ABSTRACT
Background: Image artifacts caused by metal knee implants in 1.5T and 3T magnetic resonance imaging (MRI) systems complicate imaging-based diagnosis of the peri-implant region after total knee arthroplasty. Alternatively, metal-free knee prostheses could effectively minimize MRI safety hazards and offer the potential for higher quality diagnostic images. Methods: A novel knee arthroplasty device composed of BIOLOX delta, an alumina matrix composite (AMC) ceramic, was tested in a magnetic resonance (MR) environment. American Society for Testing and Materials test methods were used for evaluating magnetically induced displacement force, magnetically induced torque, radiofrequency-induced heating, and MR image artifact. Results: Magnetically induced displacement force and magnetically induced torque results of the AMC ceramic knee indicated that these effects do not pose a known risk in a clinical MR environment, as assessed in a 3T magnetic field. Moreover, minimal radiofrequency-induced heating of the device was observed. In addition, the AMC ceramic knee demonstrated minimal MR image artifacts (7 mm) in comparison to a cobalt-chromium knee (88 mm). The extremely low magnetic susceptibility of AMC (2 ppm) underlines that it is a nonmetallic and nonmagnetic material well suited for the manufacturing of MR Safe orthopaedic implants. Conclusions: The AMC ceramic knee is a novel metal-free total knee arthroplasty device that can be regarded as MR Safe, as suggested by the absence of hazards from the exposure of this implant to a MR environment. The AMC ceramic knee presents the advantage of being scanned with superior imaging results in 3T MRI systems compared to alternative metal implants on the market.
ABSTRACT
The purpose of this study was to examine the impact attenuation properties of women's lacrosse headgear and to characterize mechanical properties of the materials of which they are composed. Impacts using a linear impactor (2.2, 2.9, and 5.0 m/s) and a projectile shooter (13.4 and 27.0 m/s) were applied to a Hybrid III 50th male head-neck assembly at six impact locations to replicate realistic women's lacrosse head impacts. Individual materials that make up the headgear were tested in compression at two quasi-static strain rates, 0.01/s and1/s, and 100/s using uniaxial test machines. For the linear impactor tests, results showed a significant decrease in peak linear and rotational acceleration (PLA and PRA), peak rotational velocity (PRV), head injury criteria and brain injury criteria in the helmeted impacts (p < 0.022). During the ball impacts PRV and PRA were significantly lower for both helmeted conditions compared with no helmet (p < 0.01). Material characterization tests indicated a range of rate effects in these materials ranging from weak to pronounced, and these effects correspondingly influenced the strain energy density graphs. The connection of the materials' rate effects to the performance of the headgear is described in general and in relation to the impact tests.