Impact of scanning range and image count on the precision of digitally recorded intermaxillary relationships in interocclusal record using intraoral scanner.

PURPOSE: The effect of scan range and the number of scanned images on the precision of in vivo intermaxillary relationship reproduction was evaluated using digital scans acquired with an intraoral scanner. METHODS: The study involved 15 participants with normal occlusion. Two different interocclusal recording settings were employed using the intraoral scanner (TRIOS 4): 'MIN,' focusing on the minimal scan range of the first molar region, and 'MAX,' including the scan range from the right first premolar to the right second molar. These settings were combined with three different image counts, resulting in six experimental conditions. Interocclusal recordings were performed four times for each condition. Dimensional discrepancies between datasets were analyzed using three-dimensional morphometric software and compared using two-way analysis of variance. RESULTS: Median dimensional discrepancies (interquartile range; IQR) of 39.2 (30.7-49.4), 42.2 (32.6-49.3), 30.3 (26.8-44.1), 20.1 (16.0-34.8), 21.8 (19.0-25.1), and 26.6 (19.9-34.5) µm were found for MIN/200, MIN/400, MIN/600, MAX/200, MAX/400, and MAX/600, respectively. Significant differences in dimensional discrepancies according to scan range were found. Wilcoxon signed-rank test showed significant differences between MAX and MIN (P < 0.01). CONCLUSION: Scan range may affect the precision of intermaxillary relationship reproduction. Thus, scanning of the most extensive region practically achievable is recommended.

Supersulfides support bone growth by promoting chondrocyte proliferation in the growth plates.

OBJECTIVES: While chondrocytes have mitochondria, they receive little O2 from the bloodstream. Sulfur respiration, an essential energy production system in mitochondria, uses supersulfides instead of O2. Supersulfides are inorganic and organic sulfides with catenated sulfur atoms and are primarily produced by cysteinyl tRNA synthetase-2 (CARS2). Here, we investigated the role of supersulfides in chondrocyte proliferation and bone growth driven by growth plate chondrocyte proliferation. METHODS: We examined the effects of NaHS, an HS-/H2S donor, and cystine, the cellular source of cysteine, on the proliferation of mouse primary chondrocytes and growth of embryonic mouse tibia in vitro. We also examined the effect of RNA interference acting on the Cars2 gene on chondrocyte proliferation in the presence of cystine. RESULTS: NaHS (30 µmol/L) enhanced tibia longitudinal growth in vitro with expansion of the proliferating zone of their growth plates. While NaHS (30 µmol/L) also promoted chondrocyte proliferation only under normoxic conditions (20 % O2), cystine (0.5 mmol/L) promoted it under both normoxic and hypoxic (2 % O2) conditions. Cars2 gene knockdown abrogated the ability of cystine (0.5 mmol/L) to promote chondrocyte proliferation under normoxic conditions, indicating that supersulfides produced by CARS2 were responsible for the cystine-dependent promotion of bone growth. CONCLUSIONS: The presented results indicate that supersulfides play a vital role in bone growth achieved by chondrocyte proliferation in the growth plates driven by sulfur respiration.

TiNbSn stems with gradient changes of Young's modulus and stiffness reduce stress shielding compared to the standard fit-and-fill stems.

BACKGROUND: The difference between Young's moduli of the femur and the stem causes stress shielding (SS). TiNbSn (TNS) stem has a low Young's modulus and strength with gradient functional properties during the change in elastic modulus with heat treatment. The aim of this study was to investigate the inhibitory effect of TNS stems on SS and their clinical outcomes compared to conventional stems. METHODS: This study was a clinical trial. Primary THA was performed using a TNS stem from April 2016 to September 2017 for patients in the TNS group. Unilateral THA was performed using a Ti6Al4V alloy stem from January 2007 to February 2011 for patients in the control group. The TNS and Ti6Al4V stems were matched in shape. Radiographs were obtained at the 1- and 3-year follow-ups. Two surgeons independently checked the SS grade and appearance of cortical hypertrophy (CH). The Japanese Orthopaedic Association (JOA) scores before and 1 year after surgery were assessed as clinical scores. RESULTS: None of the patients in the TNS group had grade 3 or 4 SS. In contrast, in the control group, 24% and 40% of patients had grade 3 and 4 SS at the 1- and 3-year follow-ups, respectively. The SS grade was lower in the TNS group than in the control group at the 1- and 3-year follow-ups (p < 0.001). The frequencies of CH in both groups were no significant difference at the 1- and 3-year follow-ups. The JOA scores of the TNS group significantly improved at 1 year after surgery and were comparable to control group. CONCLUSION: The TNS stem reduced SS at 1 and 3 years after THA compared to the proximal-engaging cementless stem, although the shapes of the stems matched. The TNS stem could reduce SS, stem loosening, and periprosthetic fractures. TRIAL REGISTRATION: Current Controlled Trials. ISRCTN21241251. https://www.isrctn.com/search?q=21241251 . The date of registration was October 26, 2021. Retrospectively registered.

Long-term results of Chiari pelvic osteotomy on the preservation of hip function with mean follow-up of more than 30 years and its prognostic factors.

BACKGROUND: Clinical outcomes of Chiari pelvic osteotomy for acetabular dysplasia, including conversion to total hip arthroplasty (THA), have not been adequately explored. The purpose of this study was to examine the long-term results and clinical outcomes of Chiari pelvic osteotomy as the primary outcome and to analyze its prognostic factors as the second outcome. METHODS: This study was a multicenter, retrospective cohort study. Ninety-seven patients underwent Chiari pelvic osteotomy at three hospitals between March 1975 and October 1997. The long-term clinical outcomes of Chiari pelvic osteotomy, including conversion to THA and hip pain, were analyzed using the Kaplan-Meier method. In addition, the prognostic factors for conversion to THA after Chiari pelvic osteotomy were evaluated with clinical variables and radiographic parameters. RESULTS: The study included 51 hips in 45 patients (4 men and 41 women) with long-term follow-up. The survival rates assessed by Kaplan-Meier analysis with conversion to THA as an endpoint, were 90.2% (95% confidence interval (CI) 82.0-98.4%) at 20 years and 73.5% (95% CI 61.1-86.0%) at 30 years. In contrast, the Kaplan-Meier survival rates with the Japanese Orthopaedic Association hip score for pain ≤20 as an endpoint, were 86.3% (95% CI 76.8-95.7%) at 20 years and 65.6% (95% CI 52.3-79.0%) at 30 years. Only older age at osteotomy was the significantly poor prognostic factor for conversion to THA, with a hazard ratio of 1.11/year, 95% CI 1.06 to 1.18, (p < 0.01). CONCLUSION: Chiari pelvic osteotomy may still be a good alternative to bony reconstructive surgery for acetabular dysplasia especially in young patients. Only older age at the osteotomy was related to the poor prognosis of preserving hip function.

Novel model-less fully digital workflow for implant superstructures in an esthetic zone: A technical report.

PURPOSE: This report introduces a fully digital workflow for the fabrication of implant superstructures in an esthetic zone using an intraoral scanner (IOS), computer-aided design/computer-aided manufacturing (CAD/CAM) technology, and monolithic multilayer zirconia. METHODS: Digital impressions of scan bodies and occlusal registration were made in the esthetic zone using an IOS. The provisional restoration in the oral cavity was scanned, and the provisional restoration with an optimized surface morphology of the subgingival contour was scanned outside the oral cavity. These morphological data were integrated into the CAD software to generate a digital cast. The morphology of the final superstructure was generated based on morphological data of the provisional restoration. The final superstructure was fabricated from monolithic multilayer zirconia using a CAM machine, sintered, colored with a stain material, and subsequently bonded to a titanium base using resin cement. CONCLUSIONS: The superstructure was successfully fabricated using a model-less, fully digital workflow, and delivered to the patient. No clinical complications were reported. Thus, within the limitations of this report, the novel developed superstructure fabrication techniques can change the clinical and laboratory workflows from analog to digital in the esthetic zone.

Genome-Wide Association Study and Transcriptome of Japanese Patients with Developmental Dysplasia of the Hip Demonstrates an Association with the Ferroptosis Signaling Pathway.

This study examined the association between developmental dysplasia of the hip (DDH) and disease-associated loci in a Japanese cohort. A genome-wide association study (GWAS) of 238 Japanese patients with DDH and 2044 healthy individuals was performed. As a replicate, GWAS was also conducted on the UK Biobank data with 3315 cases and matched 74,038 controls. Gene set enrichment analyses (GSEAs) of both the genetics and transcriptome of DDH were performed. Transcriptome analysis of cartilage specimens from DDH-associated osteoarthritis and femoral neck fractures was performed as a control. Most of the lead variants were very low-frequency ones in the UK, and variants in the Japanese GWAS could not be replicated with the UK GWAS. We assigned DDH-related candidate variants to 42 and 81 genes from the Japanese and UK GWASs, respectively, using functional mapping and annotation. GSEA of gene ontology, disease ontology, and canonical pathways identified the most enriched pathway to be the ferroptosis signaling pathway, both in the Japanese gene set as well as the Japanese and UK merged set. Transcriptome GSEA also identified significant downregulation of genes in the ferroptosis signaling pathway. Thus, the ferroptosis signaling pathway may be associated with the pathogenic mechanism of DDH.

Three-dimensional evaluation of sleep bruxism-related splint wear using a dental laboratory scanner: A preliminary clinical study.

BACKGROUND: The wear depth on the occlusal splint (OS) is reportedly associated with the sleep bruxism (SB) level, as evaluated using portable polysomnography (PSG) recordings. However, the OS is deformed owing to SB forces, possibly preventing the accurate quantification of the wear facets. OBJECTIVES: We aimed to introduce a newly developed system to quantify the wear facets on the OS using a dental laboratory scanner (D810) and investigate the association between the wear facets, as evaluated with this system, and the SB level. METHODS: Ten healthy individuals who were diagnosed with SB based on portable PSG recordings participated in this study. They were asked to wear the OS for 2 months. The first day after a 2-week adaptation period was defined as the reference day, and sequential scanning of the OS surface was performed on days 15, 30, and 45. Changes in the OS surface from the reference day allowed dimensional evaluation of the wear facets in terms of maximum wear depth, wear area, and wear volume. Multiple regression analyses were conducted to test whether each of these variables could be predicted by any of the SB-related variables. RESULTS: The total duration of SB episodes per hour of sleep and the maximum muscle activity were significantly associated with the wear area, as measured with our system (adjusted R-squared was .78, p < .01). CONCLUSION: Our system allows dimensional analysis of the wear facets on the OS surface in association with the SB level.

Osteogenic capacity of octacalcium phosphate involving macrophage polarization.

Previous research has found that octacalcium phosphate (OCP) increases macrophage accumulation and alters the initial inflammatory response. However, the role of the immune response induced by OCP in osteogenesis remains unknown. This study investigated the behavior of macrophages and bone regeneration capacity during the early inflammatory stage of OCP-mediated osteogenesis. To assess the change in macrophage polarization and osteogenic capacity, we used a standardized rat defect model filled with OCP or calcium-deficient hydroxyapatite (CDHA)-a material obtained through the hydrolysis of the original OCP. OCP or CDHA granules were incubated with RAW264 cells for 5 days to investigate the effect of physicochemical characteristics on macrophage cytokine/chemokine expression in vitro. Our in vivo results show that due to the OCP implantation, macrophages in the rat tibial defect area tend to polarize to the M2 phenotype (anti-inflammatory) and inhibit the formation of the M1 phenotype (pro-inflammatory). In comparison to CDHA, OCP exhibited superior bone regeneration potential due to its rapid promotion of cortical bone healing and stimulation of macrophage-related growth factors. Furthermore, our in vitro results have shown that OCP regulates the expression of macrophage chemokines over time. Compared to incubation with CDHA, incubation with OCP caused changes in the ionic microenvironment. These findings suggest that the OCP-mediated macrophage polarization and secretion profile not only regulate immune function but also positively affect osteogenesis.

Diagnostic accuracy of ambulatory polysomnography with electroencephalogram for detection of sleep bruxism-related masticatory muscle activity.

STUDY OBJECTIVES: This study investigated the diagnostic accuracy of Sleep Profiler, which relies on ambulatory polysomnography (PSG) with electroencephalogram for sleep bruxism (SB) and examined its episode-by-episode agreement in comparison to PSG equipped with audiovisual recordings (avPSG). METHODS: This prospective 2-gate study recruited 10 individuals with probable SB and 10 healthy volunteers. Overnight experimental recordings were performed simultaneously using the ambulatory PSG with masseter electromyography and avPSG with masseter and temporalis electromyography. Sleep staging was performed manually for avPSG and automatically or manually for ambulatory PSG. SB episodes were manually scored based on electromyography signals with reference to sleep stages. The episode-by-episode agreement was analyzed by setting avPSG as the reference standard. The sensitivity, specificity, and accuracy for the diagnosis of SB were calculated after optimizing the cutoff values of the episode index and the burst index. RESULTS: Regarding the episode-by-episode agreement, median sensitivities were 0.825 and positive predictive values were approximately 0.6, regardless of the sleep staging procedure, indicating that approximately 40% of the overall total SB episodes scored by the ambulatory PSG were false positives. Because of overestimation of SB episodes, the optimal cutoff values for the episode index and the burst index were approximately 1.5 times higher than the avPSG-based cutoff values and dramatically improved the diagnostic precision metrics for the ambulatory PSG. CONCLUSIONS: Sleep Profiler can eliminate events during wakefulness by electroencephalogram and may provide a definitive diagnosis in patients with possible SB by applying optimized cutoff values. However, the risk of overestimation must be recognized. CLINICAL TRIAL REGISTRATION: Registry: UMIN Clinical Trials Registry; Name: Accuracy of Portable PSG Device for Detection of Sleep Bruxism-Related Masseter EMG Muscle Activity; URL: https://center6.umin.ac.jp/cgi-open-bin/ctr_e/ctr_view.cgi?recptno=R000037380; Identifier: UMIN000032793. CITATION: Abe Y, Nakazato Y, Takaba M, Kawana F, Baba K, Kato T. Diagnostic accuracy of ambulatory polysomnography with electroencephalogram for detection of sleep bruxism-related masticatory muscle activity. J Clin Sleep Med. 2023;19(2):379-392.

Prosthodontic treatment can improve the ingestible food profile in Japanese adult outpatients.

PURPOSE: To investigate the effect of prosthodontic treatment on the ingestible food profile in adult Japanese outpatients, and to identify the related risk factors that can deteriorate the profile. METHODS: The participants were 277 outpatients who visited university-based specialty clinics in Japan for prosthodontic treatment. The demographic data, number of present teeth assessed via intraoral examination, and oral health-related quality of life assessed by the total Oral Health Impact Profile (OHIP-J54) scores of all participants were recorded before treatment. Ingestible food profile score (IFS) was recorded using a validated food intake questionnaire. Eligible participants who answered the questionnaire before and after treatment were categorized into five groups based on the prosthodontic treatments they received (i.e., crowns, bridges, removable partial dentures, removable complete dentures, and removable complete and partial dentures). RESULTS: Multivariate analysis of covariance revealed a statistically significant main effect of prosthodontic intervention (time course: before and after treatment) on mean IFS (P=0.035, F=4.526), even after adjusting for covariates (age, number of present teeth, and treatment modality). Multiple linear regression analysis revealed that the low number of present teeth (r=0.427, P<0.001) and a high OHIP-J54 total score (r=-0.519, P<0.001) of the patients at the baseline were significantly associated with their baseline IFSs, even after adjusting for confounding variables. CONCLUSIONS: The findings of this multicenter follow-up study indicate the importance of prosthodontic rehabilitation in improving patients' ingestible food profiles.

Impact of number of functional teeth on independence of Japanese older adults.

AIM: To examine the relationship between the number of present and functional teeth at baseline and future incidence of loss of independence. METHODS: Participants were community-dwelling older individuals who participated in a comprehensive geriatric health examination conducted in Kusatsu town, Japan, between 2009 and 2015. The primary endpoint was the incidence of loss of independence among participants, defined as the first certification of long-term care insurance in Japan. The numbers of present and functional teeth at baseline were determined via an oral examination. Demographics, clinical variables (e.g., history of chronic diseases and psychosocial factors), blood nutritional markers, physical functions, and perceived masticatory function were assessed. RESULTS: This study included 1121 individuals, and 205 individuals suffered from loss of independence during the follow-up period. Kaplan-Meier estimates of loss of independence for participants with smaller numbers of present and functional teeth were significantly greater than for those with larger numbers of teeth. Cox proportional hazard analyses indicated that a smaller number of present teeth was not a significant risk factor after adjusting for demographic characteristics. However, the number of functional teeth was a significant risk factor after the adjustment (hazard ratio: 1.975 [1.168-3.340]). Additionally, higher hazard ratios were observed in other adjusted models, but they were not statistically significant. CONCLUSIONS: The number of functional teeth may be more closely related to the future incidence of loss of independence than the number of present teeth. This novel finding suggests that prosthodontic rehabilitation for tooth loss possibly prevents the future incidence of this life-event. Geriatr Gerontol Int 2022; 22: 1032-1039.

Oral function of implant-assisted removable partial dentures with magnetic attachments using short implants: A prospective study.

OBJECTIVES: This prospective study aimed to compare the oral functions of removable partial dentures (RPDs) with those of implant-assisted removable partial dentures (IARPDs) with short implants and magnetic attachments in patients with mandibular Kennedy class I and II. MATERIAL AND METHODS: Thirty participants with mandibular Kennedy class I or II and at least three distal missing teeth were recruited. Oral functions, including mixing ability, comminuting ability, maximum bite force, and occlusal contact area, were assessed for RPDs (stage 0), IARPDs with healing caps (stage 1), and IARPDs with magnetic attachments (stage 2). The implants were loaded with occlusal force in stages 1 and 2. Finally, the data of the 27 participants who completed the evaluation at stage 2 were analyzed. The Wilcoxon signed-rank test with Bonferroni correction was used to assess the differences in the oral functions among the different stages. RESULTS: The implant survival rate was 93.8%. There were significant differences in the comminuting ability and occlusal contact area between stages 0 and 2 (p < .001 and p = .036, respectively) and stages 1 and 2 (p = .003 and p = .015, respectively). Regarding the maximum bite force, there was a significant difference between stages 1 and 2 (p = .018). However, there was no significant difference in the mixing ability between the three stages. CONCLUSIONS: Within the limitations of this study, it was concluded that IARPDs in the mandible with short implants and magnetic attachments may improve oral functions.

Current complications and issues of implant superstructure.

The purpose of this review is to search for complications of dental implant superstructures and consider the issues involved. This narrative review was performed by searching through PubMed databases and review articles that were published after 1990. Misfitting of the superstructure can result in loosening of screws, reduced preload, and in some cases, significant stress around the implant. External connection modalities and single implant prostheses have been reported to have more loose or broken abutment screws. In addition, when zirconia abutment was used for platform shifting, the rate of fracture of the abutment was considered to be high. Additionally, it was reported that men were significantly at an increased risk of abutment fracture. As for the retention mechanism of implant overdenture, stud attachment (Locator type) should receive more attention to wear and damage of retention parts than other attachments. The causes of the complications of implant superstructures have not been clarified in some cases, and further verification is required. Verification of complications is considered important to obtain a long-term prognosis for superstructures of implants. It will be necessary to further verify complications of implants in the future.

Octacalcium Phosphate/Gelatin Composite (OCP/Gel) Enhances Bone Repair in a Critical-sized Transcortical Femoral Defect Rat Model.

BACKGROUND: Bone grafting is widely used to treat large bone defects. A porous composite of a bioactive octacalcium phosphate material with gelatin sponge (OCP/Gel) has been shown to biodegrade promptly and be replaced with new bone both in animal models of a membranous bone defect and a long bone defect. However, it is unclear whether OCP/Gel can regenerate bone in more severe bone defects, such as a critical-size transcortical defect. QUESTIONS/PURPOSES: Using an in vivo rat femur model of a standardized, transcortical, critical-size bone defect, we asked: Compared with a Gel control, does OCP/Gel result in more newly formed bone as determined by (1) micro-CT evaluation, (2) histologic and histomorphometric measures, and (3) osteocalcin staining and tartrate-resistant acid phosphatase staining? METHODS: Thirty-four 12-week-old male Sprague-Dawley rats (weight 356 ± 25.6 g) were used. Gel and OCP/Gel composites were prepared in our laboratory. Porous cylinders 3 mm in diameter and 4 mm in height were manufactured from both materials. The OCP/Gel and Gel cylinders were implanted into a 3-mm-diameter transcortical critical-size bone defect model in the left rat femur. The OCP/Gel and Gel were randomly assigned, and the cylinders were implanted. The biological responses of the defect regions were evaluated radiologically and histologically. At 4 and 8 weeks after implantation, CT evaluation, histological examination of decalcified samples, and immunostaining were quantitatively performed to evaluate new bone formation and remaining bone graft substitutes and activity of osteoblasts and osteoclast-like cells (n = 24). Qualitative histological evaluation was performed on undecalcified samples at 3 weeks postimplantation (n = 10). CT and decalcified tissue analysis was not performed blinded, but an analysis of undecalcified specimens was performed under blinded conditions. RESULTS: Radiologic analysis revealed that the OCP/Gel group showed radiopaque regions around the OCP granules and at the edge of the defect margin 4 weeks after implantation, suggesting that new bone formation occurred in two ways. In contrast, the rat femurs in the Gel group had a limited radiopaque zone at the edge of the defect region. The amount of new bone volume analyzed by micro-CT was higher in the OCP/Gel group than in the Gel group at 4 and 8 weeks after implantation (​​4 weeks after implantation: OCP/Gel versus Gel: 6.1 ± 1.6 mm 3 versus 3.4 ± 0.7 mm 3 , mean difference 2.7 [95% confidence interval (CI) 0.9 to 4.5]; p = 0.002; intraclass correlation coefficient [ICC] 0.72 [95% CI 0.29 to 0.91]; 8 weeks after implantation: OCP/Gel versus Gel: 3.9 ± 0.7 mm 3 versus 1.4 ± 1.1 mm 3 , mean difference 2.5 [95% CI 0.8 to 4.3]; p = 0.004; ICC 0.81 [95% CI 0.47 to 0.94]). Histologic evaluation also showed there was a higher percentage of new bone formation in the OCP/Gel group at 4 and 8 weeks after implantation (​​4 weeks after implantation: OCP/Gel versus Gel: 31.2% ± 5.3% versus 13.6% ± 4.0%, mean difference 17.6% [95% CI 14.2% to 29.2%]; p < 0.001; ICC 0.83 [95% CI 0.53 to 0.95]; 8 weeks after implantation: OCP/Gel versus Gel: 28.3% ± 6.2% versus 9.5% ± 1.9%, mean difference 18.8% [95% CI 11.3% to 26.3%]; p < 0.001; ICC 0.90 [95% CI 0.69 to 0.97]). Bridging of the defect area started earlier in the OCP/Gel group than in the Gel group at 4 weeks after implantation. Osteocalcin immunostaining showed that the number of mature osteoblasts was higher in the OCP/Gel group than in the Gel group at 4 weeks (OCP/Gel versus Gel: 42.1 ± 6.5/mm 2 versus 17.4 ± 5.4/mm 2 , mean difference 24.7 [95% CI 16.2 to 33.2]; p < 0.001; ICC 0.99 [95% CI 0.97 to 0.99]). At 4 weeks, the number of osteoclast-like cells was higher in the OCP/Gel composite group than in the Gel group (OCP/Gel versus Gel: 3.2 ± 0.6/mm 2 versus 0.9 ± 0.4/mm 2 , mean difference 2.3 [95% CI 1.3 to 3.5]; p < 0.001; ICC 0.79 [95% CI 0.35 to 0.94]). CONCLUSION: OCP/Gel composites induced early bone remodeling and cortical bone repair in less time than did the Gel control in a rat critical-size, transcortical femoral defect, suggesting that OCP/Gel could be used as a bone replacement material to treat severe bone defects. CLINICAL RELEVANCE: In a transcortical bone defect model of critical size in the rat femur, the OCP/Gel composite demonstrated successful bone regeneration. Several future studies are needed to evaluate the clinical application of this interesting bone graft substitute, including bone formation capacity in refractory fracture and spinal fusion models and the comparison of bone strength after repair with OCP/Gel composite to that of autologous bone.

Particle Size Analysis in Aerosol-Generating Dental Procedures Using Laser Diffraction Technique.

The global outbreak of coronavirus disease 2019 (COVID-19) has raised concerns about the risk of airborne infection during dental treatment. Aerosol-generating dental procedures (AGDP) produce droplets and aerosols, but the details of the risks of COVID-19 transmission in AGDP are not well-understood. By discriminating between droplets and aerosols, we devised a method to measure particle size using laser diffraction analysis and evaluated aerosols generated from dental devices for providing a basis for proper infection control procedures. The droplets and aerosols generated from dental devices were characterized by multimodal properties and a wide range of droplet sizes, with the majority of droplets larger than 50 µm. AGDP emitted few aerosols smaller than 5 µm, which are of concern for pulmonary infections due to airborne transmission. In addition, the use of extraoral suction was found to prevent the spread of aerosols from high-speed dental engines. This study suggests that the risk of aerosol infections is considerably limited in regular dental practice and that current standard precautions, such as mainly focusing on protection against droplet and contact infections, are sufficient. While several cases of airborne transmission of COVID-19 in general clinics and emergency hospitals have been reported, cluster outbreaks in dental clinics have not yet been reported, which may indicate that AGDP does not pose a significant threat in contributing to the spread of SARS-CoV-2.

Increased excitability of human iPSC-derived neurons in HTR2A variant-related sleep bruxism.

Sleep bruxism (SB) is a sleep-related movement disorder characterized by grinding and clenching of the teeth during sleep. We previously found a significant association between SB and a single nucleotide polymorphism (SNP), rs6313, in the neuronal serotonin 2A receptor gene (HTR2A), and established human induced pluripotent stem cell (iPSC)-derived neurons from SB patients with a genetic variant. To elucidate the electrophysiological characteristics of SB iPSC-derived neural cells bearing an SB-related genetic variant, we generated ventral hindbrain neurons from SB patients and unaffected controls, and explored the intrinsic membrane properties of these neurons using the patch-clamp technique. We found that the electrophysiological properties of iPSC-derived neurons mature in a time-dependent manner in long-term control cultures. SB neurons exhibited higher action potential firing frequency, higher gain, and shorter action potential half duration. This is the first in vitro modeling of SB using patient-specific iPSCs. The revealed electrophysiological characteristics may serve as a benchmark for further investigation of pathogenic mechanisms underlying SB. Moreover, our results on long-term cultures provide a strategy to define the functional maturity of human neurons in vitro, which can be implemented for stem cell research of neurogenesis, and neurodevelopmental disorders.

Impacts of external rotators and the ischiofemoral ligament on preventing excessive internal hip rotation: a cadaveric study.

BACKGROUND: This study examined the biomechanics of preventing excessive internal hip joint rotation related to the hip flexion angle. METHOD: An intramedullary nail with a circular plate equipped with a protractor was installed in the femur of nine normal hips. The circular plate was pulled by 3.15 Nm of force in the internal rotation direction. The external rotators were individually resected, finally cutting the ischiofemoral ligament. The cutting order of the external rotators differed on each side to individually determine the internal rotation resistance. The external rotators were resected from the piriformis to the obturator externus in the right hips and the reverse order in the left hips. Traction was performed after excising each muscle and ischiofemoral ligament. Measurements were taken at 0°, 30°, and 60° of hip flexion, and the differences from baseline were calculated. RESULTS: For the right hip measurements, the piriformis and ischiofemoral ligament resection significantly differed at 0° of flexion (p = 0.02), each external rotator and the ischiofemoral ligament resections significantly differed at 30° of flexion (p < 0.01), and the ischiofemoral ligament and piriformis and inferior gemellus resections significantly differed at 60° of flexion (p = 0.04 and p = 0.02, respectively). In the left hips, the ischiofemoral ligament and obturator externus, inferior gemellus, and obturator internus resections significantly differed at 0° of flexion (p < 0.01, p < 0.01, and p = 0.01, respectively), as did each external rotator and the ischiofemoral ligament resections at 30° of flexion (p < 0.01). CONCLUSION: The ischiofemoral ligament primarily restricted the internal rotation of the hip joint. The piriformis and obturator internus may restrict internal rotation at 0° and 60° of flexion.

Effects of vibratory feedback stimuli through an oral appliance on sleep bruxism: a 6-week intervention trial.

PURPOSE: Various biofeedback stimulation techniques of managing sleep bruxism (SB) have recently emerged; however, the effect of successive application of vibratory feedback stimulation has not been clarified. This study elucidated the effect of vibration feedback stimulation via an oral appliance (OA) on SB when vibration feedback was applied for 4 weeks. METHODS: This was a prospective, single-arm, open-label, intervention study. Ten participants diagnosed with "definite" SB wore a specially designed OA for 45 nights in a home-setting. A force-based SB detection system, including a pressure-sensitive piezoelectric film placed internally in the OA, triggered a vibrator attached to the OA. Vibratory stimulation was withheld during the first 2-week adaptation period (1st-15th nights), applied during the 4-week stimulation period (16th-43rd nights), and again withheld during the post-stimulation period (44th and 45th nights). The number and duration of SB episodes/hour of sleep were calculated based on masseter electromyographic activity recorded with in-home portable polysomnography and compared between the 15th and 45th nights (without stimulation) and the 17th and 43rd nights (with stimulation). RESULTS: The number and duration of SB episodes significantly decreased after vibratory stimulation (15th vs. 17th nights: p = 0.012 and p = 0.012, respectively), then significantly increased upon cessation of vibratory stimulation after the stimulation period (43rd vs. 45th nights: p = 0.023 and p = 0.023, respectively). CONCLUSION: Contingent vibratory stimulation through an OA may suppress SB-related masticatory muscle activity continuously for 4 weeks and may be an effective alternative for the management of SB. TRIAL REGISTRATION: https://jrct.niph.go.jp/ ; trial registration number: jRCTs032190225.

Clinical evaluation of the precision of interocclusal registration by using digital and conventional techniques.

STATEMENT OF PROBLEM: Although studies have evaluated the accuracy of data obtained by intraoral scanners (IOSs), studies on the precision of interocclusal registrations made with IOSs are lacking. PURPOSE: The purpose of this clinical study was to compare the precision of IOS interocclusal registration with that of conventional methods with a silicone impression material and a gypsum cast. MATERIAL AND METHODS: Eight participants with complete natural dentitions were enrolled. Images of their maxillary and mandibular quadrant arches and their interocclusal relationship were scanned with 2 IOSs: the 3M True Definition Scanner and the TRIOS Scanner 3. In the conventional method, impressions of complete-arch dentition and quadrant-arch dentition were made with a silicone impression material, and gypsum casts were fabricated, mounted on a dental articulator related with a silicone interocclusal record, and scanned with a 3D laboratory scanner. These procedures were repeated 4 times, and 4 sets of interocclusal registration data in standard tessellation language (STL) format were generated for each condition. Interocclusal registration precision was evaluated by determining the discrepancy of the STL data between repeated measurements by using the best-fit-algorithm method. RESULTS: The average discrepancies for all participants were 25 ±12 µm for the True Definition, 31 ±7 µm for the TRIOS 3, 154 ±59 µm for the complete arch, and 128 ±33 µm for the quadrant arch. The Kruskal-Wallis test revealed that the effect of the impression methods on the discrepancy was statistically significant (P<.001). The Steel-Dwass test showed that both digital scan methods exhibited significantly smaller discrepancies than the 2 conventional methods (P=.005). CONCLUSIONS: These results suggest that the intermaxillary relationship captured by the digital scan method by using IOSs had better precision than that obtained by the conventional method.

Shear bond strength of an acrylic resin to a ceria-stabilized zirconia-alumina nanocomposite.

STATEMENT OF PROBLEM: Ceria-stabilized zirconia-alumina nanocomposite (Ce-TZP-Al2O3) has properties that may be suitable for partial denture frameworks. However, studies on its adhesion strength and durability with denture base resin are lacking. PURPOSE: The purpose of this in vitro study was to determine the optimal surface treatment for Ce-TZP-Al2O3 to secure a durable bond with an acrylic resin. MATERIAL AND METHODS: The surface of Ce-TZP-Al2O3 test specimens was alumina airborne-particle abraded (Group APA) and then treated with 10-methacryloyloxydecyl dihydrogen phosphate (MDP) (Group MDP) and 2 silica coating methods: the flame spraying method (Group SLP) and the tribochemical treatment (110 µm: Group TRB-P, 30 µm: Group TRB-S). TRB-P and TBR-S were further treated by MDP (Group CBT-P and CBT-S). Autopolymerizing acrylic resin was bonded to the specimens, and the shear bond strength was tested after thermocycling (5 °C and 60 °C, 10 000 cycles). The area of the resin remaining on the fractured surfaces was also measured. To evaluate the effect of the surface treatment condition on shear bond strength and the resin remaining, 1-way analysis of variance (ANOVA) was conducted, followed by the Tukey multiple comparison post hoc test. Additionally, the effect of thermocycling on the specimens was evaluated by the Student t test. RESULTS: After placement in deionized water for 24 hours, the shear bond strengths of Group MDP and 2 types of combination treatment (Groups CBT-P and CBT-S) were significantly higher than those of Groups SLP, TRB-P, and TRB-S (P<.05). Moreover, the fractured surface of all the treatment conditions except Group APA showed cohesive failure. The shear bond strength as a result of all treatment conditions decreased significantly after thermocycling (P<.05). Group CBT-S showed the highest shear bond strength; however, no significant differences were found between Groups CBT-S and MDP (P=.908). In particular, the area of resin remaining on the fractured surfaces of Group CBT-S was 100% (cohesive failure). CONCLUSIONS: The combined surface treatment of alumina airborne-particle abrasion and tribochemical treatment, along with primer treatment using silane coupling and an MDP monomer, improved the adhesion strength and adhesion durability between base resins and Ce-TZP-Al2O3.