A new type of C+⋯Hδ-(C=) bond in adducts of vinyl carbocations with alkenes.

By X-ray diffraction analysis and IR spectroscopy, it was established here that vinyl carbocations C3H5+/C4H7+ with carborane counterion CHB11Cl11- form stable monosolvates C3H5+⋅C3H6/C4H7+⋅C4H8 with molecules of alkenes C3H6/C4H8. They contain molecular group =C+⋯Hδ--Cδ+= with a new type of bond formed by the H atom of the H-C= group of the alkene with the C atom of the C+=C group of the carbocation. The short C+----Cδ+ distance, equal to 2.44 Å, is typical of that of X----X in proton disolvates (L2H+) with an quasi-symmetrical X-H+⋯X moiety (where X = O or N) of basic molecule L. The nature of the discovered bond differs from that of the classic H-bond by an distribution of electron density: the electron-excessive Hδ- atom from the (=)C-H group of the alkene is attached to the C+ atom of the carbocation, on which the positive charge is predominantly concentrated. Therefore, it can be called an inverse hydrogen bond.

Hysteretic Room-Temperature Magnetic Bistability of the Crystalline 4,7-Difluoro-1,3,2-Benzodithiazolyl Radical.

The title radical R⋅, synthesized by reduction of the corresponding cation R+ , is thermally stable up to ~380 K in the crystalline state under anaerobic conditions. With SQUID magnetometry, single-crystal and powder XRD, solid-state EPR and TG-DSC, reversible spin-Peierls transition between diamagnetic and paramagnetic states featuring ~10 K hysteretic loop is observed for R⋅ in the temperature range ~310-325 K; ΔH=~2.03 kJ mol-1 and ΔS=~6.23 J mol-1 K-1 . The transition is accompanied by mechanical movement of the crystals, i. e., by thermosalient behavior. The low-temperature diamagnetic P-1 polymorph of R⋅ consists of R⋅2 π-dimers arranged in (…R⋅2 …)n π-stacks; whereas the high-temperature paramagnetic P21 /c polymorph, of uniform (…R⋅…)n π-stacks. With the XRD geometries, CASSCF and broken-symmetry DFT jointly suggest strong antiferromagnetic (AF) interactions within R⋅2 and weak between R⋅2 for the (…R⋅2 …)n stacks; and moderate AF interactions between R⋅ for the (…R⋅…)n stacks. The fully hydrocarbon archetype of R⋅ does not reveal the aforementioned properties. Thus, the fluorinated 1,3,2-benzodithiazolyls pave a new pathway in the design and synthesis of metal-less magnetically-bistable materials.

Hydrophilic Reduction-Resistant Spin Labels of Pyrrolidine and Pyrroline Series from 3,4-Bis-hydroxymethyl-2,2,5,5-tetraethylpyrrolidine-1-oxyl.

Highly resistant to reduction nitroxides open new opportunities for structural studies of biological macromolecules in their native environment inside living cells and for functional imaging of pH and thiols, enzymatic activity and redox status in living animals. 3,4-Disubstituted nitroxides of 2,2,5,5-tetraethylpyrrolidine and pyrroline series with a functional group for binding to biomolecules and a polar moiety for higher solubility in water and for more rigid attachment via additional coordination to polar sites were designed and synthesized. The EPR spectra, lipophilicities, kinetics of the reduction in ascorbate-containing systems and the decay rates in liver homogenates were measured. The EPR spectra of all 3,4-disubstituted pyrrolidine nitroxides showed additional large splitting on methylene hydrogens of the ethyl groups, while the spectra of similar pyrroline nitroxides were represented with a simple triplet with narrow lines and hyperfine structure of the nitrogen manifolds resolved in oxygen-free conditions. Both pyrrolidine and pyrroline nitroxides demonstrated low rates of reduction with ascorbate, pyrrolidines being a bit more stable than similar pyrrolines. The decay of positively charged nitroxides in the rat liver homogenate was faster than that of neutral and negatively charged radicals, with lipophilicity, rate of reduction with ascorbate and the ring type playing minor role. The EPR spectra of N,N-dimethyl-3,4-bis-(aminomethyl)-2,2,5,5-tetraethylpyrrolidine-1-oxyl showed dependence on pH with pKa = 3, ΔaN = 0.055 mT and ΔaH = 0.075 mT.

1,2,3,4-Tetrafluorobiphenylene: A Prototype Janus-Headed Scaffold for Ambipolar Materials.

The title compound was synthesized by Ullmann cross-coupling in low yield as the first representative of [n]phenylene containing hydrocarbon and fluorocarbon rings. Stille/Suzuki-Miyaura cross-coupling reactions, as well as substitution of fluorine in suitable starting compounds, failed to give the same product. The geometric and electronic structures of the title compound were studied by X-ray diffraction, cyclic voltammetry and density functional theory calculations, together with Hirshfeld surface and reduced density gradient analyses. The crystal structure features head-to-tail π-stacking and other fluorine-related secondary bonding interactions. From the nucleus-independent chemical shifts descriptor, the four-membered ring of the title compound is antiaromatic, and the six-membered rings are aromatic. The Janus molecule is highly polarized; and the six-membered fluoro- and hydrocarbon rings are Lewis π-acidic and π-basic, respectively. The electrochemically-generated radical cation of the title compound is long-lived as characterized by electron paramagnetic resonance, whereas the radical anion is unstable in solution. The title compound reveals electrical properties of an insulator. On expanding its molecular scaffold towards partially fluorinated [n]phenylenes (n≥2), the properties presumably can be transformed into those of semiconductors. In this context, the title compound is suggested as a prototype scaffold for ambipolar materials for organic electronics and spintronics.

Fast and reversible solvent-vapor-induced 1D to 2D transformation in emissive Ag(I)-organic networks.

We report here an unprecedentedly fast and reversible transformation between 1D and 2D MOFs/CPs induced through organic solvent vapours. The transformations occur at room temperature in just 15-20 min, accompanied by a significant change in the observed phosphorescence. These findings provide a new insight into the design of luminescent networks with stimuli-switchable dimensionality.

Rapid, room-temperature self-organization of polyarylated 1H-pyrroles from acetylenes and nitriles in the KOBut/DMSO system.

We have discovered that three molecules of arylacetylene are rapidly (15 min) assembled with one molecule of nitrile at room temperature in the KOBut/DMSO system to afford 2-aryl-3-arylethynyl-4-aryl-5-benzyl-1H-pyrroles in up to 76% yield. We assume that this unprecedented self-organization process involves the cascade addition of acetylenic carbanions, first to the CN, then to the CC and CC bonds of the intermediates, followed by pyrrole ring closure via the intramolecular nucleophilic addition of the NH functional group to the CC bond of the final intermediates.

Substitution of H Atoms in Unsaturated (Vinyl-Type) Carbocations by Cl or O Atoms.

Introduction of Cl and O atoms into C4-vinyl carbocations was studied by X-ray diffraction analysis and IR spectroscopy. Chlorine atoms are weak electron acceptors in ordinary molecules but, within vinyl carbocations, manifest themselves as strong electron donors that accept a positive charge. The attachment of a Cl atom directly to a C=C bond leads to an increase in the e-density on it, exceeding that of the common double bond. The positive charge should be concentrated on the Cl atom, and weak δ- may appear on the C=C bond. More distant attachment of the Cl atom, e.g., to a C atom adjacent to the C=C bond, has a weaker effect on it. If two Cl atoms are attached to the Cγ atom of the vinyl cation, as in Cl2CγCδHCαHCH3, then the cation switches to the allyl type with two practically equivalent and almost uncharged CγCδCα bonds. When such a strong nucleophile as the O atom is introduced into the carbocation, a protonated ester molecule with a C-O(H+)-C group and a C=C bond forms. Nonetheless, in the future, there is still a possibility of obtaining carbocations with a non-protonated C-O-C group.

Strong Magnetically-Responsive Circularly Polarized Phosphorescence and X-Ray Scintillation in Ultrarobust Mn(II)-Organic Helical Chains.

Over recent years, Mn(II)-organic materials showing circularly polarized luminescence (CPL) have attracted great interest because of their eco-friendliness, cheapness, and room temperature phosphorescence. Using the helicity design strategy, herein, chiral Mn(II)-organic helical polymers are constructed featuring long-lived circularly polarized phosphorescence with exceptionally high glum and ΦPL magnitudes of 0.021% and 89%, respectively, while remaining ultrarobust toward humidity, temperature, and X-rays. Equally important, it is disclosed for the first time that the magnetic field has a remarkably high negative effect on CPL for Mn(II) materials, suppressing the CPL signal by 4.2-times at B ⃗ $\vec{B}$  = 1.6 T. Using the designed materials, UV-pumped CPL light-emitting diodes are fabricated, demonstrating enhanced optical selectivity under right- and left-handed polarization conditions. On top of all this, the reported materials display bright triboluminescence and excellent X-ray scintillation activity with a perfectly linear X-ray dose rate response up to 174 µGyair  s-1 . Overall, these observations significantly contribute to the CPL phenomenon for multi-spin compounds and promote the design of highly efficient and stable Mn(II)-based CPL emitters.

A family of CuI-based 1D polymers showing colorful short-lived TADF and phosphorescence induced by photo- and X-ray irradiation.

Exploiting 2-(alkylsulfonyl)pyridines as 1,3-N,S-ligands, herein we have constructed 1D CuI-based coordination polymers (CPs) bearing unprecedented (CuI)n chains and possessing remarkable photophysical properties. At room temperature, these CPs show efficient TADF, phosphorescence or dual emission in the deep-blue to red range with outstandingly short decay times of 0.4-2.0 µs and good quantum performance. Owing to great structural diversity, the CPs demonstrate a variety of emissive mechanisms, spanning from TADF of 1(M + X)LCT type to 3CC and 3(M + X)LCT phosphorescence. Moreover, the designed compounds emit strong X-ray radioluminescence with the quantum efficiency of up to an impressive 55% relative to all-inorganic BGO scintillators. The presented findings push the boundaries in designing TADF and triplet emitters with very short decay times.

TADF and X-ray Radioluminescence of New Cu(I) Halide Complexes: Different Halide Effects on These Processes.

A series of complexes [Cu2X2(Pic3PO)2] (X = Cl, Br, I) based on tris(pyridin-2-ylmethyl)phosphine oxide (Pic3PO) has been synthesized. At 298 K, these compounds exhibit thermally activated delayed fluorescence (TADF) of 1(M+X)LCT type with λmax varying from 485 to 545 nm, and quantum efficiency up to 54%. In the TADF process, the halide effect appears as the emission intensification and bathochromic shift of λmax in the following order X = I < Br < Cl. Upon X-ray irradiation, the title compounds emit radioluminescence, the emission bands of which have the same shape as those at TADF, thereby meaning a similar radiative excited state. By contrast to TADF, the halide effect in the radioluminescence is reversed: its intensity grows in the order X = Cl < Br < I, since heavier atoms absorb X-rays more efficiently. These findings essentially contribute to our knowledge about the halide effect in the photo- and radioluminescent Cu(I) halide emitters.

Interaction of Vinyl-Type Carbocations, C3H5+ and C4H7+ with Molecules of Water, Alcohols, and Acetone.

X-ray diffraction analysis and IR spectroscopy were used to study the products of the interaction of vinyl cations C3H5+ and C4H7+ (Cat+) (as salts of carborane anion CHB11Cl11-) with basic molecules of water, alcohols, and acetone that can crystallize from solutions in dichloromethane and C6HF5. Interaction with water, as content increased, proceeded via three-stages. (1) adduct Cat+·OH2 forms in which H2O binds (through the O atom) to the C=C+ bond of the cation with the same strength as seen in the binding to Na in Na(H2O)6+. (2) H+ is transferred from cation Cat+·OH2 to a water molecule forming H3O+ and alcohol molecules (L) having the CH=CHOH entity. The O- atom of alcohols is attached to the H atom of the C=C+-H moiety of Cat+ thereby forming a very strong asymmetric H-bond, (C=)C+-H⋅⋅⋅O. (3) Finally all vinyl cations are converted into alcohol molecule L and H3O+ cations, yielding proton disolvates L-H+-L with a symmetric very strong H-bond. When an acetone molecule (Ac) interacts with Cat+, H+ is transferred to Ac giving rise to a reactive carbene and proton disolvate Ac-H+-Ac. Thus, the alleged high reactivity of vinyl cations seems to be an exaggeration.

A new subclass of copper(I) hybrid emitters showing TADF with near-unity quantum yields and a strong solvatochromic effect.

We introduce here a new subclass of copper(I) hybrid emitters simultaneously containing [CuxIy]z- anions and Cu+ cations, separated in space by a Janus head ligand. When UV-irradiated at 298 K, these unique "Two-In-One" hybrids exhibit a short-lived green TADF with near-unity quantum yield and a strong solvatochromic effect. Moreover, they manifest a strong radioluminescence upon X-ray irradiation. These findings open up new possibilities for the design of highly performing TADF materials.

Tuning Molecular Electron Affinities against Atomic Electronegativities by Spatial Expansion of a π-System.

2,1,3-Benzochalcogenadiazoles C6 R4 N2 E (E/R; E=S, Se, Te; R=H, F, Cl, Br, I) and C6 H2 R2 N2 E (E/R'; E=S, Se, Te; R=Br, I) are 10π-electron hetarenes. By CV/EPR measurements, DFT calculations, and QTAIM and ELI-D analyses, it is shown that their molecular electron affinities (EAs) increase with decreasing Allen electronegativities and electron affinities of the E and non-hydrogen R (except Cl) atoms. DFT calculations for E/R+e⋅- →[E/R]⋅- electron capture reveal negative ΔG values numerically increasing with increasing atomic numbers of the E and R atoms; positive ΔS has a minor influence. It is suggested that the EA increase is caused by more effective charge/spin delocalization in the radical anions of heavier derivatives due to contributions from diffuse (a real-space expanded) p-AOs of the heavier E and R atoms; and that this counterintuitive effect might be of the general character.

Tris(2-Pyridyl)Arsine as a New Platform for Design of Luminescent Cu(I) and Ag(I) Complexes.

The coordination behavior of tris(2-pyridyl)arsine (Py3As) has been studied for the first time on the example of the reactions with CuI, CuBr and AgClO4. When treated with CuI in CH2Cl2 medium, Py3As unexpectedly affords the scorpionate complex [Cu(Py3As)I]∙CH2Cl2 only, while this reaction in MeCN selectively leads to the dimer [Cu2(Py3As)2I2]. At the same time, the interaction of CuBr with Py3As exclusively gives the dimer [Cu2(Py3As)2Br2]. It is interesting to note that the scorpionate [Cu(Py3As)I]∙CH2Cl2, upon fuming with a MeCN vapor (r.t., 1 h), undergoes quantitative dimerization into the dimer [Cu2(Py3As)2I2]. The reaction of Py3As with AgClO4 produces complex [Ag@Ag4(Py3As)4](CIO4)5 featuring a Ag-centered Ag4 tetrahedral kernel. At ambient temperature, the obtained Cu(I) complexes exhibit an unusually short-lived photoluminescence, which can be tentatively assigned to the thermally activated delayed fluorescence of (M + X) LCT type (M = Cu, L = Py3As; X = halogen). For the title Ag(I) complexes, QTAIM calculations reveal the pronounced argentophilic interactions for all short Ag∙∙∙Ag contacts (3.209-3.313 Å).

IR-Spectroscopic and X-ray-Structural Study of Vinyl-Type Carbocations in Their Carborane Salts.

The butylene carbocation in its salts with anions CHB11F11 - and CHB11Cl11 - forms isomers CH2=C+-CH2-CH3 (I) and CH3-C+=CH-CH3 (II), which were characterized here by infrared (IR) spectroscopy and X-ray diffraction analysis. The strongest influence on the structure of the cations is exerted by geometric ordering of their anionic environment. In the crystalline phase, the cations uniformly interact with neighboring anions, and the C=C bond is located in the middle part of the cations forming a -CH=C+- moiety with the highest positive charge on it and the lowest νC=C frequency, at 1490 cm-1. In the amorphous phase with a disordered anionic environment of the cations, contact ion pairs Anion-···CH2=C+-CH2-CH3 form predominantly, with terminal localization of the C=C bond through which the contact occurs. The positive charge is slightly extinguished by the anion, and the C=C stretch frequency is higher by ∼100 cm-1. The replacement of the hydrogen atom in cations I/II by a Cl atom giving rise to cations CH2=C+-CHCl-CH3 and CH3-C+=CCl-CH3 means that the donation of electron density from the Cl atom quenches the positive charge on the C+=C bond more strongly, and the C=C stretch frequency increases so much that it even exceeds that of neutral alkene analogues by 35-65 cm-1. An explanation is given for the finding that upon stabilization of the vinyl cations by polyatomic substituents such as silylium (SiMe3) and t-Bu groups, the stretching C=C frequency approaches the triple-bond frequency. Namely, the scattering of a positive charge on these substituents enhances their donor properties so much that the electron density on the C=C bond with a weakened charge becomes much higher than that of neutral alkenes.

Trigonal Planar Au@Ag3 Clusters Showing Exceptionally Fast and Efficient Phosphorescence in Violet to Deep-Blue Region.

We report here a series of original ligand-supported trigonal planar Au@Ag3 clusters exhibiting bright solid-state phosphorescence in violet to deep-blue range (λmax =410-442 nm) with remarkably short decay times (0.36-1.36 µs) and up to 96 % emission quantum yield at 298 K.

Controllable Synthesis and Luminescence Behavior of Tetrahedral Au@Cu4 and Au@Ag4 Clusters Supported by tris(2-Pyridyl)phosphine.

We report herein a family of polynuclear complexes, [Au@Ag4(Py3P)4]X5 and [Au@Cu4(Py3P)4]X5 [X = NO3, ClO4, OTf, BF4, SbF6], containing unprecedented Au-centered Ag4 and Cu4 tetrahedral cores supported by tris(2-pyridyl)phosphine (Py3P) ligands. The [Au@Ag4]5+ clusters are synthesized via controlled substitution of the central Ag(I) ion in all-silver [Ag@Ag4]5+ precursors by the reaction with Au(tht)Cl, while the [Au@Cu4]5+ cluster is assembled through the treatment of a pre-organized [Au(Py3P)4]+ metallo-ligand with 4 equiv of a Cu(I) source. The structure of the Au@M4 clusters has been experimentally and theoretically investigated to reveal very weak intermolecular Au-M metallophilic interactions. At ambient temperature, the designed compounds emit a modest turquoise-to-yellow luminescence with microsecond lifetimes. Based on the temperature-dependent photophysical experiments and DFT/TD-DFT computations, the emission observed has been assigned to an MLCT or LLCT type depending on composition of the cluster core.

New Approach toward Dual-Emissive Organic-Inorganic Hybrids by Integrating Mn(II) and Cu(I) Emission Centers in Ionic Crystals.

Inorganic-organic hybrid luminescent materials have received great attention for their potential applications in a wide range of clean/renewable energy-related areas, including photovoltaics and solid-state lighting. Herein, we present a unique and general "Mn + Cu" approach by blending two earth-abundant luminogenic metals, manganese and copper, within a single ionic structure to construct a remarkable family of low-cost and multifunctional hybrid materials featuring dual emission, as well as triboluminescence and second-harmonic generation response. The novel hybrid materials are made of diphosphine dioxide-chelated [Mn(O∧O)3]2+ cations and various anionic [CuxIy](y-x)- clusters, ensuring manifestation of dual phosphorescence streamed from octahedral Mn2+ ions (605-648 nm) and iodocuprate anions (480-728 nm). Noteworthily, the relative ratio of the emission bands, and hence a resulting emission chromaticity, can be tuned in a wide range through modification of cluster [CuxIy](y-x)- modules. The structural diversity, enhanced robustness, and up to 100% luminescence quantum yield make the designed materials promising phosphors for lighting and sensing applications.

Pyridylarsine-based Cu(I) complexes showing TADF mixed with fast phosphorescence: a speeding-up emission rate using arsine ligands.

Can arsine ligands be preferred over similar phosphines to design Cu(I)-based TADF materials? The present study reveals that arsines can indeed be superior to reach shorter decay times of Cu(I) emitters. This has been exemplified on a series of bis(2-pyridyl)phenylarsine-based complexes [Cu2(Py2AsPh)2X2] (X = Cl, Br, and I), the emission decay times of which are significantly shorter (2-9 µs at 300 K) than those of their phosphine analogs [Cu2(Py2PPh)2X2] (5-33 µs). This effect is caused by two factors: (i) large ΔE(S1-T1) gaps of the arsine complexes (1100-1345 cm-1), thereby phosphorescence is admixed with TADF at 300 K, thus reducing the total emission decay time compared to the TADF-only process by 5-28%; (ii) higher SOC strength of arsenic (ζl = 1202 cm-1) against phosphorus (ζl = 230 cm-1) makes the kr(T1 → S0) rate of the Cu(I)-arsine complexes by 1.3 to 4.2 times faster than that of their phosphine analogs. It is also noteworthy that the TADF/phosphorescence ratio for [Cu2(Py2AsPh)2X2] at 300 K is halogen-regulated and varies in the order: Cl (1 : 1) < Br (3 : 1) ≈ I (3.5 : 1). These findings provide a new insight into the future design of dual-mode (TADF + phosphorescence) emissive materials with reduced lifetimes.

Isomers of the Allyl Carbocation C3H5 + in Solid Salts: Infrared Spectra and Structures.

Three isomers of the allyl cation C3H5 + were obtained in salts with the carborane anion CHB11Cl11 -. Two of them, angular CH3-CH=CH+ (I) and linear CH3-C+=CH2 (II), were characterized by X-ray crystallography, and the third one, (CH2CHCH2)+ (III), is formed in an amorphous salt. The stretch vibration of the charged double bond C=C+ of I and II is decreased by 162 cm-1 (I) or 76 cm-1 (II) as compared to that of neutral propene. This result contradicts the prediction of DFT and MP2 calculations with the 6-311G++(d,p) basis set that the appearance of the positive charge on the C=C bond should increase its stretch vibration by 200 cm-1 (I) or 210 cm-1 (II). According to infrared spectra, the CC bonds in isomer III have one-and-a-half bond status. Isomers I and II in the crystal lattice are stabilized due to uniform ionic interactions with neighboring anions with partial transfer of a positive charge to them. Additional stabilization of II is provided by a weak hyperconjugation effect. Isomer III is stabilized in the amorphous phase due to ion paring with a counterion and a strong intramolecular hyperconjugation effect.