ABSTRACT
Supercapacitors have attracted considerable attention due to their advantages, including being lightweight and having rapid charge-discharge, a good rate capability, and high cyclic stability. Electrodes are one of the most important factors influencing the performance of supercapacitors. Herein, a three-dimensional network of rough and porous micropebbles of CeCu2Si2 has been prepared using a one-step procedure and tested for the first time as a supercapacitor electrode. The synthesized material was extensively characterized in a three-electrode configuration using different electrochemical techniques, such as cyclic voltammetry (CV), galvanostatic charge and discharge (GCD) tests, and electrochemical impedance spectroscopy (EIS). CeCu2Si2 shows rather high mass-capacitance values: 278 F/g at 1 A/g and 295 F/g at 10 mV/s. Moreover, the material exhibits remarkable long-term stability: 98% of the initial capacitance was retained after 20,000 cycles at 10 A/g and the Coulombic efficiency remains equal to 100% at the end of the cycles.
ABSTRACT
Nowadays, iron (II) selenide (FeSe), which has been widely studied for years to unveil the high-temperature superconductivity in iron-based superconductors, is drawing increasing attention in the electrical energy storage (EES) field as a supercapacitor electrode because of its many advantages. In this study, very small FeSe particles were synthesized via a simple, low-cost, easily scalable, and reproducible solvothermal method. The FeSe particles were characterized using cyclic voltammetry (CV), galvanostatic charge/discharge (GCD) measurements, and electrochemical impedance spectroscopy (EIS), revealing enhanced electrochemical properties: a high capacitance of 280 F/g at 0.5 A/g, a rather high energy density of 39 Wh/kg and a corresponding power density of 306 W/kg at 0.5 A/g, an extremely high cycling stability (capacitance retention of 92% after 30,000 cycles at 1 A/g), and a rather low equivalent series resistance (RESR) of ~2 Ω.
ABSTRACT
Non-centrosymmetric superconductors have recently received significant interest due to their intriguing physical properties such as multigap and nodal superconductivity, helical vortex states, as well as non-trivial topological effects. Moreover, large values of the upper critical magnetic field have been reported in these materials. Here, we focus on the study of the temperature dependence of the perpendicular magnetic field of NbRe and NbReN films patterned in micrometric strips. The experimental data are studied within the Werthamer-Helfand-Hohenberg theory, which considers both orbital and Zeeman pair breaking. The analysis of the results shows different behavior for the two materials with a Pauli contribution relevant only in the case of NbReN.
ABSTRACT
The interaction between two spatially separated systems is of strong interest in order to study a wide class of unconventional effects at cryogenic temperatures. Here we report on drag transverse voltage effects in multilayered systems containing superconducting and ferromagnetic materials. The sample under test is a conventional superconductor/insulator/ferromagnet (S/I/F) trilayer in a cross configuration. S/F as well as S/N (here N stands for normal metal) bilayers in the same geometry are also analyzed for comparison. Current-voltage (I-V) characteristics measured at T = 4.2 K in the presence of a perpendicular magnetic field show strong peculiarities related to the interaction between the layers. The results are interpreted in terms of interaction effects between the layers.
ABSTRACT
[Formula: see text] is an intermetallic compound with a bulk Curie temperature ([Formula: see text]) of 6-13 K. While existing studies have focused on [Formula: see text] crystals, amorphous thin-films of [Formula: see text] are potentially important since they would be magnetically soft without magnetocrystalline anisotropy, meaning that small external magnetic fields could reverse the direction of their magnetization. Here, we report [Formula: see text] thin-films with a thickness in the 5-200 nm range, deposited by DC magnetron sputtering onto Si(100). Films are amorphous with a weak temperature-dependent resistivity with values ranging between 150 and 300 [Formula: see text] cm. By means of noise spectroscopy, by analyzing the time-dependence of fluctuation-induced voltages, it is found that at low temperatures the resistance fluctuations are due to the Kondo effect. Volume magnetometry indicates [Formula: see text] K with a magnetic coercive field of 30 mT at 5 K for a 125-nm-thick film. The results are promising for the development of Ferromagnet(F)/Superconductor(S)/Ferromagnet(F) pseudo spin-valve devices based on amorphous [Formula: see text] thin films.
ABSTRACT
We develop a theoretical model to describe the transport properties of normal-metal/thin-ferromagnet/superconductor device. We perform experimental test of the model using a gold tip on PdNi/Nb bilayer. The resonant proximity effect causes conductance features very sensitive to the local ferromagnetic properties, enabling accurate measurement of polarization and thickness of the ferromagnet by point contact spectroscopy.
ABSTRACT
The magnetic properties of trilayers consisting of a diluted magnetic alloy, CuMn (Cu0.99Mn0.01), a soft ferromagnet, Py(≡Ni0.8Fe0.2), and an antiferromagnet, α-Fe2O3, were investigated. The samples, grown by UHV magnetron sputtering, were magnetically characterized in the temperature range T = 3-100 K. Typical exchange bias features, namely clear hysteresis cycle shifts and coercivity enhancements, were observed. Moreover the presence of an inverse bias, which had been already reported for spin glass-based structures, was also obtained in a well-defined range of temperatures and CuMn thicknesses.
ABSTRACT
In this paper we review some recent results obtained on superconducting/ferromagnetic (S/F) structures when measuring the dynamic instabilities of the vortex lattice at high driving currents. The role played on the non-equilibrium properties of the hybrids by both the ferromagnetic and the superconducting materials has been analyzed with a special focus on the values and the temperature dependence of the quasiparticle relaxation times, τ(E). Knowledge of the relaxation mechanisms in these systems is extremely important in view of possible applications since it can drive the optimal choice of both materials to realize, in particular, ultrafast superconducting single photon detectors based on S/F hybrid structures.
