditions. In general, the results of this study suggest that the passive sampling of PM2.5-10 coupled with SEM/EDS based single-particle analysis is an effective tool to understand the physicochemical characterization and spatial and temporal variations of atmospheric particles in urban environments.
Subject(s)
Air Pollutants/analysis , Environmental Monitoring/methods , Particulate Matter/analysis , Cities , Meteorological Concepts , Mining , Particle Size , Spectrometry, X-Ray Emission , Vehicle Emissions/analysisABSTRACT
This article introduces a simple, rapid, and reliable solid-phase microextraction (SPME) method coupled with GC-MS for the quantitative determination of 16 polycyclic aromatic hydrocarbons in water. In this study, the Taguchi experimental design was used to optimize extraction conditions of polycyclic aromatic hydrocarbons using SPME method to obtain highly enriched analytes. Consequently, quantitative determination of polycyclic aromatic hydrocarbons in water was achieved by GC-MS technique. The selected parameters affecting enrichment of polycyclic aromatic hydrocarbons were sample extraction time, stirring speed, temperature, ionic strength, and pH. The study revealed that optimal operating conditions were found to be 90-min extraction time, 1400 rpm stirring speed, and 60°C sample temperature. The effect of ionic strength and pH were shown to be insignificant. Optimized conditions were also reevaluated by placing the 16 polycyclic aromatic hydrocarbons into several subgroups based on their molecular weight. The extraction efficiency of polycyclic aromatic hydrocarbons with low molecular weight was shown to be a function of only the extracting temperature. Satisfactory results were obtained for linearity (0.983-0.999), detection limits (2.67-18.02 ng/L), accuracy (71.2-99.3%), and precision (4.3-13.5%). The optimum conditions reported by other design approaches were evaluated and generalized optimum conditions were suggested.