Full characterization of the amplified spontaneous emission from a diode-pumped high-power laser system.

We present the first complete temporal and spatial characterization of the amplified spontaneous emission (ASE) of laser radiation generated by a diode-pumped high-power laser system. The ASE of the different amplifiers was measured independently from the main pulse and was characterized within a time window of -10ms ≤ t ≤ 10ms and an accuracy of up to 15fs around the main pulse. Furthermore, the focusability and the energy of the ASE from each amplifier was measured after recompression. Using our analysis method, the laser components, which need to be optimized for a further improvement of the laser contrast, can be identified. This will be essential for laser-matter interaction experiments requiring a minimized ASE intensity or fluence.

All-reflective, highly accurate polarization rotator for high-power short-pulse laser systems.

We present the setup of a polarization rotating device and its adaption for high-power short-pulse laser systems. Compared to conventional halfwave plates, the all-reflective principle using three zero-phase shift mirrors provides a higher accuracy and a higher damage threshold. Since plan-parallel plates, e.g. these halfwave plates, generate postpulses, which could lead to the generation of prepulses during the subsequent laser chain, the presented device avoids parasitic pulses and is therefore the preferable alternative for high-contrast applications. Moreover the device is easily scalable for large beam diameters and its spectral reflectivity can be adjusted by an appropriate mirror coating to be well suited for ultra-short laser pulses.

High-efficiency dielectric reflection gratings: design, fabrication, and analysis.

We report on reflection gratings produced entirely of dielectric materials. This gives the opportunity to enhance the laser damage threshold over that occurring in conventional metal gratings used for chirped-pulse-amplification, high-power lasers. The design of the system combines a dielectric mirror and a well-defined corrugated top layer to obtain optimum results. The rules that have to be considered for the design optimization are described. We optimized the parameters of a dielectric grating with a binary structure and theoretically obtained 100% reflectivity for the -1 order in the Littrow mounting for a 45 degrees angle of incidence. Subsequently we fabricated gratings by structuring a low-refractive-index top layer of a multilayer stack with electron-beam lithography. The multilayer system was fabricated by conventional sputtering techniques onto a flat fused-silica substrate. The parameters of the device were measured and controlled by light scatterometer equipment. We measured 97% diffraction efficiency in the -1 order and damage thresholds of 4.4 and 0.18 J/cm(2) with 5-ns and 1-ps laser pulses, respectively, at a wavelength of 532 nm in working conditions.