A recipe for plastic: Expert insights on plastic additives in the marine environment.

The production and consumption of plastic products had been steadily increasing over the years, leading to more plastic waste entering the environment. Plastic pollution is ubiquitous and comes in many types and forms. To enhance or modify their properties, chemical additives are added to plastic items during manufacturing. The presence and leakage of these additives, from managed and mismanaged plastic waste, into the environment are of growing concern. In this study, we gauged, via an online questionnaire, expert knowledge on the use, characteristics, monitoring and risks of plastic additives to the marine environment. We analysed the survey results against actual data to identify and prioritise risks and gaps. Participants also highlighted key factors for future consideration, including gaining a deeper understanding of the use and types of plastic additives, how they leach throughout the entire lifecycle, their toxicity, and the safety of alternative options. More extensive chemical regulation and an evaluation of the essentiality of their use should also be considered.

Uptake of microplastics by marine worms depends on feeding mode and particle shape but not exposure time.

The uptake of microplastics into marine species has been widely documented across trophic levels. Feeding mode is suggested as playing an important role in determining different contamination loads across species, but this theory is poorly supported with empirical evidence. Here we use the two distinct feeding modes of the benthic polychaete, Hediste diversicolor (The Harbour Ragworm) (O.F. Müller, 1776), to test the hypothesis that filter feeding will lead to a greater uptake of microplastic particles than deposit feeding. Worms were exposed to both polyamide microfragments and microfibres in either water (as filter feeders) or sediment (as deposit feeders) for 1 week. No effect of exposure time was found between 1 day and 1 week (p > 0.19) but feeding mode was found to significantly affect the number of microfibres recovered from each worm (p < 0.001). When exposed to microfibers, filter feeding worms took up ≈15,000 % more fibres than deposit feeding worms (p < 0.001), whereas when feeding on microfragments there was no difference between feeding modes. Our data demonstrate that both feeding mode and particle characteristics significantly influence the uptake of microplastics by H. diversicolor. Using imaging flow cytometry, filter feeders were found to take up a broader size range of particles, with significantly more smaller and larger particles than deposit feeders (p < 0.05), commensurate with the range of plastics isolated from the guts of ragworms recovered from the environment. These results demonstrate that biological traits are useful in understanding the uptake of plastics into marine worms and warrant further exploration as a tool for understanding the bioaccessibility of plastics to marine organisms.

Meso- and microplastics monitoring in harbour environments: A case study for the Port of Durban, South Africa.

An investigation into the abundance and distribution of meso- and microplastics within the Port of Durban was conducted using a static immersible water pump and particle filtration system to collect meso- and microplastics from the water column, microplastics from sediment samples and corresponding CTD. Microplastics were detected in all samples under investigation. Results suggest that sewage overflow, stormwater drains, port operations, followed by rivers are input areas for mitigation to focus on. Identifying meso- and microplastics inputs, baselines and distribution allow for long term monitoring and management in a harbour environment. This can potentially contribute to the control and regulation of small plastics particles in harbours, and the subsequent transport of these pollutants via dredged material into other ecosystems.

Occurrence and abundance of meso and microplastics in sediment, surface waters, and marine biota from the South Pacific region.

Data on the occurrence and abundance of meso and microplastics for the South Pacific are limited and there is urgent need to fill this knowledge gap. The main aim of the study was to apply a rapid screening method, based on the fluorescence tagging of polymers using Nile red, to determine the concentration of meso and microplastics in biota, sediment and surface waters near the capital cities of Vanuatu and Solomon Islands. A spatial investigation was carried out for sediment, biota and water as well as a temporal assessment for sediment for two consecutive years (2017 and 2018). Accumulation zones for microplastics were identified supported by previous hydrodynamic models. Microplastics were detected for all environmental compartments investigated indicating their widespread presence for Vanuatu and Solomons Islands. This method was in alignment with previous recommendations that the Nile red method is a promising approach for the largescale mapping of microplastics in a monitoring context.

Using high-frequency phosphorus monitoring for water quality management: a case study of the upper River Itchen, UK.

Increased concentrations of phosphorus (P) in riverine systems lead to eutrophication and can contribute to other environmental effects. Chalk rivers are known to be particularly sensitive to elevated P levels. We used high-frequency (daily) automatic water sampling at five distinct locations in the upper River Itchen (Hampshire, UK) between May 2016 and June 2017 to identify the main P species (including filterable reactive phosphorus, total filterable phosphorus, total phosphorus and total particulate phosphorus) present and how these varied temporally. Our filterable reactive phosphorus (considered the biologically available fraction) data were compared with the available Environment Agency total reactive phosphorus (TRP) values over the same sampling period. Over the trial, the profiles of the P fractions were complex; the major fraction was total particulate phosphorus with the mean percentage value ranging between 69 and 82% of the total P present. Sources were likely to be attributable to wash off from agricultural activities. At all sites, the FRP and Environment Agency TRP mean concentrations over the study were comparable. However, there were a number of extended time periods (1 to 2 weeks) where the mean FRP concentration (e.g. 0.62 mg L-1) exceeded the existing regulatory values (giving a poor ecological status) for this type of river. Often, these exceedances were missed by the limited regulatory monitoring procedures undertaken by the Environment Agency. There is evidence that these spikes of elevated concentrations of P may have a biological impact on benthic invertebrate (e.g. blue-winged olive mayfly) communities that exist in these ecologically sensitive chalk streams. Further research is required to assess the ecological impact of P and how this might have implications for the development of future environmental regulations.

Measuring metaldehyde in surface waters in the UK using two monitoring approaches.

Metaldehyde is a molluscicide and the active ingredient in formulated slug pellets used for the protection of crops. Due to its mobility in the environment it is frequently found in river catchments, often at concentrations exceeding the EU Drinking Water Directive limit of 100 ng L-1 for a single pesticide. This presents a major problem for water companies in the UK where such waters are abstracted for production of potable drinking water supplies. Therefore, it is important to understand the sources, transport and fate of this emerging pollutant of concern in the aquatic environment. We monitored metaldehyde in two contrasting river catchments (River Dee (8 sites) and River Thames (6 sites)) over a twelve month period that coincided with the agricultural application period of the molluscicide. Spot samples of water were collected typically weekly or fortnightly. Chemcatcher® passive samplers were deployed consecutively every two weeks. At the River Dee, there was little variability in the concentrations of metaldehyde (<10-110 ng L-1) measured in the spot samples of water. The Chemcatcher® gave similar time-weighted average concentrations which were higher following increased rain fall events. At the River Thames, concentrations of metaldehyde varied more widely (<9-4200 ng L-1) with several samples exceeding 100 ng L-1. Generally these concentrations were reflected in the time-weighted average concentrations obtained using the Chemcatcher®. Both monitoring techniques gave complementary data for identifying input sources, and in the development of catchment management plans and environmental remediation strategies.

Impact of Environmental Radiation on the Health and Reproductive Status of Fish from Chernobyl.

Aquatic organisms at Chernobyl have now been chronically exposed to environmental radiation for three decades. The biological effects of acute exposure to radiation are relatively well documented, but much less is known about the long-term effects of chronic exposure of organisms in their natural environment. Highly exposed fish in freshwater systems at Chernobyl showed morphological changes in their reproductive system in the years after the accident. However, the relatively limited scope of past studies did not allow robust conclusions to be drawn. Moreover, the level of the radiation dose at which significant effects on wildlife occur is still under debate. In the most comprehensive evaluation of the effects of chronic radiation on wild fish populations to date, the present study measures specific activities of 137Cs, 90Sr, and transuranium elements (238Pu, 239,240Pu, and 241Am), index conditions, distribution and size of oocytes, as well as environmental and biological confounding factors in two fish species perch ( Perca fluviatilis) and roach ( Rutilus rutilus) from seven lakes. In addition, relative species abundance was examined. The results showed that both fish species are, perhaps surprisingly, in good general physiological and reproductive health. Perch, however, appeared to be more sensitive to radiation than roach: in the most contaminated lakes, a delay of the maturation of the gonads and the presence of several undeveloped phenotypes were evident only for perch and not for roach.

Calibration and field evaluation of the Chemcatcher® passive sampler for monitoring metaldehyde in surface water.

Metaldehyde is a potent molluscicide. It is the active ingredient in most slug pellets used for crop protection. This polar compound is considered an emerging pollutant. Due to its environmental mobility, metaldehyde is frequently detected at impacted riverine sites, often at concentrations above the EU Drinking Water Directive limit of 0.1µgL-1 for an individual pesticide. This presents a problem when such waters are abstracted for use in the production of potable water supplies, as this chemical is difficult to remove using conventional treatment processes. Understanding the sources, transport and fate of this pollutant in river catchments is therefore important. We developed a new variant of the Chemcatcher® passive sampler for monitoring metaldehyde comprising a Horizon Atlantic™ HLB-L disk as the receiving phase overlaid with a polyethersulphone membrane. The sampler uptake rate (Rs) was measured in semi-static laboratory (Rs = 15.7mLday-1) and in-field (Rs = 17.8mLday-1) calibration experiments. Uptake of metaldehyde was linear over a two-week period, with no measurable lag phase. Field trials (five consecutive 14day periods) using the Chemcatcher® were undertaken in eastern England at three riverine sites (4th September-12th November 2015) known to be impacted by the seasonal agricultural use of metaldehyde. Spot samples of water were collected regularly during the deployments, with concentrations of metaldehyde varying widely (~ 0.03-2.90µgL-1) and often exceeding the regulatory limit. Time weighted average concentrations obtained using the Chemcatcher® increased over the duration of the trial corresponding to increasing stochastic inputs of metaldehyde into the catchment. Monitoring data obtained from these devices gives complementary information to that obtained by the use of infrequent spot sampling procedures. This information can be used to develop risk assessments and catchment management plans and to assess the effectiveness of any mitigation and remediation strategies.

Assessment of microplastic-sorbed contaminant bioavailability through analysis of biomarker gene expression in larval zebrafish.

Microplastics (MPs) are prevalent in marine ecosystems. Because toxicants (termed here "co-contaminants") can sorb to MPs, there is potential for MPs to alter co-contaminant bioavailability. Our objective was to demonstrate sorption of two co-contaminants with different physicochemistries [phenanthrene (Phe), log10Kow=4.57; and 17α-ethinylestradiol (EE2), log10Kow=3.67] to MPs; and assess whether co-contaminant bioavailability was increased after MP settlement. Bioavailability was indicated by gene expression in larval zebrafish. Both Phe and EE2 sorbed to MPs, which reduced bioavailability by a maximum of 33% and 48% respectively. Sorption occurred, but was not consistent with predictions based on co-contaminant physicochemistry (Phe having higher log10Kow was expected to have higher sorption). Contaminated MPs settled to the bottom of the exposures did not lead to increased bioavailability of Phe or EE2. Phe was 48% more bioavailable than predicted by a linear sorption model, organism-based measurements therefore contribute unique insight into MP co-contaminant bioavailability.

Relative importance of microplastics as a pathway for the transfer of hydrophobic organic chemicals to marine life.

It has been hypothesised that, if ingested, plastic debris could act as vector for the transfer of chemical contaminants from seawater to organisms, yet modelling suggest that, in the natural environment, chemical transfer would be negligible compared to other routes of uptake. However, to date, the models have not incorporated consideration of the role of gut surfactants, or the influence of pH or temperature on desorption, whilst experimental work has shown that these factors can enhance desorption of sorbed contaminants several fold. Here, we modelled the transfer of sorbed organic contaminants dichlorodiphenyltrichloroethane (DDT), phenanthrene (Phe) and bis-2-ethylhexyl phthalate (DEHP) from microscopic particles of polyvinylchloride (PVC) and polyethylene (PE) to a benthic invertebrate, a fish and a seabird using a one-compartment model OMEGA (Optimal Modelling for EcotoxicoloGical Applications) with different conditions of pH, temperature and gut surfactants. Environmental concentrations of contaminants at the bottom and the top of published ranges were considered, in combination with ingestion of either 1 or 5% by weight of plastic. For all organisms, the combined intake from food and water was the main route of exposure for Phe, DEHP and DDT with a negligible input from plastic. For the benthic invertebrate, predictions including the presence of contaminated plastic resulted in very small increases in the internal concentrations of DDT and DEHP, while the net change in the transfer of Phe was negligible. While there may be scenarios in which the presence of plastic makes a more important contribution, our modelling study suggests that ingestion of microplastic does not provide a quantitatively important additional pathway for the transfer of adsorbed chemicals from seawater to biota via the gut.

A simple, low cost GC/MS method for the sub-nanogram per litre measurement of organotins in coastal water.

Tributyltin (TBT) is a legacy pollutant in the aquatic environment, predominantly from its use in anti-foulant paints and is listed as a priority hazardous substance in the European Union's Water Framework Directive (WFD). Measuring low concentrations of TBT and other organotins (e.g. monobutyltin (MBT), dibutyltin (DBT), diphenyltin (DPhT) and triphenyltin (TPhT)) at sub ng/L concentrations in coastal waters using standard laboratory instrumentation is very challenging. Conventional, low injection volume gas chromatography/mass spectrometry (GC/MS) combined with liquid-liquid extraction typically achieves limits of detection for TBT ∼10 ng L(-1). We describe a simple, programmed temperature vaporisation-large injection volume (50 µL), GC/MS selected ion monitoring method for measuring DBT, TBT, DPhT and TPhT in coastal waters at lower concentrations. Quantification of MBT was not possible using these injection volumes but was achieved using a 10 µL injection volume together with a reduced injection speed. This new approach offers: •When using a 50 µL injection, limits of detection = 0.70 ng L(-1) and limits of quantification = 2.1 ng L(-1) for TBT were achieved in derivatised standards.•Recoveries of TBT and TPhT from coastal water >97%.•Time consuming, off-line sample pre-concentration methods are unnecessary.

Microplastic as a Vector for Chemicals in the Aquatic Environment: Critical Review and Model-Supported Reinterpretation of Empirical Studies.

The hypothesis that 'microplastic will transfer hazardous hydrophobic organic chemicals (HOC) to marine animals' has been central to the perceived hazard and risk of plastic in the marine environment. The hypothesis is often cited and has gained momentum, turning it into paradigm status. We provide a critical evaluation of the scientific literature regarding this hypothesis. Using new calculations based on published studies, we explain the sometimes contrasting views and unify them in one interpretive framework. One explanation for the contrasting views among studies is that they test different hypotheses. When reframed in the context of the above hypothesis, the available data become consistent. We show that HOC microplastic-water partitioning can be assumed to be at equilibrium for most microplastic residing in the oceans. We calculate the fraction of total HOC sorbed by plastics to be small compared to that sorbed by other media in the ocean. We further demonstrate consistency among (a) measured HOC transfer from microplastic to organisms in the laboratory, (b) measured HOC desorption rates for polymers in artificial gut fluids (c) simulations by plastic-inclusive bioaccumulation models and (d) HOC desorption rates for polymers inferred from first principles. We conclude that overall the flux of HOCs bioaccumulated from natural prey overwhelms the flux from ingested microplastic for most habitats, which implies that microplastic ingestion is not likely to increase the exposure to and thus risks of HOCs in the marine environment.

Characterisation, quantity and sorptive properties of microplastics extracted from cosmetics.

Cosmetic products, such as facial scrubs, have been identified as potentially important primary sources of microplastics to the marine environment. This study characterises, quantifies and then investigates the sorptive properties of plastic microbeads that are used as exfoliants in cosmetics. Polyethylene microbeads were extracted from several products, and shown to have a wide size range (mean diameters between 164 and 327 µm). We estimated that between 4594 and 94,500 microbeads could be released in a single use. To examine the potential for microbeads to accumulate and transport chemicals they were exposed to a binary mixture of (3)H-phenanthrene and (14)C-DDT in seawater. The potential for transport of sorbed chemicals by microbeads was broadly similar to that of polythene (PE) particles used in previous sorption studies. In conclusion, cosmetic exfoliants are a potentially important, yet preventable source of microplastic contamination in the marine environment.

Enhanced desorption of persistent organic pollutants from microplastics under simulated physiological conditions.

Microplastics have the potential to uptake and release persistent organic pollutants (POPs); however, subsequent transfer to marine organisms is poorly understood. Some models estimating transfer of sorbed contaminants to organisms neglect the role of gut surfactants under differing physiological conditions in the gut (varying pH and temperature), examined here. We investigated the potential for polyvinylchloride (PVC) and polyethylene (PE) to sorb and desorb (14)C-DDT, (14)C-phenanthrene (Phe), (14)C-perfluorooctanoic acid (PFOA) and (14)C-di-2-ethylhexyl phthalate (DEHP). Desorption rates of POPs were quantified in seawater and under simulated gut conditions. Influence of pH and temperature was examined in order to represent cold and warm blooded organisms. Desorption rates were faster with gut surfactant, with a further substantial increase under conditions simulating warm blooded organisms. Desorption under gut conditions could be up to 30 times greater than in seawater alone. Of the POP/plastic combinations examined Phe with PE gave the highest potential for transport to organisms.

Competitive sorption of persistent organic pollutants onto microplastics in the marine environment.

Plastics are known to sorb persistent organic pollutants from seawater. However, studies to quantify sorption rates have only considered the affinity of chemicals in isolation, unlike the conditions in the environment where contaminants are present as complex mixtures. Here we examine whether phenanthrene and 4,4'-DDT, in a mixture, compete for sorption sites onto PVC with no added additives (unplasticised PVC or uPVC) and Ultra-High Molecular Weight polyethylene. Interactions were investigated by exposing particles of uPVC and UHMW PE to mixtures of 3H and 14C radiolabelled Phe and DDT. Changes in sorption capacity were modelled by applying a Freundlich binding sorption isotherms. An Extended Langmuir Model and an Interaction Factor Model were also applied to predict equilibrium concentrations of pollutants onto plastic. This study showed that in a bi-solute system, DDT exhibited no significantly different sorption behaviour than in single solute systems. However, DDT did appear to interfere with the sorption of Phe onto plastic, indicating an antagonistic effect.