ABSTRACT
This review is aimed at researchers in air pollution control seeking to understand the latest advancements in volatile organic compound (VOC) removal. Implementing of plasma-catalysis technology for the removal of volatile organic compounds (VOCs) led to a significant boost in terms of degradation yield and mineralization rate with low by-product formation. The plasma-catalysis combination can be used in two distinct ways: (I) the catalyst is positioned downstream of the plasma discharge, known as the "post plasma catalysis configuration" (PPC), and (II) the catalyst is located in the plasma zone and exposed directly to the discharge, called "in plasma catalysis configuration" (IPC). Coupling these two technologies, especially for VOCs elimination has attracted the interest of many researchers in recent years. The term "synergy" is widely reported in their works and associated with the positive effect of the plasma catalysis combination. This review paper investigates the state of the art of newly published papers about catalysis, photocatalysis, non-thermal plasma, and their combination for VOC removal application. The focus is on understanding different synergy sources operating mutually between plasma and catalysis discussed and classified into two main parts: the effect of the plasma discharge on the catalyst and the effect of the catalyst on plasma discharge. This approach has the potential for application in air purification systems for industrial processes or indoor environments.
Subject(s)
Air Pollutants , Plasma Gases , Volatile Organic Compounds , Volatile Organic Compounds/chemistry , Catalysis , Plasma Gases/chemistry , Air Pollutants/chemistry , Air Pollutants/analysis , Air Pollution/prevention & controlABSTRACT
Sillenite materials have been the subject of intense investigation for recent years due to their unique characteristics. They possess a distinct structure with space group I23, allowing them to exhibit distinctive features, such as an electronic structure ideal for certain applications such as photocatalysis. The present research delves into the structure, synthesis, and properties of sillenites, highlighting their suitability for photocatalysis. It explores also advanced engineering strategies for designing sillenite-based photocatalysts, including heterojunction formation, morphology modification, doping, and hybrid processes. Each strategy offers advantages and limitations that are critically discussed. The review then lists and discusses the photocatalytic performance of various sillenite-based systems recently developed for common applications, such as removing hazardous organic and inorganic contaminants, and even infrequent applications, such as microbial inactivation, H2 generation, CO2 reduction and N2 fixation. Finally, valuable insights and suggestions are put forward for future research directions in the field of sillenite-based photocatalysis. This comprehensive overview would provide a valuable resource for the development of efficient photocatalytic systems to address environmental and energy challenges.
ABSTRACT
Enteroviruses (EVs) represent a major cause of viral meningitis, being responsible for nearly 1 billion infections each year worldwide. Several techniques were developed to obtain better diagnostic results of EV infections. Herein, we evaluated the efficiency of EV detection through isolation on both Rhabdomyosarcoma (RD) and Vero cell line cultures, conventional reverse transcription-polymerase chain reaction (RT-PCR) and real-time RT-PCR. Thus, 50 cerebrospinal fluid (CSF) samples belonging to patients suspected to have viral meningitis in northern Algeria were collected, anonymously numbered from 1 to 50 and subjected to the above-mentioned techniques for EV detection. Using real-time RT-PCR, 34 CSF samples were revealed to be positive for viral origin of meningitis (68%). Thirteen of them were positive when the conventional RT-PCR was used (26%), and only three samples gave positive results when the cell culture technique was used (6%). Surprisingly, two cell culture-positive CSF samples, namely, 31 and 39, were negative using RT-PCR directly on the original samples. However, they turned to be positive when amplification was carried out on their corresponding cell culture supernatant. The cell-cultured viral isolates were then identified by sequencing their viral genome's VP1 regions. All of them were revealed to belong to the echovirus 27 strain. This investigation demonstrates that RT-PCR techniques are often more sensitive, accurate and much faster, providing reliable results within a clinically acceptable timeframe. However, viral isolation on cell cultures remains crucial to obtain enough viral load for serological tests or even to avoid the rare, but existing, false negative PCR.
Subject(s)
Enterovirus Infections , Enterovirus , Meningitis, Viral , Animals , Chlorocebus aethiops , Humans , RNA, Viral/analysis , Enterovirus/genetics , Meningitis, Viral/diagnosis , Vero Cells , Antigens, Viral , Reverse Transcriptase Polymerase Chain ReactionABSTRACT
This study investigates the pilot-scale combination of nonthermal plasma and photocatalysis for removing Toluene and dimethyl sulfur (DMDS), examining the influence of plasma energy and initial pollutant concentration on the performance and by-product formation in both pure compounds and mixtures. The results indicate a consistent 15% synergy effect, improving Toluene conversion rates compared to single systems. Ozone reduction and enhanced CO2 selectivity were observed when combining plasma and photocatalysis. This process effectively treats pollutant mixtures, even those containing sulfur compounds. Furthermore, tests confirm nonthermal plasma's in-situ regeneration of the photocatalytic surface, providing a constant synergy effect.
ABSTRACT
This work aimed to formulate xanthan gum microspheres for the encapsulation of metformin hydrochloride, according to the process of ionotropic gelation. The obtained microparticles, based on various fractions of xanthan gum (0.5-1.25), were subjected to different physico-chemical tests and a drug release study. Microspheres with an average size varying between 110.96 µm and 208.27 µm were obtained. Encapsulation efficiency reached 93.11% at a 1.25% biopolymer concentration. The swelling study showed a swelling rate reaching 29.8% in the gastric medium (pH 1.2) and 360% in the intestinal medium (pH 6.8). The drug release studies showed complete metformin hydrochloride release from the beads, especially those prepared from xanthan gum at the concentration of 1.25%, in intestinal medium at 90.00% after 6 h. However, limited and insignificant drug release was observed within the gastric medium (32.50%). The dissolution profiles showed sustained release kinetics.
ABSTRACT
Photocatalytic oxidation (PCO) using a TiO2 catalyst is an effective technique to remove gaseous volatile organic compounds (VOCs). Herein, a lab-scale continuous reactor is used to investigate the photocatalytic performance toward ethylbenzene (EB) vapor removal over TiO2 nanoparticles immobilized on glass fiber tissue. The role of the reactive species in the removal of EB and the degradation pathway were studied. Firstly, the effect of key operating parameters such as EB concentration (13, 26, 60 mg/m3), relative humidity levels (From 5 to 80%), gas carrier composition (dry air + EB, O2 + EB and N2 + EB) and ultraviolet (UV) radiation wavelength (UV-A 365 nm, UV-C 254 nm) were explored. Then, using superoxide dismutase and tert-butanol as trapping agents, the real contribution of superoxide radical anion (O2.-) and hydroxyl radicals (OH.) to EB removal was quantified. The results show that (i) small water vapor content enhances the EB degradation; (ii) the reaction atmosphere plays an important role in the photocatalytic process; and (iii) oxygen atmosphere/UV-C radiation shows the highest EB degradation percentage. The use of radical scavengers confirms the major contribution of the hydroxyl radical to the photocatalytic mechanism with 75% versus 25% for superoxide radical anion.
Subject(s)
Nanoparticles , Superoxides , Reactive Oxygen Species , Gases , Titanium , Ultraviolet Rays , CatalysisABSTRACT
In many nations, particularly those experiencing water scarcity, novel approaches are being applied to clean wastewater. Heterogeneous photocatalysis is the most widely used of these approaches because it entails the decomposition of organic molecules into water and carbon dioxide, which is a more ecologically benign process. In our study, we studied the photocatalytic degradation process on the effluent flumequine. This treatment is made through a solar pilot reactor in the presence of immobilized titanium dioxide with three light intensities and two types of water as solvents. A variety of factors that might influence the rate of deterioration, such as flow rate, light intensity, and initial concentration, have been investigated. The maximal degradation of flumequine was achieved at more than 90% after 2.5 h under optimal conditions (an initial concentration of 5 mg/L, three lamp light intensities, and a flow rate of 29 L/h). By combining the oxidized agent H2O2 with this process, the photocatalytic activity was improved further to 97% under the same conditions. The mineralization of this product has also been tested using total organic carbon (TOC) analysis. A high mineralization rate has been recorded at around 50% for a high initial concentration (20 mg/L) at a flow rate of 126 L/h. The results demonstrated the highly effective removal of flumequine and the efficacy of this photocatalytic system.
ABSTRACT
In this work, we present the influence of the decoration of TiO2 nanotubes (TiO2-NTs) with Ag silver nanoparticles (Ag-NPs) on the photocatalysis of emerging pollutants such as the antibiotic diclofenac sodium. The Ag-NPs were loaded onto the TiO2-NTs by the anodization of metallic titanium foils. Diclofenac sodium is an emerging pollutant target of the pharmaceutical industry because of its negative environmental impact (high toxicity and confirmed carcinogenicity). The obtained Ag-NP/TiO2-NT nanocomposites were characterized by X-ray diffraction (XRD), photoluminescence spectroscopy (PL), scanning electron microscopy (SEM), transmission spectroscopy (TEM), and X-ray photoelectron spectroscopy (XPS). In order to study the photocatalytic behavior of Ag-NPs/TiO2-NTs with visible cold LEDs, the possible photocatalytic mechanism of antibiotic degradation with reactive species (O2°- and OH°) was detailed. Moreover, the Langmuir-Hinshelwood model was used to correlate the experimental results with the optimized catalyst. Likewise, reuse tests showed the chemical stability of the catalyst.
ABSTRACT
In this work, a solution for the treatment of toxic gases based on a photocatalytic process using TiO2 coated on a cellulosic support, has been investigated. Here, cyclohexane was chosen as the reference for testing its removal efficiency via a continuous front flow reactor as type A anti-gas filters. The photocatalytic support was firstly characterized by EDX, to confirm its elemental composition. Then, the experiments were carried out, starting with a batch reactor in order to evaluate the degradation efficiency of the photocatalytic media, as well as the monitoring of the photocatalytic process which allowed the establishing of a carbon mass balance corresponding to the stoichiometric number of our target pollutant. The transition to a continuous treatment with a front flow reactor aims to highlight the influence of the input concentration (0.29-1.78 mM m-3) under different flow rates (12, 18 and 36 L min-1). The relative humidity effect was also investigated (from 5 to 90% of humidity) where an optimum rate was obtained around 35-45%. In addition, the mineralization rate was monitored. The major rates obtained were for a cyclohexane input concentration of 0.29 mM m-3 in wet condition (38%) at an air flow rate of 18 L min-1, where the CO2 selectivity reached 77% for an abatement of 62%. In order to understand the limiting steps of the photocatalytic process, a model considering the reactor geometry and the hydraulic flow was developed. The obtained results showed that the mass transfer must be considered in the photocatalytic process for a continuous treatment. The Langmuir-Hinshelwood bimolecular model was also developed to represent the influence of the humidity.
Subject(s)
Environmental Pollutants , Titanium , CatalysisABSTRACT
CoBi2O4 (CBO) nanoparticles were synthesized by sol-gel method using polyvinylpyrrolidone (PVP) as a complexing reagent. For a single phase with the spinel structure, the formed gel was dried and calcined at four temperatures stages. Various methods were used to identify and characterize the obtained spinel, such as X-ray diffraction (XRD), scanning electron micrograph (SEM-EDX), transmission electron microscope (TEM), Fourier transform infrared (FT-IR), X-ray fluorescence (XRF), Raman, and UV-Vis spectroscopies. The photocatalytic activity of CBO was examined for the degradation of a pharmaceutical product cefixime (CFX). Furthermore, for the prediction of the CFX degradation rate, an artificial neural network model was used. The network was trained using the experimental data obtained at different pH with different CBO doses and initial CFX concentrations. To optimize the network, various algorithms and transfer functions for the hidden layer were tested. By calculating the mean square error (MSE), 13 neurons were found to be the optimal number of neurons and produced the highest coefficient of correlation R2 of 99.6%. The relative significance of the input variables was calculated, and the most impacting input was proved to be the initial CFX concentration. The effects of some scavenging agents were also studied. The results confirmed the dominant role of hydroxyl radical OH⢠in the degradation process. With the novel CoBi2O4/ZnO hetero-system, the photocatalytic performance has been enhanced, giving an 80% degradation yield of CFX (10 mg/L) at neutral pH in only 3 h.
Subject(s)
Nanoparticles , Zinc Oxide , Catalysis , Cefixime , Neural Networks, Computer , Photolysis , Spectroscopy, Fourier Transform InfraredABSTRACT
The heterogeneous photocatalysis process has been known to provide significant levels of degradation and mineralization of emerging contaminants including antibiotics. For that, nanoparticle CuCr2O4 (CCO) ceramics were successfully prepared via sol-gel (SG) and co-precipitation (CP) methods to obtain spinel with desired structural features and properties and also to improve the photocatalytic performances. The CCO crystallite phase was produced at 750 °C all ceramics, disregarding the synthesis route. CCO physical and chemical properties were checked by X-ray diffraction (XRD) with Rietveld refinement, Brunauer-Emmett-Teller (BET), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), transmission electron microscope (TEM), and diffuse reflectance solid (DRS). The XRD patterns demonstrated that the synthesized catalysts displayed a small crystallite size between 17.45 and 26.24 nm for SG and 20.97 and 36.86 nm for the CCOCP samples. The observation by SEM and TEM of the nanopowders showed a typical morphology with comparable particle sizes for both synthesized routes (20-30 nm). SG agglomeration rates were higher, and particles stick together more efficiently considering the CP method, while the CCOCP method led to a more significant porosity. Their photocatalytic and adsorption performances were examined for cefaclor (CFC) removal chosen as a target pharmaceutical contaminant in water. The results obtained by the methods differed since nanoparticles prepared by SG led to high photocatalytic activity. In contrast, a high CFC adsorption was observed for those prepared via the CP method, and that agreed with the findings of the characterization analysis. The kinetics of the adsorption process was found to follow the pseudo-second-order rate law. In contrast, the data of the photodegradation process were further found to comply with the Lagergren kinetic law. Nevertheless, the global reaction rate is probably controlled by the intra-particular diffusion of CFC, regardless of the elimination process.
Subject(s)
Anti-Bacterial Agents , Nanoparticles , Catalysis , Ceramics , Microscopy, Electron, Scanning , Spectroscopy, Fourier Transform InfraredABSTRACT
In this study, a novel peroxymonosulfate (PMS) activation method, which combines a solid waste (i.e., red mud, RM) and a reducing agent (i.e., hydroxylamine, HA), for the oxidative degradation of fluoroquinolones (FQs; i.e., flumequine (FLU) and ciprofloxacin (CIP)) in hospital wastewater (HW) was developed. The addition of HA into the PMS/RM suspension significantly enhanced FLU removal, owing to its ability to enhance the Fe(III)/Fe(II) cycle on the RM surface. The results of the quenching experiments suggested the predominance of SO4â¢- over â¢OH in the PMS/RM/HA system. Moreover, owing to the greater reactivity between CIP and SO4â¢-, CIP removal was more effective than FLU removal. Additionally, the liquid chromatography-mass spectroscopy (LC-MS) analysis revealed that the oxidation of CIP and FLU by PMS/RM/HA occurred via sequential and separate processes, involving ring cleavage, hydroxylation, decarbonylation, and defluorination. Surprisingly, the wastewater components exhibited contrasting effects on FLU removal in HW. Natural organic matter, nitrate and sulfate showed a slight impact on the removal performance of FLU, whereas chloride improved the oxidation extent. However, phosphate significantly inhibited the FLU removal because of its competitive binding at the RM surface and its scavenging effect towards SO4â¢-. This inhibitory effect was overcome by increasing the PMS concentration and its sequential addition, thus guaranteeing successful mineralization of FLU in HW. These results show that the RM/HA system can be utilized to activate PMS for the removal of antibiotics in wastewater.
Subject(s)
Wastewater , Water Pollutants, Chemical , Ferric Compounds , Fluoroquinolones , Oxidation-Reduction , Peroxides , Water Pollutants, Chemical/analysisABSTRACT
In order to mineralize Metronidazole (MTZ), a process coupling an electro-Fenton pretreatment and a biological degradation was implemented. A mono-compartment batch reactor containing a carbon-felt cathode and a platinum anode was employed to carry out the electro-Fenton pretreatment of MTZ. A total degradation of MTZ (100â¯mgâ¯L-1) was observed at 0.07â¯mA.cm-2 after only 20â¯min of electrolysis. Yet, after 1 and 2â¯h of electrolysis, the mineralization level remained low (16.2% and 32% respectively), guaranteeing a significant residual organic content for further biological treatment. LCMS/MS was used to determine the intermediates by-products and hence to propose a plausible degradation pathway. An increase from 0 to 0.44 and 0.6 for 1 and 2â¯h of electrolysis was observed for the BOD5/COD ratio. Thus, from 1â¯h of electro-Fenton pretreatment, the electrolysis by-products were considered biodegradable. A biological treatment of the electrolysis by-products after 1 and 2â¯h was then realized. The mineralization yields reached very close values, about 84% for 1 and 2â¯h of electrolysis after 504â¯h of biological treatment, namely close to 89% for the overall process, showing the pertinence of the proposed coupled process.
Subject(s)
Anti-Bacterial Agents , Metronidazole , Water Pollutants, Chemical , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/metabolism , Anti-Bacterial Agents/toxicity , Biodegradation, Environmental , Biological Oxygen Demand Analysis , Electrolysis , Iron/chemistry , Lepidium/drug effects , Lepidium/growth & development , Metronidazole/chemistry , Metronidazole/metabolism , Metronidazole/toxicity , Sewage , Water Pollutants, Chemical/chemistry , Water Pollutants, Chemical/metabolism , Water Pollutants, Chemical/toxicity , Water Purification/methodsABSTRACT
In this study, the monitoring of reactive oxygen species and the regeneration of the ferrous ions catalyst were performed during electro-Fenton (EF) process to highlight the influence of operating parameters. The removal of metronidazole (MTZ) was implemented in an electrochemical mono-compartment batch reactor under various ranges of current densities, initial MTZ and ferrous ions concentrations, and pH values. It was found that under 0.07â¯mAâ¯cm-2, 0.1â¯mM of ferrous ions and pHâ¯=â¯3, the efficiency of 100â¯mgâ¯L-1 MTZ degradation and mineralization were 100% within 20â¯min and 40% within 135â¯min of electrolysis, respectively. The highest hydrogen peroxide and hydroxyl radical concentrations, 1.4â¯mM and 2.28â¯mM respectively, were obtained at 60â¯min electrolysis at 0.07â¯mAâ¯cm-2. Improvement of the biodegradability was reached from 60â¯min of electrolysis with a BOD5/COD ratio above 0.4, which was reinforced by a respirometric study, that supports the feasibility of coupling electro-Fenton and biological treatment for the metronidazole removal.
Subject(s)
Electrolysis , Hydrogen Peroxide/chemistry , Iron/analysis , Metronidazole/chemistry , Oxygen/analysis , Biodegradation, Environmental , Biological Oxygen Demand Analysis , Hydroxyl Radical , Metronidazole/metabolism , Oxidation-Reduction , Water Pollutants, Chemical/chemistry , Water Pollutants, Chemical/metabolismABSTRACT
Although there is a growing interest in Fenton oxidation processes based on natural catalysts, the use of laterite soil to promote sequential adsorption/oxidation treatments of fluoroquinolone antibiotics has been scarcely investigated. In this work, the ability of an african laterite containing goethite and hematite to remove flumequine (FLU), used as a representative compound of fluoroquinolone antibiotics, was evaluated under dark and UVA irradiation. Batch experiments and liquid chromatography analyses showed that the presence of laterite can enhance FLU removal from heavily contaminated water through both sorption and oxidation reactions (up to 94% removal of 77⯵molâ¯L-1 of FLU and 72% of mineralization). The heterogeneous reaction rate is dominated by the rate of intrinsic surface chemical reactions including sorption and oxidation of FLU, and light-induced reduction of FeIII sites to produce FeII. Based on the probe and scavenging experiments, OH radicals were mainly involved in the heterogeneous oxidation reaction. The photo-assisted Fenton process showed a high efficiency of FLU removal even in the presence of a second fluoroquinolone antibiotic, norfloxacin (NOR), which can be co-found with FLU in affected environments. Determinations of kinetic rate constants and total organic carbon (TOC) for five sequential adsorption/oxidation cycles showed that laterite exhibited no deactivation of surface sites and an excellent catalytic stability. This cost-effective and environmentally friendly remediation technology may appear as a promising way for the removal of fluoroquinolone antibiotics from multi-contaminated waters.