Application of a Waveguide-Mode Sensor to Blood Testing for Hepatitis B Virus, Hepatitis C Virus, Human Immunodeficiency Virus and Treponema pallidum Infection.

Testing for blood-transmitted infectious agents is an important aspect of safe medical treatment. During emergencies, such as significant earthquakes, many patients need surgical treatment and/or blood transfusion. Because a waveguide mode (WM) sensor can be used as a portable, on-site blood testing device in emergency settings, we have previously developed WM sensors for detection of antibodies against hepatitis B virus and hepatitis C virus and for forward ABO and Rh(D) and reverse ABO blood typing. In this study, we compared signal enhancement methods using secondary antibodies conjugated with peroxidase, a fluorescent dye, and gold nanoparticles, and found that the peroxidase reaction method offers superior sensitivity while gold nanoparticles provide the most rapid detection of anti-HBs antibody. Next, we examined whether we could apply a WM sensor with signal enhancement with peroxidase or gold nanoparticles to detection of antibodies against hepatitis C virus, human immunodeficiency virus and Treponema pallidum, and HBs antigen in plasma. We showed that a WM sensor can detect significant signals of these infectious agents within 30 min. Therefore, a portable device utilizing a WM sensor can be used for on-site blood testing of infectious agents in emergency settings.

Sensitive typing of reverse ABO blood groups with a waveguide-mode sensor.

Portable, on-site blood typing methods will help provide life-saving blood transfusions to patients during an emergency or natural calamity, such as significant earthquakes. We have previously developed waveguide-mode (WM) sensors for forward ABO and Rh(D) blood typing and detection of antibodies against hepatitis B virus and hepatitis C virus. In this study, we evaluated a WM-sensor for reverse ABO blood typing. Since reverse ABO blood typing is a method for detection of antibodies against type A and type B oligosaccharide antigens on the surface of red blood cells (RBCs), we fixed a synthetic type A or type B trisaccharide antigen on the sensor chip of the WM sensor. We obtained significant changes in the reflectance spectra from a WM sensor on type A antigen with type B plasma and type O plasma and on type B antigen with type A plasma and type O plasma, and no spectrum changes on type A antigen or type B antigen with type AB plasma. Signal enhancement with the addition of a peroxidase reaction failed to increase the sensitivity for detection on oligosaccharide chips. By utilizing hemagglutination detection using regent type A and type B RBCs, we successfully determined reverse ABO blood groups with higher sensitivity compared to a method using oligosaccharide antigens. Thus, functionality of a portable device utilizing a WM sensor can be expanded to include reverse ABO blood typing and, in combination with forward ABO typing and antivirus antibody detection, may be useful for on-site blood testing in emergency settings.

Detection of antibodies against hepatitis B virus surface antigen and hepatitis C virus core antigen in plasma with a waveguide-mode sensor.

In large-scale disasters, such as huge significant earthquakes, on-site examination for blood typing and infectious disease screening will be very helpful to save lives of victims who need surgical treatment and/or blood transfusion. However, physical damage, such as building collapse, electric power failure and traffic blockage, disrupts the capacity of the medical system. Portable diagnostic devices are useful in such cases of emergency. In this study, we evaluated a waveguide-mode sensor for detection of anti-hepatitis virus antibodies. First, we examined whether we can detect antigen-antibody interaction on a sensor chip immobilized hepatitis B virus surface (HBs) antigen and hepatitis C virus (HCV) core antigen using monoclonal mouse antibodies for HBs antigen and HCV core antigen. We obtained significant changes in the reflectance spectra, which indicate specific antigen-antibody interaction for anti-HBs antibody and anti-HCV antibody. Next, we examined the effect of horseradish peroxidase-conjugated secondary antibody using aminoethyl carbazole as the peroxidase substrate and found that the colorimetric reaction increases detection sensitivity for anti-HBs antibody more than 300 times. Finally, we successfully detected anti-HBs antibody in human blood samples with an enhancing method using a peroxidase reaction. Thus, a portable device utilizing a waveguide-mode sensor may be applied to on-site blood testing in emergency settings.

Parallel-incidence-type waveguide-mode sensor with spectral-readout setup.

A waveguide-mode sensor of the spectral-readout type can be used to detect changes in the complex refractive index in the vicinity of the surface of a sensing plate by observing the change in the spectrum of light reflected on the surface. The sensor's configuration can be simplified by adopting a parallel-incidence-type optical setup. To obtain a high sensitivity, the optimization of the sensing-plate structure, incidence angle, and detection wavelength band is essential for the sensor. In the present report, the results predicted by simulations are compared with experimental results in order to evaluate their validity. A discussion of the optimal design for the parallel-incidence-type sensor is also presented, according to the results obtained.

Colorimetric detection of controlled assembly and disassembly of aptamers on unmodified gold nanoparticles.

Aptamers are nucleic acid ligands that are generated artificially by in vitro selection and behave similar to antibodies. The development of aptamer-based sensing systems or strategies has been in vogue for the past few decades, because aptamers are smaller in size, stable, cheaper and undergo easier modifications. Owing to these advantages, several facile aptamer-based colorimetric strategies have been created by controlling the assembly and disassembly of aptamers on unmodified gold nanoparticle probes. As these kinds of assay systems are rapid and can be visualized unaided by instruments, they have recently become an attractive method of choice. The formation of purple-colored aggregates (attraction) from the red dispersed (repulsion) state of GNPs in the presence of mono- or divalent ions is the key principle behind this assay. Due to its simplicity and versatility, this assay can be an alternative to existing diagnostic assays. Here, we have investigated the critical elements involved in colorimetric assays, and have screened different proteins and small ligands to evaluate biofouling on GNPs.

Evaluation of anti-A/Udorn/307/1972 antibody specificity to influenza A/H3N2 viruses using an evanescent-field coupled waveguide-mode sensor.

Discrimination of closely related strains is a key issue, particularly for infectious diseases whose incidence fluctuates according to variations in the season and evolutionary changes. Among infectious diseases, influenza viral infections are a worldwide cause of pandemic disease and mortality. With the emergence of different influenza strains, it is vital to develop a method using antibodies that can differentiate between viral types and subtypes. Ideally, such a system would also be user friendly. In this study, a polyclonal antibody generated against A/Udorn/307/1972 (H3N2) was used as a probe to distinguish between influenza H3N2 viruses based on the interaction between the antibody and hemagglutinin, demonstrating its applicability for viral discrimination. Clear discrimination was demonstrated using an evanescent-field-coupled waveguide-mode sensor, which has appealing characteristics over other methods in the viewpoint of improving the sensitivity, measurement time, portability and usability. Further supporting evidence was obtained using enzyme-linked immunosorbent assays, hemagglutination-inhibition assays, and infectivity neutralization assays. The results obtained indicate that the polyclonal antibody used here is a potential probe for distinguishing influenza viruses and, with the aid of a handheld sensor it could be used for influenza surveillance.

Generation of anti-influenza aptamers using the systematic evolution of ligands by exponential enrichment for sensing applications.

The systematic evolution of ligands by exponential enrichment (SELEX) is a selection process for identifying high-affinity selective molecules from a randomized combinatorial nucleic acid library against a wide range of target molecules. Using a pool of N25 RNA molecules, the SELEX process was performed against two targets from influenza viruses, namely, intact influenza B/Tokio/53/99 and hemagglutinin of infuluenza B Jilin/20/2003. The selection processes were evaluated by surface plasmon fluorescence spectroscopy (SPFS), and the result was compared to that obtained by a conventional radioisotope method. Clear discrimination among different selection cycles was displayed by SPFS, indicating that this method can be used as an alternative method of radioisotope labeling. The dissociation constant of the selected aptamers against the targets was in the low nanomolar range. The sensitivity of the selected aptamer against intact influenza B/Tokio/53/99 to detect the influenza virus was the low ng/mL level, an approximately 250-fold higher sensitivity than that of the commercially obtained antibody. The target binding sites on the aptamer were predicted by mapping analyses. The selected aptamer could discriminate other influenza strains, and the sensitivity of the selected aptamer was further confirmed by gold-nanoparticle-based sensing on a waveguide-mode sensor. This finding demonstrates that the selected aptamer would be useful for detecting influenza viruses at an early stage of infection and for the purpose of influenza surveillance.

Observations of immuno-gold conjugates on influenza viruses using waveguide-mode sensors.

Gold nanoparticles were conjugated to an antibody (immuno-AuNP) against A/Udorn/307/1972 (H3N2) influenza virus to detect viruses on a sensing plate designed for an evanescent field-coupled waveguide-mode sensor. Experiments were conducted using human influenza A/H3N2 strains, and immuno-AuNP could detect 8×10(5) PFU/ml (40 pg/µl) intact A/Udorn/307/1972 and 120 pg/µl A/Brisbane/10/2007. Furthermore, increased signal magnitude was achieved in the presence of non-ionic detergent, as the virtual detection level was increased to 8×10(4) PFU/ml A/Udorn/307/1972. Immuno-AuNPs were then complexed with viruses to permit direct observation, and they formed a ring of confined nanodots on the membrane of both intact and detergent-treated viruses as directly visualized by scanning electron microscopy. With this complex the detection limit was improved further to 8×10(3) PFU/ml on anti-rabbit IgG immobilized sensing plate. These strategies introduce methods for observing trapped intact viruses on the sensing plates generated for optical systems.

A high-performance waveguide-mode biosensor for detection of factor IX using PEG-based blocking agents to suppress non-specific binding and improve sensitivity.

An evanescent-field-coupled waveguide-mode (EFC-WM) sensor utilizes monolithic SiO2/Si/SiO2 sensing plates having a multilayered structure and is used to evaluate a blocking agent comprising poly(ethylene glycol)-based block copolymers. Factor IX (FIX) protein was detected using its aptamer, viz. FIX was immobilized on a glutaraldehyde-modified silica surface, and then treated with a biotinylated aptamer. The quantitative analysis of FIX was carried out using streptavidin-conjugated gold nanoparticles (SA-GNPs). The blocking polymer, poly(ethylene glycol)-b-poly(acrylic acid) (PEG-b-PAAc), was found to mask unreacted amine and glutaraldehyde (Glu) moieties on the SiO2 surface, and it completely prevented the non-specific binding of SA-GNPs. By exploiting the strong blocking effect of PEG-b-PAAc, we achieved high ligand-analyte interaction sensitivity (sensitive down to 100 pM). To improve the sensitivity further, we also used pentaethylenehexamine-terminated PEG (N6-PEG) on GNPs. The improvement in sensitivity was found to be 1000-fold (to 100 fM), which was substantiated by the observation of higher numbers of GNPs on the sensing surface in the results of the scanning electron microscopic examination. Based on the competition assay of free biotin premixed with SA-GNPs, it was concluded that some active biotin-binding sites on the streptavidin were blocked by N6-PEG, which improved the binding ability to the biotinylated sensing surface. An optimum number of binding sites on the SA-GNPs might improve their binding affinity. The strategy shown with dual polymers, viz. blocking of the sensor chip surface and coating of SA-GNPs, is recommended for developing sensors with higher sensitivity and reliability. Selective binding of the aptamer to a very small amount of FIX in the mixed sample containing FXIa and FVIIa, or albumin, makes this the optimal strategy for detecting a FIX deficiency in human blood samples.

Surface functionalization chemistries on highly sensitive silica-based sensor chips.

The surfaces of silica-based sensor chips, designed for evanescent-field-coupled waveguide-mode sensors, were functionalized using various surface chemistries. The immobilization of molecular entities on the functionalized silica surfaces was monitored using various microscopic techniques (scanning electron, fluorescence, and atomic force microscopies). Further, gold nanoparticle-based signal enhancement analyses were performed with protein conjugation on different functionalized surfaces using a waveguide-mode sensor. Based on these analyses, the sensor surfaces modified with glutaraldehyde (Glu) and carbonyldiimidazole were found to be good for molecules of different sizes. In addition, it can be inferred that the Glu-modified surface may be suitable for small molecules with diameters around 5 nm owing to its surface roughness. The modified surface with carbonyldiimidazole is suitable for the direct immobilization of larger molecules especially for biomolecular assemblies without intermediate chemical modifications.

Waveguide-mode sensors as aptasensors.

Aptamers are artificial nucleic acid ligands that can be generated by in vitro selection through partition and amplification. Aptamers can be generated against a wide range of biomolecules through the formation of versatile stem-loop structures. Because aptamers are potential substitutes for antibodies and drugs, the development of an aptamer-based sensor (aptasensor) is mandatory for diagnosis. We previously reported that waveguide-mode sensors are useful in the analysis of a wide range of biomolecular interactions, including aptamers. The advantages of the waveguide-mode sensor that we developed include physical and chemical stability and that higher sensitivity can be achieved with ease by perforating the waveguide layer or using colored materials such as dyes or metal nanoparticles as labels. Herein, we provide an overview of the strategies and applications for aptamer-based analyses using waveguide-mode sensors.

Optimal design of a spectral readout type planar waveguide-mode sensor with a monolithic structure.

Optical planar waveguide-mode sensor is a promising candidate for highly sensitive biosensing techniques in fields such as protein adsorption, receptor-ligand interaction and surface bacteria adhesion. To make the waveguide-mode sensor system more realistic, a spectral readout type waveguide sensor is proposed to take advantage of its high speed, compactness and low cost. Based on our previously proposed monolithic waveguide-mode sensor composed of a SiO2 waveguide layer and a single crystalline Si layer [1], the mechanism for achieving high sensitivity is revealed by numerical simulations. The optimal achievable sensitivities for a series of waveguide structures are summarized in a contour map, and they are found to be better than those of previously reported angle-scan type waveguide sensors.

Shape-sensitive reflectance by nanostructured metal attached on an optical waveguide-mode sensor.

The optical reflectance of He-Ne laser light on a waveguide-mode sensor was measured as a function of light incident angle, in the case of either a metal (Au, Cr or Pt) film or nanoparticles being attached to the waveguide surface of the sensor. A dip appears in the reflectance spectrum as a function of incident angle at the angle where waveguide-mode excitation is induced. It is found that the dip moves toward a lower angle in the case that the attached metal is of a film shape, while it shifts toward a higher angle when the metal is an ensemble of nanoparticles. This difference in the direction of shift can be explained well by theoretical calculations using average refractive indices of the metal-containing layers. The present result indicates that one can estimate whether a metal nanostructure is film-like or an ensemble of spherical nanoparticles by the sensor.

Optimization of silica surface with nanosize holes for immobilization of biomolecules and analysis of their interactions.

An evanescent-field-coupled waveguide-mode sensor of the Kretschmann configuration with a silica waveguide having nanoscale holes is an ideal tool for detection of bimolecular reactions. In the present research, an optimized surface of the sensor with cylindrical nanoscale holes was modified with sodium (1-{[6-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)hexanoyl]oxy}-2,5-dioxopyrrolidine-3-sulfonate) (Sulfo-EMCS) to facilitate the attachment of biomolecules; the resulting surface could be cleaned for reuse simply by changing the pH of the buffering solution. The modification is expected to be useful for wide range of molecular detection.

Detection of colored nanomaterials using evanescent field-based waveguide sensors.

We have developed an optical system designed for detecting colored nanomaterials in aqueous solutions, using the concept of evanescent-field-coupled waveguide-mode sensors. In this study, we found that the waveguide modes induced in the sensor are intrinsically sensitive to a change in optical absorption, or a 'change in color'. The system detects less than one gold nanoparticle (diameter: 20 nm) adsorbed per square micrometer. It is also demonstrated that significant signal enhancement due to adsorption of molecules is achieved using a dye. The developed sensor rarely suffers from a drawback of impurity adsorption. The system is expected to be applied as an effective sensing tool for metal colloids, nanoparticles, and colored biomolecules in solution.

Evaluation of nucleic acid duplex formation on gold over layers in biosensor fabricated using Czochralski-grown single-crystal silicon substrate.

With a view to developing an economical and elegant biosensor chip, we compared the efficiencies of biosensors that use gold-coated single-crystal silicon and amorphous glass substrates. The reflectivity of light over a wide range of wavelengths was higher from gold layer coated single-crystal silicon substrates than from glass substrates. Furthermore, the efficiency of reflection from gold layers of two different thicknesses was examined. The thicker gold layer (100 nm) on the single-crystal silicon showed a higher reflectivity than the thinner gold film (10 nm). The formation of a nucleic acid duplex and aptamer-ligand interactions were evaluated on these gold layers, and a crystalline silicon substrate coated with the 100-nm-thick gold layer is proposed as an alternative substrate for studies of interactions of biomolecules.

Plasmonic activity on gold nanoparticles embedded in nanopores formed in a surface layer of silica glass by swift-heavy-ion irradiation.

Silica glass was irradiated by swift heavy ions by selecting the ion species and its energy in order to induce the largest damaged regions. These regions were then selectively etched by hydrofluoric acid vapour to form nanopores on the glass surface. Subsequently, gold nanoparticles were embedded into the nanopores by vacuum evaporation, followed by thermal treatment. In the new plasmonic structure obtained with these procedures, the localized surface plasmon excitation wavelength induced around the gold nanoparticles was found to show a redshift, which agreed well with the theoretical calculation, when water was introduced into the nanopores. This indicates that the fabricated structure can be used as a sensing element to detect the adhesion of substances such as biomolecules to the nanoparticles by measuring the redshift.

Proposal of a grating-based optical reflection switch using phase change materials.

We have proposed a novel grating-based optical reflection switch using a phase change material (PCM). The device switches on/off light or shifts the light propagation direction by switching the PCM grating between its amorphous and crystalline states. Thus, the switching status is non-volatile and the device is promising for realizing low power consumption. The device structure was designed and optimized by numerical simulations to obtain high switching efficiency. It is shown that there exists a parameter window where high efficiency is achievable. The static switching characteristics were confirmed by finite-difference time-domain (FDTD) simulations. The design scheme can also be applied to other planar dielectric gratings.

Monitoring biological interactions using perforated evanescent-field-coupled waveguide-mode nanobiosensors.

Evanescent-field-coupled (EFC) waveguide-mode sensors recently been shown to be suitable for detecting various biomolecules. In the present studies, we demonstrated that both nucleic acids hybridization and nucleic acids-protein interactions can be analyzed using perforated evanescent-field-coupled waveguide-mode nanobio-sensors.

The fabrication of aligned pairs of gold nanorods in SiO2 films by ion irradiation.

Pairs of gold nanodisks 40 or 70 nm in diameter were fabricated in silica by electron-beam lithography. On irradiation by 110 MeV Br(10+) ions, the nanodisks elongated to form nanorods; elongation occurred in the direction of propagation of the ions. The aspect ratios of the Au nanorods increased with increasing ion-flux density or fluence and with decreasing diameter of the nanodisks. The elongation mechanism can be explained in terms of a thermal spike model.