ABSTRACT
Background: The current behind armor blunt trauma (BABT) injury criterion uses a single penetration limit of 44 mm in Roma Plastilina clay and is not specific to thoracoabdominal regions. However, different regions in the human body have different injury tolerances. This manuscript presents a matched-pair hybrid test paradigm with different experimental models and candidate metrics to develop regional human injury criteria. Methods: Live and cadaver swine were used as matched pair experimental models. An impactor simulating backface deformation profiles produced by body armor from military-relevant ballistics was used to deliver BABT loading to liver and lung regions in cadaver and live swine. Impact loading was characterized using peak accelerations and energy. For live swine, physiological parameters were monitored for 6 hours, animals were euthanized, and a detailed necropsy was done to identify injuries to skeletal structures, organs and soft tissues. A similar process was used to identify injuries to the cadaver swine for targeted thoracoabdominal regions. Results: Two cadavers and one live swine were subjected to BABT impacts to the liver. One cadaver and one live swine were subjected to BABT impacts to the left lung. Injuries to both regions were similar at similar energies between the cadaver and live models. Conclusions: Swine is an established animal for thoracoabdominal impact studies in automotive standards, although at lower insult levels. Similarities in BABT responses between cadaver and live swine allow for extending testing protocols to human cadavers and for the development of scaling relationships between animal and human cadavers, acting as a hybrid protocol between species and live and cadaver models. Injury tolerances and injury risk curves from live animals can be converted to human tolerances via structural scaling using these outcomes. The present experimental paradigm can be used to develop region-based BABT injury criteria, which are not currently available.
ABSTRACT
Advancements in automated vehicles may position the occupant in postures different from the current standard posture. It may affect human tolerance responses. The objective of this study was to determine the lateral bending tolerance of the head-cervical spine with initial head rotation posture using loads at the occipital condyles and lower neck and describe injuries. Using a custom loading device, head-cervical spine complexes from human cadavers were prepared with load cells at the ends. Lateral bending loads were applied to prerotated specimens at 1.5 m/s. At the occipital condyles, peak axial and antero-posterior and medial-lateral shear forces were: 316-954 N, 176-254 N, and 327-508 N, and coronal, sagittal, and axial moments were: 27-38 N·m, 21-38 N·m, and 9.7-19.8 N·m, respectively. At the lower neck, peak axial and shear forces were: 677-1004 N, 115-227 N, and 178-350 N, and coronal, sagittal, and axial moments were: 30-39 N·m, 7.6-21.3 N·m, and 5.7-13.4 N·m, respectively. Ipsilateral atlas lateral mass fractures occurred in four out of five specimens with varying joint diastasis and capsular ligament involvements. Acknowledging that the study used a small sample size, initial tolerances at the occipital condyles and lower neck were estimated using survival analysis. Injury patterns with posture variations are discussed.