Optimization and validation of a high-performance liquid chromatographic method with UV detection for the determination of ketoconazole in canine plasma.

An isocratic high-performance liquid chromatographic method with detection at 240 nm was developed, optimized and validated for the determination of ketoconazole in canine plasma. 9-Acetylanthracene was used as internal standard. A Hypersil BDS RP-C18 column (250 mm x 4.6 mm, 5 microm particle size), was equilibrated with a mobile phase composed of methanol, water and diethylamine 74:26:0.1 (v/v/v). Its flow rate was 1 ml/min. The elution time for ketoconazole and 9-acetylanthracene was approximately 9 and 8 min, respectively. Calibration curves of ketoconazole in plasma were linear in the concentration range of 0.015-10 microg/ml. Limits of detection and quantification in plasma were 5 and 15 ng/ml, respectively. Recovery was greater than 95%. Intra- and inter-day relative standard deviation for ketoconazole in plasma was less than 3.1 and 4.7%, respectively. This method was applied to the determination of ketoconazole plasma levels after administration of a commercially available tablet to dogs.

Sensitive and simple liquid chromatographic method with ultraviolet detection for the determination of nifedipine in canine plasma.

An isocratic high-performance liquid chromatographic method with detection at 240 nm was developed, optimized and validated for the determination of nifedipine in canine plasma. Liquid-liquid extraction was used as the sample preparation technique. Carbamazepine was used as internal standard. A Hypersil BDS RP-C18 column (250 mm x 4.6 mm, 5 microm) was equilibrated with a mobile phase composed of water and methanol, 45:55 (v/v). Its flow rate was 1 ml min(-1). The elution time for nifedipine and carbamazepine was approximately 12 and 8 min, respectively. Calibration curves of nifedipine in plasma were linear in the concentration range of 1-200 ng ml(-1). Limits of detection and quantification in plasma were 0.5 and 1.5 ng ml(-1), respectively. Recovery was greater than 98%. Intra- and inter-day relative standard deviation for nifedipine in plasma was less than 8.5 and 10%, respectively. This method was applied to the determination of nifedipine plasma levels after administration of commercially available soft gelatine capsules to dogs.

Optimized determination of lycopene in canine plasma using reversed-phase high-performance liquid chromatography.

An isocratic high-performance liquid chromatographic method with detection at 472 nm was developed, optimized and validated for the determination of lycopene in canine plasma. Ethyl-beta-apo-8'-carotenoate was used as internal standard. A Hypersil BDS RP-C18 column (150 mm x 4.6 mm), 5 microm particle size, was equilibrated with a mobile phase composed of acetonitrile and methanol (50:50, v/v). Its flow rate was 1.5 ml/min. The elution time for lycopene and ethyl-beta-apo-8'-carotenoate was approximately 11 and 5 min, respectively. Calibration curves of lycopene were linear in the concentration range of 3-200 ng/ml in plasma. Limits of detection and quantification in plasma were 1 and 4 ng/ml, respectively. Recovery was greater than 97%. Intra- and inter-day relative standard deviation for lycopene in plasma was less than 1.8 and 3.1%, respectively. This method was applied to the determination of lycopene plasma levels after single dose administration to dogs.

Development and optimization of a reversed-phase high-performance liquid chromatographic method for the determination of acetaminophen and its major metabolites in rabbit plasma and urine after a toxic dose.

A reversed-phase high-performance liquid chromatographic method with detection at 242 nm was developed, optimized and validated for the determination of acetaminophen (A) and its major metabolites glucuronide (AG) and sulfate (AS) conjugates in rabbit plasma and urine after a toxic dose. m-Aminophenol was used as internal standard (IS). A Hypersil BDS RP-C18 column (250 x 4.6 mm), 5 microm particle size, was equilibrated with a mobile phase composed of aqueous buffer solution of KH2PO4 0.05 M containing 1% CH3COOH (pH 6.5) and methanol (95:5, v/v). Its flow rate was 1.5 ml/min. Calibration curves of A, AG and AS were linear in the concentration ranges of 0.5-250, 1-200, 0.5-100 microg/ml in plasma and 1-200, 0.5-150, 0.5-100 microg/ml in urine matrix, respectively. Limits of detection and quantitation were calculated in all cases and extensive recovery studies were also performed. Intra-day relative standard deviation (R.S.D.) for A, AG and AS in plasma was less than 5, 4, 2% and in urine less than 4, 7, 4%, respectively, while the corresponding inter-day values were 7, 6, 4% and 5, 8, 6%, respectively.

Development and optimization of a reversed-phase high-performance liquid chromatographic method for the determination of piperacillin and tazobactam in tazocin injectable powder.

A reversed phase high-performance liquid chromatographic method with detection at 220 nm was developed and validated for the determination of piperacillin, I, and tazobactam, II, in Tazocin injectable powder. Acetaminophen was used as internal standard. A Hypersil BDS RP-C(18) column (250 x 4.6 mm), 5 microm particle size, was equilibrated with a mobile phase composed of aqueous solution of sodium dihydrogenphosphate-dihydrate (20 mM)-acetonitrile-methanol (70:15:15, v/v/v) and pH 5.0. Its flow rate was 1.0 ml/min. Calibration curves were linear for I and II in the concentration ranges of 3.0 x 10(-7)-2.0 x 10(-4) M and 7.0 x 10(-7)-2.0 x 10(-4) M, respectively. Limits of detection and quantitation were 1 x 10(-7), 3 x 10(-7) M for I and 2 x 10(-7), 7 x 10(-7) M for II, respectively. Relative standard deviation, for I and II was less than 0.40 and 0.75%, respectively. Extensive recovery studies were also performed.

Study on the inclusion complexes of bromazepam with beta- and beta-hydroxypropyl-cyclodextrins.

Solubility enhancement of the water insoluble bromazepam was studied during the formation of its inclusion complexes with beta-cyclodextrin (beta-CD) and beta-hydroxypropyl-cyclodextrin (beta-HP-CD). The phase solubility technique established by Higuchi and Connors and UV-spectrophotometric methods (zero- and second-order derivative approaches) were used to measure the changes introduced in this chemical system. The amount of time, which was necessary to reach equilibrium between inclusion complexes and their free components, was estimated and found equal to 24 h. The study was carried out at (i) pH 7.0 and 25 degrees C and (ii) pH 7.4 and 37 degrees C. The solubility of bromazepam increased linearly as a function of concentration for both beta-and beta-hydroxypropyl-cyclodextrins. Thus, the phase solubility diagrams were classified as of A(L) type in all cases. Under the above-mentioned conditions, the formation constants of the inclusion complexes were calculated and their stoichiometry was evaluated, found in the range of 69-85 M(-1) and 1:1, respectively.

Development and validation of a reversed-phase high-performance liquid chromatographic method for the determination of ethyl-3-(N-n-butyl-N-acetyl)aminopropionate in an insect repellent semi-solid formulation.

A reversed-phase high-performance liquid chromatographic method with detection at 220 nm was developed and validated for the determination of ethyl-3-(N-n-butyl-N-acetyl)aminopropionate, IR 3535, in an insect repellent semi-solid product. A Hypersil ODS RP-C18 column (250 x 4.6 mm), 5 microm particle size, was equilibrated with a mobile phase consisted of water-acetonitrile (60:40, v/v). Its flow-rate was 1.0 ml/min. Excipients did not interfere with the determination of IR 3535 (Rs = 8.663). Intra- and inter-day relative standard deviations for samples were not higher than 0.61 and 1.2%, respectively. Mean recovery was found not lower than 98.5% and not higher than 100.3%. The method of external standard was adopted. Calibration curves were linear in the concentration range between 1.0 x 10(-6) and 5.0 x 10(-4) M. Limits of detection and quantitation were 65 and 196 ng/ml, respectively.

Kinetic study on the acidic hydrolysis of lorazepam by a zero-crossing first-order derivative UV-spectrophotometric technique.

A zero-crossing first-order derivative UV-spectrophotometric technique for monitoring the main degradation product, 6-chloro-4-(2-chlorophenyl)-2-quinazoline carboxaldehyde, was developed to study the acidic hydrolysis of lorazepam in hydrochloric acid solutions of 0.1 M. Due to the complete overlap of the spectral bands of the parent drug and the hydrolysis product (the range between their spectral maxima was only 3 nm), the graphical methods of derivative spectrophotometry were not efficient. The relative standard deviation of the proposed technique was less than 2.4% and the detection limit was 6.6x10(-8) M. Accelerated studies at higher temperatures have been employed that enable rapid prediction of the long-term stability of this drug. Pseudo-first order reaction kinetics was observed. Kinetic parameters, k(obs) and t(1/2), were calculated, which were similar to those estimated by an HPLC method developed in our laboratory.

Kinetic study on the degradation of prazepam in acidic aqueous solutions by high-performance liquid chromatography and fourth-order derivative ultraviolet spectrophotometry.

A reversed-phase HPLC method was developed for the kinetic investigation of the acidic hydrolysis of prazepam which was carried out in hydrochloric acid solutions of 0.01, 0.1 and 1.0 M. In addition, a fourth-order derivative method for monitoring the parent compound itself was proposed and evaluated. One intermediate was observed by HPLC, which should be formed from breakage of the azomethine linkage. Further slow hydrolysis of the amide bond led to the benzophenone product that was isolated and identified. The mechanism of hydrolysis was biphasic, showing a consecutive reaction with a reversible step. Relative standard deviation was less than 2% for HPLC and less than 5% for the derivative method. Detection limits were 1.2 x 10(-7) M for the former method and 6.7 x 10(-7)M for the latter. Accelerated studies at higher temperatures were employed. Results of HPLC and fourth-order derivative methods were statistically the same.