Nanoscrolls of Janus Monolayer Transition Metal Dichalcogenides.

Tubular structures of transition metal dichalcogenides (TMDCs) have attracted attention in recent years due to their emergent physical properties, such as the giant bulk photovoltaic effect and chirality-dependent superconductivity. To understand and control these properties, it is highly desirable to develop a sophisticated method to fabricate TMDC tubular structures with smaller diameters and a more uniform crystalline orientation. For this purpose, the rolling up of TMDC monolayers into nanoscrolls is an attractive approach to fabricating such a tubular structure. However, the symmetric atomic arrangement of a monolayer TMDC generally makes its tubular structure energetically unstable due to considerable lattice strain in curved monolayers. Here, we report the fabrication of narrow nanoscrolls by using Janus TMDC monolayers, which have an out-of-plane asymmetric structure. Janus WSSe and MoSSe monolayers were prepared by the plasma-assisted surface atom substitution of WSe2 and MoSe2 monolayers, respectively, and then were rolled by solution treatment. The multilayer tubular structures of Janus nanoscrolls were revealed by scanning transmission electron microscopy observations. Atomic resolution elemental analysis confirmed that the Janus monolayers were rolled up with the Se-side surface on the outside. We found that the present nanoscrolls have the smallest diameter of about 5 nm, which is almost the same as the value predicted by the DFT calculation. The difference in work functions between the S- and Se-side surfaces was measured by Kelvin probe force microscopy, which is in good agreement with the theoretical prediction. Strong interlayer interactions and anisotropic optical responses of the Janus nanoscrolls were also revealed by Raman and photoluminescence spectroscopy.

Symmetry Engineering in Twisted Bilayer WTe2.

The fabrication of artificial structures using a twisted van der Waals assembly has been a key technique for recent advancements in the research of two-dimensional (2D) materials. To date, various exotic phenomena have been observed thanks to the modified electron correlation or moiré structure controlled by the twist angle. However, the twisted van der Waals assembly has further potential to modulate the physical properties by controlling the symmetry. In this study, we fabricated twisted bilayer WTe2 and demonstrated that the twist angle successfully controls the spatial inversion symmetry and hence the spin splitting in the band structure. Our results reveal the further potential of a twisted van der Waals assembly, suggesting the feasibility of pursuing new physical phenomena in 2D materials based on the control of symmetry.

Understanding Micro and Atomic Structures of Secondary Phases in Cu-Doped SnTe.

Highly efficient thermoelectric materials require, including point defects within the host matrix, secondary phases generating positive effects on lowering lattice thermal conductivity (κL ). Amongst effective dopants for a functional thermoelectric material, SnTe, Cu doping realizes the ultra-low κL approaching the SnTe amorphous limit. Such effective κL reduction is first attributed to strong phonon scattering by substitutional Cu atoms at Sn sites and interstitial defects in the host SnTe. However, other crystallographic defects in secondary phases have been unfocused. Here, this work reports micro- to atomic-scale characterization on secondary phases of Cu-doped SnTe using advanced microscopes. It is found that Cu-rich secondary phases begin precipitation ≈1.7 at% Cu (x = 0.034 where Sn1- x Cux Te). The Cu-rich secondary phases encapsulate two distinct solids: Cu2 SnTe3 ( F 4 ¯ 3 m $F\bar{4}3m$ ) has semi-coherent interfaces with SnTe ( F m 3 ¯ m $Fm\bar{3}{\rm{m}}$ ) such that they minimize lattice mismatch to favor the thermoelectric transport; the other resembles a stoichiometric Cu2 Te model, yet is so meta-stable that it demonstrates not only various defects such as dislocation cores and ordered/disordered Cu vacancies, but also dynamic grain-boundary migration with heating and a subsequent phase transition ≈350 °C. The atomic-scale analysis on the Cu-rich secondary phases offers viable strategies for reducing κL through Cu addition to SnTe.

Singular behaviour of atomic ordering in Pt-Co nanocubes starting from core-shell configurations.

The ordered structure of platinum-cobalt (Pt-Co) alloy nanoparticles has been studied actively because the structure influences their magnetic and catalytic properties. On the Pt-Co alloy's surface, Pt atoms preferentially segregate during annealing to reduce the surface energy. Such surface segregation has been shown to promote the formation of an ordered structure near the surface of Pt-Co thin films. Although this phenomenon seems also useful to control the nanoparticle structure, this has not been observed. Here, we have studied the ordered structure in annealed Pt@Co core-shell nanoparticles using a scanning transmission electron microscope. The nanoparticles were chemically synthesized, and their structural changes after annealing at 600 °C, 700 °C, and 800 °C for 3 h were observed. After being annealed at 600 °C and 800 °C, the particles contained the L12-Pt3Co ordered structure. The structure seems reasonable considering an initial Pt : Co ratio of ∼4 : 1. However, we found that the L10-PtCo structure was formed near the nanoparticle surface after annealing at 700 °C. The L10-PtCo structure was thought to be formed from the surface segregation of Pt atoms and insufficient diffusion of Pt and Co atoms to mix them in the particle overall.

Quantitative Characterization of the Thermally Driven Alloying State in Ternary Ir-Pd-Ru Nanoparticles.

Compositional and structural arrangements of constituent elements, especially those at the surface and near-surface layers, are known to greatly influence the catalytic performance of alloyed nanoparticles (NPs). Although much research effort often focuses on the ability to tailor these important aspects in the design stage, their stability under realistic operating conditions remains a major technical challenge. Here, the compositional stability and associated structural evolution of a ternary iridium-palladium-ruthenium (Ir-Pd-Ru) nanoalloy at elevated temperatures have been studied using interrupted in situ scanning transmission electron microscopy and theoretical modeling. The results are based on a combinatory approach of statistical sampling at the sub-nanometer scale for large groups of NPs as well as tracking individual NPs. We find that the solid solution Ir-Pd-Ru NPs (∼5.6 nm) evolved into a Pd-enriched shell supported on an alloyed Ir-Ru-rich core, most notably when the temperature exceeds 500 °C, concurrently with the development of expansive atomic strain in the outer surface and subsurface layers with respect to the core regions. Theoretically, we identify the weak interatomic bonds, low surface energy, and large atomic sizes associated with Pd as the key factors responsible for such observed features.

Subpercent Local Strains Due to the Shapes of Gold Nanorods Revealed by Data-Driven Analysis.

Analysis of subpercent local strain is important for a deeper understanding of nanomaterials, whose properties often depend on the strain. Conventional strain analysis has been performed by measuring interatomic distances from scanning transmission electron microscopy (STEM) images. However, measuring subpercent strain remains a challenge because the peak positions in STEM images do not precisely correspond to the real atomic positions due to disturbing influences, such as random noise and image distortion. Here, we utilized an advanced data-driven analysis method, Gaussian process regression, to predict the true strain distribution by reconstructing the true atomic positions. As a result, a precision of 0.2% was achieved in strain measurement at the atomic scale. The method was applied to gold nanoparticles of different shapes to reveal the shape dependence of the strain distribution. A spherical gold nanoparticle showed a symmetric strain distribution with a contraction of ∼1% near the surface owing to surface relaxation. By contrast, a gold nanorod, which is a cylinder terminated by hemispherical caps on both sides, showed nonuniform strain distributions with lattice expansions of ∼0.5% along the longitudinal axis around the caps except for the contraction at the surface. Our results indicate that the strain distribution depends on the shape of the nanomaterials. The proposed data-driven analysis is a convenient and powerful tool to measure the strain distribution with high precision at the atomic scale.

One-Pot Synthesis of PtNi Alloy Nanoparticle-Supported Multiwalled Carbon Nanotubes in an Ionic Liquid Using a Staircase Heating Process.

High-performance PtNi alloy nanoparticle-supported multiwalled carbon nanotube composite (PtNi/MWCNT) electrocatalysts can be prepared via one-pot preparation for oxygen reduction reaction. This route of preparation utilizes the pyrolytic decomposition of metal precursors, such as Pt(acac)2 with Ni precursors, nickel bis(trifluoromethanesulfonyl)amide (Ni[Tf2N]2) or nickel acetylacetonate (Ni(acac)2), in an ionic liquid (IL), N,N,N-trimethyl-N-propylammonium bis(trifluoromethanesulfonyl)amide ([N1,1,1,3][Tf2N]). Currently, there is insufficient information concerning the effect of difference in preparation conditions on the formation mechanism and catalytic activity of PtNi/MWCNT. In this article, a staircase heating process was used to investigate the PtNi alloy nanoparticle formation mechanism and catalytic activity of the resulting PtNi/MWCNT. We found that the alloy formation process, composition, and crystal structure, which directly affect the electrocatalytic activity, strongly depended on the Ni precursor species and heating process. The catalytic performance of certain PtNi/MWCNTs collected during the staircase heating process was better than that of PtNi/MWCNTs produced via the conventional heating process.

The Effects of Trace Sb and Zn Additions on Cu6Sn5 Lithium-Ion Battery Anodes.

Sn-based compounds are promising candidates for application as anodes in lithium-ion batteries (LIBs) due to the favourable storage capacity of Sn at 993 mAh g-1 compared to carbon at 372 mAh g-1. The use of Sn-based anodes also avoids some of the safety concerns associated with carbon anodes. However, the large volume changes during lithiation and delithiation of pure Sn anodes often results in poor cyclic performance. Alloying Sn with Cu, an element inactive with respect to Li, buffers the expansion stresses and can improve cycling performance. Cu6Sn5 is therefore a promising candidate anode material. In this work, the effects of Sb and Zn additions on the morphology, crystal structure, atomic arrangements and the electrochemical performance of the anodes were evaluated. Characterisation with synchrotron X-ray powder diffraction and Cs-corrected transmission electron microscopy revealed the larger lattice parameters, higher symmetry crystal structures and well-ordered atomic arrangements in the Sb and Zn modified electrodes, which resulted in a more than 50% increase in cycling capacity from 490 mAh g-1 to 760 mAh g-1.

Sequential transmission electron microscopy observation of the shape change of gold nanorods under pulsed laser light irradiation.

In situ sequential high-resolution observations were performed on gold nanorods under near-infra-red pulsed laser irradiation using a high-voltage electron microscope attached to a pulsed laser illumination system. The original nanorods were single crystals; the longer axes were oriented along [001]. Under laser light irradiation with λ = 1064 nm with an average intensity per pulse of 980 or 490 J/m2, the shape of the nanorods changed from rod to barrel surrounded by the {111} and {001} facets, while the original single-crystalline structure was maintained. The side surfaces with <110> direction were reconstructed into zig-zag fine structures consisting of narrow {111} facets. The temporal evolution of the volume and surface area during irradiation was evaluated based on the images, assuming that the particles have a rotational symmetry along their longer axes. The surface area was stepwise decreased during the shape change using pulse shots of 980 J/m2 while the volume was maintained. On the other hand, several repeated shots were required to induce the shape change when the averaged intensity was reduced to 490 J/m2 per pulse. In addition to the surface area, the volume was reduced under the latter condition during the shape change due to the evaporation of atoms. The quantitative analysis of the temporal changes indicates the heterogeneity of the atomic excitation or heating of gold nanorods induced by pulsed laser illumination.

Atomic Insights into Phase Evolution in Ternary Transition-Metal Dichalcogenides Nanostructures.

Phase engineering through chemical modification can significantly alter the properties of transition-metal dichalcogenides, and allow the design of many novel electronic, photonic, and optoelectronics devices. The atomic-scale mechanism underlying such phase engineering is still intensively investigated but elusive. Here, advanced electron microscopy, combined with density functional theory calculations, is used to understand the phase evolution (hexagonal 2H→monoclinic T'→orthorhombic Td ) in chemical vapor deposition grown Mo1-x W x Te2 nanostructures. Atomic-resolution imaging and electron diffraction indicate that Mo1-x W x Te2 nanostructures have two phases: the pure monoclinic phase in low W-concentrated (0 < x ≤ 10 at.%) samples, and the dual phase of the monoclinic and orthorhombic in high W-concentrated (10 < x < 90 at.%) samples. Such phase coexistence exists with coherent interfaces, mediated by a newly uncovered orthorhombic phase Td '. Td ', preserves the centrosymmetry of T' and provides the possible phase transition path for T'→Td with low energy state. This work enriches the atomic-scale understanding of phase evolution and coexistence in multinary compounds, and paves the way for device applications of new transition-metal dichalcogenides phases and heterostructures.

Detection of picometer-order atomic displacements in drift-compensated HAADF-STEM images of gold nanorods.

Cs-corrected atomic resolution scanning transmission electron microscopy under a drift-compensated operation enabled us to acquire high-angle annular dark-field (HAADF) images of entire gold nanorods without distortion induced by specimen drift. The precision in locating the atomic columns was evaluated to be ±5 pm in the images thus obtained, which is comparable to the image pixel size. A high-precision HAADF image of a single-crystalline gold nanorod revealed that the tip portions at both ends tended to undergo outward displacements along the rod axis and inward contraction along the perpendicular direction. A single nanosecond pulse shot of laser light with a wavelength of 1064 nm and an average intensity of 7.3 kJ/m2 pulse deformed the nanorods into spherical shapes. Simultaneously, the particle interior was completely changed into a multiple twin structure. Substantial displacements of atomic columns on the order of several tens of picometers were confirmed to be localized in the corners of domains at multiple twin junctions. Both the magnitude and direction of displacements were linearly relaxed with increasing distance from a multiple junction.