ABSTRACT
In March 2017, a group of teachers of human disease/clinical medical science (HD/CMSD) representing the majority of schools from around the UK and Republic of Ireland met to discuss the current state of teaching of human disease and also to discuss how the delivery of this theme might evolve to inform improved healthcare. This study outlines how the original teaching in medicine and surgery to dental undergraduate students has developed into the theme of HD/CMSD reflecting changing needs as well as guidance from the regulators, and how different dental schools have developed their approaches to reach their current state. Each school was also asked to share a strengths, weakness, opportunities and threats (SWOT) analysis of their programme and to outline how they thought their HD/CMSD programme may develop. The school representatives who coordinate the delivery and assessment of HD/CMSD in the undergraduate curriculum have extensive insight in this area and are well-placed to shape the HD/CMSD development for the future.
Subject(s)
Clinical Medicine/trends , Curriculum/trends , Education, Dental/trends , Education, Medical, Undergraduate/trends , Schools, Dental/trends , Students, Dental , Faculty, Dental , Humans , Ireland , United KingdomABSTRACT
BACKGROUND: The current study objectives were to evaluate the influence of fluoridated glass fillers loading on the surface roughness, wettability, and adherence of candida and bacteria with and without saliva presence to a polymethylmethacrylate (PMMA) denture base material surface. METHODS: Four concentrations of fluoridated glass fillers were added to PMMA: 1%, 2.5%, 5% and 10% by weight pre-polymerization and 0% was the control. Discs of each concentration were fabricated (n = 5 for each variable). Surface roughness (Ra ) was measured using atomic force microscopy (AFM). Wettability was assessed by measuring the contact angle of a sessile drop of water. Specimens were incubated with Candida albicans, or Streptococcus mutans with and without saliva coating. Adherence was presented as a percentage of the colonized surface area, counted using an optical microscope at x100 magnification. RESULTS: The 10% group showed significantly greater roughness than the control and 1% groups; however, no significant differences in contact angle values were detected. The microbial adhesion was inversely proportional to the fluoridated glass fillers concentration where 10% concentration significantly decreased candidal and bacterial adhesion compared to others. Saliva coating significantly decreased microbial adhesion. CONCLUSIONS: It was concluded that fluoridated glass fillers could decrease microbial adhesion to acrylic denture base without adversely affecting surface properties.
Subject(s)
Bacterial Adhesion/drug effects , Denture Bases/microbiology , Fluorides/administration & dosage , Glass/chemistry , Polymethyl Methacrylate/pharmacology , Saliva/microbiology , Acrylic Resins , Candida albicans/isolation & purification , Dental Materials , Humans , Polymerization , Streptococcus mutans/isolation & purification , Surface Properties , WettabilityABSTRACT
BACKGROUND: The purpose of this study was to investigate the effect of fluoridated glass fillers on fluoride release, recharge and the flexural properties of modified polymethylmethacrylate (PMMA). METHODS: Specimens of PMMA denture base material with various loading of fluoridated glass fillers (0%, 1%, 2.5%, 5% and 10% by weight) were prepared. Flexural properties were evaluated on rectangular specimens (n = 10) aged in deionized water after 24 hours, 1 and 3 months. Disc specimens (n = 10) were aged for 43 days in deionized water and lactic acid (pH 4.0) and fluoride release was measured at numerous intervals. After ageing, specimens were recharged and fluoride re-release was recorded at 1, 3 and 7 days after recharge. RESULTS: Samples containing 2.5%, 5% and 10% glass fillers showed significantly (p < 0.05) greater levels of fluoride release compared with the control and 1% glass fillers specimens. All experimental specimens exhibited fluoride release in both media. The flexural strength of specimens decreased in proportion to the percentage filler inclusion with the modulus of elasticity values remaining within ISO Standard 1567. CONCLUSIONS: The modified PMMA with fluoridated glass fillers has the ability to release and re-release fluoride ion. Flexural strength decreased as glass filler uploading increased.
Subject(s)
Dental Abutments/adverse effects , Dental Caries/prevention & control , Denture Bases , Fluorides/administration & dosage , Glass/chemistry , Polymethyl Methacrylate/chemistry , Elasticity , Glass Ionomer Cements/chemistry , Materials Testing , Sodium Fluoride/administration & dosage , Sodium Fluoride/chemistry , Time FactorsABSTRACT
WHAT IS KNOWN AND OBJECTIVE: Drug prescribing is an essential part of inpatient care, and prescription errors/omissions have the potential to lead to disastrous consequences. Paediatric inpatient prescribing is particularly sensitive to error due to the weight-adjusted dosing of many medications prescribed in the acute setting. Previous studies have described a high incidence of error in adult drug chart completion, although no studies to date have assessed the error seen in the paediatric setting or accuracy of weight-adjusted dosing. Our objective was to determine the degree of error seen in paediatric drug prescribing for patients admitted under the care of oral and maxillofacial surgery and to explore practical and accessible methods through which error can be reduced. METHODS: We retrospectively evaluated inpatient drug charts to assess the prescribing practices seen for patients admitted under the care of oral and maxillofacial surgery in an NHS children's hospital and compared these findings against established hospital standards. The study also examined the distribution and variability of weight-adjusted dose prescribing in an attempt to set targets for auditing improvements following the implementation of changes. RESULTS AND DISCUSSION: Prescriptions were completed by a combination of doctors from maxillofacial and anaesthetic teams, with similar error rates seen in both specialties. 13% of drug charts contained one or more errors in frequency prescribing. For weight-adjusted drugs, a median under-dosage of -5·4% was noted, with an IQR of -12 to -0·6. Our study has confirmed that errors are common both in the manual completion of paediatric prescription charts and in the calculation of weight-adjusted doses. WHAT IS NEW AND CONCLUSION: We conclude that inaccuracies in prescription chart completion are a frequent occurrence and that dosage and frequency-prescribing errors may potentially act synergistically to create a significant disparity between the recommended and actual amount of drug that is delivered. Our study demonstrates a clear bias towards under-prescribing weight-adjusted doses which may be contributing to reduced efficacy of analgesia, among other drugs. Simple methods can be implemented on a specialty basis to improve the accuracy of both drug chart completion and weight-adjusted dosing.
Subject(s)
Drug Prescriptions , Medication Errors , Pharmacy Service, Hospital , Child , Hospitals, Pediatric , Humans , Retrospective StudiesABSTRACT
The aim of this retrospective observational cohort study was to analyse and report the 5-10-year survival rates of endosseous zygomatic implants used in the rehabilitation of the atrophic maxilla. Forty-three consecutive zygomatic implant placements in 25 patients were evaluated over a 5-10-year period. All zygomatic implant surgery was carried out under general anaesthesia. Nobel Biocare zygomatic machined-surface implants were used, and placement was undertaken using the modified sinus slot method. The main outcome measures and determinants for success were survival of the restored implants and the proportion of originally planned prostheses delivered to patients. Of the 25 patients treated, 12 were male and 13 were female; 19 were non-smokers, and the mean age at time of surgery was 64 years. Patients were treatment-planned for implant-retained bridgework, a removable prosthesis retained by fixed cast gold or milled titanium beams, or magnet-retained removable prostheses. A combination of zygomatic and conventional implants was used in all but one patient. In this study it was shown that the overall success rate for zygomatic implants was 86%, with six of the implants either failing to integrate or requiring removal due to persistent infection associated with the maxillary sinus. All patients received their planned prosthesis, although in six cases the method of retention required modification. This study illustrates that zygomatic implants are a successful and important treatment option when trying to restore the atrophic maxilla, with the potential to avoid additional augmentation/grafting procedures and resulting in a high long-term success rate.
Subject(s)
Dental Implantation, Endosseous/methods , Dental Implants , Jaw, Edentulous/surgery , Maxilla/surgery , Zygoma/surgery , Atrophy , Female , Humans , Jaw, Edentulous/diagnostic imaging , Male , Maxilla/diagnostic imaging , Middle Aged , Radiography, Panoramic , Retrospective Studies , Tomography, X-Ray Computed , Zygoma/diagnostic imagingABSTRACT
OBJECTIVE: The aim of this study was to assess the influence of impression technique selection on the dimensional accuracy of the produced casts. METHODOLOGY: Four impression techniques (single-stage, two-stage, monophase, and heavy/wash technique) were used to make addition silicone impressions of a phantom head maxillary jaw. The impression materials used were Aquasil, Extrude, and Imprint. Measurements on casts were made for the inter-abutment distances to assess dimensional accuracy. RESULTS: There was a significant difference (p < 0.05) for the anteroposterior distances with the single-stage technique. The crossarch distances were slightly increased compared with the master model for all techniques, but significant statistical differences were only recorded for the single-stage technique and the monophase technique. The monophase technique demonstrated irregular results. The heavy/wash technique showed no significant differences for all the measurements compared with the standard model. CONCLUSION: The results suggest that the selection of impression technique is an important factor that can affect the dimensional accuracy of the subsequent models which are used for indirect restorations.
Subject(s)
Dental Impression Materials , Dental Impression Technique , Polyvinyls , Siloxanes , Analysis of Variance , Models, Dental , Silicone ElastomersABSTRACT
Here, we describe a case in which A-scan ultrasound biometry was used to differentially diagnose the cause of reduced vision in a patient with keratoconus. A patient with keratoconus presented with reduced visual acuity in one eye, not improvable above 6/18 with specialist keratoconus contact lens fitting. This monocular amblyopia was attributed to previous anisometropic ametropia by the use of ultrasound biometry. The report demonstrates the usefulness of ultrasound biometry in the detection of amblyopia in circumstances in which a previous assessment of amblyopia is not possible. This information will impact upon decisions made for the future clinical management in this case, especially if vision deteriorates so that a corneal graft is required.
Subject(s)
Amblyopia/diagnostic imaging , Cornea/diagnostic imaging , Keratoconus/complications , Microscopy, Acoustic/methods , Adult , Amblyopia/etiology , Cornea/pathology , Corneal Topography , Diagnosis, Differential , Disease Progression , Female , Humans , Keratoconus/diagnostic imaging , Keratoconus/pathology , Visual AcuityABSTRACT
Garlic (Allium sativum) has long been known to have antibacterial, antifungal and antiviral properties but there are few data on its effects against oral bacterial species particularly putative periodontal pathogens or their enzymes. Filter sterilised, aqueous extract of garlic was tested for ability to inhibit the growth of a range of oral species and to inhibit the trypsin-like and total protease activity Porphyromonas gingivalis. The garlic extract (57.1% (w/v), containing 220 microg/ml allicin) inhibited the growth and killed most of the organisms tested. In general, the minimal inhibitory and minimum bactericidal concentrations for the Gram-negative strains (garlic MIC range 35.7-1.1 mg/ml; allicin mean MIC 4.1 microg/ml; mean MBC 7.9 microg/ml) were lower than those for the Gram-positive strains tested (garlic MIC range 142.7-35.7 mg/ml; allicin mean MIC 27.5 microg/ml; mean MBC 91.9 microg/ml). Also, of the organisms tested, the putative periodontal pathogens had among the lowest MICs (17.8-1.1 mg/ml garlic) and MBCs (35.7-1.1 mg/ml garlic). Time-kill curves for Streptococcus mutans and P. ginigvalis, showed that killing of the latter started almost immediately, whereas there was a delay before S. mutans was killed. The garlic extract also inhibited the trypsin-like and total protease activity of P. gingivalis by 92.7% and 94.88%, respectively. These data indicate that garlic extract inhibits the growth of oral pathogens and certain proteases and so may have therapeutic value, particularly for periodontitis.
Subject(s)
Anti-Bacterial Agents/pharmacology , Bacteria/drug effects , Garlic , Mouth/microbiology , Phytotherapy , Bacteria/growth & development , Humans , Microbial Sensitivity Tests/methods , Peptide Hydrolases/metabolism , Plant Extracts/pharmacology , Porphyromonas gingivalis/drug effects , Porphyromonas gingivalis/enzymology , Porphyromonas gingivalis/growth & development , Protease Inhibitors/pharmacologyABSTRACT
Synovial chondromatosis of the temporomandibular joint (TMJ) is a very rare condition. It is characterised by the presence of loose bodies in the joint space. Clinical signs, histopathological findings and radiography play an important role in the diagnostic process. Conventional X-rays have shown to be of limited value, for they fail to depict the intra-articular loose bodies in a significant amount of cases. Axial as well as coronal computer tomography (CT) is extremely useful in detecting loose bodies in the temporomandibular joint (TMJ). In this report we present and discuss a further case, and the use of CT in the diagnosis of TMJ-synovial chondromatosis is illustrated.
Subject(s)
Chondromatosis, Synovial/diagnostic imaging , Temporomandibular Joint Disorders/diagnostic imaging , Tomography, X-Ray Computed , Chondromatosis, Synovial/pathology , Humans , Joint Loose Bodies/diagnostic imaging , Joint Loose Bodies/pathology , Male , Mandibular Condyle/diagnostic imaging , Mandibular Condyle/pathology , Middle Aged , Synovial Membrane/pathology , Temporomandibular Joint Disorders/pathologyABSTRACT
Leprosy bacilli of human origin were inoculated into a white-handed gibbon by the i.v. and i.p. routes, and also locally into ears, testis and around an ulnar nerve. The animal was observed closely during a period of nearly 15 years and did not exhibit any clinical evidence of cutaneous or neurological disease. At death, a wide range of tissues was taken for bacterial counts and histological examination, and a disseminated and progressive infection was demonstrated. Acid-fast bacilli were found in many sites; their morphological appearance distribution in nerves, and pattern of multiplication in mouse foot-pads, and also the presence of anti-mycobacterial antibody in the serum and the absence of specific lymphocyte transformation were all in keeping with an infection by Mycobacterium leprae, at an early lepromatous stage. This is probably the first fully documented report of experimental lepromatous infection in a primate. The findings are discussed in relation to the long incubation period of le promatous leprosy and the difficulties of diagnosing the disease at an early stage in man.