Novel and Integrated Process for the Valorization of Kraft Lignin to Produce Lignin-Containing Vitrimers.

The valorization of lignin into value-added products by oxidative conversion is a widely studied strategy. However, in many cases, this approach has limited scope for integration into industrial processes. The objective of our work is to maximize overall lignin utilization to produce diverse value-added products with a focus on integration in the existing industrial pulp and paper processes. The utilization of the sequential oxidation strategy using oxygen and ozone resulted in kraft lignin with a marked improvement in carboxyl content and also allowed the formation of vanillin and vanillic acid in the oxygen stage. The sequentially oxidized lignin (OxL-COOH) was then cured with poly(ethylene glycol) diglycidyl ether (PEG-epoxy) to form high-lignin-content (>48 wt %) vitrimers with high thermal stability, fast relaxation, swelling, and self-healing due to the presence of bond-exchangeable cross-linked networks. Overall, this study provides a novel approach for the multidimensional valorization of lignin and demonstrates an integrated approach for kraft lignin valorization in the pulp and paper industry.

Quantitative 31P NMR Analysis of Lignins and Tannins.

The development of sustainable biorefinery products is confronted, among others, with the challenge of lignin and tannin valorization. These abundant, renewable aromatic biopolymers have not been widely exploited due to their inherent structural complexity and high degrees of variability and species diversity. The lack of a defined primary structure for these polyphenols is further compounded with complex chemical alterations induced during processing, eventually imparting a large variety of structural features of extreme significance for any further utilization efforts. Consequently, a protocol for the rapid, simple, and unequivocal identification and quantification of the various functional groups present in natural polyphenols, is a fundamental prerequisite for understanding and accordingly tailor their reactivity and eventual utility. Quantitative 31P NMR offers the opportunity to rapidly and reliably identify unsubstituted, o-mono substituted, and o-disubstituted phenols, aliphatic OHs, and carboxylic acid moieties in lignins and tannins with broad application potential. The methodology consists of an in situ quantitative lignin or tannin labeling procedure using a suitable 31P containing probe, followed by the acquisition of a quantitative 31P NMR spectrum in the presence of an internal standard. The high natural abundance of the 31P nucleus allows for small amounts of the sample (~30 mg) and short NMR acquisition times (~30-120 min) with well-resolved 31P signals that are highly dependent on the surrounding chemical environment of the labeled OH groups.

3D Photoinduced Spatiotemporal Resolution of Cellulose-Based Hydrogels for Fabrication of Biomedical Devices.

Rational spatiotemporal irradiation of cellulose-based hydrogels (carboxymethylcellulose (CMC), citric acid, and riboflavin) using a laser diode stereolithography 3D printer obtained architectures referred to as photodegradation addressable hydrogels (PAHs). Under irradiation, these PAHs engage in an unprecedented spatially resolved zonal swelling illustrating marked but controllable changes in swelling and thickness while concomitantly obtaining improved oxygen transmission rate values by 5 times. XPS, carboxyl content, and swelling data comparisons of hydrogel formulations show that photodegradation and ablation of the material occur, where hydroxyl sites of CMC are converted to aldehydes and ketones. XRD data show that the total number of crystalline aggregates in the material are lowered after photoablation. The spatially tuned (photoablated) hydrogel films can thus be shaped into a lens form. The energy required for the lens tuning process can be lowered up to 30 times by incorporation of riboflavin in the films. The method demonstrated here enables the processing of a material that is difficult to be machined or cast by popular contact lens making methods.

Determination of hydroxyl groups in biorefinery resources via quantitative 31P NMR spectroscopy.

The analysis of chemical structural characteristics of biorefinery product streams (such as lignin and tannin) has advanced substantially over the past decade, with traditional wet-chemical techniques being replaced or supplemented by NMR methodologies. Quantitative 31P NMR spectroscopy is a promising technique for the analysis of hydroxyl groups because of its unique characterization capability and broad potential applicability across the biorefinery research community. This protocol describes procedures for (i) the preparation/solubilization of lignin and tannin, (ii) the phosphitylation of their hydroxyl groups, (iii) NMR acquisition details, and (iv) the ensuing data analyses and means to precisely calculate the content of the different types of hydroxyl groups. Compared with traditional wet-chemical techniques, the technique of quantitative 31P NMR spectroscopy offers unique advantages in measuring hydroxyl groups in a single spectrum with high signal resolution. The method provides complete quantitative information about the hydroxyl groups with small amounts of sample (~30 mg) within a relatively short experimental time (~30-120 min).

Synthesis and characterization of nano fibrillated cellulose/Cu2O films; micro and nano particle nucleation effects.

Cubic, truncated cubic and spherical nano and micro particles of Cu2O, can be selectively deposited onto nano fibrilated cellulose gels by the modulated alkaline reduction of Cu2+ ions aided by the cellulose's reducing end groups. The role of the cellulose's reducing end groups and that of externally added carbohydrate reducing agents, towards inducing various Cu2O morphologies, is discussed with respect to the detailed nucleation effects leading to micro and nano Cu2O particle deposition on NFC. When the reducing end groups are provided only by the cellulose's chain ends, supersaturation effects seem to be affecting the Cu2O nucleation mechanism. However, the Cu2O nucleation considerations were altered when mobile reducing end groups were provided by adding dextrose in the system, promoting additional particle nucleation sites. Furthermore, the effort offered the possibility to quantitatively determine the number of accessible reducing end groups (-CHO) present in NFC, expressed in mmol/g. The optical properties of the created NFC/Cu2O films were examined by UV-vis absorption measurements, revealing band gaps ranging between 2.02-2.25 eV. The accumulated understanding expands the utility window and opens new directions for the novel utilization of nano-fibrillated cellulose, and more specifically toward semiconductor applications.

Ultrasound assisted polyacrylamide grafting on nano-fibrillated cellulose.

Polyacrylamide has been grafted onto nanofibrillated cellulose (NFC-g-PAM) under mild conditions. This was accomplished by developing and optimizing an ultrasound assisted protocol in the presence of potassium persulfate initiator. The synthesis was optimized on the basis of maximizing grafting percentage and grafting efficiency by varying the initiator and monomer concentration. The data shows that ultrasound has a profound effect in promoting the grafting of PAM onto NFC. The intended grafting was confirmed and the properties of the new co-polymers were examined by elemental analyses, Fourier transform infrared spectroscopy, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). Intrinsic viscosity determinations in 0.1M cupriethylenediamine solutions for the NFC-g-PAM copolymers and the starting NFC and PAM homopolymer revealed that grafting of PAM onto nanofibrillated cellulose has a profound effect on the hydrodynamic characteristics of the graft polymers.

Stable Organic Radicals in Lignin: A Review.

Lignin and the quest for the origin of stable organic radicals in it have seen numerous developments. Although there have been various speculations over the years on the formation of these stable radicals, researchers have not been able to arrive at a solid, unequivocal hypothesis that applies to all treatments and types of lignin. The extreme complexity of lignin and its highly aromatic, cross-linked, branched, and rigid structure has made such efforts rather cumbersome. Since the early 1950s, researchers in this field have dedicated their efforts to the establishment of methods for the detection and determination of spin content, theoretical simulations, and reactions on model compounds and spin-trapping studies. Although a significant amount of published research is available on lignin or its model compounds and the reactive intermediates involved during various chemical treatments (pulping, bleaching, extractions, chemical modifications, etc.), the literature provides a limited view on the origin, nature, and stability of such radicals. Consequently, this review is focused on examining the origin of such species in lignin, factors affecting their presence, reactions involved in their formation, and methods for their detection.

Ionic Liquid Character of Zinc Chloride Hydrates Define Solvent Characteristics that Afford the Solubility of Cellulose.

The recently described ionic liquid structure of the three equivalent hydrate of zinc chloride (ZnCl2·R H2O, R = 3, existing as [Zn(OH2)6][ZnCl4]) explains the solubility of cellulose in this medium. Only hydrate compositions in the narrow range of 3 - x < R < 3 + x with x ≈ 1 dissolve cellulose. Once dissolved, the cellulose remains in solution up to the R = 9 hydrate. Neutron diffraction and differential pair distribution function analysis of cellulose and model compound solutions (1 wt % cellulose in the R = 3 hydrate and 1 wt % ethanol in the R = 3 hydrate and the ZnCl2·3 ethanol liquid) coupled with detailed solubility measurements suggest that cellulose solubility occurs via coordination of the primary OH to the hydrated zinc cation with ring hydroxyls forming part of a second coordination shell around the cation of the ionic liquid.

Wood Extractives Promote Cellulase Activity on Cellulosic Substrates.

Deposition of hydrophobic wood extractives and representative model compounds, on the surface of cellulose prior to enzymatic hydrolysis was found to either enhance or inhibit the action of cellulase enzymes. The effect of these compounds was correlated with their chemical structure, which may in part explain the differential effects observed between softwood and hardwood extractives. Specifically, the addition of sterol, enhanced enzymatic hydrolysis of microcrystalline cellulose by 54%, whereas the addition of a triglyceride could inhibit the hydrolysis by 49%. The effects of the different extractives' could be explained by considering their Hansen solubility parameters. The amphiphilic and/or hydrophobic character of model extractives was found to be the variable that affected the deposition of extractives on cellulose surfaces and the eventual adsorption of cellulolytic enzymes on it. The observed beneficial effects of extractives are likely related to a reduction in the irreversible binding of the enzymes on the cellulose surface.

Synthesis, Characterization, and Antimicrobial Efficacy of Photomicrobicidal Cellulose Paper.

Toward our goal of scalable, antimicrobial materials based on photodynamic inactivation, paper sheets comprised of photosensitizer-conjugated cellulose fibers were prepared using porphyrin and BODIPY photosensitizers, and characterized by spectroscopic (infrared, UV-vis diffuse reflectance, inductively coupled plasma optical emission) and physical (gel permeation chromatography, elemental, and thermal gravimetric analyses) methods. Antibacterial efficacy was evaluated against Staphylococcus aureus (ATCC-2913), vancomycin-resistant Enterococcus faecium (ATCC-2320), Acinetobacter baumannii (ATCC-19606), Pseudomonas aeruginosa (ATCC-9027), and Klebsiella pneumoniae (ATCC-2146). Our best results were achieved with a cationic porphyrin-paper conjugate, Por((+))-paper, with inactivation upon illumination (30 min, 65 ± 5 mW/cm(2), 400-700 nm) of all bacterial strains studied by 99.99+% (4 log units), regardless of taxonomic classification. Por((+))-paper also inactivated dengue-1 virus (>99.995%), influenza A (∼ 99.5%), and human adenovirus-5 (∼ 99%). These results demonstrate the potential of cellulose materials to serve as scalable scaffolds for anti-infective or self-sterilizing materials against both bacteria and viruses when employing a photodynamic inactivation mode of action.

Determination of molecular weight distributions in native and pretreated wood.

The analysis of native wood components by size-exclusion chromatography (SEC) is challenging. Isolation, derivatization and solubilization of wood polymers is required prior to the analysis. The present approach allowed the determination of molecular weight distributions of the carbohydrates and of lignin in native and processed woods, without preparative component isolation steps. For the first time a component selective SEC analysis of sawdust preparations was made possible by the combination of two selective derivatization methods, namely; ionic liquid assisted benzoylation of the carbohydrate fraction and acetobromination of the lignin in acetic acid media. These were optimized for wood samples. The developed method was thus used to examine changes in softwood samples after degradative mechanical and/or chemical treatments, such as ball milling, steam explosion, green liquor pulping, and chemical oxidation with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ). The methodology can also be applied to examine changes in molecular weight and lignin-carbohydrate linkages that occur during wood-based biorefinery operations, such as pretreatments, and enzymatic saccharification.

Quantitative 31P NMR analysis of solid wood offers an insight into the acetylation of its components.

As a solid substrate, wood and its components are almost invariably examined via spectroscopic or indirect methods of analysis. Unlike earlier approaches, in this effort we dissolve pulverized wood in ionic liquid and then directly derive its functional group contents by quantitative (31)P NMR. As such, this novel analytical methodology is thoroughly examined and an insight into the detailed way acetylation proceeds on solid wood and its components is provided as a function of wood density and within its various anatomical features. As anticipated, the efficiency of acetylation was found to be greater within low density wood than in high density wood. The lignin, the cellulose and the hemicelluloses of the low density wood was found to be acetylated nearly twice as fast with remarkable differences in their quantitative degree of acetylation amongst them. This direct analytical data validates the applied methodology and confirms, for the first time, that the order of acetylation in solid wood is lignin>hemicellulose>cellulose and no reactivity differences exist between early wood and late wood.

Kraft lignin chain extension chemistry via propargylation, oxidative coupling, and Claisen rearrangement.

Despite its aromatic and polymeric nature, the heterogeneous, stochastic, and reactive characteristics of softwood kraft lignin seriously limit its potential for thermoplastic applications. Our continuing efforts toward creating thermoplastic lignin polymers are now focused at exploring propargylation derivatization chemistry and its potential as a versatile novel route for the eventual utilization of technical lignins with a significant amount of molecular control. To do this, we initially report the systematic propargylation of softwood kraft lignin. The synthesized derivatives were extensively characterized with thermal methods (DSC, TGA), (1)H, (13)C, and quantitative (31)P NMR and IR spectroscopies. Further on, we explore the versatile nature of the lignin pendant propargyl groups by demonstrating two distinct chain extension chemistries; the solution-based, copper-mediated, oxidative coupling and the thermally induced, solid-state, Claissen rearrangement polymerization chemistries. Overall, we show that it is possible to modulate the reactivity of softwood kraft lignin via a combination of methylation and chain extension providing a rational means for the creation of higher molecular weight polymers with the potential for thermoplastic materials and carbon fibers with the desired control of structure-property relations.

Efficient one-pot synthesis of 5-chloromethylfurfural (CMF) from carbohydrates in mild biphasic systems.

5-Halomethylfurfurals can be considered as platform chemicals of high reactivity making them useful for the preparation of a variety of important compounds. In this study, a one-pot route for the conversion of carbohydrates into 5-chloromethylfurfural (CMF) in a simple and efficient (HCl-H3PO4/CHCl3) biphasic system has been investigated. Monosaccharides such as D-fructose, D-glucose and sorbose, disaccharides such as sucrose and cellobiose and polysaccharides such as cellulose were successfully converted into CMF in satisfactory yields under mild conditions. Our data shows that when using D-fructose the optimum yield of CMF was about 47%. This understanding allowed us to extent our work to biomaterials, such as wood powder and wood pulps with yields of CMF obtained being comparable to those seen with some of the enumerated mono and disaccharides. Overall, the proposed (HCl-H3PO4/CHCl3) optimized biphasic system provides a simple, mild, and cost-effective means to prepare CMF from renewable resources.

Accurate and reproducible determination of lignin molar mass by acetobromination.

The accurate and reproducible determination of lignin molar mass by using size exclusion chromatography (SEC) is challenging. The lignin association effects, known to dominate underivatized lignins, have been thoroughly addressed by reaction with acetyl bromide in an excess of glacial acetic acid. The combination of a concerted acetylation with the introduction of bromine within the lignin alkyl side chains is thought to be responsible for the observed excellent solubilization characteristics acetobromination imparts to a variety of lignin samples. The proposed methodology was compared and contrasted to traditional lignin derivatization methods. In addition, side reactions that could possibly be induced under the acetobromination conditions were explored with native softwood (milled wood lignin, MWL) and technical (kraft) lignin. These efforts lend support toward the use of room temperature acetobromination being a facile, effective, and universal lignin derivatization medium proposed to be employed prior to SEC measurements.

Porphyrin-cellulose nanocrystals: a photobactericidal material that exhibits broad spectrum antimicrobial activity.

Towards our overall objectives of developing potent antimicrobial materials to combat the escalating threat to human health posed by the transmission of surface-adhering pathogenic bacteria, we have investigated the photobactericidal activity of cellulose nanocrystals that have been modified with a porphyrin-derived photosensitizer (PS). The ability of these previously synthesized porphyrin-cellulose-nanocrystals (CNC-Por (1)) to mediate bacterial photodynamic inactivation was investigated as a function of bacterial strain, incubation time and illumination time. Despite forming an insoluble suspension, CNC-Por (1) showed excellent efficacy toward the photodynamic inactivation of Acinetobacter baumannii, multidrug-resistant Acinetobacter baumannii (MDRAB) and methicillin-resistant Staphylococcus aureus (MRSA), with the best results achieving 5-6 log units reduction in colony forming units (CFUs) upon illumination with visible light (400-700 nm; 118 J cm(-2)). CNC-Por (1) mediated the inactivation of Pseudomonas aeruginosa, although at reduced activity (2-3 log units reduction). Confocal laser scanning microscopy of CNC-Por (1) after incubation with A. baumannii or S. aureus suggested a lack of internalization of the PS. Research into alternative materials such as CNC-Por (1) may lead to their application in hospitals and healthcare-related industries wherein novel materials with the capability of reducing the rates of transmission of a wide range of bacteria, particularly antibiotic resistant strains, are desired.

Photobactericidal porphyrin-cellulose nanocrystals: synthesis, characterization, and antimicrobial properties.

Adherence and survival of pathogenic bacteria on surfaces leading to concomitant transmission to new hosts significantly contributes to the proliferation of pathogens, which in turn considerably increases the threat to human health, particularly by antibiotic-resistant bacteria. Consequently, more research into effective surface disinfection and alternative materials (fabrics, plastics, or coatings) with antimicrobial and other bioactive characteristics is desirable. This report describes the synthesis and characterization of cellulose nanocrystals that were surface-modified with a cationic porphyrin. The porphyrin was appended onto the cellulose surface via the Cu(I)-catalyzed Huisgen-Meldal-Sharpless 1,3-dipolar cycloaddition having occurred between azide groups on the cellulosic surface and porphyrinic alkynes. The resulting, generally insoluble, crystalline material, CNC-Por (5), was characterized by infrared and diffusion (1)H NMR spectroscopies, gel permeation chromatography, and thermogravimetric analysis. Although only suspended, and not dissolved, in an aqueous system, CNC-Por (5) showed excellent efficacy toward the photodynamic inactivation of Mycobacterium smegmatis and Staphylococcus aureus , albeit only slight activity against Escherichia coli . The synthesis, properties, and activity of CNC-Por (5) described herein serve as a benchmark toward our overall objectives of developing novel, potent, bioactive, photobactericidal materials that are effective against a range of bacteria, with potential utilization in the health care and food preparation industries.

Understanding the radical mechanism of lipoxygenases using 31P NMR spin trapping.

In this paper, we use our quantitative (31)P NMR spin trapping methods, already developed for simple oxygen- and carbon-centered radicals, to understand the radical intermediates generated by enzymatic systems and more specifically lipoxygenases. Our methodology rests on the fact that free radicals react with the nitroxide phosphorus compound, 5-diisopropoxy-phosphoryl-5-methyl-1-pyrroline-N-oxide (DIPPMPO), to form stable radical adducts, which are suitably detected and accurately quantified using (31)P NMR in the presence of a phosphorus containing internal standard. This system was thus applied to better understand the mechanism of enzymatic oxidation of linoleic acid by soybean lipoxygenases-1 (LOX). The total amount of radicals trapped by DIPPMPO was detected by (31)P NMR at different experimental conditions. In particular the effect of dioxygen concentration on the amount of radicals being trapped was studied. At low dioxygen concentration, a huge increase of radicals trapped was observed with respect to the amount of radicals being trapped at normal dioxygen concentrations.

Molecular weight distributions and linkages in lignocellulosic materials derivatized from ionic liquid media.

A novel and reproducible method is described for accurately determining the molecular weight distribution by size exclusion chromatography (SEC) of whole lignocellulosic materials. This approach offers the opportunity to compare the molecular weight distributions of intact milled woods and its component fractions, lignins and holocelluloses, all from the same source, thus highlighting the potential of the technique and the contributions of the individual components to the chromatogram. The method is based on the dissolution of the ball-milled samples in the ionic liquid 1-allyl-3-methylimidazolium chloride ([amim]Cl). Under these homogeneous ionic liquid media, a derivatization reaction was performed with benzoyl chloride in the presence of pyridine. The thoroughly benzoylated wood with its associated carbohydrate and lignin components was found to be completely soluble in the THF SEC eluent with marked UV detector sensitivity. This methodology, when applied to the individually isolated holocellulose and lignin (enzymatic mild acidolysis lignin; EMAL) materials from Norway spruce ( Eucalyptus grandis ) wood and corn stover, offered a better understanding as to the possible ways the lignin and the carbohydrates may interact within these three different species. Finally, the applicability of the methodology is shown for a series of pure cellulosic samples under intense mechanical defibration conditions, offering a visualization of the molecular weight distribution changes induced during the production of nanofibrillated cellulose.