ABSTRACT
Band structure engineering has a strong beneficial impact on thermoelectric performance, where theoretical methods dominate the investigation of electronic structures. Here, we use angle-resolved photoemission spectroscopy (ARPES) to analyze the electronic structure and report on the thermoelectric transport properties of half-Heusler TiCoSb high-quality single crystals. High degeneracy of the valence bands at the L and Γ band maximum points was observed, which provides a band-convergence scenario for the thermoelectric performance of TiCoSb. Previous efforts have shown how crystallographic defects play an important role in TiCoSb transport properties, while the intrinsic properties remain elusive. Using hard X-ray photoelectron spectroscopy (HAXPES), we discard the presence of interstitial defects that could induce in-gap states near the valence band in our crystals. Contrary to polycrystalline reports, intrinsic TiCoSb exhibits p-type transport, albeit defects still affect the carrier concentration. In two initially identical p-type TiCoSb crystal batches, distinct metallic and semiconductive behaviors were found owing to defects not noticeable by elemental analysis. A varying Seebeck effective mass is consistent with the change at the Fermi level within this band convergence picture. This report tackles the direct investigation of the electronic structure of TiCoSb and reveals new insights and the strong impact of point defects on the optimization of thermoelectric properties.
ABSTRACT
Transition metal chalcogenides such as CoS2 have been reported as competitive catalysts for oxygen evolution reaction. It has been well confirmed that surface modification is inevitable in such a process, with the formation of different re-constructed oxide layers. However, which oxide species should be responsible for the optimized catalytic efficiencies and the detailed interface structure between the modified layer and precatalyst remain controversial. Here, a topological CoS2 single crystal with a well-defined exposed surface is used as a model catalyst, which makes the direct investigation of the interface structure possible. Cross-sectional transmission electron microscopy of the sample reveals the formation of a 2 nm thickness Co3O4 layer that grows epitaxially on the CoS2 surface. Thick CoO pieces are also observed and are loosely attached to the bulk crystal. The compact Co3O4 interface structure can result in the fast electron transfer from adsorbed O species to the bulk crystal compared with CoO pieces as evidenced by the electrochemical impedance measurements. This leads to the competitive apparent and intrinsic reactivity of the crystal despite the low surface geometric area. These findings are helpful for the understanding of catalytic origins of transition metal chalcogenides and the designing of high-performance catalysts with interface-phase engineering.
ABSTRACT
Combining neutron diffraction with pair distribution function analysis, we have uncovered hidden reduced symmetry in the correlated metallic d1 perovskite, SrVO3. Specifically, we show that both the local and global structures are better described using a GdFeO3 distorted (orthorhombic) model as opposed to the ideal cubic ABO3 perovskite type. Recent reports of imaginary phonon frequencies in the density functional theory (DFT)-calculated phonon dispersion for cubic SrVO3 suggest a possible origin of this observed non-cubicity. Namely, the imaginary frequencies computed could indicate that the cubic crystal structure is unstable at T = 0 K. However, our DFT calculations provide compelling evidence that point defects in the form of oxygen vacancies, and not an observable symmetry breaking associated with calculated imaginary frequencies, primarily result in the observed non-cubicity of SrVO3. These experimental and computational results are broadly impactful because they reach into the thin-film and theoretical communities who have shown that SrVO3 is a technologically viable transparent conducting oxide material and have used SrVO3 to develop theoretical methods, respectively.
ABSTRACT
Topological magnets comprising 2D magnetic layers with Curie temperatures (TC ) exceeding room temperature are key for dissipationless quantum transport devices. However, the identification of a material with 2D ferromagnetic planes that exhibits an out-of-plane-magnetization remains a challenge. This study reports a ferromagnetic, topological, nodal-line, and semimetal MnAlGe composed of square-net Mn layers that are separated by nonmagnetic Al-Ge spacers. The 2D ferromagnetic Mn layers exhibit an out-of-plane magnetization below TC ≈ 503 K. Density functional calculations demonstrate that 2D arrays of Mn atoms control the electrical, magnetic, and therefore topological properties in MnAlGe. The unique 2D distribution of the Berry curvature resembles the 2D Fermi surface of the bands that form the topological nodal line near the Fermi energy. A large anomalous Hall conductivity of ≈700 S cm-1 is obtained at 2 K and related to this nodal-line-induced 2D Berry curvature distribution. The high transition temperature, large anisotropic out-of-plane magnetism, and natural heterostructure-type atomic arrangements consisting of magnetic Mn and nonmagnetic Al/Ge elements render nodal-line MnAlGe one of the few, unique, and layered topological ferromagnets that have ever been observed.
ABSTRACT
Accurate determination of the intrinsic electronic structure of thermoelectric materials is a prerequisite for utilizing an electronic band engineering strategy to improve their thermoelectric performance. Herein, with high-resolution angle-resolved photoemission spectroscopy (ARPES), the intrinsic electronic structure of the 3D half-Heusler thermoelectric material ZrNiSn is revealed. An unexpectedly large intrinsic bandgap is directly observed by ARPES and is further confirmed by electrical and optical measurements and first-principles calculations. Moreover, a large anisotropic conduction band with an anisotropic factor of 6 is identified by ARPES and attributed to be one of the most important reasons leading to the high thermoelectric performance of ZrNiSn. These successful findings rely on the grown high-quality single crystals, which have fewer Ni interstitial defects and negligible in-gap states on the electronic structure. This work demonstrates a realistic paradigm to investigate the electronic structure of 3D solid materials by using ARPES and provides new insights into the intrinsic electronic structure of the half-Heusler system benefiting further optimization of thermoelectric performance.
ABSTRACT
The observation of extraordinarily high conductivity in delafossite-type PdCoO2 is of great current interest, and there is some evidence that electrons behave like a fluid when flowing in bulk crystals of PdCoO2. Thus, this material is an ideal platform for the study of the electron transfer processes in heterogeneous reactions. Here, we report the use of bulk single-crystal PdCoO2 as a promising electrocatalyst for hydrogen evolution reactions (HERs). An overpotential of only 31 mV results in a current density of 10 mA cm-2, accompanied by high long-term stability. We have precisely determined that the crystal surface structure is modified after electrochemical activation with the formation of strained Pd nanoclusters in the surface layer. These nanoclusters exhibit reversible hydrogen sorption and desorption, creating more active sites for hydrogen access. The bulk PdCoO2 single crystal with ultrahigh conductivity, which acts as a natural substrate for the Pd nanoclusters, provides a high-speed channel for electron transfer.
ABSTRACT
The band inversion in topological phase matters bring exotic physical properties such as the topologically protected surface states (TSS). They strongly influence the surface electronic structures of the materials and could serve as a good platform to gain insight into the surface reactions. Here we synthesized high-quality bulk single crystals of Co3Sn2S2 that naturally hosts the band structure of a topological semimetal. This guarantees the existence of robust TSS from the Co atoms. Co3Sn2S2 crystals expose their Kagome lattice that constructed by Co atoms and have high electrical conductivity. They serves as catalytic centers for oxygen evolution process (OER), making bonding and electron transfer more efficient due to the partially filled orbital. The bulk single crystal exhibits outstanding OER catalytic performance, although the surface area is much smaller than that of Co-based nanostructured catalysts. Our findings emphasize the importance of tailoring TSS for the rational design of high-activity electrocatalysts.
ABSTRACT
Conductivity, carrier mobility, and a suitable Gibbs free energy are important criteria that determine the performance of catalysts for a hydrogen evolution reaction (HER). However, it is a challenge to combine these factors into a single compound. Herein, we discover a superior electrocatalyst for a HER in the recently identified Dirac nodal arc semimetal PtSn4 . The determined turnover frequency (TOF) for each active site of PtSn4 is 1.54â H2 s-1 at 100â mV. This sets a benchmark for HER catalysis on Pt-based noble metals and earth-abundant metal catalysts. We make use of the robust surface states of PtSn4 as their electrons can be transferred to the adsorbed hydrogen atoms in the catalytic process more efficiently. In addition, PtSn4 displays excellent chemical and electrochemical stabilities after long-term exposure in air and long-time HER stability tests.
ABSTRACT
Bismuth tellurohalides with Rashba-type spin splitting exhibit unique Fermi surface topology and are developed as promising thermoelectric materials. However, BiTeBr, which belongs to this class of materials, is rarely investigated in terms of the thermoelectric transport properties. In the study, polycrystalline bulk BiTeBr with intensive texture was synthesized via spark plasma sintering (SPS). Additionally, its thermoelectric properties above room temperature were investigated along both the in-plane and out-plane directions, and they exhibit strong anisotropy. Low sound velocity along two directions is found and contributes to its low lattice thermal conductivity. Polycrystalline BiTeBr exhibits relatively good thermoelectric performance along the in-plane direction, with a maximum dimensionless figure of merit (ZT) of 0.35 at 560 K. Further enhancements of ZT are expected by utilizing systematic optimization strategies.
ABSTRACT
Catalytically active Au@hollow-SiO2 particles embedded in porous silica support (Au@hollow-SiO2@PSS) were prepared by using spherical micelles from poly(styrene)-block-poly(4-vinyl pyridine) block copolymer as a sacrificial template. Drastic increase of the shell porosity was observed after pyrolytic removal of polymeric template because the stretched poly(4-vinyl pyridine) chains interpenetrating with silica shell acted as an effective porogen. The embedding of Au@hollow-SiO2 particles in porous silica support prevented their fusion during pyrolysis. The catalytic activity of Au@hollow-SiO2@PSS was investigated using a model reaction of catalytic reduction of 4-nitrophenol and reductive degradation of Congo red azo-dye. Significantly, to the best of our knowledge, Au@hollow-SiO2@PSS catalyst shows the highest activity among analogous systems reported till now in literature. Such high activity was attributed to the presence of multiple pores within silica shell of Au@hollow-SiO2 particles and easy accessibility of reagents to the catalytically active sites of the ligand-free gold surface through the porous silica support.
ABSTRACT
Complex Mo,V-based mixed oxides that crystallize in the orthorhombic M1-type structure are promising candidates for the selective oxidation of small alkanes. The oxygen sublattice of such a complex oxide has been studied by annular bright field scanning transmission electron microscopy. The recorded micrographs directly display the local distortion in the metal oxygen octahedra. From the degree of distortion we are able to draw conclusions on the distribution of oxidation states in the cation columns at different sites. The results are supported by X-ray diffraction and electron paramagnetic resonance measurements that provide integral details about the crystal structure and spin coupling, respectively.
ABSTRACT
In an approach to generating Saccharomyces cerevisiae strains with increased intracellular copper amounts for technical applications, we overexpressed the copper transporter CTR1 and a variant of CTR1 with a truncation in the C-terminus after the 300th amino acid (ctr1Δ300). We determined the copper sensitivity of the generated strains and used inductively coupled plasma spectrometry analysis (ICP-OES and ICP-MS) to investigate the effects of overexpression of both constructs under excess copper on the cellular content of different elements in S. cerevisiae. In addition, we performed DNA microarray analysis to obtain the gene expression profile under the changed element contents. Overexpression of CTR1 increased the copper content in the cells to 160% and 78 genes were differentially regulated. Overexpression of the truncated ctr1Δ300 resulted in an increased copper, iron and zinc content of > 200% and 980 genes showed differential expression. We found that transition metal ion homeostasis was disrupted in ctr1Δ300-overexpressing strains under excess copper and that this was combined with a transcriptional remodelling of cellular processes.
Subject(s)
Cation Transport Proteins/genetics , Copper/metabolism , Gene Expression Regulation, Fungal/drug effects , Saccharomyces cerevisiae Proteins/genetics , Saccharomyces cerevisiae/genetics , Biological Transport , Cation Transport Proteins/metabolism , Copper/analysis , Copper/pharmacology , Copper Transporter 1 , Cytosol/metabolism , Down-Regulation , Gene Expression , Gene Expression Profiling , Homeostasis , Iron/analysis , Iron/metabolism , Oligonucleotide Array Sequence Analysis , Recombinant Fusion Proteins , Saccharomyces cerevisiae/drug effects , Saccharomyces cerevisiae/growth & development , Saccharomyces cerevisiae/physiology , Saccharomyces cerevisiae Proteins/metabolism , Sequence Deletion , Spectrophotometry, Atomic , Transition Elements/analysis , Transition Elements/metabolism , Up-Regulation , Zinc/analysis , Zinc/metabolismABSTRACT
Single crystals of HfAs(1.7)Se(0.2) are grown by chemical transport reaction and their chemical composition characterized in detail by various analytical methods. Chemical analyses and crystal structure investigations by single-crystal X-ray diffraction as well as powder diffraction with synchrotron radiation reveal a tetragonal PbFCl structure type with strong disorder caused by a significant arsenic deficiency (As(0.9)) on the 2a site and mixed occupancy of the 2c site (As(0.8)Se(0.2)). HfAs(1.7)Se(0.2) is a diamagnetic metal which transforms into a superconducting state at T(c)=0.52 K. Similar to other PbFCl-type arsenide selenides, the title compound displays a magnetic-field-independent -AT(1/2) term in the low-temperature electrical resistivity. This unusual term presumably originates from the electron scattering of structural two-level systems. According to the experimental results, HfAs1.7Se0.2 appears to be a rare example of a nonmagnetic Kondo material.
ABSTRACT
Besides temperature at one atmosphere, the applied pressure is another important parameter for influencing and controlling reaction pathways and final reaction products. This is relevant not only for the genesis of natural minerals, but also for synthetic chemical products and technological materials. The present critical review (316 references) highlights recent developments that utilise high pressures and high-temperatures for the synthesis of new materials with unique properties, such as high hardness, or interesting magnetic or optoelectronic features. Novel metal nitrides, oxonitrides as well as the new class of nitride-diazenide compounds, all formed under high-pressure conditions, are highlighted. Pure oxides and carbides are not considered here. Moreover, syntheses under high-pressure conditions require special equipment and preparation techniques, completely different from those used for conventional synthetic approaches at ambient pressure. Therefore, we also summarize the high-pressure techniques used for the synthesis of new materials on a laboratory scale. In particular, our attention is focused on reactive gas pressure devices with pressures between 1.2 and 600 MPa, multi-anvil apparatus at P < 25 GPa and the diamond anvil cell, which allows work at pressures of 100 GPa and higher. For example, some of these techniques have been successfully upgraded to an industrial scale for the synthesis of diamond and cubic boron nitride.
ABSTRACT
The present work has provided a complete set of assignments for the vibrational spectrum of Rb(2)PtH(6) and Rb(2)PtD(6). To confirm the assignments, a periodic density functional theory (DFT) code has been applied to the analysis of the inelastic neutron scattering (INS) spectrum of an ionic material for the first time. The work has also provided an explanation for the unusual infrared spectrum of the potassium salt. The most significant aspect of the work is the use of the momentum transfer information provided by an INS chopper spectrometer. The straightforward method employed for the analysis of the data is applicable to any molecular system (organic or inorganic) and demonstrates the potential of these instruments for chemistry. Periodic DFT was also used to study the other A(2)PtH(6) (A = alkali metal) including, the at present, unknown Li salt, which is found to be stable. The DFT studies have also highlighted the crucial role of the cation in removing charge from the transition metal and "hydride" ligand. It is suggested that this is a general occurrence.