Anchoring Carbon Spheres on Titanium Dioxide Modified Commercial Polyethylene (PE) Separator to Suppress Lithium Dendrites for Lithium Metal Batteries.

Lithium dendrites are easily generated for excessively-solved lithium ions (Li+ ) inside the lithium metal batteries, which will lead serious safety issues. In this experiment, carbon spheres (CS) are successfully anchored on TiO2  (CS@TiO2 ) in the hydrothermal polymerization, which is filtrated on the commercial PE separator (CS@TiO2 @PE). The negative charge in CS can suppress random diffusion of anions through electrostatic interactions. Density functional theory (DFT) calculations show that CS contributes to the desolvation of Li+ , thereby increasing the migration rate of Li+ . Furthermore, TiO2  exhibits high affinity to liquid electrolytes and acts as a physical barrier to lithium dendrite formation. CS@TiO2 is a combination of the advantages of CS and TiO2 . As results, the Li+  transference number of the CS@TiO2 @PE separator can be promoted to 0.63. The Li||Li cell with the CS@TiO2 @PE separator exhibits a stable cycle performance for more than 600 h and lower polarization voltage (17 mV) at 1 mA cm-2 . The coulombic efficiency (CE) of the Li||Cu cells employe the CS@TiO2 @PE separator is 81.63% over 130 cycles. The discharge capacity of LiFePO4 ||Li cells based on the CS@TiO2 @PE separator is 1.73 mAh (capacity retention = 91.53% after 260 cycles). Thus, the CS@TiO2 layer inhibits lithium dendrite formation.

Improvement of the mechanical and shape memory properties in polylactide/polyethylene glycol blends by reactive graphene oxide.

The widespread application of biodegradable polylactide (PLA) is hindered by its brittleness. Polyethylene glycol (PEG) is commonly utilized as a plasticizer because of its favorable compatibility with PLA. However, the incorporation of PEG considerably diminishes the tensile strength of PLA. To address this issue, reactive isocyanate-modified graphene oxide (mGO) was synthesized and used as an enhancer in PLA/PEG blends. By virtue of the reaction between the isocyanate group in mGO and the terminal hydroxyl groups of PLA and PEG, graphene-based polyurethane (PU) in-situ formed and enhanced the interface between GO and the matrix. Consequently, the PLA/PEG/mGO composites exhibit simultaneously improved tensile and impact strengths, achieving an increase of 20.6% and 29.4%, respectively, compared to PLA/PEG blends. Moreover, the in situ formed PU reduces the relaxation time of the molecule motion and improved the entanglement density, thereby improving the shape-memory recovery rate and final recovery degree of the composites. This work provides a facile method to simultaneously improve the dispersion of GO and enhance its interface with polymer, thereby supplying well comprehensive properties of PLA and extending the applications of biodegradable polymers.

High-stability core-shell structured PAN/PVDF nanofiber separator with excellent lithium-ion transport property for lithium-based battery.

The ion transport channel constructed by the separator is crucial for the practical performance of Li-ion batteries, including cycling stability and high rate capability under high current. Traditional polyolefin separator is the storage of electrolyte, which guarantees the internal ion transport process. However, its weak interaction with electrolyte and low cationic transport capacity limit the application of lithium ion battery in large current. In this study, a kind of core-shell structured polyacrylonitrile (PAN)/polyvinylidene fluoride (PVDF) nanofiber separator composed of PAN core and PVDF shell was prepared by coaxial electrospinning technique. As a result, the mechanical strength of PAN/PVDF nanofiber separator is increased from 0.6 MPa of PVDF to 3.6 MPa for PAN core. Furthermore, PAN/PVDF nanofiber separator exhibits an improved lithium-ion transference number (0.66), which is resulted from F functional groups of PVDF shell. It is believed that the interactions between the lithium ion and F functional group could construct a fast ion transport channel. The LiCoO2/Li half-cells assembled with PAN/PVDF exhibited higher discharge capacity (5C) than those cells using pristine PVDF, PAN separators and polyethylene (PE) separator. It is worth mentioning that the cells with PAN/PVDF separator also have excellent cycle stability. This study provides a new idea about separator-design strategy for high-performance lithium-based battery.