Structure, Properties and Applications of Two-Dimensional Hexagonal Boron Nitride.

Hexagonal boron nitride (h-BN) has emerged as a strong candidate for two-dimensional (2D) material owing to its exciting optoelectrical properties combined with mechanical robustness, thermal stability, and chemical inertness. Super-thin h-BN layers have gained significant attention from the scientific community for many applications, including nanoelectronics, photonics, biomedical, anti-corrosion, and catalysis, among others. This review provides a systematic elaboration of the structural, electrical, mechanical, optical, and thermal properties of h-BN followed by a comprehensive account of state-of-the-art synthesis strategies for 2D h-BN, including chemical exfoliation, chemical, and physical vapor deposition, and other methods that have been successfully developed in recent years. It further elaborates a wide variety of processing routes developed for doping, substitution, functionalization, and combination with other materials to form heterostructures. Based on the extraordinary properties and thermal-mechanical-chemical stability of 2D h-BN, various potential applications of these structures are described.

Carbon Nanotubes and Related Nanomaterials: Critical Advances and Challenges for Synthesis toward Mainstream Commercial Applications.

Advances in the synthesis and scalable manufacturing of single-walled carbon nanotubes (SWCNTs) remain critical to realizing many important commercial applications. Here we review recent breakthroughs in the synthesis of SWCNTs and highlight key ongoing research areas and challenges. A few key applications that capitalize on the properties of SWCNTs are also reviewed with respect to the recent synthesis breakthroughs and ways in which synthesis science can enable advances in these applications. While the primary focus of this review is on the science framework of SWCNT growth, we draw connections to mechanisms underlying the synthesis of other 1D and 2D materials such as boron nitride nanotubes and graphene.

Extraction of Boron Nitride Nanotubes and Fabrication of Macroscopic Articles Using Chlorosulfonic Acid.

Due to recent advances in high-throughput synthesis, research on boron nitride nanotubes (BNNTs) is moving toward applications. One future goal is the assembly of macroscopic articles of high-aspect-ratio, pristine BNNTs. However, these articles are presently unattainable because of insufficient purification and fabrication methods. We introduce a solution process for extracting BNNTs from synthesis impurities without sonication or the use of surfactants and proceed to convert the extracted BNNTs into thin films. The solution process can also be used to convert as-synthesized material-which contains significant amounts of hexagonal boron nitride ( h-BN)-into mats and aerogels with controllable structure and dimension. The solution extraction method, combined with further advances in synthesis and purification, contributes to the development of all-BNNT macroscopic articles, such as fibers and 3-D structures.

Transition from direct to Fowler-Nordheim tunneling in chemically reduced graphene oxide film.

We investigate charge transport in a chemically reduced graphene oxide (RGO) film of sub-micron thickness. The I-V curve of RGO film shows current switching of the order of ∼10(5) above the threshold voltage. We found that the observed I-V curve is consistent with quantum tunnelling based charge transport. The quantum tunnelling based Simmons generalized theory was used to interpret the charge transport mechanism which shows that the current switching phenomenon is associated with transition from direct to Fowler-Nordheim (F-N) tunneling. The absence of current switching in the I-V curve after stripping away the oxygen functional groups from chemically RGO film confirms that the presence of these groups and reduced interaction between adjacent layers of RGO play a key role in charge transport. Such metal-based current switching devices may find applications in graphene-based electronic devices such as high voltage resistive switching devices.

Enhancement of the electron spin resonance of single-walled carbon nanotubes by oxygen removal.

We have observed a nearly 4-fold increase in the electron spin resonance (ESR) signal from an ensemble of single-walled carbon nanotubes (SWCNTs) due to oxygen desorption. By performing temperature-dependent ESR spectroscopy both before and after thermal annealing, we found that the ESR in SWCNTs can be reversibly altered via the molecular oxygen content in the samples. Independent of the presence of adsorbed oxygen, a Curie law (spin susceptibility ∝ 1/T) is seen from ~4 to 300 K, indicating that the probed spins are finite-level species. For both the pre-annealed and post-annealed sample conditions, the ESR line width decreased as the temperature was increased, a phenomenon we identify as motional narrowing. From the temperature dependence of the line width, we extracted an estimate of the intertube hopping energy; for both sample conditions, we found this hopping energy to be ~1.2 meV. Since the spin hopping energy changes only slightly when oxygen is desorbed, we conclude that only the spin susceptibility, not spin transport, is affected by the presence of physisorbed molecular oxygen in SWCNT ensembles. Surprisingly, no line width change is observed when the amount of oxygen in the SWCNT sample is altered, contrary to other carbonaceous systems and certain 1D conducting polymers. We hypothesize that physisorbed molecular oxygen acts as an acceptor (p-type), compensating the donor-like (n-type) defects that are responsible for the ESR signal in bulk SWCNTs.

Unique origin of colors of armchair carbon nanotubes.

The colors of suspended metallic colloidal particles are determined by their size-dependent plasma resonance, while those of semiconducting colloidal particles are determined by their size-dependent band gap. Here, we present a novel case for armchair carbon nanotubes, suspended in aqueous medium, for which the color depends on their size-dependent excitonic resonance, even though the individual particles are metallic. We observe distinct colors of a series of armchair-enriched nanotube suspensions, highlighting the unique coloration mechanism of these one-dimensional metals.

Efficient spectrofluorimetric analysis of single-walled carbon nanotube samples.

A new method and instrumentation are described for rapid compositional analysis of single-walled carbon nanotube (SWCNT) samples. The customized optical system uses multiple fixed-wavelength lasers to excite NIR fluorescence from SWCNTs individualized in aqueous suspensions. The emission spectra are efficiently captured by a NIR spectrometer with InGaAs multichannel detector and then analyzed by a computer program that consults a database of SWCNT spectral parameters. The identities and relative abundances of semiconducting SWCNTs species are quickly deduced and displayed in graphs and tables. Results are found to be consistent with those based on manual interpretation of full excitation-emission scans from a conventional spectrofluorometer. The new instrument also measures absorption spectra using a broadband lamp and multichannel spectrometers, allowing samples to be automatically characterized by their emission efficiencies. The system provides rapid data acquisition and is sensitive enough to detect the fluorescence of a few picograms of SWCNTs in ~50 µL sample volumes.

Effect of vaporization temperature on the diameter and chiral angle distributions of single-walled carbon nanotubes.

Pulsed laser vaporization synthesis of single-wall carbon nanotubes on Co/Ni and Rh/Pd catalysts was explored with respect to variations in the production temperature. The nanotube type populations were determined via photoluminescence, UV-Vis-NIR absorption and Raman spectroscopy. It was found that lowered production temperature leads to smaller nanotube diameters and exceptionally narrow (n, m) type distributions, with marked preference towards large chiral angles for both catalysts. Interestingly, larger nanotube diameters tend to be associated with larger chiral angles. These results demonstrate that PLV production technique can provide at least partial control over the nanotube (n, m) populations. In addition, these results have implications for the understanding the nanotube nucleation mechanism in the laser oven. SWCNT synthesized at lower temperatures appear quite attractive as a starting material for nanotube type separation experiments.

Enhanced electric double layer capacitance of graphite oxide intercalated by poly(sodium 4-styrensulfonate) with high cycle stability.

We propose a new material for high power and high density supercapacitors with excellent cycle stability. Graphite oxide (PSS-GO) intercalated with poly(sodium 4-styrensulfonate) showed high performance of electric double layer capacitance (EDLC) compared to that of the pristine graphite oxide. Specific capacitance of the PSS-GO reached 190 F/g, and the energy density was much improved to 38 Wh/kg with a power density of 61 W/kg. Cycle test showed that the specific capacitance decreased by only 12% after 14860 cycles, providing excellent cyclic stability. The high EDLC performance of PSS-GO composite was attributed to the wide interlayer distance and simple pore structures accommodating fast ion kinetics.

Strain measurements on individual single-walled carbon nanotubes in a polymer host: structure-dependent spectral shifts and load transfer.

The fluorescence spectra of individual semiconducting single-walled carbon nanotubes embedded in polymer films were measured during the application of controlled stretching and compressive strains. Nanotube band gaps were found to shift in systematic patterns that depend on the (n,m) structural type and are in excellent agreement with the predictions of theoretical models. Loss of nanotube-host adhesion was revealed by abrupt irregularities in plots of spectral shift vs strain.

Single-walled carbon nanotubes: geno- and cytotoxic effects in lung fibroblast V79 cells.

With the development of nanotechnology, there is a tremendous growth of the application of nanomaterials, which increases the risk of human exposure to these nanomaterials through inhalation, ingestion, and dermal penetration. Among different types of nanoparticles, single-walled carbon nanotubes (SWCNT) with extremely small size (1 nm in diameter) exhibit extraordinary properties and offer possibilities to create materials with astounding features. Since the release of nanoparticles in an enclosed environment is of great concern, a study of possible genotoxic effects is important. Our previous data showed that pharyngeal aspiration of SWCNT elicited pulmonary effects in C57BL/6 mice that was promoted by a robust, acute inflammatory reaction with early onset resulting in progressive interstitial fibrogenic response and the formation of granulomas. In the present study, the genotoxic potential of SWCNT was evaluated in vitro. The genotoxic effects of nanoparticles were examined using three different test systems: the comet assay and micronucleus (MN) test in a lung fibroblast (V79) cell line, and the Salmonella gene mutation assay in strains YG1024/YG1029. Cytotoxicity tests showed loss of viability in a concentration- and time-dependent manner after exposure of cells to SWCNT. Results from the comet assay demonstrated the induction of DNA damage after only 3 h of incubation with 96 microg/cm2 of SWCNT. The MN test indicated some but not significant micronucleus induction by SWCNT in the V79 cell line at the highest concentrations tested. With two different strains of Salmonella typhimurium, no mutations were found following SWCNT exposure.

Vitamin E deficiency enhances pulmonary inflammatory response and oxidative stress induced by single-walled carbon nanotubes in C57BL/6 mice.

Exposure of mice to single-walled carbon nanotubes (SWCNTs) induces an unusually robust pulmonary inflammatory response with an early onset of fibrosis, which is accompanied by oxidative stress and antioxidant depletion. The role of specific components of the antioxidant protective system, specifically vitamin E, the major lipid-soluble antioxidant, in the SWCNT-induced reactions has not been characterized. We used C57BL/6 mice, maintained on vitamin E-sufficient or vitamin E-deficient diets, to explore and compare the pulmonary inflammatory reactions to aspired SWCNTs. The vitamin E-deficient diet caused a 90-fold depletion of alpha-tocopherol in the lung tissue and resulted in a significant decline of other antioxidants (GSH, ascorbate) as well as accumulation of lipid peroxidation products. A greater decrease of pulmonary antioxidants was detected in SWCNT-treated vitamin E-deficient mice as compared to controls. Lowered levels of antioxidants in vitamin E-deficient mice were associated with a higher sensitivity to SWCNT-induced acute inflammation (total number of inflammatory cells, number of polymorphonuclear leukocytes, released LDH, total protein content and levels of pro-inflammatory cytokines, TNF-alpha and IL-6) and enhanced profibrotic responses (elevation of TGF-beta and collagen deposition). Exposure to SWCNTs markedly shifted the ratio of cleaved to full-length extracellular superoxide dismutase (EC-SOD). Given that pulmonary levels of vitamin E can be manipulated through diet, its effects on SWCNT-induced inflammation may be of practical importance in optimizing protective strategies.

A review of carbon nanotube toxicity and assessment of potential occupational and environmental health risks.

Nanotechnology has emerged at the forefront of science research and technology development. Carbon nanotubes (CNTs) are major building blocks of this new technology. They possess unique electrical, mechanical, and thermal properties, with potential wide applications in the electronics, computer, aerospace, and other industries. CNTs exist in two forms, single-wall (SWCNTs) and multi-wall (MWCNTs). They are manufactured predominately by electrical arc discharge, laser ablation and chemical vapor deposition processes; these processes involve thermally stripping carbon atoms off from carbon-bearing compounds. SWCNT formation requires catalytic metals. There has been a great concern that if CNTs, which are very light, enter the working environment as suspended particulate matter (PM) of respirable sizes, they could pose an occupational inhalation exposure hazard. Very recently, MWCNTs and other carbonaceous nanoparticles in fine (<2.5 microm) PM aggregates have been found in combustion streams of methane, propane, and natural-gas flames of typical stoves; indoor and outdoor fine PM samples were reported to contain significant fractions of MWCNTs. Here we review several rodent studies in which test dusts were administered intratracheally or intrapharyngeally to assess the pulmonary toxicity of manufactured CNTs, and a few in vitro studies to assess biomarkers of toxicity released in CNT-treated skin cell cultures. The results of the rodent studies collectively showed that regardless of the process by which CNTs were synthesized and the types and amounts of metals they contained, CNTs were capable of producing inflammation, epithelioid granulomas (microscopic nodules), fibrosis, and biochemical/toxicological changes in the lungs. Comparative toxicity studies in which mice were given equal weights of test materials showed that SWCNTs were more toxic than quartz, which is considered a serious occupational health hazard if it is chronically inhaled; ultrafine carbon black was shown to produce minimal lung responses. The differences in opinions of the investigators about the potential hazards of exposures to CNTs are discussed here. Presented here are also the possible mechanisms of CNT pathogenesis in the lung and the impact of residual metals and other impurities on the toxicological manifestations. The toxicological hazard assessment of potential human exposures to airborne CNTs and occupational exposure limits for these novel compounds are discussed in detail. Environmental fine PM is known to form mainly from combustion of fuels, and has been reported to be a major contributor to the induction of cardiopulmonary diseases by pollutants. Given that manufactured SWCNTs and MWCNTs were found to elicit pathological changes in the lungs, and SWCNTs (administered to the lungs of mice) were further shown to produce respiratory function impairments, retard bacterial clearance after bacterial inoculation, damage the mitochondrial DNA in aorta, increase the percent of aortic plaque, and induce atherosclerotic lesions in the brachiocephalic artery of the heart, it is speculated that exposure to combustion-generated MWCNTs in fine PM may play a significant role in air pollution-related cardiopulmonary diseases. Therefore, CNTs from manufactured and combustion sources in the environment could have adverse effects on human health.

A model for nucleation and growth of single wall carbon nanotubes via the HiPcO process: a catalyst concentration study.

Using the High Pressure carbon monoxide (HiPco) reactor we conducted an experiment on the effects of changing the catalyst concentration. With each catalyst concentration tested the resulting raw HiPco material was characterized for average SWNT lengths, SWNT diameters, residual iron particle size, and large fullerene content. We were able to determine trends in each of these characteristics as the catalyst concentration was changed. As the catalyst concentration was decreased SWNT lengths increased, SWNT diameters increased, the residual iron particle size increased, and the large fullerene content decreased. From these trends we have developed a Competitive Growth model for nucleation and growth of SWNTs via the HiPco process.

Continued growth of single-walled carbon nanotubes.

We demonstrate the continued growth of single-walled carbon nanotubes (SWNTs) from ordered arrays of open-ended SWNTs in a way analogous to epitaxy. Nanometer-sized metal catalysts were docked to the SWNT open ends and subsequently activated to restart growth. SWNTs thus grown inherit the diameters and chirality from the seeded SWNTs, as indicated by the closely matched frequencies of Raman radial breathing modes before and after the growth.

Functionalization and extraction of large fullerenes and carbon-coated metal formed during the synthesis of single wall carbon nanotubes by laser oven, direct current arc, and high-pressure carbon monoxide production methods.

Large fullerenes and carbon-coated metal nanoparticles that are formed during the synthesis of carbon nanotubes have been functionalized by the addition of alkyl radicals and isolated by extraction into chloroform. The soluble, functionalized fullerenes have been isolated from raw single-wall carbon nanotube (SWNT) material prepared by laser oven, direct current arc, and high-pressure carbon monoxide production methods. Analyses of the extracted large fullerenes were carried out by thermogravimetric analysis, UV-vis-near-IR, laser desorption ionization mass spectrometry, and high-resolution transmission electron microscopy.

A parametric study of single-wall carbon nanotube growth by laser ablation.

Results of a parametric study of carbon nanotube production by the double-pulse laser oven process are presented. The effect of various operating parameters on the production of single-wall carbon nanotubes (SWCNTs) is estimated by characterizing the nanotube material using analytical techniques, including scanning electron microscopy, transmission electron microscopy, thermo gravimetric analysis and Raman spectroscopy. The study included changing the sequence of the laser pulses, laser energy, pulse separation, type of buffer gas used, operating pressure, flow rate, inner tube diameter, as well as its material, and oven temperature. It was found that the material quality and quantity improve with deviation from normal operation parameters such as laser energy density higher than 1.5 J/cm2, pressure lower than 67 kPa, and flow rates higher than 100 sccm. Use of helium produced mainly small diameter tubes and a lower yield. The diameter of SWCNTs decreases with decreasing oven temperature and lower flow rates.

Laser ablation process for single-walled carbon nanotube production.

Different types of lasers are now routinely used to prepare single-walled carbon nanotubes. The original method developed by researchers at Rice University used a "double-pulse laser oven" process. Several researchers have used variations of the lasers to include one-laser pulse (green or infrared), different pulse widths (ns to micros as well as continuous wave), and different laser wavelengths (e.g., CO2, or free electron lasers in the near to far infrared). Some of these variations are tried with different combinations and concentrations of metal catalysts, buffer gases (e.g., helium), oven temperatures, flow conditions, and even different porosities of the graphite targets. This article is an attempt to cover all these variations and their relative merits. Possible growth mechanisms under these different conditions will also be discussed.