Social capital I: measurement and associations with economic mobility.

Social capital-the strength of an individual's social network and community-has been identified as a potential determinant of outcomes ranging from education to health1-8. However, efforts to understand what types of social capital matter for these outcomes have been hindered by a lack of social network data. Here, in the first of a pair of papers9, we use data on 21 billion friendships from Facebook to study social capital. We measure and analyse three types of social capital by ZIP (postal) code in the United States: (1) connectedness between different types of people, such as those with low versus high socioeconomic status (SES); (2) social cohesion, such as the extent of cliques in friendship networks; and (3) civic engagement, such as rates of volunteering. These measures vary substantially across areas, but are not highly correlated with each other. We demonstrate the importance of distinguishing these forms of social capital by analysing their associations with economic mobility across areas. The share of high-SES friends among individuals with low SES-which we term economic connectedness-is among the strongest predictors of upward income mobility identified to date10,11. Other social capital measures are not strongly associated with economic mobility. If children with low-SES parents were to grow up in counties with economic connectedness comparable to that of the average child with high-SES parents, their incomes in adulthood would increase by 20% on average. Differences in economic connectedness can explain well-known relationships between upward income mobility and racial segregation, poverty rates, and inequality12-14. To support further research and policy interventions, we publicly release privacy-protected statistics on social capital by ZIP code at https://www.socialcapital.org .

Social capital II: determinants of economic connectedness.

Low levels of social interaction across class lines have generated widespread concern1-4 and are associated with worse outcomes, such as lower rates of upward income mobility4-7. Here we analyse the determinants of cross-class interaction using data from Facebook, building on the analysis in our companion paper7. We show that about half of the social disconnection across socioeconomic lines-measured as the difference in the share of high-socioeconomic status (SES) friends between people with low and high SES-is explained by differences in exposure to people with high SES in groups such as schools and religious organizations. The other half is explained by friending bias-the tendency for people with low SES to befriend people with high SES at lower rates even conditional on exposure. Friending bias is shaped by the structure of the groups in which people interact. For example, friending bias is higher in larger and more diverse groups and lower in religious organizations than in schools and workplaces. Distinguishing exposure from friending bias is helpful for identifying interventions to increase cross-SES friendships (economic connectedness). Using fluctuations in the share of students with high SES across high school cohorts, we show that increases in high-SES exposure lead low-SES people to form more friendships with high-SES people in schools that exhibit low levels of friending bias. Thus, socioeconomic integration can increase economic connectedness in communities in which friending bias is low. By contrast, when friending bias is high, increasing cross-SES interactions among existing members may be necessary to increase economic connectedness. To support such efforts, we release privacy-protected statistics on economic connectedness, exposure and friending bias for each ZIP (postal) code, high school and college in the United States at https://www.socialcapital.org .

Evaporative membrane modulation for comprehensive two-dimensional liquid chromatography.

An evaporative membrane modulator was developed, built and evaluated to avoid loss of performance in the second dimension when coupling two-dimensional liquid chromatography systems. The automated interface reduces the volume after 1D elution on-line by a pre-determined factor, regardless of the separation gradient. This volume reduction ensures that the injection volume in the 2D is appropriate for the second column, avoiding the detrimental effects of overloading. In addition, the fraction solvent composition is constant over the length of the separation increasing reproducibility of 2D separations. The evaporative membrane modulator was demonstrated with a 10-fold reduction, reducing the injection volume from 50 to 5 µL. A consequence of the EMM device is a reduction in the capacity of the first dimension, which is decreased by a factor of 2.4, but the peak width at half maximum was reduced by up to 22% in the second dimension. When band broadening is considered, the corrected peak capacity with the modulator was only 10% lower than that without the modulator, but with a gain in peak height of 2-3, and a decrease in retention time between subsequent peak-slices reduced from 4s to be negligible. This improves peak shape and shows potential to facilitate peak identification and quantification in more complex applications.

Accelerating Harmonization in Digital Health.

Digital tools play an important role in supporting front-line health workers who deliver primary care. This paper explores the current state of efforts undertaken to move away from single-purpose applications of digital health towards integrated systems and solutions that align with national strategies. Through examples from health information systems, data and health worker training, this paper demonstrates how governments and stakeholders are working to integrate digital health services. We emphasize three factors as crucial for this integration: development and implementation of national digital health strategies; technical interoperability and collaborative approaches to ensure that digital health has an impact on the primary care level. Consolidation of technologies will enable an integrated, scaleable approach to the use of digital health to support health workers. PURPOSE: As this edition explores a paradigm shift towards harmonization in primary healthcare systems, this paper explores complementary efforts undertaken to move away from single-purpose applications of digital health towards integrated systems and solutions that align with national strategies. It describes a paradigm shift towards integrated and interoperable systems that respond to health workers' needs in training, data and health information; and calls for the consolidation and integration of digital health tools and approaches across health areas, functions and levels of the health system. It then considers the critical factors that must be in place to support this paradigm shift. This paper aims not only to describe steps taken to move from fractured pilots to effective systems, but to propose a new perspective focused on consolidation and collaboration guided by national digital health strategies.

The Effectiveness of a 3D Computerized Tutorial to Enhance Learning of the Canine Larynx and Hyoid Apparatus.

Teaching the anatomy of the canine larynx and hyoid apparatus is challenging because dissection disassembles and/or damages these structures, making it difficult to understand their three-dimensional (3D) anatomy and spatial interrelationships. This study assessed the effectiveness of an interactive, computerized 3D tutorial for teaching the anatomy of the canine larynx and hyoid apparatus using a randomized control design with students enrolled in the first-year professional program at Oregon State University College of Veterinary Medicine. All first-year students from 2 consecutive years were eligible. All students received the traditional methods of didactic teaching and dissection to learn the anatomy of the canine larynx and hyoid apparatus, after which they were divided into two statistically equal groups based on their cumulative anatomy test scores from the prior term. The tutorial group received an interactive, computerized tutorial developed by the investigators containing 3D images of the canine larynx and hyoid apparatus, while the control group received the same 3D images without the computerized tutorial. Both groups received the same post-learning assessment and survey. Sixty-three first-year students participated in the study, 28 in the tutorial group, and 35 in the control group. Post-learning assessment and survey scores were both significantly higher among students in the computerized tutorial group than those in the control group. This study demonstrates that a 3D computerized tutorial is more effective in teaching the anatomy of the canine hyoid apparatus and larynx than 3D images without a tutorial. Students likewise rated their learning experience higher when using the 3D computerized tutorial.

Interacting with Large 3D Datasets on a Mobile Device.

A detail-on-demand scheme can alleviate both memory and GPU pressure on mobile devices caused by volume rendering. This approach allows a user to explore an entire dataset at its native resolution while simultaneously constraining the texture size being rendered to a dimension that does not exceed the processing capabilities of a portable device. This scheme produces higher-quality, more focused images rendered at interactive frame rates, while preserving the native resolution of the dataset.

A summer blender camp: modeling, rendering, and animation for high school students.

At Camp Blender, high-school students of varying backgrounds learned how to use the Blender software package to create computer graphics content. In a postclass survey, most of them indicated that the camp affected how they thought about their career path.

Using GPU shaders for visualization, part 3.

GPU shaders aren't just for glossy special effects. Parts 1 and 2 of this discussion looked at using them for point clouds, cutting planes, line integral convolution, and terrain bump-mapping. Part 3 covers compute shaders and shader storage buffer objects-two features announced as part of OpenGL 4.3.

A high-throughput structural biology/proteomics beamline at the SRS on a new multipole wiggler.

The North West Structural Genomics Centre's beamline, MAD10, at the SRS receives the central part of the radiation fan (0.5 mrad vertically, 4 mrad horizontally) produced by a new 2.46 T ten-pole wiggler. The optical arrangement of the beamline consists of a Rh-coated collimating Si mirror, a fixed-exit-beam double-crystal monochromator with sagittal bending for horizontal focusing and a second Rh-coated Si mirror for vertical focusing. The double-crystal Si (111) monochromator allows data collection in the 5-13.5 keV photon energy range with rapid (subsecond) tunability and high energy resolution. The monochromatic beam is optimized through a 200 microm collimator. The beamline end station has been designed around a Mar desktop beamline with high-throughput cryogenic sample changer, Mar225 CCD detector, liquid-N(2) autofill system and an ORTEC C-TRAIN-04 energy-resolving high-count-rate X-ray fluorescence detector. The instrument is optimized for MAD/SAD applications in protein crystallography with the additional mode of operation of online single-crystal EXAFS studies on the same crystals. Thus, screening of metals/Se in the crystal can be performed quickly prior to MAD/SAD data collection by exciting the crystal with X-rays of appropriate energy and recording an energy-dispersive fluorescence spectrum. In addition, this experimental set-up allows for parallel XAFS measurements on the same crystal to monitor 'radiation-induced' changes, if any, in e.g. the redox state of metal centres to be detected for a 'metallic' functional group during crystallographic data collection. Moreover, careful minimization of the thickness of the Be window maximizes the intensity performance for the 2.0-2.5 A softer wavelength range. This range also covers the K-edges of a number of important 3d transition metals as well as the L-edges of xenon and iodine and enhanced sulfur f ''.

Manipulation of volume data to manufacture vascular replicas.

There are three reasons to create physical replicas of human anatomy: (1) to be able to better visualize the shape of a single organ, or a section of anatomy; (2) to be able to visualize the spatial relationships in three-dimensions; and (3) to use accurate replicas to practice or rehearse otherwise high-risk clinical procedures in the laboratory. This paper describes a project to fabricate a carotid artery. It discusses the gathering of data, the conversion to a volume, and the subsequent conversion to a manufacturable form.

The content of ecstasy tablets: implications for the study of their long-term effects.

AIMS: To examine the variation in the content of ecstasy tablets seized in the north-west of England during 2001 and to compare it to the UK average from 1991 to 2001. MEASUREMENTS: All tablets submitted to the Forensic Science Service in the north-west of England during 2001 were analysed by high performance liquid chromatography with diode array detection (HPLC-DAD). The mean MDMA content of these tablets are reported and compared to results from all Forensic Science Service laboratories in the United Kingdom from 1991 to 2001. Multiple samples (n= 80) from a single large seizure of White Dove tablets were analysed to determine the variation due to manufacturing. FINDINGS: All tablets submitted from the north-west of England to the Forensic Science Service in 2001 were found to contain 3,4-methylenedioxymethamphetamine (MDMA) and some also contained 3,4-methylenedioxyethamphetamine (MDEA). The MDMA content of these tablets ranged from 20 to 109 mg and the mean was in the 60-69 mg range. Mitsubishi tablets were the most common type and they were found across the whole range. The low variation of MDMA content in the White Dove tablets suggests that these tablets were well manufactured. The data from the north-west of England in 2001 are in agreement with tablet analyses over the past 10 years which show that the average MDMA content is falling. CONCLUSIONS: The amount of MDMA in ecstasy tablets is axiomatic to the discussion of their long-term effects. In order for the observed differences in ecstasy users to be the result of MDMA-induced neurotoxicity it is necessary for them to have ingested one or more neurotoxic doses. These data indicate that the amount of MDMA in ecstasy tablets is dropping and that dose-effect relationships need to take this into account.