Nondestructive testing of native and tissue-engineered medical products: adding numbers to pictures.

Traditional destructive tests are used for quality assurance and control within manufacturing workflows. Their applicability to biomanufacturing is limited due to inherent constraints of the biomanufacturing process. To address this, photo- and acoustic-based nondestructive testing has risen in prominence to interrogate not only structure and function, but also to integrate quantitative measurements of biochemical composition to cross-correlate structural, compositional, and functional variances. We survey relevant literature related to single-mode and multimodal nondestructive testing of soft tissues, which adds numbers (quantitative measurements) to pictures (qualitative data). Native and tissue-engineered articular cartilage is highlighted because active biomanufacturing processes are being developed. Included are recent efforts and prominent trends focused on technologies for clinical and in-process biomanufacturing applications.

Shear stress induced by fluid flow produces improvements in tissue-engineered cartilage.

Tissue engineering aims to create implantable biomaterials for the repair and regeneration of damaged tissues. In vitro tissue engineering is generally based on static culture, which limits access to nutrients and lacks mechanical signaling. Using shear stress is controversial because in some cases it can lead to cell death while in others it promotes tissue regeneration. To understand how shear stress works and how it may be used to improve neotissue function, a series of studies were performed. First, a tunable device was designed to determine optimal levels of shear stress for neotissue formation. Then, computational fluid dynamics modeling showed the device applies fluid-induced shear (FIS) stress spanning three orders of magnitude on tissue-engineered cartilage (neocartilage). A beneficial window of FIS stress was subsequently identified, resulting in up to 3.6-fold improvements in mechanical properties of neocartilage in vitro. In vivo, neocartilage matured as evidenced by the doubling of collagen content toward native values. Translation of FIS stress to human derived neocartilage was then demonstrated, yielding analogous improvements in mechanical properties, such as 168% increase in tensile modulus. To gain an understanding of the beneficial roles of FIS stress, a mechanistic study was performed revealing a mechanically gated complex on the primary cilia of chondrocytes that is activated by FIS stress. This series of studies places FIS stress into the arena as a meaningful mechanical stimulation strategy for creating robust and translatable neotissues, and demonstrates the ease of incorporating FIS stress in tissue culture.

Nondestructive fluorescence lifetime imaging and time-resolved fluorescence spectroscopy detect cartilage matrix depletion and correlate with mechanical properties.

Tissue engineers utilize a battery of expensive, time-consuming and destructive techniques to assess the composition and function of engineered tissues. A nondestructive solution to monitor tissue maturation would reduce costs and accelerate product development. As a first step toward this goal, two nondestructive, label-free optical techniques, namely multispectral fluorescent lifetime imaging (FLIm) and time-resolved fluorescence spectroscopy (TRFS), were investigated for their potential in evaluating the biochemical and mechanical properties of articular cartilage. Enzymatic treatments were utilized to selectively deplete cartilage of either collagen or proteoglycan, to produce a range of matrix compositions. Samples were assessed for their optical properties using a fiber-coupled optical system combining FLIm and TRFS, their biochemical and mechanical properties and by histological staining. Single and multivariable correlations were performed to evaluate relationships among these properties. FLIm- and TRFS-derived measurements are sensitive to changes in cartilage matrix and correlate with mechanical and biochemical assays. Mean fluorescence lifetime values extracted from FLIm images (375-410 nm spectral band) showed strong, specific correlations with collagen content (R2 = 0.79, p < 0.001) and tensile properties (R2 = 0.45, p = 0.02). TRFS lifetime measurements centered at 520 nm (with a 5 nm bandwidth) possessed strong, specific correlations with proteoglycan content (R2 = 0.59, p = 0.001) and compressive properties (R2 = 0.71, p < 0.001). Nondestructive optical assessment of articular cartilage, using a combination of FLIm- and TRFS-derived parameters, provided a quantitative method for determining tissue biochemical composition and mechanical function. These tools hold great potential for research, industrial and clinical settings.

Biochemical and biomechanical characterisation of equine cervical facet joint cartilage.

BACKGROUND: The equine cervical facet joint is a site of significant pathology. Located bilaterally on the dorsal spine, these diarthrodial joints work in conjunction with the intervertebral disc to facilitate appropriate spinal motion. Despite the high prevalence of pathology in this joint, the facet joint is understudied and thus lacking in viable treatment options. OBJECTIVE: The goal of this study was to characterise equine facet joint cartilage and provide a comprehensive database describing the morphological, histological, biochemical and biomechanical properties of this tissue. STUDY DESIGN: Descriptive cadaver studies. METHODS: A total of 132 facet joint surfaces were harvested from the cervical spines of six skeletally mature horses (11 surfaces per animal) for compiling biomechanical and biochemical properties of hyaline cartilage of the equine cervical facet joints. Gross morphometric measurements and histological staining were performed on facet joint cartilage. Creep indentation and uniaxial strain-to-failure testing were used to determine the biomechanical compressive and tensile properties. Biochemical assays included quantification of total collagen, sulfated glycosaminoglycan and DNA content. RESULTS: The facet joint surfaces were ovoid in shape with a flat articular surface. Histological analyses highlighted structures akin to articular cartilage of other synovial joints. In general, biomechanical and biochemical properties did not differ significantly between the inferior and superior joint surfaces as well as among spinal levels. Interestingly, compressive and tensile properties of cervical facet articular cartilage were lower than those of articular cartilage from other previously characterised equine joints. Removal of the superficial zone reduced the tissue's tensile strength, suggesting that this zone is important for the tensile integrity of the tissue. MAIN LIMITATIONS: Facet surfaces were sampled at a single, central location and do not capture the potential topographic variation in cartilage properties. CONCLUSIONS: This is the first study to report the properties of equine cervical facet joint cartilage and may serve as the foundation for the development of future tissue-engineered replacements as well as other treatment strategies.

Tendon and ligament as novel cell sources for engineering the knee meniscus.

OBJECTIVE: The application of cell-based therapies in regenerative medicine is hindered by the difficulty of acquiring adequate numbers of competent cells. For the knee meniscus in particular, this may be solved by harvesting tissue from neighboring tendons and ligaments. In this study, we have investigated the potential of cells from tendon and ligament, as compared to meniscus cells, to engineer scaffold-free self-assembling fibrocartilage. METHOD: Self-assembling meniscus-shaped constructs engineered from a co-culture of articular chondrocytes and either meniscus, tendon, or ligament cells were cultured for 4 weeks with TGF-ß1 in serum-free media. After culture, constructs were assessed for their mechanical properties, histological staining, gross appearance, and biochemical composition including cross-link content. Correlations were performed to evaluate relationships between biochemical content and mechanical properties. RESULTS: In terms of mechanical properties as well as biochemical content, constructs engineered using tenocytes and ligament fibrocytes were found to be equivalent or superior to constructs engineered using meniscus cells. Furthermore, cross-link content was found to be correlated with engineered tissue tensile properties. CONCLUSION: Tenocytes and ligament fibrocytes represent viable cell sources for engineering meniscus fibrocartilage using the self-assembling process. Due to greater cross-link content, fibrocartilage engineered with tenocytes and ligament fibrocytes may maintain greater tensile properties than fibrocartilage engineered with meniscus cells.

Inhibition of CDK9 prevents mechanical injury-induced inflammation, apoptosis and matrix degradation in cartilage explants.

Joint injury often leads to post-traumatic osteoarthritis (PTOA). Acute injury responses to trauma induce production of pro-inflammatory cytokines and catabolic enzymes, which promote chondrocyte apoptosis and degrade cartilage to potentiate PTOA development. Recent studies show that the rate-limiting step for transcriptional activation of injury response genes is controlled by cyclin-dependent kinase 9 (CDK9), and thus it is an attractive target for limiting the injury response. Here, we determined the effects of CDK9 inhibition in suppressing the injury response in mechanically-injured cartilage explants. Bovine cartilage explants were injured by a single compressive load of 30 % strain at 100 %/s, and then treated with the CDK9 inhibitor Flavopiridol. To assess acute injury responses, we measured the mRNA expression of pro-inflammatory cytokines, catabolic enzymes, and apoptotic genes by RT-PCR, and chondrocyte viability and apoptosis by TUNEL staining. For long-term outcome, cartilage matrix degradation was assessed by soluble glycosaminoglycan release, and by determining the mechanical properties with instantaneous and relaxation moduli. Our data showed CDK9 inhibitor markedly reduced injury-induced inflammatory cytokine and catabolic gene expression. CDK9 inhibitor also attenuated chondrocyte apoptosis and reduced cartilage matrix degradation. Lastly, the mechanical properties of the injured explants were preserved by CDK9 inhibitor. Our results provide a temporal profile connecting the chain of events from mechanical impact, acute injury responses, to the subsequent induction of chondrocyte apoptosis and cartilage matrix deterioration. Thus, CDK9 is a potential disease-modifying agent for injury response after knee trauma to prevent or delay PTOA development.

Cartilage immunoprivilege depends on donor source and lesion location.

The ability to repair damaged cartilage is a major goal of musculoskeletal tissue engineering. Allogeneic (same species, different individual) or xenogeneic (different species) sources can provide an attractive source of chondrocytes for cartilage tissue engineering, since autologous (same individual) cells are scarce. Immune rejection of non-autologous hyaline articular cartilage has seldom been considered due to the popular notion of "cartilage immunoprivilege". The objective of this study was to determine the suitability of allogeneic and xenogeneic engineered neocartilage tissue for cartilage repair. To address this, scaffold-free tissue engineered articular cartilage of syngeneic (same genetic background), allogeneic, and xenogeneic origin were implanted into two different locations of the rabbit knee (n=3 per group/location). Xenogeneic engineered cartilage and control xenogeneic chondral explants provoked profound innate inflammatory and adaptive cellular responses, regardless of transplant location. Cytological quantification of immune cells showed that, while allogeneic neocartilage elicited an immune response in the patella, negligible responses were observed when implanted into the trochlea; instead the responses were comparable to microfracture-treated empty defect controls. Allogeneic neocartilage survived within the trochlea implant site and demonstrated graft integration into the underlying bone. In conclusion, the knee joint cartilage does not represent an immune privileged site, strongly rejecting xenogeneic but not allogeneic chondrocytes in a location-dependent fashion. This difference in location-dependent survival of allogeneic tissue may be associated with proximity to the synovium. STATEMENT OF SIGNIFICANCE: Through a series of in vivo studies this research demonstrates that articular cartilage is not fully immunoprivileged. In addition, we now show that anatomical location of the defect, even within the same joint compartment, strongly influences the degree of the resultant immune response. This is one of the first investigations to show that (1) immune tolerance to allogeneic tissue engineered cartilage and (2) subsequent implant survival are dependent on the implant location and proximity to the synovium.

ERK activation is required for hydrostatic pressure-induced tensile changes in engineered articular cartilage.

The objective of this study was to identify ERK 1/2 involvement in the changes in compressive and tensile mechanical properties associated with hydrostatic pressure treatment of self-assembled cartilage constructs. In study 1, ERK 1/2 phosphorylation was detected by immunoblot, following application of hydrostatic pressure (1 h of static 10 MPa) applied at days 10-14 of self-assembly culture. In study 2, ERK 1/2 activation was blocked during hydrostatic pressure application on days 10-14. With pharmacological inhibition of the ERK pathway by the MEK1/ERK inhibitor U0126 during hydrostatic pressure application on days 10-14, the increase in Young's modulus induced by hydrostatic pressure was blocked. Furthermore, this reduction in Young's modulus with U0126 treatment during hydrostatic pressure application corresponded to a decrease in total collagen expression. However, U0126 did not inhibit the increase in aggregate modulus or GAG induced by hydrostatic pressure. These findings demonstrate a link between hydrostatic pressure application, ERK signalling and changes in the biomechanical properties of a tissue-engineered construct.

Biomechanical evaluation of suture-holding properties of native and tissue-engineered articular cartilage.

The purpose of this study was to determine suture-holding properties of tissue-engineered neocartilage relative to native articular cartilage. To this end, suture pull-out strength was quantified for native articular cartilage and for neocartilages possessing various mechanical properties. Suture-holding properties were examined in vitro and in vivo. Neocartilage from bovine chondrocytes was engineered using two sets of exogenous stimuli, resulting in neotissue of different biochemical compositions. Compressive and tensile properties and glycosaminoglycan, collagen, and pyridinoline cross-link contents were assayed (study 1). Suture pull-out strength was compared between neocartilage constructs, and bovine and leporine native cartilage. Uniaxial pull-out test until failure was performed after passing 6-0 Vicryl through each tissue (study 2). Subsequently, neocartilage was implanted into a rabbit model to examine short-term suture-holding ability in vivo (study 3). Neocartilage glycosaminoglycan and collagen content per wet weight reached 4.55 ± 1.62% and 4.21 ± 0.77%, respectively. Tensile properties for neocartilage constructs reached 2.6 ± 0.77% MPa for Young's modulus and 1.39 ± 0.63 MPa for ultimate tensile strength. Neocartilage reached ~ 33% of suture pull-out strength of native articular cartilage. Neocartilage cross-link content reached 50% of native values, and suture pull-out strength correlated positively with cross-link content (R² = 0.74). Neocartilage sutured into rabbit osteochondral defects was successfully maintained for 3 weeks. This study shows that pyridinoline cross-links in neocartilage may be vital in controlling suture pull-out strength. Neocartilage produced in vitro with one-third of native tissue pull-out strength appears sufficient for construct suturing and retention in vivo.

Characterization of degenerative changes in the temporomandibular joint of the bengal tiger (Panthera tigris tigris) and siberian tiger (Panthera tigris altaica).

The articulation of the temporomandibular joint (TMJ) is composed of the temporal bone dorsally, the mandibular condyle ventrally and a fibrous articular disc. The TMJ disc plays an essential role in distributing load between the two articular surfaces. Degeneration of the disc in the presence of joint pathology has been shown in man; however, TMJ pathology has not been documented previously in tigers (Panthera tigris). The mandibular condyle and TMJ disc of a Bengal tiger (P. tigris tigris) and a Siberian tiger (P. tigris altaica) were evaluated grossly and the TMJ disc was characterized biochemically and mechanically. Characterization of the TMJ disc verified region- and direction-dependent biochemical and mechanical properties, reflective of the functional demands on the joint. Degenerative joint disease was observed in both cases and this was more severe in the Siberian tiger. Simultaneous evaluation of joint pathology, biochemical composition and mechanical properties of the TMJ disc revealed a loss in functional properties (tensile anisotropy) of the disc as joint pathology advanced from moderate to severe. TMJ degeneration may compromise the ability of the animal to eat and thrive and may be a factor contributing to the endangered status of these species.

Tensile characterization of porcine temporomandibular joint disc attachments.

The frequency and impact of temporomandibular joint (TMJ) disorders necessitate research in characterizing the joint's function. The 6 discal attachments have not yet been systematically characterized under tension. Understanding their role in joint function may guide our study of TMJ pathologies, including disc displacement. In the present study, a porcine model was used to characterize the attachments in tension anteroposteriorly and mediolaterally, based on previously identified similarities in the porcine and human masticatory behaviors and discal properties. Tensile stiffness, strength, toughness, and maximum strain were quantified. Collagen alignment was characterized via polarized light and scanning electron microscopy. Anisotropy was demonstrated in all attachments, with the exception of the anterior inferior attachment. Anteroposteriorly, the lateral attachment was stiffest (8.3 MPa) and the anterior superior was least stiff (1.4 MPa). Mediolaterally, the posterior superior attachment was stiffest (16.3 MPa) and the medial was least stiff (1.4 MPa). The greatest strain was observed in the lateral attachment in the mediolateral direction and the posterior superior attachment in the anteroposterior direction. With greatest strains in the most commonly observed directions of disc displacement, it is suggested that compromise in the posterior and lateral attachments contributes to partial lateral and anterior disc displacement.

Hypoxia-induced collagen crosslinking as a mechanism for enhancing mechanical properties of engineered articular cartilage.

OBJECTIVE: The focus of tissue engineering of neocartilage has traditionally been on enhancing extracellular matrix and thus biomechanical properties. Emphasis has been placed on the enhancement of collagen type and quantity, and, concomitantly, tensile properties. The objective of this study was to improve crosslinking of the collagen network by testing the hypothesis that hypoxia could promote pyridinoline (PYR) crosslinks and, thus, improve neocartilage's tensile properties. METHODS: Chondrocyte expression of lysyl oxidase (LOX), an enzyme responsible for the formation of collagen PYR crosslinks, was first assessed pre- and post- hypoxia application. Then, the mechanical properties of self-assembled neocartilage constructs were measured, after 4 weeks of culture, for groups exposed to 4% O2 at different initiation times and durations, i.e., during the 1st and 3rd weeks, 3rd and 4th weeks, 4th week only, continuously after cell seeding, or never. RESULTS: Results showed that LOX gene expression was upregulated ∼20-fold in chondrocytes in response to hypoxia. Hypoxia applied during the 3rd and 4th weeks significantly increased PYR crosslinks without affecting collagen content. Excitingly, neocartilage tensile properties were increased ∼2-fold. It should be noted that these properties exhibited a distinct temporal dependence to hypoxia exposure, since upregulation of these properties was due to hypoxia applied only during the 3rd and 4th weeks. CONCLUSION: These data elucidate the role of hypoxia-mediated upregulation of LOX and subsequent increases in PYR crosslinks in engineered cartilage. These results hold promise toward applying hypoxia at precise time points to promote tensile integrity and direct construct maturation.

Public knowledge, beliefs and practices in Greece about cancer etiology and prevention.

This questionnaire survey of the parents of elementary schoolchildren in Greece assessed their self-reported knowledge, attitudes and practices towards smoking, diet and exposure to X-radiation. A random sample of 403 household units (379 fathers and 391 mothers) was selected from urban areas of Thessaloniki. Half of the parents who smoked (50.1%) did not ask for permission to smoke from other people and 66.0% regularly smoked in front of their children. On the other hand, 82.6% of smokers recognized the existence of a health risk to children from passive smoking. Parents overestimated the role of nuclear tests and accidents as factors in carcinogenesis. Two-thirds of parents did not know the beneficial role of the Mediterranean diet to health, and dietary intake analysis showed some departure from the traditional Mediterranean diet. A reconsideration of the policy regarding health education programmes concerning cancer prevention in Greece is needed.

Parecoxib sodium in the treatment of postoperative pain after Lichtenstein tension-free mesh inguinal hernia repair.

PURPOSE: This prospective, randomized, double-blind study compared the analgesic efficacy and safety of parecoxib sodium versus lornoxicam and diclofenac, after Lichtenstein tension-free mesh inguinal hernia repair. METHODS: Patients were randomly assigned to receive parecoxib 80 mg daily i.v. (Group A), lornoxicam 16 mg daily i.v. (Group B) or diclofenac 150 mg daily i.m. (Group C). Rescue analgesia in all groups consisted of pethidine 25 mg i.m. Pain was measured with an analogue scale (pain intensity score). RESULTS: Patients treated with parecoxib 80 mg reported significantly lower summed pain intensity scores compared with lornoxicam and diclofenac-treated patients. Duration of analgesia was also significantly longer with parecoxib than with lornoxicam and diclofenac. Adverse events were significantly less common in the parecoxib and lornoxicam group, compared with diclofenac group. CONCLUSIONS: Multiple-day administration of parecoxib 40 mg twice daily is more effective than equivalent doses of lornoxicam and diclofenac, and generally better tolerated than diclofenac after Lichtenstein tension-free mesh inguinal hernia repair.

An interspecies comparison of the temporomandibular joint disc.

The temporomandibular joint (TMJ) disc plays a critical role in normal function of the joint, and many disorders of the TMJ are a result of disc dysfunction. Previous quantitative TMJ characterization studies examined either the human or a specific animal model, but no single study has compared different species, in the belief that differences in joint morphology, function, and diet would be reflected in the material properties of the disc. In this study, we examined topographical biochemical (collagen, glycosaminoglycan, and DNA content) and biomechanical (tensile and compressive) properties of the human TMJ disc, and also discs from the cow, goat, pig, and rabbit. Regional and interspecies variations were identified in all parameters measured, and certain disc characteristics were observed across all species, such as a weak intermediate zone under mediolateral tension. While human discs possessed properties distinct from those of the other species, pig discs were most similar to the human, suggesting that the pig may be a suitable animal model for TMJ bioengineering efforts.

Public knowledge, beliefs and practices in Greece about cancer etiology and prevention

This questionnaire survey of the parents of elementary schoolchildren in Greece assessed their self-reported knowledge, attitudes and practices towards smoking, diet and exposure to X-radiation. A random sample of 403 household units [379 fathers and 391 mothers] was selected from urban areas of Thessaloniki. Half of the parents who smoked [50.1%] did not ask for permission to smoke from other people and 66.0% regularly smoked in front of their children. On the other hand, 82.6% of smokers recognized the existence of a health risk to children from passive smoking. Parents overestimated the role of nuclear tests and accidents as factors in carcinogenesis. Two-thirds of parents did not know the beneficial role of the Mediterranean diet to health, and dietary intake analysis showed some departure from the traditional Mediterranean diet. A reconsideration of the policy regarding health education programmes concerning cancer prevention in Greece is needed

Biomaterial effects in articular cartilage tissue engineering using polyglycolic acid, a novel marine origin biomaterial, IGF-I, and TGF-beta 1.

Bovine articular chondrocytes were seeded on either polyglycolic acid (PGA) non-woven mesh scaffolds or a biomatrix from the species Porites lutea (POR). These constructs were cultured for 6 weeks in the presence of insulin-like growth factor (IGF)-I (10 ng/ml or 100 ng/ml) or transforming growth factor (TGF)-beta 1 (5 ng/ml or 30 ng/ml) to determine the in-vitro articular cartilage regeneration capacity of each. Histology, deoxyribonucleic acid content, collagen I and II (immunohistochemistry and enzyme-linked immunosorbent assay), and glycosaminoglycan (GAG) contents were measured at 0 weeks, 2 weeks, and 6 weeks to assess the characteristics of chondrogenesis. Both scaffolds supported the maintenance of the chondrocytic phenotype, as evidenced by the predominance of collagen II and the presence of rounded chondrocytes embedded in lacunae. Regardless of growth factor treatment, cells cultured on PGA scaffolds produced more collagen type II than those cultured on POR. Conversely, by 6 weeks, cells cultured on POR scaffolds produced more GAG than those cultured on PGA scaffolds, again regardless of the growth factor used. Across the two groups, 100 ng/ml of IGF-I had the greatest overall effect in GAG content. This work indicates that PGA and the POR scaffolds are both effective growth matrices for articular cartilage, with each scaffold exhibiting different yet desirable profiles of articular cartilage growth.

Sclerosing cholangitis in the era of target chemotherapy: a possible anti-VEGF effect.

Preoperative systemic chemotherapy is generally applied in patients who undergo hepatic resection for colorectal metastases. Although the tumour response rate has been improved recently with the development of new molecular targeted therapies the related hepatic injury is ill defined. Bevacizumab is a monoclonal antibody to vascular endothelial growth factor. It can achieve high response rates and is accepted as a first line treatment in the metastatic colorectal disease. However, the data about its hepatotoxicity profile is still limited. We describe a case of secondary sclerosing cholangitis in a patient with liver metastases treated by Bevacizumab in the neoadjuvant setting and liver resection. It is possible that Bevacizumab may have induced a hypercoagulative condition that was further precipitated by surgery.