ABSTRACT
A deep understanding of the factors influencing the morphology of thin films based on conjugated polymers is essential to boost their performance in optoelectronic devices. Herein, we investigated the electronic structure and morphology of thin films of the copolymer poly(9,9-dioctyl-fluorenyl-co-bithiophene) (F8T2) in its pristine form as well as samples processed with the solvent additive 1,8-diiodooctane (DIO) or post-processed through thermal annealing treatment. Measurements were carried out using angle-resolved S K-edge NEXAFS (near-edge X-ray absorption fine structure) in total electron yield (TEY) and fluorescence yield (FY) detection modes. Two main transitions were observed at the S 1s NEXAFS spectra: S 1s â π* and S 1s â σ* (S-C). The observed dichroism pointed to a face-on orientation of the conjugated backbone, which was significantly increased for F8T2 films processed with DIO. Resonant Auger decay spectra were obtained and analyzed using the core-hole clock (CHC) method. An enhancement in the charge transfer process was observed for thermally annealed films, especially for samples processed with DIO, corresponding to an increase in film ordering. Furthermore, the investigated films were characterized using X-ray photoelectron spectroscopy, attesting to the presence of the thiophene unit in the samples and demonstrating that some of its sulfur atoms were positively polarized in the F8T2 films. All these experimental findings were compared with molecular dynamics (MD) simulations of film evaporation with and without DIO. The use of MD, together with mathematical modeling, was able to explain the major effects found in the experiments, including the polarization of sulfur atoms. The simultaneous use of powerful spectroscopic techniques and theoretical methods shed light on key aspects linking film morphology with fabrication procedures.
ABSTRACT
Quarter horses (QH), a prominent athletic breed in Brazil, are affected by muscular genetic disorders such as myosin-heavy chain myopathy (MYHM), polysaccharide storage myopathy (PSSM1), hyperkalemic periodic paralysis (HyPP), and malignant hyperthermia (MH). Bull-catching (vaquejada), primarily involving QH, is a significant equestrian sport in Brazil. Since the allele frequencies (AF) of MYHM, PSSM1, HyPP, and MH in vaquejada QH remain unknown, this study evaluated the AF in 129 QH vaquejada athletes, specifically from the Brazilian Northeast. These variants were exclusively observed in heterozygosity. The MYHM exhibited the highest AF (0.04 ±0.01), followed by PSSM1 (0.01 ±0.01) and the HyPP variant (0.004 ±0.01), while the MH variant was not identified in this study. This study represents the first identification of these variants in vaquejada QH, emphasizing the need to implement measures to prevent the transmission of pathogenic alleles and reduce the occurrence of clinical cases of these genetic diseases.
Subject(s)
Gene Frequency , Horse Diseases , Horses , Muscular Diseases , Muscular Diseases/congenital , Muscular Diseases/genetics , Muscular Diseases/veterinary , Animals , Horses/genetics , Horse Diseases/genetics , Male , Female , Brazil , Paralysis, Hyperkalemic Periodic/genetics , Paralysis, Hyperkalemic Periodic/veterinary , Malignant Hyperthermia/genetics , Malignant Hyperthermia/veterinary , Polysaccharides/metabolism , Genetic TestingABSTRACT
Solid-state composite electrolytes have arisen as one of the most promising materials classes for next-generation Li-ion battery technology. These composites mix ceramic and solid-polymer ion conductors with the aim of combining the advantages of each material. The ion-transport mechanisms within such materials, however, remain elusive. This knowledge gap can to a large part be attributed to difficulties in studying processes at the ceramic-polymer interface, which are expected to play a major role in the overall ion transport through the electrolyte. Computational efforts have the potential of providing significant insight into these processes. One of the main challenges to overcome is then to understand how a sufficiently robust model can be constructed in order to provide reliable results. To this end, a series of molecular dynamics simulations are here carried out with a variation of certain structural (surface termination and polymer length) and pair potential (van der Waals parameters and partial charges) models of the Li7La3Zr2O12 (LLZO) poly(ethylene oxide) (PEO) system, in order to test how sensitive the outcome is to each variation. The study shows that the static and dynamic properties of Li-ion are significantly affected by van der Waals parameters as well as the surface terminations, while the thickness of the interfacial region - where the structure-dynamic properties are different as compared to the bulk-like regime - is the same irrespective of the simulation setup.
ABSTRACT
Non-fullerene electron acceptors have emerged as promising alternatives to traditional electron-acceptors in the active layers of organic photovoltaics. This is due to their tunable energy levels, optical response in the visible light spectrum, high electron mobility, and photochemical stability. In this study, the electronic properties of two representative non-fullerene acceptors, ITIC and Y5, have been calculated within the framework of density functional theory using a range of hybrid and non-hybrid density functionals. Screened range-separated hybrid (SRSH) approaches were also tested. The results are analyzed in light of the previously reported experimental outcomes. Specifically, we have calculated the oxidation and reduction potentials, fundamental and optical gaps, the highest occupied molecular orbital and lowest unoccupied molecular orbital energies, and exciton binding energies. Additionally, we have investigated the effects of the medium dielectric constant on these properties employing a universal implicit solvent model. It was found that hybrid functionals generally perform poorly in predicting oxidation potentials, while non-hybrid functionals tend to overestimate reduction potentials. The inclusion of a large Hartree-Fock contribution to the global or long range was identified as the source of inaccuracy for many hybrid functionals in predicting both redox potentials and the fundamental and optical gaps. Corroborating with the available literature, â¼50% of all tested functionals predicted very small exciton binding energies, within the range of ±0.1 eV, that become even smaller by increasing the dielectric constant of the material. Finally, the OHSE2PBE and tHCTHhyb functionals and the optimal tuning SRSH approach emerged as the best-performing methods, with good accuracy in the description of the electronic properties of interest.
ABSTRACT
Simultaneous analysis studies of several agronomic traits in cultivated plants make it possible to identify phenotypic and genotypic differences due to environmental variations, such as altitude. Therefore, the objective was to evaluate, through multivariate analysis of agronomic, physicochemical and physiological characters, passion fruit hybrids cultivated in different environments. The hybrids used were Gigante Amarelo, Rubi do Cerrado and Sol do Cerrado, cultivated in the southern region of Espírito Santo in four municipalities/environments: Marataízes (41 m), Jerônimo Monteiro (104 m), Alegre (711 m), and Ibitirama (1016 m). The agronomic characters of the plants, the physical-chemical characteristics of the fruits and the physical, biochemical and physiological qualities of the seeds were analyzed. The Singh method was used to determine the most important differentiating characters between hybrids growing in different environments. Based on these characters, a dissimilarity matrix was generated and a principal coordinate analysis was performed. It was observed that the pulp yield was influenced by altitude. The three hybrids showed greater performance in terms of agronomic characters at altitude (41 m) than at altitude (104 m). The Sol do Cerrado hybrid showed high performance in the physical-chemical characteristics of the fruits at altitude (104 m).
Subject(s)
Fruit , Passiflora , Fruit/genetics , Passiflora/genetics , Seeds , Agriculture , Multivariate AnalysisABSTRACT
Mononuclear polypyridine ruthenium (Ru) complexes can catalyze various reactions, including water splitting, and can also serve as photosensitizers in solar cells. Despite recent progress in their synthesis, accurately modeling their physicochemical properties, particularly in solution, remains challenging. Herein, we conduct a theoretical investigation of the structural and electronic properties of a mononuclear Ru-aqua polypyridine complex in aqueous solution, considering five of its possible oxidation/protonation states species: [RuII(H2O)(py)(bpy)2]2+, [RuII(OH)(py)(bpy)2]+, [RuIII(H2O)(py)(bpy)2]3+, [RuIII(OH)(py)(bpy)2]2+ and [RuIV(O)(py)(bpy)2]2+, where py = pyridine and bpy = 2,2'-bipyridine. At first, we investigate the impact of proton-coupled and non-coupled electron transfer reactions on the geometry and electronic structure of the complexes in vacuum and in solution, using an implicit solvent model. Then, using a sequential multiscale approach that combines quantum mechanics and molecular mechanics (S-QM/MM), we examine the explicit solvent effects on the electronic excitations of the complexes, and compare them with the experimental results. The complexes were synthesized, and their absorption spectra measured in aqueous solution. To accurately describe the QM interactions between the metal center and the aqueous ligand in the MM simulations, we developed new force field parameters for the Ru atom. We analyze the solvent structure around the complexes and account for its explicit influence on the polarization and electronic excitations of the complexes. Notably, accounting for the explicit solvent polarization effects of the first solvation shells is essential to correctly describe the energy of the electronic transitions, and the explicit treatment of the hydrogen bonds at the QM level in the excitation calculations improves the accuracy of the description of the metal-to-ligand charge-transfer bands. Transition density matrix analysis is used to characterize all electronic transitions in the visible and ultraviolet ranges according to their charge-transfer (CT) character. This study elucidates the electronic structure of those ruthenium polypyridyl complexes in aqueous solution and underscores the importance of precisely describing solvent effects, which can be achieved employing the S-QM/MM method.
ABSTRACT
Recent years have seen an increasing interest in molecular electrocatalysts for the hydrogen evolution reaction (HER). Efficient hydrogen evolution would play an important role in a sustainable fuel economy, and molecular systems could serve as highly specific and tunable alternatives to traditional noble metal surface catalysts. However, molecular catalysts are currently mostly used in homogeneous setups, where quantitative evaluation of catalytic activity is non-standardized and cumbersome, in particular for multistep, multielectron processes. The molecular design community would therefore be well served by a straightforward model for prediction and comparison of the efficiency of molecular catalysts. Recent developments in this area include attempts at applying the Sabatier principle and the volcano plot concept - popular tools for comparing metal surface catalysts - to molecular catalysis. In this work, we evaluate the predictive power of these tools in the context of experimental operating conditions, by applying them to a series of tetraphenylporphyrins employed as molecular electrocatalysts of the HER. We show that the binding energy of H and the redox chemistry of the porphyrins depend solely on the electron withdrawing ability of the central metal ion, and that the thermodynamics of the catalytic cycle follow a simple linear free energy relation. We also find that the catalytic efficiency of the porphyrins is almost exclusively determined by reaction kinetics and therefore cannot be explained by thermodynamics alone. We conclude that the Sabatier principle, linear free energy relations and molecular volcano plots are insufficient tools for predicting and comparing activity of molecular catalysts, and that experimentally useful information of catalytic performance can still only be obtained through detailed knowledge of the catalytic pathway for each individual system.
ABSTRACT
The determination of molecular conformations of oligomeric acceptors (OAs) and their impact on molecular packing are crucial for understanding the photovoltaic performance of their resulting polymer solar cells (PSCs) but have not been well studied yet. Herein, we synthesized two dimeric acceptor materials, DIBP3F-Se and DIBP3F-S, which bridged two segments of Y6-derivatives by selenophene and thiophene, respectively. Theoretical simulation and experimental 1D and 2D NMR spectroscopic studies prove that both dimers exhibit O-shaped conformations other than S- or U-shaped counter-ones. Notably, this O-shaped conformation is likely governed by a distinctive "conformational lock" mechanism, arising from the intensified intramolecular π-π interactions among their two terminal groups within the dimers. PSCs based on DIBP3F-Se deliver a maximum efficiency of 18.09 %, outperforming DIBP3F-S-based cells (16.11 %) and ranking among the highest efficiencies for OA-based PSCs. This work demonstrates a facile method to obtain OA conformations and highlights the potential of dimeric acceptors for high-performance PSCs.
ABSTRACT
This study refers to the archaeometric analysis of ceramic fragments found in archaeological excavations around slave quarters of Colégio dos Jesuítas and São Bento plantations, both located in Campos dos Goytacazes - RJ. The question whether handmade ceramics were produced by the slaves themselves or acquired through local trade networks is an open and important question in the African diaspora. Samples of clay sources and the ceramic fragments, were analyzed using the EDXRF technique with the aid of multivariate statistical analysis.
Subject(s)
Enslaved Persons , Humans , Brazil , Ceramics , Multivariate AnalysisABSTRACT
1. The purpose of this study was to determine the metabolisable energy of high-protein distiller's dried grains with solubles (HP-DDGS) for meat quail (Coturnix coturnix coturnix; Experiment I) and evaluate the effects of dietary levels of HP-DDGS on animal performance, carcase characteristics, meat quality, and organ weights (Experiment II).2. In Experiment 1, 96 meat quail were distributed in a completely randomised design with two treatments (reference or test diet) and six replicates of eight birds. The experimental period consisted of 5 d adaptation, followed by 5 d total excreta collection. The experimental diets consisted of a reference (control) and a test diet formulated with 800 g/kg reference diet and 200 g/kg HP-DDGS.3. In Experiment 2, 612 meat quail were distributed in a completely randomised design fed one of six dietary levels of HP-DDGS (0, 85, 170, 255, 340, or 425 g/kg) as a replacement for soybean meal. At 42 d of age, birds were slaughtered and evaluated for carcase yield, organ weights, and meat quality.4. Apparent metabolisable energy values corrected for nitrogen retention of HP-DDGS were 12.5 and 12.3 MJ/kg for males and females, respectively.5. In the starter phase (1-21 d of age), increasing dietary HP-DDGS levels had a quadratic effect on body weight (BW) (P = 0.020) and body weight gain (BWG) (P = 0.019). The maximum BW and BWG values were estimated to be achieved with 296.0 and 296.2 g/kg dietary HP-DDGS, respectively. Overall (1-42 d of age), increasing dietary HP-DDGS levels in replacement of soybean meal did not affect animal performance, carcase yield, meat quality or organ weight in meat quail.6. It was concluded that dietary HP-DDGS can fully replace soybean meal in meat quail diets without affecting growth performance, carcase yield, meat quality or organ weight.
Subject(s)
Coturnix , Quail , Male , Female , Animals , Flour , Chickens , Diet/veterinary , Dietary Proteins , Meat , Glycine max , Body Weight , Animal Feed/analysis , Animal Nutritional Physiological Phenomena , Edible Grain , Zea maysABSTRACT
The superlithiation of organic anodes is a promising approach for developing the next generation of sustainable Li-ion batteries with high capacity. However, the lack of fundamental understanding hinders its faster development. Here, a systematic study of the lithiation processes in a set of dicarboxylate-based materials is carried out within the density functional theory formalism. It is demonstrated that a combined analysis of the Li insertion reaction thermodynamics and the conjugated-moiety charge derivative enables establishing the experimentally observed maximum storage, thus allowing an assessment of the structure-function relationships also.
ABSTRACT
The present study investigates dumbbell-shaped nematic liquid crystal shells. Using molecular dynamics (MD) simulations, we consider the effects of an external electric field on nematic ordering by computing the average molecular alignment's time evolution and equilibrium configuration. We show that the number and location of topological defects are strongly affected by the external field, with the orientational ordering's equilibrium configuration depending on field direction about the shell's long axis. For a transverse external field, it is verified that the defect rearrangement presents a non-linear dynamics, with a field independent characteristic time scale delimiting the short and long time regimes. Effects associated with varying the shell's Gaussian curvature are also analyzed.
ABSTRACT
A photonic connection between turbulence and spin glasses has been recently established both theoretically and experimentally using a random fiber laser as a photonic platform. Besides unveiling this interplay, it links the works of two 2021 Nobel laureates in Physics.
ABSTRACT
In this work, the Li-ion insertion mechanism in organic electrode materials is investigated through the lens of atomic-scale models based on first-principles theory. Starting with a structural analysis, the interplay of density functional theory with evolutionary and potential-mapping algorithms is used to resolve the crystal structure of the different (de)lithiated phases. These methods elucidate different lithiation reaction pathways and help to explore the formation of metastable phases and predict one- or multi-electron reactions, which are still poorly understood for organic intercalation electrodes. The cathode material dilithium 2,5-oxyterephthalate (operating at 2.6â V vs. Li/Li+) is investigated in depth as a case study, owing to its rich redox chemistry. When compared with recent experimental results, it is demonstrated that metastable phases with peculiar ring-ring molecular interactions are more likely to be controlling the redox reactions thermodynamics and consequently the battery voltage.
ABSTRACT
Understanding the interactions and the solvent effects on the distribution of several species in equilibrium and how it can influence the 1H-NMR properties, spectroscopy (UV-vis absorption), and the acid-base equilibria can be especially challenging. This is the case of a bis-bidentate bridging ligand bis(2-pyridyl)-benzo-bis(imidazole), where the two pyridyl and four imidazolyl nitrogen atoms can be protonated in different ways, depending on the solvent, generating many isomeric/tautomeric species. Herein, we report a combined theoretical-experimental approach based on a sequential quantum mechanics/molecular mechanics procedure that was successfully applied to describe in detail the acid-base characterization and its effects on the electronic properties of such a molecule in solution. The calculated free-energies allowed the identification of the main species present in solution as a function of the solvent polarity, and its effects on the magnetic shielding of protons (1H-NMR chemical shifts), the UV-vis absorption spectra, and the acid-base equilibrium constants (pKas) in aqueous solution. Three acid-base equilibrium constants were experimentally/theoretically determined (pKa1 = 1.3/1.2, pKa2 = 2.1/2.2 and pKa5 = 10.1/11.3) involving mono-deprotonated and mono-protonated cis and trans species. Interestingly, other processes with pKa3 = 3.7 and pKa4 = 6.0 were also experimentally determined and assigned to the protonation and deprotonation of dimeric species. The dimerization of the most stable neutral species was investigated by Monte Carlo simulations and its electronic effects were considered for the elucidation of the UV-vis absorption bands, revealing transitions mainly with the charge-transfer characteristic and involving both the monomeric species and the dimeric species. The good matching of the theoretical and experimental results provides an atomistic insight into the solvent effects on the electronic properties of this bis-bidentate bridging ligand.
ABSTRACT
BACKGROUND: Human gait is a complex task resulting from the interaction of sensory perception, muscle force output, and sensory-motor integration, which declines with the aging process and impacts gait speed in older women. RESEARCH QUESTION: What are the separate and combined impacts of sensory-motor factors on gait speed of older women? METHODS: Sixty healthy older women (69.3⯱â¯5.9 years) volunteered for this study. A previous screening using Pearson's correlation selected variables significantly correlated with gait speed: age, plantar tactile perception, lower limb explosive force, and mean velocity (MV) of the center of pressure (CoP). Simple and multivariate regression models were performed with selected variables. The magnitude of evidence was obtained using Bayesian inference, determining posterior probabilities based on our data. RESULTS: Gait speed was negatively correlated with age and positively correlated with plantar tactile perception, MV (Romberg index), and lower limb explosive force. The coefficient of determination (R2) varied between 0.06 for plantar tactile perception and 0.22 for explosive force (pâ¯<â¯0.05). The multivariate model, including age, MV (Romberg index), and lower limb explosive force, explained 44% (R2 =â¯0.44) of the variance in gait speed, with a small standard error of estimate (0.14â¯m/s). Bayesian inference confirmed the good posterior probability of the model. SIGNIFICANCE: Age, plantar tactile perception, MV (Romberg index), and lower limb explosive force impact gait speed, whereas the combination of the first three factors has an excellent posterior probability of predicting or affecting gait speed.
Subject(s)
Independent Living , Walking Speed , Aged , Bayes Theorem , Female , Gait/physiology , Humans , Lower Extremity , Walking Speed/physiologyABSTRACT
BACKGROUND: In Brazil, regarding drug and alcohol treatment, there is an emphasis on financing long-term residential treatment and a lack of community-based approaches, leading to a burden on families. Therefore, family members increasingly seek coerced treatment even though there are reports of human rights violations in this context. This study aims to describe the meanings constructed by family members regarding coerced treatment of people who use alcohol and other drugs. METHODS: We conducted 15 interviews with the family members of people who use alcohol and other drugs and had requested coerced treatment. The interviews were recorded, transcribed and analyzed using reflexive thematic analysis. RESULTS: Through analysis, five major themes regarding the use of coerced treatment were constructed: (1) as protection for people from the dangers related to the use of alcohol and other drugs; (2) as punishment, aiming to prevent the return to drug use; (3) as a guarantee of abstinence; (4) as a consequence of the loss of autonomy to decide what was best for themselves; and (5) as time for the reorganization of the family members' lives. The lack of emotional support in relation to their concerns regarding the health and safety of the person using drugs, the prohibitionist discourse and the emphasis on abstinence shared in the decision to seek coerced treatment, and the lack of knowledge about voluntary treatments contributed to family members requesting coerced treatment more than once. CONCLUSION: This study highlights the importance of the need for public policies that expand evidence-based voluntary approaches, especially community-based services, and promote the disclosure of these services to eliminate coerced treatment. Health care providers should support the feelings of family members and provide guidelines related to other treatment options, making families feel genuinely included as partners in the care of people who use drugs.