Effect of Organic Selenium Supplementation on the Antioxidant Status, Immune Response, and the Relative Expression of IL-2 and IFN-γ Genes in Ewes During the Hot Season.

This study was conducted to evaluate the effects of different doses of selenium (Se) from Sel-Plex© (selenium-enriched Saccharomyces cerevisiae yeast) supplement on the antioxidant status, the antibody titers against the foot-and-mouth disease virus, and the expression of interleukin-2 (IL-2) and interferon-γ (IFN-γ) genes in ewes during the hot season. Six ewes were kept at 25 °C and received basal diet (the negative control group), and 24 ewes were kept at 38 °C for 5 h per day and received no supplement (the positive control), 0.15, 0.30, and 0.45 mg Se/kg. Ewes in the positive control had higher (P<0.001) liver enzyme activity, malondialdehyde (MDA), and cortisol levels, and lower antibody titer than the negative control. The liver enzymes' lowest (P<0.001) activities were observed in ewes receiving 0.30 and 0.45 mg Se/kg. Ewes receiving 0.30 and 0.45 mg Se/kg had lower MDA levels than other treatments. Ewes receiving 0.30 and 0.45 mg Se/kg had higher (P<0.001) total antioxidant capacity levels than those receiving 0.15 mg Se/kg and the positive control. Se-supplemented groups had lower (P<0.001) relative expression of IL-2 and higher (P<0.04) expression of IFN-γ than the positive control. The antibody titer was the same in the positive control and the group receiving 0.15 mg Se/kg. Ewes fed a diet with 0.30 and 0.45 mg Se/kg had higher (P<0.011) antibody titer than the positive control. The Se supplementation can reverse the decrease of antioxidant capacity and immune function caused by heat stress, and 0.3 mg Se/kg from Sel-Plex©is the best dose.

A multiplexed plant-animal SNP array for selective breeding and species conservation applications.

Reliable and high-throughput genotyping platforms are of immense importance for identifying and dissecting genomic regions controlling important phenotypes, supporting selection processes in breeding programs, and managing wild populations and germplasm collections. Amongst available genotyping tools, single nucleotide polymorphism arrays have been shown to be comparatively easy to use and generate highly accurate genotypic data. Single-species arrays are the most commonly used type so far; however, some multi-species arrays have been developed for closely related species that share single nucleotide polymorphism markers, exploiting inter-species cross-amplification. In this study, the suitability of a multiplexed plant-animal single nucleotide polymorphism array, including both closely and distantly related species, was explored. The performance of the single nucleotide polymorphism array across species for diverse applications, ranging from intra-species diversity assessments to parentage analysis, was assessed. Moreover, the value of genotyping pooled DNA of distantly related species on the single nucleotide polymorphism array as a technique to further reduce costs was evaluated. Single nucleotide polymorphism performance was generally high, and species-specific single nucleotide polymorphisms proved suitable for diverse applications. The multi-species single nucleotide polymorphism array approach reported here could be transferred to other species to achieve cost savings resulting from the increased throughput when several projects use the same array, and the pooling technique adds another highly promising advancement to additionally decrease genotyping costs by half.

Genome-wide association identifies key loci controlling blackberry postharvest quality.

Introduction: Blackberry (Rubus subgenus Rubus) is a soft-fruited specialty crop that often suffers economic losses due to degradation in the shipping process. During transportation, fresh-market blackberries commonly leak, decay, deform, or become discolored through a disorder known as red drupelet reversion (RDR). Over the past 50 years, breeding programs have achieved better fruit firmness and postharvest quality through traditional selection methods, but the underlying genetic variation is poorly understood. Methods: We conducted a genome-wide association of fruit firmness and RDR measured in 300 tetraploid fresh-market blackberry genotypes from 2019-2021 with 65,995 SNPs concentrated in genic regions of the R. argutus reference genome. Results: Fruit firmness and RDR had entry-mean broad sense heritabilities of 68% and 34%, respectively. Three variants on homologs of polygalacturonase (PG), pectin methylesterase (PME), and glucan endo-1,3-ß-glucosidase explained 27% of variance in fruit firmness and were located on chromosomes Ra06, Ra01, and Ra02, respectively. Another PG homolog variant on chromosome Ra02 explained 8% of variance in RDR, but it was in strong linkage disequilibrium with 212 other RDR-associated SNPs across a 23 Mb region. A large cluster of six PME and PME inhibitor homologs was located near the fruit firmness quantitative trait locus (QTL) identified on Ra01. RDR and fruit firmness shared a significant negative correlation (r = -0.28) and overlapping QTL regions on Ra02 in this study. Discussion: Our work demonstrates the complex nature of postharvest quality traits in blackberry, which are likely controlled by many small-effect QTLs. This study is the first large-scale effort to map the genetic control of quantitative traits in blackberry and provides a strong framework for future GWAS. Phenotypic and genotypic datasets may be used to train genomic selection models that target the improvement of postharvest quality.

A chromosome-length genome assembly and annotation of blackberry (Rubus argutus, cv. "Hillquist").

Blackberries (Rubus spp.) are the fourth most economically important berry crop worldwide. Genome assemblies and annotations have been developed for Rubus species in subgenus Idaeobatus, including black raspberry (R. occidentalis), red raspberry (R. idaeus), and R. chingii, but very few genomic resources exist for blackberries and their relatives in subgenus Rubus. Here we present a chromosome-length assembly and annotation of the diploid blackberry germplasm accession "Hillquist" (R. argutus). "Hillquist" is the only known source of primocane-fruiting (annual-fruiting) in tetraploid fresh-market blackberry breeding programs and is represented in the pedigree of many important cultivars worldwide. The "Hillquist" assembly, generated using Pacific Biosciences long reads scaffolded with high-throughput chromosome conformation capture sequencing, consisted of 298 Mb, of which 270 Mb (90%) was placed on 7 chromosome-length scaffolds with an average length of 38.6 Mb. Approximately 52.8% of the genome was composed of repetitive elements. The genome sequence was highly collinear with a novel maternal haplotype-resolved linkage map of the tetraploid blackberry selection A-2551TN and genome assemblies of R. chingii and red raspberry. A total of 38,503 protein-coding genes were predicted, of which 72% were functionally annotated. Eighteen flowering gene homologs within a previously mapped locus aligning to an 11.2 Mb region on chromosome Ra02 were identified as potential candidate genes for primocane-fruiting. The utility of the "Hillquist" genome has been demonstrated here by the development of the first genotyping-by-sequencing-based linkage map of tetraploid blackberry and the identification of possible candidate genes for primocane-fruiting. This chromosome-length assembly will facilitate future studies in Rubus biology, genetics, and genomics and strengthen applied breeding programs.

Autopolyploid inheritance and a heterozygous reciprocal translocation shape chromosome genetic behavior in tetraploid blueberry (Vaccinium corymbosum).

Understanding chromosome recombination behavior in polyploidy species is key to advancing genetic discoveries. In blueberry, a tetraploid species, the line of evidences about its genetic behavior still remain poorly understood, owing to the inter-specific, and inter-ploidy admixture of its genome and lack of in depth genome-wide inheritance and comparative structural studies. Here we describe a new high-quality, phased, chromosome-scale genome of a diploid blueberry, clone W85. The genome was integrated with cytogenetics and high-density, genetic maps representing six tetraploid blueberry cultivars, harboring different levels of wild genome admixture, to uncover recombination behavior and structural genome divergence across tetraploid and wild diploid species. Analysis of chromosome inheritance and pairing demonstrated that tetraploid blueberry behaves as an autotetraploid with tetrasomic inheritance. Comparative analysis demonstrated the presence of a reciprocal, heterozygous, translocation spanning one homolog of chr-6 and one of chr-10 in the cultivar Draper. The translocation affects pairing and recombination of chromosomes 6 and 10. Besides the translocation detected in Draper, no other structural genomic divergences were detected across tetraploid cultivars and highly inter-crossable wild diploid species. These findings and resources will facilitate new genetic and comparative genomic studies in Vaccinium and the development of genomic assisted selection strategy for this crop.

A first complete phylogenomic hypothesis for diploid blueberries (Vaccinium section Cyanococcus).

PREMISE: The true blueberries (Vaccinium sect. Cyanococcus; Ericaceae), endemic to North America, have been intensively studied for over a century. However, with species estimates ranging from nine to 24 and much confusion regarding species boundaries, this ecologically and economically valuable group remains inadequately understood at a basic evolutionary and taxonomic level. As a first step toward understanding the evolutionary history and taxonomy of this species complex, we present the first phylogenomic hypothesis of the known diploid blueberries. METHODS: We used flow cytometry to verify the ploidy of putative diploid taxa and a target-enrichment approach to obtain a genomic data set for phylogenetic analyses. RESULTS: Despite evidence of gene flow, we found that a primary phylogenetic signal is present. Monophyly for all morphospecies was recovered, with two notable exceptions: one sample of V. boreale was consistently nested in the V. myrtilloides clade and V. caesariense was nested in the V. fuscatum clade. One diploid taxon, Vaccinium pallidum, is implicated as having a homoploid hybrid origin. CONCLUSIONS: This foundational study represents the first attempt to elucidate evolutionary relationships of the true blueberries of North America with a phylogenomic approach and sets the stage for multiple avenues of future study such as a taxonomic revision of the group, the verification of a homoploid hybrid taxon, and the study of polyploid lineages within the context of a diploid phylogeny.

Identification of late blight resistance quantitative trait loci in Solanum pimpinellifolium accession PI 270441.

Late blight (LB), caused by the oomycete Phytophthora infestans, is one of the most destructive diseases of the cultivated tomato (Solanum lycopersicum L.) and potato (Solanum tuberosum L.) worldwide. Genetic changes in the pathogen have resulted in the emergence of new genotypes, overcoming formerly effective fungicides or host resistance genes. We previously reported the identification of a LB-resistant accession (PI 270441) of the wild tomato species S. pimpinellifolium L. and the high heritability of its resistance. In the present study, an F2 population (n = 1,209), derived from a cross between PI 270441 and a LB-susceptible tomato breeding line (Fla. 8059), was screened for response to LB infection. Extreme resistant (n = 44) and susceptible (n = 39) F2 individuals were selected and used in a trait-based marker analysis (TBA; a.k.a selective genotyping) to identify and map quantitative trait loci (QTLs) conferring LB resistance. Reduced representation libraries (RRLs) of Fla. 8059 and PI 270441 were constructed, sequenced, and mapped to the tomato genome. A total of 13,054 single-nucleotide polymorphisms (SNPs) were identified, of which, 200 were used to construct a genetic linkage map and locate QTLs. Four LB resistance QTLs were identified on chromosomes 1, 10, and 11 of PI 270441. The markers associated with these QTLs can be used to transfer LB resistance from PI 270441 into new tomato cultivars and to develop near-isogenic lines for fine mapping of the QTL.

There and back again; historical perspective and future directions for Vaccinium breeding and research studies.

The genus Vaccinium L. (Ericaceae) contains a wide diversity of culturally and economically important berry crop species. Consumer demand and scientific research in blueberry (Vaccinium spp.) and cranberry (Vaccinium macrocarpon) have increased worldwide over the crops' relatively short domestication history (~100 years). Other species, including bilberry (Vaccinium myrtillus), lingonberry (Vaccinium vitis-idaea), and ohelo berry (Vaccinium reticulatum) are largely still harvested from the wild but with crop improvement efforts underway. Here, we present a review article on these Vaccinium berry crops on topics that span taxonomy to genetics and genomics to breeding. We highlight the accomplishments made thus far for each of these crops, along their journey from the wild, and propose research areas and questions that will require investments by the community over the coming decades to guide future crop improvement efforts. New tools and resources are needed to underpin the development of superior cultivars that are not only more resilient to various environmental stresses and higher yielding, but also produce fruit that continue to meet a variety of consumer preferences, including fruit quality and health related traits.

High-density linkage map construction and identification of loci regulating fruit quality traits in blueberry.

Fruit quality traits play a significant role in consumer preferences and consumption in blueberry (Vaccinium corymbosum L). The objectives of this study were to construct a high-density linkage map and to identify the underlying genetic basis of fruit quality traits in blueberry. A total of 287 F1 individuals derived from a cross between two southern highbush blueberry cultivars, 'Reveille' and 'Arlen', were phenotyped over three years (2016-2018) for fruit quality-related traits, including titratable acidity, pH, total soluble solids, and fruit weight. A high-density linkage map was constructed using 17k single nucleotide polymorphisms markers. The linkage map spanned a total of 1397 cM with an average inter-loci distance of 0.08 cM. The quantitative trait loci interval mapping based on the hidden Markov model identified 18 loci for fruit quality traits, including seven loci for fruit weight, three loci for titratable acidity, five loci for pH, and three loci for total soluble solids. Ten of these loci were detected in more than one year. These loci explained phenotypic variance ranging from 7 to 28% for titratable acidity and total soluble solid, and 8-13% for pH. However, the loci identified for fruit weight did not explain more than 10% of the phenotypic variance. We also reported the association between fruit quality traits and metabolites detected by Proton nuclear magnetic resonance analysis directly responsible for these fruit quality traits. Organic acids, citric acid, and quinic acid were significantly (P < 0.05) and positively correlated with titratable acidity. Sugar molecules showed a strong and positive correlation with total soluble solids. Overall, the study dissected the genetic basis of fruit quality traits and established an association between these fruit quality traits and metabolites.

An optimized protocol for stepwise optimization of real-time RT-PCR analysis.

Computational tool-assisted primer design for real-time reverse transcription (RT) PCR (qPCR) analysis largely ignores the sequence similarities between sequences of homologous genes in a plant genome. It can lead to false confidence in the quality of the designed primers, which sometimes results in skipping the optimization steps for qPCR. However, the optimization of qPCR parameters plays an essential role in the efficiency, specificity, and sensitivity of each gene's primers. Here, we proposed an optimized approach to sequentially optimizing primer sequences, annealing temperatures, primer concentrations, and cDNA concentration range for each reference (and target) gene. Our approach started with a sequence-specific primer design that should be based on the single-nucleotide polymorphisms (SNPs) present in all the homologous sequences for each of the reference (and target) genes under study. By combining the efficiency calibrated and standard curve methods with the 2-ΔΔCt method, the standard cDNA concentration curve with a logarithmic scale was obtained for each primer pair for each gene. As a result, an R2 ≥ 0.9999 and the efficiency (E) = 100 ± 5% should be achieved for the best primer pair of each gene, which serve as the prerequisite for using the 2-ΔΔCt method for data analysis. We applied our newly developed approach to identify the best reference genes in different tissues and at various inflorescence developmental stages of Tripidium ravennae, an ornamental and biomass grass, and validated their utility under varying abiotic stress conditions. We also applied this approach to test the expression stability of six reference genes in soybean under biotic stress treatment with Xanthomonas axonopodis pv. glycines (Xag). Thus, these case studies demonstrated the effectiveness of our optimized protocol for qPCR analysis.

Reproductive developmental transcriptome analysis of Tripidium ravennae (Poaceae).

BACKGROUND: Tripidium ravennae is a cold-hardy, diploid species in the sugarcane complex (Poaceae subtribe Saccharinae) with considerable potential as a genetic resource for developing improved bioenergy and ornamental grasses. An improved understanding of the genetic regulation of reproductive processes (e.g., floral induction, inflorescence development, and seed development) will enable future applications of precision breeding and gene editing of floral and seed development. In particular, the ability to silence reproductive processes would allow for developing seedless forms of valuable but potentially invasive plants. The objective of this research was to characterize the gene expression environment of reproductive development in T. ravennae. RESULTS: During the early phases of inflorescence development, multiple key canonical floral integrators and pathways were identified. Annotations of type II subfamily of MADS-box transcription factors, in particular, were over-represented in the GO enrichment analyses and tests for differential expression (FDR p-value < 0.05). The differential expression of floral integrators observed in the early phases of inflorescence development diminished prior to inflorescence determinacy regulation. Differential expression analysis did not identify many unique genes at mid-inflorescence development stages, though typical biological processes involved in plant growth and development expressed abundantly. The increase in inflorescence determinacy regulatory elements and putative homeotic floral development unigenes at mid-inflorescence development coincided with the expression of multiple meiosis annotations and multicellular organism developmental processes. Analysis of seed development identified multiple unigenes involved in oxidative-reductive processes. CONCLUSION: Reproduction in grasses is a dynamic system involving the sequential coordination of complex gene regulatory networks and developmental processes. This research identified differentially expressed transcripts associated with floral induction, inflorescence development, and seed development in T. ravennae. These results provide insights into the molecular regulation of reproductive development and provide a foundation for future investigations and analyses, including genome annotation, functional genomics characterization, gene family evolutionary studies, comparative genomics, and precision breeding.

An anchored chromosome-scale genome assembly of spinach improves annotation and reveals extensive gene rearrangements in euasterids.

Spinach (Spinacia oleracea L.) is a member of the Caryophyllales family, a basal eudicot asterid that consists of sugar beet (Beta vulgaris L. subsp. vulgaris), quinoa (Chenopodium quinoa Willd.), and amaranth (Amaranthus hypochondriacus L.). With the introduction of baby leaf types, spinach has become a staple food in many homes. Production issues focus on yield, nitrogen-use efficiency and resistance to downy mildew (Peronospora effusa). Although genomes are available for the above species, a chromosome-level assembly exists only for quinoa, allowing for proper annotation and structural analyses to enhance crop improvement. We independently assembled and annotated genomes of the cultivar Viroflay using short-read strategy (Illumina) and long-read strategies (Pacific Biosciences) to develop a chromosome-level, genetically anchored assembly for spinach. Scaffold N50 for the Illumina assembly was 389 kb, whereas that for Pacific BioSciences was 4.43 Mb, representing 911 Mb (93% of the genome) in 221 scaffolds, 80% of which are anchored and oriented on a sequence-based genetic map, also described within this work. The two assemblies were 99.5% collinear. Independent annotation of the two assemblies with the same comprehensive transcriptome dataset show that the quality of the assembly directly affects the annotation with significantly more genes predicted (26,862 vs. 34,877) in the long-read assembly. Analysis of resistance genes confirms a bias in resistant gene motifs more typical of monocots. Evolutionary analysis indicates that Spinacia is a paleohexaploid with a whole-genome triplication followed by extensive gene rearrangements identified in this work. Diversity analysis of 75 lines indicate that variation in genes is ample for hypothesis-driven, genomic-assisted breeding enabled by this work.

Genome sequence of Monilinia vaccinii-corymbosi sheds light on mummy berry disease infection of blueberry and mating type.

Mummy berry disease, caused by the fungal pathogen Monilinia vaccinii-corymbosi (Mvc), is one of the most economically important diseases of blueberries in North America. Mvc is capable of inducing two separate blighting stages during its life cycle. Infected fruits are rendered mummified and unmarketable. Genomic data for this pathogen is lacking, but could be useful in understanding the reproductive biology of Mvc and the mechanisms it deploys to facilitate host infection. In this study, PacBio sequencing and Hi-C interaction data were utilized to create a chromosome-scale reference genome for Mvc. The genome comprises nine chromosomes with a total length of 30 Mb, an N50 length of 4.06 Mb, and an average 413X sequence coverage. A total of 9399 gene models were predicted and annotated, and BUSCO analysis revealed that 98% of 1,438 searched conserved eukaryotic genes were present in the predicted gene set. Potential effectors were identified, and the mating-type (MAT) locus was characterized. Biotrophic effectors allow the pathogen to avoid recognition by the host plant and evade or mitigate host defense responses during the early stages of fruit infection. Following locule colonization, necrotizing effectors promote the mummification of host tissues. Potential biotrophic effectors utilized by Mvc include chorismate mutase for reducing host salicylate and necrotrophic effectors include necrosis-inducing proteins and hydrolytic enzymes for macerating host tissue. The MAT locus sequences indicate the potential for homothallism in the reference genome, but a deletion allele of the MAT locus, characterized in a second isolate, indicates heterothallism. Further research is needed to verify the roles of individual effectors in virulence and to determine the role of the MAT locus in outcrossing and population genotypic diversity.

RNA-Seq and Gene Regulatory Network Analyses Uncover Candidate Genes in the Early Defense to Two Hemibiotrophic Colletorichum spp. in Strawberry.

Two hemibiotrophic pathogens, Colletotrichum acutatum (Ca) and C. gloeosporioides (Cg), cause anthracnose fruit rot and anthracnose crown rot in strawberry (Fragaria × ananassa Duchesne), respectively. Both Ca and Cg can initially infect through a brief biotrophic phase, which is associated with the production of intracellular primary hyphae that can infect host cells without causing cell death and establishing hemibiotrophic infection (HBI) or quiescent (latent infections) in leaf tissues. The Ca and Cg HBI in nurseries and subsequent distribution of asymptomatic infected transplants to fruit production fields is the major source of anthracnose epidemics in North Carolina. In the absence of complete resistance, strawberry varieties with good fruit quality showing rate-reducing resistance have frequently been used as a source of resistance to Ca and Cg. However, the molecular mechanisms underlying the rate-reducing resistance or susceptibility to Ca and Cg are still unknown. We performed comparative transcriptome analyses to examine how rate-reducing resistant genotype NCS 10-147 and susceptible genotype 'Chandler' respond to Ca and Cg and identify molecular events between 0 and 48 h after the pathogen-inoculated and mock-inoculated leaf tissues. Although plant response to both Ca and Cg at the same timepoint was not similar, more genes in the resistant interaction were upregulated at 24 hpi with Ca compared with those at 48 hpi. In contrast, a few genes were upregulated in the resistant interaction at 48 hpi with Cg. Resistance response to both Ca and Cg was associated with upregulation of MLP-like protein 44, LRR receptor-like serine/threonine-protein kinase, and auxin signaling pathway, whereas susceptibility was linked to modulation of the phenylpropanoid pathway. Gene regulatory network inference analysis revealed candidate transcription factors (TFs) such as GATA5 and MYB-10, and their downstream targets were upregulated in resistant interactions. Our results provide valuable insights into transcriptional changes during resistant and susceptible interactions, which can further facilitate assessing candidate genes necessary for resistance to two hemibiotrophic Colletotrichum spp. in strawberry.

A Rosaceae Family-Level Approach To Identify Loci Influencing Soluble Solids Content in Blackberry for DNA-Informed Breeding.

A Rosaceae family-level candidate gene approach was used to identify genes associated with sugar content in blackberry (Rubus subgenus Rubus). Three regions conserved among apple (Malus × domestica), peach (Prunus persica), and alpine strawberry (Fragaria vesca) were identified that contained previously detected sweetness-related quantitative trait loci (QTL) in at least two of the crops. Sugar related genes from these conserved regions and 789 sugar-associated apple genes were used to identify 279 Rubus candidate transcripts. A Hyb-Seq approach was used in conjunction with PacBio sequencing to generate haplotype level sequence information of sugar-related genes for 40 cultivars with high and low soluble solids content from the University of Arkansas and USDA blackberry breeding programs. Polymorphisms were identified relative to the 'Hillquist' blackberry (R. argutus) and ORUS 4115-3 black raspberry (R. occidentalis) genomes and tested for their association with soluble solids content (SSC). A total of 173 alleles were identified that were significantly (α = 0.05) associated with SSC. KASP genotyping was conducted for 92 of these alleles on a validation set of blackberries from each breeding program and 48 markers were identified that were significantly associated with SSC. One QTL, qSSC-Ruh-ch1.1, identified in both breeding programs accounted for an increase of 1.5 °Brix and the polymorphisms were detected in the intron space of a sucrose synthase gene. This discovery represents the first environmentally stable sweetness QTL identified in blackberry. The approach demonstrated in this study can be used to develop breeding tools for other crops that have not yet benefited directly from the genomics revolution.

3D point cloud data to quantitatively characterize size and shape of shrub crops.

Size and shape are important properties of shrub crops such as blueberries, and they can be particularly useful for evaluating bush architecture suited to mechanical harvesting. The overall goal of this study was to develop a 3D imaging approach to measure size-related traits and bush shape that are relevant to mechanical harvesting. 3D point clouds were acquired for 367 bushes from five genotype groups. Point cloud data were preprocessed to obtain clean bush points for characterizing bush architecture, including bush morphology (height, width, and volume), crown size, and shape descriptors (path curve λ and five shape indices). One-dimensional traits (height, width, and crown size) had high correlations (R 2 = 0.88-0.95) between proposed method and manual measurements, whereas bush volume showed relatively lower correlations (R 2 = 0.78-0.85). These correlations suggested that the present approach was accurate in measuring one-dimensional size traits and acceptable in estimating three-dimensional bush volume. Statistical results demonstrated that the five genotype groups were statistically different in crown size and bush shape. The differences matched with human evaluation regarding optimal bush architecture for mechanical harvesting. In particular, a visualization tool could be generated using crown size and path curve λ, which showed great potential of determining bush architecture suitable for mechanical harvesting quickly. Therefore, the processing pipeline of 3D point cloud data presented in this study is an effective tool for blueberry breeding programs (in particular for mechanical harvesting) and farm management.

Sequencing-Based Bin Map Construction of a Tomato Mapping Population, Facilitating High-Resolution Quantitative Trait Loci Detection.

Genotyping-by-sequencing (GBS) was employed to construct a highly saturated genetic linkage map of a tomato ( L.) recombinant inbred line (RIL) population, derived from a cross between cultivar NC EBR-1 and the wild tomato L. accession LA2093. A pipeline was developed to convert single nucleotide polymorphism (SNP) data into genomic bins, which could be used for fine mapping of quantitative trait loci (QTL) and identification of candidate genes. The pipeline, implemented in a python script named SNPbinner, adopts a hidden Markov model approach for calculation of recombination breakpoints followed by genomic bins construction. The total length of the newly developed high-resolution genetic map was 1.2-fold larger than previously estimated based on restriction fragment length polymorphism (RFLP) and polymerase chain reaction (PCR)-based markers. The map was used to verify and refine QTL previously identified for two fruit quality traits in the RIL population, fruit weight (FW) and fruit lycopene content (LYC). Two well-described FW QTL ( and ) were localized precisely at their known underlying causative genes, and the QTL intervals were decreased by two- to tenfold. A major QTL for LYC content () was verified at high resolution and its underlying causative gene was determined to be ζ (). The RIL population, the high resolution genetic map, and the easy-to-use genotyping pipeline, SNPbinner, are made publicly available.

Identification and Mapping of Late Blight Resistance Quantitative Trait Loci in Tomato Accession PI 163245.

Late blight (LB), caused by the oomycete (Mont.) de Bary, is one of the most devastating diseases of tomato ( L.) and potato ( tuberosum L. worldwide. The importance of LB on tomato has increased due to the occurrence of aggressive and fungicide-resistant clonal lineages of . Consequently, identification and characterization of new sources of genetic resistance to LB has become a priority in tomato breeding. Previously, we reported accession PI 163245 as a promising source of highly heritable LB resistance for tomato breeding. The purpose of this study was to identify and map quantitative trait loci (QTLs) associated with LB resistance in this accession using a trait-based marker analysis (a.k.a. selective genotyping). An F mapping population ( = 560) derived from a cross between a LB-susceptible tomato breeding line (Fla. 8059) and PI 163245 was screened for LB resistance, and the most resistant ( = 39) and susceptible ( = 35) individuals were selected for genotyping. Sequencing and comparison of the reduced representation libraries (RRLs) derived from genomic DNA of the two parents resulted in the identification of 33,541 putative single nucleotide polymorphism (SNP) markers, of which, 233 genome-wide markers were used to genotype the 74 selected F individuals. The marker analysis resulted in the identification of four LB resistance QTLs conferred by PI 163245, located on chromosomes 2, 3, 10, and 11. Research is underway to develop near-isogenic lines (NILs) for fine mapping the QTLs and develop tomato breeding lines with LB resistance introduced from PI 163245.

Regions Underlying Population Structure and the Genomics of Organ Size Determination in Capsicum annuum.

Fruits, as an important part of the human diet, have been under strong selection during domestication. In general, continued directed selection has led to varieties having larger fruit with greater shape variation and tremendous increases in fruit mass. Common cultivated peppers ( L.) are found in a wide range of sizes and shapes. Analysis of genetic relatedness and population structure has shown that the large-fruited, nonpungent types have reduced diversity and comprise a highly structured group. To explore this population structure, a statistical method for detecting fixation within subpopulations was applied to a set of 21 pungent and 19 nonpungent lines that represent the pepper breeding germplasm. We have identified 17 blocks within the pepper genome that are conserved among nonpungent large-fruited varieties. To determine if these regions were fixed by selection on fruit size or pungency, quantitative trait loci (QTLs) from seven studies along with capsaicin biosynthesis genes and homologs of organ size regulatory genes were mapped onto the current pepper genome assembly. Of the 17 fixed regions, 14 overlapped with fruit size or shape QTLs. There were seven putative organ size regulators and seven capsaicin biosynthetic genes within these regions. This work defines genomic regions that underly structure within the nonpungent pepper germplasm and QTLs or genes that may have been selected for during the development of large-fruited nonpungent pepper varieties.

A HapMap leads to a Capsicum annuum SNP infinium array: a new tool for pepper breeding.

The Capsicum genus (Pepper) is a part of the Solanacae family. It has been important in many cultures worldwide for its key nutritional components and uses as spices, medicines, ornamentals and vegetables. Worldwide population growth is associated with demand for more nutritionally valuable vegetables while contending with decreasing resources and available land. These conditions require increased efficiency in pepper breeding to deal with these imminent challenges. Through resequencing of inbred lines we have completed a valuable haplotype map (HapMap) for the pepper genome based on single-nucleotide polymorphisms (SNP). The identified SNPs were annotated and classified based on their gene annotation in the pepper draft genome sequence and phenotype of the sequenced inbred lines. A selection of one marker per gene model was utilized to create the PepperSNP16K array, which simultaneously genotyped 16 405 SNPs, of which 90.7% were found to be informative. A set of 84 inbred and hybrid lines and a mapping population of 90 interspecific F2 individuals were utilized to validate the array. Diversity analysis of the inbred lines shows a distinct separation of bell versus chile/hot pepper types and separates them into five distinct germplasm groups. The interspecific population created between Tabasco (C. frutescens chile type) and P4 (C. annuum blocky type) produced a linkage map with 5546 markers separated into 1361 bins on twelve 12 linkage groups representing 1392.3 cM. This publically available genotyping platform can be used to rapidly assess a large number of markers in a reproducible high-throughput manner for pepper. As a standardized tool for genetic analyses, the PepperSNP16K can be used worldwide to share findings and analyze QTLs for important traits leading to continued improvement of pepper for consumers. Data and information on the array are available through the Solanaceae Genomics Network.