Leveraging low-cost sensors to predict nitrogen dioxide for epidemiologic exposure assessment.

BACKGROUND: Statistical models of air pollution enable intra-urban characterization of pollutant concentrations, benefiting exposure assessment for environmental epidemiology. The new generation of low-cost sensors facilitate the deployment of dense monitoring networks and can potentially be used to improve intra-urban models of air pollution. OBJECTIVE: Develop and evaluate a spatiotemporal model for nitrogen dioxide (NO2) in the Puget Sound region of WA, USA for the Adult Changes in Thought Air Pollution (ACT-AP) study and assess the contribution of low-cost sensor data to the model's performance through cross-validation. METHODS: We developed a spatiotemporal NO2 model for the study region incorporating data from 11 agency locations, 364 supplementary monitoring locations, and 117 low-cost sensor (LCS) locations for the 1996-2020 time period. Model features included long-term time trends and dimension-reduced land use regression. We evaluated the contribution of LCS network data by comparing models fit with and without sensor data using cross-validated (CV) summary performance statistics. RESULTS: The best performing model had one time trend and geographic covariates summarized into three partial least squares components. The model, fit with LCS data, performed as well as other recent studies (agency cross-validation: CV- root mean square error (RMSE) = 2.5 ppb NO2; CV- coefficient of determination ( R 2 ) = 0.85). Predictions of NO2 concentrations developed with LCS were higher at residential locations compared to a model without LCS, especially in recent years. While LCS did not provide a strong performance gain at agency sites (CV-RMSE = 2.8 ppb NO2; CV- R 2 = 0.82 without LCS), at residential locations, the improvement was substantial, with RMSE = 3.8 ppb NO2 and R 2 = 0.08 (without LCS), compared to CV-RMSE = 2.8 ppb NO2 and CV- R 2 = 0.51 (with LCS). IMPACT: We developed a spatiotemporal model for nitrogen dioxide (NO2) pollution in Washington's Puget Sound region for epidemiologic exposure assessment for the Adult Changes in Thought Air Pollution study. We examined the impact of including low-cost sensor data in the NO2 model and found the additional spatial information the sensors provided predicted NO2 concentrations that were higher than without low-cost sensors, particularly in recent years. We did not observe a clear, substantial improvement in cross-validation performance over a similar model fit without low-cost sensor data; however, the prediction improvement with low-cost sensors at residential locations was substantial. The performance gains from low-cost sensors may have been attenuated due to spatial information provided by other supplementary monitoring data.

Prevalence and predictors of colon and prostate cancer screening among volunteer firefighters: The United States Firefighter Cancer Assessment and Prevention Study.

BACKGROUND: Although firefighters have increased risk for colon and prostate cancer, limited information exists on screening practices for these cancers in volunteer firefighters who compose two-thirds of the US fire service. We estimated the prevalence of colon and prostate cancer screening among volunteer firefighters using eligibility criteria from 4 evidence-based screening recommendations and evaluated factors influencing screening. METHODS: We evaluated colon (n = 569) and prostate (n = 498) cancer screening prevalence in a sample of US volunteer firefighters using eligibility criteria from the US Preventive Services Taskforce (USPSTF), National Fire Protection Association, American Cancer Society, and National Comprehensive Cancer Network. We assessed associations with fire service experience, demographics, and cancer risk perception based on USPSTF guidelines. RESULTS: For those eligible based on USPSTF guidelines, colon and prostate cancer screening prevalence was 51.7% (95% CI: 45.7, 57.8) and 48.8% (95% CI: 40.0, 57.6), respectively. Higher odds of colon and prostate cancer screening were observed with older age and with some college education compared to those with less education. Fire service experience and cancer risk perception were not associated with screening practices. CONCLUSION: This is the first large study to assess colon and prostate cancer screening among US volunteer firefighters based on different screening guidelines. Our findings suggest gaps in cancer prevention efforts in the US volunteer fire service. Promoting cancer screening education and opportunities for volunteer firefighters by their fire departments, healthcare professionals, and public health practitioners, may help to address the gaps.

Quantifying the contributions of road and air traffic to ambient ultrafine particles in two urban communities.

Traffic-related activities are widely acknowledged as a primary source of urban ambient ultrafine particles (UFPs). However, a notable gap exists in quantifying the contributions of road and air traffic to size-resolved and total UFPs in urban areas. This study aims to delineate and quantify the traffic's contributions to size-resolved and total UFPs in two urban communities. To achieve this, stationary sampling was conducted at near-road and near-airport communities in Seattle, Washington State, to monitor UFP number concentrations during 2018-2020. Comprehensive correlation analyses among all variables were performed. Furthermore, a fully adjusted generalized additive model, incorporating meteorological factors, was developed to quantify the contributions of road and air traffic to size-resolved and total UFPs. The study found that vehicle emissions accounted for 29% of total UFPs at the near-road site and 13% at the near-airport site. Aircraft emissions contributed 14% of total UFPs at the near-airport site. Notably, aircraft predominantly emitted UFP sizes below 20 nm, while vehicles mainly emitted UFP sizes below 50 nm. These findings reveal the variability in road and air traffic contributions to UFPs in distinct areas. Our study emphasizes the pivotal role of traffic layout in shaping urban UFP exposure.

Prevalence and predictors of skin cancer screening among a sample of US volunteer firefighters.

BACKGROUND: Firefighters have a higher risk of melanoma incidence and mortality compared to the general population. In the United States (US), the National Fire Protection Association recommends all firefighters receive annual skin cancer screening through visual skin examination by a clinician. However, there is limited information on skin cancer screening practices among volunteer firefighters who comprise two-thirds of the US fire service. METHODS: This cross-sectional study of 552 US volunteer firefighters estimated the prevalence of skin cancer screening and evaluated associations with their fire service experience, demographics, sun protection practices, and cancer risk perception. RESULTS: The prevalence of receiving skin cancer screening among volunteer firefighters was 26.1% (95% confidence interval [CI]: 22.4, 29.8). The odds of being screened for skin cancer, compared to not being screened, were twice as high for firefighters who used sunscreen (odds ratio [OR]: 2.35, 95% CI: 1.48, 3.73) and who perceived their skin likely to burn with prolonged sun exposure (OR: 1.81, 95% CI: 1.10, 3.00). Older age, some college education, and family history of skin cancer were also positively associated with skin cancer screening. A positive exposure-response relationship was observed between more monthly firefighting calls and receiving screening. Cancer risk perception was not associated with screening. CONCLUSION: To our knowledge, this is the first large study to assess skin cancer screening among US volunteer firefighters. Our findings suggest gaps in skin cancer prevention efforts in the volunteer fire service. Additional assessment of skin cancer prevention practices within volunteer fire departments could help address these gaps.

Characterizing Ultrafine Particle Mobile Monitoring Data for Epidemiology.

Mobile monitoring is increasingly used to assess exposure to traffic-related air pollutants (TRAPs), including ultrafine particles (UFPs). Due to the rapid spatial decrease in the concentration of UFPs and other TRAPs with distance from roadways, mobile measurements may be non-representative of residential exposures, which are commonly used for epidemiologic studies. Our goal was to develop, apply, and test one possible approach for using mobile measurements in exposure assessment for epidemiology. We used an absolute principal component score model to adjust the contribution of on-road sources in mobile measurements to provide exposure predictions representative of cohort locations. We then compared UFP predictions at residential locations from mobile on-road plume-adjusted versus stationary measurements to understand the contribution of mobile measurements and characterize their differences. We found that predictions from mobile measurements are more representative of cohort locations after down-weighting the contribution of localized on-road plumes. Further, predictions at cohort locations derived from mobile measurements incorporate more spatial variation compared to those from short-term stationary data. Sensitivity analyses suggest that this additional spatial information captures features in the exposure surface not identified from the stationary data alone. We recommend the correction of mobile measurements to create exposure predictions representative of residential exposure for epidemiology.

Wildfire smoke exposure and emergency department visits in Washington State.

Wildfires are increasing in prevalence in western North America due to changing climate conditions. A growing number of studies examine the impact of wildfire smoke on morbidity; however, few evaluate these impacts using syndromic surveillance data that cover many emergency departments (EDs). We used syndromic surveillance data to explore the effect of wildfire smoke exposure on all-cause respiratory and cardiovascular ED visits in Washington state. Using a time-stratified case crossover design, we observed an increased odds of asthma visits immediately after and in all five days following initial exposure (lag 0 OR: 1.13; 95% CI: 1.10, 1.17; lag 1-5 ORs all 1.05 or greater with a lower CI of 1.02 or higher), and an increased odds of respiratory visits in all five days following initial exposure (lag 1 OR: 1.02; 95% CI: 1.00, 1.03; lag 2-5 ORs and lower CIs were all at least as large) comparing wildfire smoke to non-wildfire smoke days. We observed mixed results for cardiovascular visits, with evidence of increased odds emerging only several days following initial exposure. We also found increased odds across all visit categories for a 10 µg m-3 increase in smoke-impacted PM2.5. In stratified analyses, we observed elevated odds for respiratory visits among ages 19-64, for asthma visits among ages 5-64, and mixed risk estimates for cardiovascular visits by age group. This study provides evidence of an increased risk of respiratory ED visits immediately following initial wildfire smoke exposure, and increased risk of cardiovascular ED visits several days following initial exposure. These increased risks are seen particularly among children and younger to middle-aged adults.

Assessing the effectiveness of portable HEPA air cleaners for reducing particulate matter exposure in King County, Washington homeless shelters: Implications for community congregate settings.

Over four thousand portable air cleaners (PACs) with high-efficiency particulate air (HEPA) filters were distributed by Public Health - Seattle & King County to homeless shelters during the COVID-19 pandemic. This study aimed to evaluate the real-world effectiveness of these HEPA PACs in reducing indoor particles and understand the factors that affect their use in homeless shelters. Four rooms across three homeless shelters with varying geographic locations and operating conditions were enrolled in this study. At each shelter, multiple PACs were deployed based on the room volume and PAC's clean air delivery rate rating. The energy consumption of these PACs was measured using energy data loggers at 1-min intervals to allow tracking of their use and fan speed for three two-week sampling rounds, separated by single-week gaps, between February and April 2022. Total optical particle number concentration (OPNC) was measured at 2-min intervals at multiple indoor locations and an outdoor ambient location. The empirical indoor and outdoor total OPNC were compared for each site. Additionally, linear mixed-effects regression models (LMERs) were used to assess the relationship between PAC use time and indoor/outdoor total OPNC ratios (I/OOPNC). Based on the LMER models, a 10 % increase in the hourly, daily, and total time PACs were used significantly reduced I/OOPNC by 0.034 [95 % CI: 0.028, 0.040; p < 0.001], 0.051 [95 % CI: 0.020, 0.078; p < 0.001], and 0.252 [95 % CI: 0.150, 0.328; p < 0.001], respectively, indicating that keeping PACs on resulted in significantly lower I/OOPNC. The survey suggested that keeping PACs on and running was the main challenge when operating them in shelters. These findings suggested that HEPA PACs were an effective short-term strategy to reduce indoor particle levels in community congregate living settings during non-wildfire seasons and the need for formulating practical guidance for using them in such an environment.

Wildfire Smoke Monitoring for Agricultural Safety and Health in Rural Washington.

OBJECTIVES: This study aimed to evaluate the performance of a low-cost smoke sampling platform relative to environmental and occupational exposure monitoring methods in a rural agricultural region in central Washington state. METHODS: We co-located the Thingy AQ sampling platform alongside cyclone-based gravimetric samplers, a nephelometer, and an environmental beta attenuation mass (E-BAM) monitor during August and September of 2020. Ambient particulate matter concentrations were collected during a smoke and non-smoke period and measurements were compared across sampling methods. RESULTS: We found reasonable agreement between observations from two particle sensors within the Thingy AQ platform and the nephelometer and E-BAM measurements throughout the study period, though the measurement range of the sensors was greater during the smoke period compared to the non-smoke period. Occupational gravimetric sampling methods did not correlate with PM2.5 data collected during smoke periods, likely due to their capture of larger particle sizes than those typically measured by PM2.5 ambient air quality instruments during wildfire events. CONCLUSION: Data collected before and during an intense wildfire smoke episode in September 2020 indicated that the low-cost smoke sampling platform provides a strategy to increase access to real-time air quality information in rural areas where regulatory monitoring networks are sparse if sensor performance characteristics under wildfire smoke conditions are understood. Improving access to spatially resolved air quality information could help agricultural employers protect both worker and crop health as wildfire smoke exposure increases due to the impacts of climate change. Such information can also assist employers with meeting new workplace wildfire smoke health and safety rules.

Impact of Mobile Monitoring Network Design on Air Pollution Exposure Assessment Models.

Short-term mobile monitoring campaigns are increasingly used to assess long-term air pollution exposure in epidemiology. Little is known about how monitoring network design features, including the number of stops and sampling temporality, impacts exposure assessment models. We address this gap by leveraging an extensive mobile monitoring campaign conducted in the greater Seattle area over the course of a year during all days of the week and most hours. The campaign measured total particle number concentration (PNC; sheds light on ultrafine particulate (UFP) number concentration), black carbon (BC), nitrogen dioxide (NO2), fine particulate matter (PM2.5), and carbon dioxide (CO2). In Monte Carlo sampling of 7327 total stops (278 sites × 26 visits each), we restricted the number of sites and visits used to estimate annual averages. Predictions from the all-data campaign performed well, with cross-validated R2s of 0.51-0.77. We found similar model performances (85% of the all-data campaign R2) with ∼1000 to 3000 randomly selected stops for NO2, PNC, and BC, and ∼4000 to 5000 stops for PM2.5 and CO2. Campaigns with additional temporal restrictions (e.g., business hours, rush hours, weekdays, or fewer seasons) had reduced model performances and different spatial surfaces. Mobile monitoring campaigns wanting to assess long-term exposure should carefully consider their monitoring designs.

Design and evaluation of short-term monitoring campaigns for long-term air pollution exposure assessment.

BACKGROUND: Short-term mobile monitoring campaigns to estimate long-term air pollution levels are becoming increasingly common. Still, many campaigns have not conducted temporally-balanced sampling, and few have looked at the implications of such study designs for epidemiologic exposure assessment. OBJECTIVE: We carried out a simulation study using fixed-site air quality monitors to better understand how different short-term monitoring designs impact the resulting exposure surfaces. METHODS: We used Monte Carlo resampling to simulate three archetypal short-term monitoring sampling designs using oxides of nitrogen (NOx) monitoring data from 69 regulatory sites in California: a year-around Balanced Design that sampled during all seasons of the year, days of the week, and all or various hours of the day; a temporally reduced Rush Hours Design; and a temporally reduced Business Hours Design. We evaluated the performance of each design's land use regression prediction model. RESULTS: The Balanced Design consistently yielded the most accurate annual averages; while the reduced Rush Hours and Business Hours Designs generally produced more biased results. SIGNIFICANCE: A temporally-balanced sampling design is crucial for short-term campaigns such as mobile monitoring aiming to assess long-term exposure in epidemiologic cohorts. IMPACT STATEMENT: Short-term monitoring campaigns to assess long-term air pollution trends are increasingly common, though they rarely conduct temporally balanced sampling. We show that this approach produces biased annual average exposure estimates that can be improved by collecting temporally-balanced samples.

Potential Impacts of Different Occupational Outdoor Heat Exposure Thresholds among Washington State Crop and Construction Workers and Implications for Other Jurisdictions.

Occupational heat exposure is associated with substantial morbidity and mortality among outdoor workers. We sought to descriptively evaluate spatiotemporal variability in heat threshold exceedances and describe potential impacts of these exposures for crop and construction workers. We also present general considerations for approaching heat policy-relevant analyses. We analyzed county-level 2011-2020 monthly employment (Bureau of Labor Statistics Quarterly Census of Employment and Wages) and environmental exposure (Parameter-elevation Relationships on Independent Slopes Model (PRISM)) data for Washington State (WA), USA, crop (North American Industry Classification System (NAICS) 111 and 1151) and construction (NAICS 23) sectors. Days exceeding maximum daily temperature thresholds, averaged per county, were linked with employment estimates to generate employment days of exceedances. We found spatiotemporal variability in WA temperature threshold exceedances and crop and construction employment. Maximum temperature exceedances peaked in July and August and were most numerous in Central WA counties. Counties with high employment and/or high numbers of threshold exceedance days, led by Yakima and King Counties, experienced the greatest total employment days of exceedances. Crop employment contributed to the largest proportion of total state-wide employment days of exceedances with Central WA counties experiencing the greatest potential workforce burden of exposure. Considerations from this analysis can help inform decision-making regarding thresholds, timing of provisions for heat rules, and tailoring of best practices in different industries and areas.

Partnership to Develop and Deliver Curriculum Supporting Student-led Air Quality Research in Rural Washington State.

BACKGROUND: This article describes the process and educational materials developed and implemented for high school students through a partnership between an urban public university and a rural, non-profit university. This specific partnership was novel but originated within a long-standing community-academic partnership. This project took place in a rural community impacted by air pollution and a higher asthma hospitalization rate compared with the rest of the state. OBJECTIVES: The objectives of this article are to describe the development and implementation of a high school program where students conducted their own research on local air quality using low-cost monitors with the guidance of undergraduate student mentors. METHODS: University faculty, researchers, and students collaborated to develop an air quality curriculum relevant to local issues. This curriculum was delivered to high school students through an existing after school program, and guided students in conducting their own research on community air pollution. The students used university-provided low-cost monitors for their research, and presented their research to community members. Student learning was supported through hands-on activities and conducting research projects. Student projects examined air quality variation indoors within their school, outdoors in their community, and at home. CONCLUSIONS: This curriculum can be adapted for use with students in many different communities. It will likely be most successful and engaging if adapted to local air pollution sources and issues, and implemented through an existing programmatic structure with a high mentor to student ratio.

Characterization of Annual Average Traffic-Related Air Pollution Concentrations in the Greater Seattle Area from a Year-Long Mobile Monitoring Campaign.

Growing evidence links traffic-related air pollution (TRAP) to adverse health effects. We designed an innovative and extensive mobile monitoring campaign to characterize TRAP exposure levels for the Adult Changes in Thought (ACT) study, a Seattle-based cohort. The campaign measured particle number concentration (PNC) to capture ultrafine particles (UFP), black carbon (BC), nitrogen dioxide (NO2), fine particulate matter (PM2.5), and carbon dioxide (CO2) at 309 roadside sites within a large, 1200 land km2 (463 mi2) area representative of the cohort. We collected about 29 two-minute measurements at each site during all seasons, days of the week, and most times of the day over a 1-year period. Validation showed good agreement between our BC, NO2, and PM2.5 measurements and monitoring agency sites (R2 = 0.68-0.73). Universal kriging-partial least squares models of annual average pollutant concentrations had cross-validated mean square error-based R2 (and root mean square error) values of 0.77 (1177 pt/cm3) for PNC, 0.60 (102 ng/m3) for BC, 0.77 (1.3 ppb) for NO2, 0.70 (0.3 µg/m3) for PM2.5, and 0.51 (4.2 ppm) for CO2. Overall, we found that the design of this extensive campaign captured the spatial pollutant variations well and these were explained by sensible land use features, including those related to traffic.

Potential impacts of Washington State's wildfire worker protection rule on construction workers.

Driven by climate change, wildfires are increasing in frequency, duration, and intensity across the Western United States. Outdoor workers are being exposed to increasing wildfire-related particulate matter and smoke. Recognizing this emerging risk, Washington adopted an emergency rule and is presently engaged in creating a permanent rule to protect outdoor workers from wildfire smoke exposure. While there are growing bodies of literature on the exposure to and health effects of wildfire smoke in the general public and wildland firefighters, there is a gap in knowledge about wildfire smoke exposure among outdoor workers generally and construction workers specifically-a large category of outdoor workers in Washington totaling 200,000 people. Several data sources were linked in this study-including state-collected employment data and national ambient air quality data-to gain insight into the risk of PM2.5 exposure among construction workers and evaluate the impacts of different air quality thresholds that would have triggered a new Washington emergency wildfire smoke rule aimed at protecting workers from high PM2.5 exposure. Results indicate the number of poor air quality days has increased in August and September in recent years. Over the last decade, these months with the greatest potential for particulate matter exposure coincided with an annual peak in construction employment that was typically 9.4-42.7% larger across Washington counties (one county was 75.8%). Lastly, the 'encouraged' threshold of the Washington emergency rule (20.5 µg m-3) would have resulted in 5.5 times more days subject to the wildfire rule on average across all Washington counties compared to its 'required' threshold (55.5 µg m-3), and in 2020, the rule could have created demand for 1.35 million N-95 filtering facepiece respirators among construction workers. These results have important implications for both employers and policy makers as rules are developed. The potential policy implications of wildfire smoke exposure, exposure control strategies, and data gaps that would improve understanding of construction worker exposure to wildfire smoke are also discussed.

Assessing the value of complex refractive index and particle density for calibration of low-cost particle matter sensor for size-resolved particle count and PM2.5 measurements.

Low-cost optical scattering particulate matter (PM) sensors report total or size-specific particle counts and mass concentrations. The PM concentration and size are estimated by the original equipment manufacturer (OEM) proprietary algorithms, which have inherent limitations since particle scattering depends on particles' properties such as size, shape, and complex index of refraction (CRI) as well as environmental parameters such as temperature and relative humidity (RH). As low-cost PM sensors are not able to resolve individual particles, there is a need to characterize and calibrate sensors' performance under a controlled environment. Here, we present improved calibration algorithms for Plantower PMS A003 sensor for mass indices and size-resolved number concentration. An aerosol chamber experimental protocol was used to evaluate sensor-to-sensor data reproducibility. The calibration was performed using four polydisperse test aerosols. The particle size distribution OEM calibration for PMS A003 sensor did not agree with the reference single particle sizer measurements. For the number concentration calibration, the linear model without adjusting for the aerosol properties and environmental conditions yields an absolute error (NMAE) of ~ 4.0% compared to the reference instrument. The calibration models adjusted for particle CRI and density account for non-linearity in the OEM's mass concentrations estimates with NMAE within 5.0%. The calibration algorithms developed in this study can be used in indoor air quality monitoring, occupational/industrial exposure assessments, or near-source monitoring scenarios where field calibration might be challenging.

Characterization of cooking-related ultrafine particles in a US residence and impacts of various intervention strategies.

Interventions that improve air exchange or filter the air have the potential to reduce particle exposures from residential cooking. In this study, we evaluated the effect of using a range hood, opening kitchen windows, and using portable air cleaners (PACs) in various home locations on the concentrations of ultrafine particles (UFPs) at different times and in different rooms during and after cooking. All experiments were conducted using a standardized cooking protocol in a real-world naturally-ventilated apartment located in the northwest United States. Real-time UFP measurements collected from the kitchen, living room, and bedroom locations were used to estimate parameters of a dynamic model, which included time-varying particle emission rates from cooking and particle decay. We found that 1-min mean UFP number concentrations in the kitchen and living room mostly peaked within 0-10 min after cooking ended at levels of 150,000-500,000 particles/cm3. In contrast, the bedroom UFP concentrations were consistently low except for the window-open scenario. While varying considerably with time, the 1-min UFP emission rates were comparable during and within 5-min after cooking, with means (standard deviations) of 0.8 (1.1) × 1012 and 1.1 (1.2) × 1012 particles/min, respectively. Compared with the no-intervention scenario, keeping the kitchen windows open and using a kitchen range hood reduced the mean indoor average UFP concentrations during and 1 h after cooking by ~70% and ~35%, respectively. Along with the range hood on, utilizing a PAC in the kitchen during and after cooking further reduced the mean indoor average UFP levels during and 1 h after cooking by an additional 53%. In contrast, placing the PAC in the living room or bedroom resulted in worse efficacy, with additional 2-13% reductions. These findings provide useful information on how to reduce cooking-related UFP exposure via readily accessible intervention strategies.

Deployment, Calibration, and Cross-Validation of Low-Cost Electrochemical Sensors for Carbon Monoxide, Nitrogen Oxides, and Ozone for an Epidemiological Study.

We designed and built a network of monitors for ambient air pollution equipped with low-cost gas sensors to be used to supplement regulatory agency monitoring for exposure assessment within a large epidemiological study. This paper describes the development of a series of hourly and daily field calibration models for Alphasense sensors for carbon monoxide (CO; CO-B4), nitric oxide (NO; NO-B4), nitrogen dioxide (NO2; NO2-B43F), and oxidizing gases (OX-B431)-which refers to ozone (O3) and NO2. The monitor network was deployed in the Puget Sound region of Washington, USA, from May 2017 to March 2019. Monitors were rotated throughout the region, including at two Puget Sound Clean Air Agency monitoring sites for calibration purposes, and over 100 residences, including the homes of epidemiological study participants, with the goal of improving long-term pollutant exposure predictions at participant locations. Calibration models improved when accounting for individual sensor performance, ambient temperature and humidity, and concentrations of co-pollutants as measured by other low-cost sensors in the monitors. Predictions from the final daily models for CO and NO performed the best considering agreement with regulatory monitors in cross-validated root-mean-square error (RMSE) and R2 measures (CO: RMSE = 18 ppb, R2 = 0.97; NO: RMSE = 2 ppb, R2 = 0.97). Performance measures for NO2 and O3 were somewhat lower (NO2: RMSE = 3 ppb, R2 = 0.79; O3: RMSE = 4 ppb, R2 = 0.81). These high levels of calibration performance add confidence that low-cost sensor measurements collected at the homes of epidemiological study participants can be integrated into spatiotemporal models of pollutant concentrations, improving exposure assessment for epidemiological inference.

Residential cooking-related PM2.5: Spatial-temporal variations under various intervention scenarios.

Some cooking events can generate high levels of hazardous PM2.5. This study assesses the dispersion of cooking-related PM2.5 throughout a naturally-ventilated apartment in the US, examines the dynamic process of cooking-related emissions, and demonstrates the impact of different indoor PM2.5 mitigating strategies. We conducted experiments with a standardized pan-frying cooking procedure under seven scenarios, involving opening kitchen windows, using a range hood, and utilizing a portable air cleaner (PAC) in various indoor locations. Real-time PM2.5 concentrations were measured in the open kitchen, living room, bedroom (door closed), and outdoor environments. Decay-related parameters were estimated, and time-resolved PM2.5 emission rates for each experiment were determined using a dynamic model. Results show that the 1-min mean PM2.5 concentrations in the kitchen and living room peaked 1-7 min after cooking at levels of 200-1400 µg/m3, which were more than 9 times higher than the peak bedroom levels. Mean (standard deviation) kt for the kitchen, ranging from 0.58 (0.02) to 6.62 (0.34) h-1, was generally comparable to that of the living room (relative difference < 20%), but was 1-5 times larger than that of the bedroom. The range of PM2.5 full-decay time was between 1-10 h for the kitchen and living room, and from 0 to > 6 h for the bedroom. The PM2.5 emission rates during and 5 min after cooking were 2.3 (3.4) and 5.1 (3.9) mg/min, respectively. Intervention strategies, including opening kitchen windows and using PACs either in the kitchen or living room, can substantially reduce indoor PM2.5 levels and the related full-decay time. For scenarios involving a PAC, placing it in the kitchen (closer to the source) resulted in better efficacy.

Health Impact Assessment of the 2020 Washington State Wildfire Smoke Episode: Excess Health Burden Attributable to Increased PM2.5 Exposures and Potential Exposure Reductions.

Major wildfires starting in the summer of 2020 along the west coast of the United States made PM2.5 concentrations in this region rank among the highest in the world. Washington was impacted both by active wildfires in the state and aged wood smoke transported from fires in Oregon and California. This study aims to estimate the magnitude and disproportionate spatial impacts of increased PM2.5 concentrations attributable to these wildfires on population health. Daily PM2.5 concentrations for each county before and during the 2020 Washington wildfire episode (September 7-19) were obtained from regulatory air monitors. Utilizing previously established concentration-response function (CRF) of PM2.5 (CRF of total PM2.5) and odds ratio (OR) of wildfire smoke days (OR of wildfire smoke days) for mortality, we estimated excess mortality attributable to the increased PM2.5 concentrations in Washington. On average, daily PM2.5 concentrations increased 97.1 µg/m3 during the wildfire smoke episode. With CRF of total PM2.5, the 13-day exposure to wildfire smoke was estimated to lead to 92.2 (95% CI: 0.0, 178.7) more all-cause mortality cases; with OR of wildfire smoke days, 38.4 (95% CI: 0.0, 93.3) increased all-cause mortality cases and 15.1 (95% CI: 0.0, 27.9) increased respiratory mortality cases were attributable to the wildfire smoke episode. The potential impact of avoiding elevated PM2.5 exposures during wildfire events significantly reduced the mortality burden. Because wildfire smoke episodes are likely to impact the Pacific Northwest in future years, continued preparedness and mitigations to reduce exposures to wildfire smoke are necessary to avoid excess health burden.

Energy consumption of using HEPA-based portable air cleaner in residences: A monitoring study in Seattle, US.

Portable air cleaners (PACs), offering both auto and manual (adjustable) operation modes, are commonly used in residences. Compared with adjustable mode, auto mode's advantage of reducing indoor PM2.5 has been previously demonstrated. This study examines the energy consumption of such PACs in six residences recruited in Seattle, United States, and compares the power consumption between auto and adjustable modes. Each residence went through a one-week-long PAC filtration session under auto and adjustable modes, respectively. PAC power consumption, indoor PM2.5, temperature, and relative humidity (RH) were measured at 10-second intervals in each residence. A linear mixed-effects regression (LMER) model was used to compare the PAC power consumption between the two modes after adjusting for indoor PM2.5, temperature, and RH. Results show that the mean (standard deviation) PAC power consumption under adjustable and auto modes were 7.0 (3.5) and 6.8 (2.6) W, respectively. The average monthly energy consumption of continuous PAC operation was estimated to be ~5 kWh for both modes. Based on the LEMR model, PAC power consumption under auto mode was approximately 3% larger than that under adjustable mode, after adjusting for living-room PM2.5, temperature, and RH levels. The implications for PAC operation mode selection in residential environments were discussed.