Bio-Functionalized Ultra-Thin, Large-Area and Waterproof Silicone Membranes for Biomechanical Cellular Loading and Compliance Experiments.

Biocompatibility, flexibility and durability make polydimethylsiloxane (PDMS) membranes top candidates in biomedical applications. CellDrum technology uses large area, <10 µm thin membranes as mechanical stress sensors of thin cell layers. For this to be successful, the properties (thickness, temperature, dust, wrinkles, etc.) must be precisely controlled. The following parameters of membrane fabrication by means of the Floating-on-Water (FoW) method were investigated: (1) PDMS volume, (2) ambient temperature, (3) membrane deflection and (4) membrane mechanical compliance. Significant differences were found between all PDMS volumes and thicknesses tested (p < 0.01). They also differed from the calculated values. At room temperatures between 22 and 26 °C, significant differences in average thickness values were found, as well as a continuous decrease in thicknesses within a 4 °C temperature elevation. No correlation was found between the membrane thickness groups (between 3−4 µm) in terms of deflection and compliance. We successfully present a fabrication method for thin bio-functionalized membranes in conjunction with a four-step quality management system. The results highlight the importance of tight regulation of production parameters through quality control. The use of membranes described here could also become the basis for material testing on thin, viscous layers such as polymers, dyes and adhesives, which goes far beyond biological applications.

Recombinant Activated Protein C (rhAPC) Affects Lipopolysaccharide-Induced Mechanical Compliance Changes and Beat Frequency of mESC-Derived Cardiomyocyte Monolayers.

BACKGROUND: Septic cardiomyopathy increases mortality by 70% to 90% and results in mechanical dysfunction of cells. METHODS: Here, we created a LPS-induced in-vitro sepsis model with mouse embryonic stem cell-derived cardiomyocytes (mESC-CM) using the CellDrum technology which simultaneously measures mechanical compliance and beat frequency of mESCs. Visualization of reactive oxygen species (ROS), actin stress fibers, and mRNA quantification of endothelial protein C receptor (EPCR) and protease-activated receptor 1 (PAR1) before/after LPS incubation were used for method validation. Since activated protein C (APC) has cardioprotective effects, samples were treated with human recombinant APC (rhAPC) with/-out LPS predamage to demonstrate the application in therapeutic studies. RESULTS: Twelve hours LPS treatment (5 µg/mL) increased ROS and decreased actin stress fiber density and significantly downregulated EPCR and PAR1 compared to control samples (0.26, 0.39-fold respectively). rhAPC application (5 µg/mL, 12 h) decreased ROS and recovered actin density, EPCR, and PAR1 levels were significantly upregulated compared to LPS predamaged samples (4.79, 3.49-fold respectively). The beat frequencies were significantly decreased after 6- (86%) and 12 h (73%) of LPS application. Mechanical compliance of monolayers significantly increased in a time-dependent manner, up to eight times upon 12-h LPS incubation compared to controls. rhAPC incubation increased the beat frequency by 127% (6h-LPS) and 123% (12h-LPS) and decreased mechanical compliance by 68% (12h-LPS) compared to LPS predamaged samples. CONCLUSION: LPS-induced contraction dysfunction and the reversal effects of rhAPC were successfully assessed by the mechanical properties of mESC-CMs. The CellDrum technology proved a decent tool to simulate sepsis in-vitro.

A Novel In Vitro Wound Healing Assay Using Free-Standing, Ultra-Thin PDMS Membranes.

Advances in polymer science have significantly increased polymer applications in life sciences. We report the use of free-standing, ultra-thin polydimethylsiloxane (PDMS) membranes, called CellDrum, as cell culture substrates for an in vitro wound model. Dermal fibroblast monolayers from 28- and 88-year-old donors were cultured on CellDrums. By using stainless steel balls, circular cell-free areas were created in the cell layer (wounding). Sinusoidal strain of 1 Hz, 5% strain, was applied to membranes for 30 min in 4 sessions. The gap circumference and closure rate of un-stretched samples (controls) and stretched samples were monitored over 4 days to investigate the effects of donor age and mechanical strain on wound closure. A significant decrease in gap circumference and an increase in gap closure rate were observed in trained samples from younger donors and control samples from older donors. In contrast, a significant decrease in gap closure rate and an increase in wound circumference were observed in the trained samples from older donors. Through these results, we propose the model of a cell monolayer on stretchable CellDrums as a practical tool for wound healing research. The combination of biomechanical cell loading in conjunction with analyses such as gene/protein expression seems promising beyond the scope published here.

Mechanical induction of bi-directional orientation of primary porcine bladder smooth muscle cells in tubular fibrin-poly(vinylidene fluoride) scaffolds for ureteral and urethral repair using cyclic and focal balloon catheter stimulation.

To restore damaged organ function or to investigate organ mechanisms, it is necessary to prepare replicates that follow the biological role model as faithfully as possible. The interdisciplinary field of tissue engineering has great potential in regenerative medicine and might overcome negative side effects in the replacement of damaged organs. In particular, tubular organ structures of the genitourinary tract, such as the ureter and urethra, are challenging because of their complexity and special milieu that gives rise to incrustation, inflammation and stricture formation. Tubular biohybrids were prepared from primary porcine smooth muscle cells embedded in a fibrin gel with a stabilising poly(vinylidene fluoride) mesh. A mechanotransduction was performed automatically with a balloon kyphoplasty catheter. Diffusion of urea and creatinine, as well as the bursting pressure, were measured. Light and electron microscopy were used to visualise cellular distribution and orientation. Histological evaluation revealed a uniform cellular distribution in the fibrin gel. Mechanical stimulation with a stretch of 20% leads to a circumferential orientation of smooth muscle cells inside the matrix and a longitudinal alignment on the outer surface of the tubular structure. Urea and creatinine permeability and bursting pressure showed a non-statistically significant trend towards stimulated tissue constructs. In this proof of concept study, an innovative technique of intraluminal pressure for mechanical stimulation of tubular biohybrids prepared from autologous cells and a composite material induce bi-directional orientation of smooth muscle cells by locally and cyclically applied mechanical tension. Such geometrically driven patterns of cell growth within a scaffold may represent a key stage in the future tissue engineering of implantable ureter replacements that will allow the active transportation of urine from the renal pelvis into the bladder.

Mechano-Pharmacological Characterization of Cardiomyocytes Derived from Human Induced Pluripotent Stem Cells.

BACKGROUND/AIMS: Common systems for the quantification of cellular contraction rely on animal-based models, complex experimental setups or indirect approaches. The herein presented CellDrum technology for testing mechanical tension of cellular monolayers and thin tissue constructs has the potential to scale-up mechanical testing towards medium-throughput analyses. Using hiPS-Cardiac Myocytes (hiPS-CMs) it represents a new perspective of drug testing and brings us closer to personalized drug medication. METHODS: In the present study, monolayers of self-beating hiPS-CMs were grown on ultra-thin circular silicone membranes and deflect under the weight of the culture medium. Rhythmic contractions of the hiPS-CMs induced variations of the membrane deflection. The recorded contraction-relaxation-cycles were analyzed with respect to their amplitudes, durations, time integrals and frequencies. Besides unstimulated force and tensile stress, we investigated the effects of agonists and antagonists acting on Ca2+ channels (S-Bay K8644/verapamil) and Na+ channels (veratridine/lidocaine). RESULTS: The measured data and simulations for pharmacologically unstimulated contraction resembled findings in native human heart tissue, while the pharmacological dose-response curves were highly accurate and consistent with reference data. CONCLUSION: We conclude that the combination of the CellDrum with hiPS-CMs offers a fast, facile and precise system for pharmacological, toxicological studies and offers new preclinical basic research potential.

Development of a Bioreactor to Culture Tissue Engineered Ureters Based on the Application of Tubular OPTIMAIX 3D Scaffolds.

Regenerative medicine, tissue engineering and biomedical research give hope to many patients who need bio-implants. Tissue engineering applications have already been developed based on bioreactors. Physiological ureter implants, however, do not still function sufficiently, as they represent tubular hollow structures with very specific cellular structures and alignments consisting of several cell types. The aim of this study was to a develop a new bioreactor system based on seamless, collagenous, tubular OPTIMAIX 3D prototype sponge as scaffold material for ex-vivo culturing of a tissue engineered ureter replacement for future urological applications. Particular emphasis was given to a great extent to mimic the physiological environment similar to the in vivo situation of a ureter. NIH-3T3 fibroblasts, C2C12, Urotsa and primary genitourinary tract cells were applied as co-cultures on the scaffold and the penetration of cells into the collagenous material was followed. By the end of this study, the bioreactor was functioning, physiological parameter as temperature and pH and the newly developed BIOREACTOR system is applicable to tubular scaffold materials with different lengths and diameters. The automatized incubation system worked reliably. The tubular OPTIMAIX 3D sponge was a suitable scaffold material for tissue engineering purposes and co-cultivation procedures.

Phenotyping date palm varieties via leaflet cross-sectional imaging and artificial neural network application.

BACKGROUND: True date palms (Phoenix dactylifera L.) are impressive trees and have served as an indispensable source of food for mankind in tropical and subtropical countries for centuries. The aim of this study is to differentiate date palm tree varieties by analysing leaflet cross sections with technical/optical methods and artificial neural networks (ANN). RESULTS: Fluorescence microscopy images of leaflet cross sections have been taken from a set of five date palm tree cultivars (Hewlat al Jouf, Khlas, Nabot Soltan, Shishi, Um Raheem). After features extraction from images, the obtained data have been fed in a multilayer perceptron ANN with backpropagation learning algorithm. CONCLUSIONS: Overall, an accurate result in prediction and differentiation of date palm tree cultivars was achieved with average prediction in tenfold cross-validation is 89.1% and reached 100% in one of the best ANN.

Optical coherence tomography: a potential tool to predict premature rupture of fetal membranes.

A fundamental question addressed in this study was the feasibility of preterm birth prediction based on a noncontact investigation of fetal membranes in situ. Although the phenomena of preterm birth and the premature rupture of the fetal membrane are well known, currently, there are no diagnostic tools for their prediction. The aim of this study was to assess whether optical coherence tomography could be used for clinical investigations of high-risk pregnancies. The thickness of fetal membranes was measured in parallel by optical coherence tomography and histological techniques for the following types of birth: normal births, preterm births without premature ruptures and births at full term with premature rupture of membrane. Our study revealed that the membrane thickness correlates with the birth type. Normal births membranes were statistically significantly thicker than those belonging to the other two groups. Thus, in spite of almost equal duration of gestation of the normal births and the births at full term with premature rupture, the corresponding membrane thicknesses differed. This difference is possibly related to previously reported water accumulation in the membranes. The optical coherence tomography results were encouraging, suggesting that this technology could be used in future to predict and distinguish between different kinds of births.

Effects of spermine NONOate and ATP on protein aggregation: light scattering evidences.

BACKGROUND AND OBJECTIVE: Regulating protein function in the cell by small molecules, provide a rapid, reversible and tunable tool of metabolic control. However, due to its complexity the issue is poorly studied so far. The effects of small solutes on protein behavior can be studied by examining changes of protein secondary structure, in its hydrodynamic radius as well as its thermal aggregation. The study aim was to investigate effects of adenosine-5'-triphosphate (ATP), spermine NONOate (NO donor) as well as sodium/potassium ions on thermal aggregation of albumin and hemoglobin. To follow aggregation of the proteins, their diffusion coefficients were measured by quasi-elastic light scattering (QELS) at constant pH (7.4) in the presence of solutes over a temperature range from 25°C to 80°C. RESULTS AND DISCUSSION: 1) Spermine NONOate persistently decreased the hemoglobin aggregation temperature Tairrespectively of the Na+/K+ environment, 2) ATP alone had no effect on the protein's thermal stability but it facilitated protein's destabilization in the presence of spermine NONOate and 3) mutual effects of ATP and NO were strongly influenced by particular buffer ionic compositions. CONCLUSION: The ATP effect on protein aggregation was ambiguous: ATP alone had no effect on the protein's thermal stability but it facilitated protein's destabilization in the presence of nitric oxide. The magnitude and direction of the observed effects strongly depended on concentrations of K+ and Na+ in the solution.

Effects of spermine NONOate and ATP on the thermal stability of hemoglobin.

BACKGROUND: Minor changes in protein structure induced by small organic and inorganic molecules can result in significant metabolic effects. The effects can be even more profound if the molecular players are chemically active and present in the cell in considerable amounts. The aim of our study was to investigate effects of a nitric oxide donor (spermine NONOate), ATP and sodium/potassium environment on the dynamics of thermal unfolding of human hemoglobin (Hb). The effect of these molecules was examined by means of circular dichroism spectrometry (CD) in the temperature range between 25°C and 70°C. The alpha-helical content of buffered hemoglobin samples (0.1 mg/ml) was estimated via ellipticity change measurements at a heating rate of 1°C/min. RESULTS: Major results were: 1) spermine NONOate persistently decreased the hemoglobin unfolding temperature Tuirrespectively of the Na + /K + environment, 2) ATP instead increased the unfolding temperature by 3°C in both sodium-based and potassium-based buffers and 3) mutual effects of ATP and NO were strongly influenced by particular buffer ionic compositions. Moreover, the presence of potassium facilitated a partial unfolding of alpha-helical structures even at room temperature. CONCLUSION: The obtained data might shed more light on molecular mechanisms and biophysics involved in the regulation of protein activity by small solutes in the cell.

Fluid shear attenuates endothelial pseudopodia formation into the capillary lumen.

OBJECTIVE: Endothelial cells have the ability to undergo morphological shape changes, including projection of cytoplasmic pseudopodia into the capillary lumen. These cytoplasmic projections significantly influence the hemodynamic resistance to blood flow. To examine mechanotransduction mechanisms, we investigated in vivo the hemodynamic conditions in capillaries that control endothelial pseudopod formation. MATERIALS AND METHODS: Capillaries in rat skeletal muscle were fixed under carefully controlled perfusion conditions. The formation of endothelial pseudopodia were observed in cross-sections with electron microscopy and quantified with differential interference contrast microscopy under physiological, stasis, and reperfusion flow conditions. RESULTS: Application of physiological levels of fluid flow prevents capillary endothelium to project pseudopodia into the capillary lumen. Reduction of fluid flow to near zero promotes the incidence of pseudopod projection from 5% to 55% of capillaries. After capillary pseudopodia have formed under static conditions, about one-half retract upon restoration of fluid flow. The presence of red blood cells in the capillary lumen prevents pseudopod formation. CONCLUSIONS: The results suggest that there is a mechanism that serves to control cytoplasmic projections in capillary endothelium that is under the control of hemodynamic fluid stress. Investigation of pseudopodia growth on endothelial cells may be significant in understanding capillary obstruction in cardiovascular diseases.

Cytoplasmic water and hydration layer dynamics in human red blood cells.

The dynamics of water in human red blood cells was measured with quasielastic incoherent neutron scattering in the temperature range between 290 and 320 K. Neutron spectrometers with time resolutions of 40, 13, and 7 ps were combined to cover time scales of bulk water dynamics to reduced mobility interfacial water motions. A major fraction of approximately 90% of cell water is characterized by a translational diffusion coefficient similar to bulk water. A minor fraction of approximately 10% of cellular water exhibits reduced dynamics. This slow water fraction was attributed to dynamically bound water on the surface of hemoglobin which accounts for approximately half of the hydration layer.

Circular dichroism spectra of human hemoglobin reveal a reversible structural transition at body temperature.

Previously we have shown that human red blood cells (RBCs) undergo a sudden change from blocking to passing through a 1.3+/-0.2-microm micropipette when applying an aspiration pressure of 2.3 kPa at a critical transition temperature (Tc = 36.4+/-0.3 degrees C). Low-shear viscosity measurements suggested that changes in the molecular properties of hemoglobin might be responsible for this effect. To evaluate structural changes in hemoglobin at the critical temperature, we have used circular dichroism (CD) spectroscopy. The thermal denaturation curves of human hemoglobin A (HbA) and hemoglobin S (HbS) upon heating between 25 and 60 degrees C were non-linear and showed accelerated denaturation between 35 and 39 degrees C with a midpoint at 37.2+/-0.6 degrees C. The transition was reversible below 39 degrees C and independent of solution pH (pH 6.8-7.8). It was also independent of the oxygenation state of hemoglobin, since a sample that was extensively deoxygenated with N2 showed a similar transition by CD. These findings suggest that a structural change in hemoglobin may enable the cellular passage phenomenon as well as the temperature-dependent decrease in viscosity of RBC solutions.