One-Year Multicenter Randomised Controlled Trial Comparing OT Equator® and Locator Attachments to Retain an Early Loaded Implant Overdenture on Two Implants.

This investigation aimed to compare the effectiveness of the OT Equator® (Rhein, Bologna, Italy) and the Locator attachment systems used to retain early loaded implant-retained overdentures. This study was designed as a multicenter randomised controlled trial of parallel groups. After implant placement, the patients were randomised to receive OT Equator® attachments in the test group or Locator attachments in the control group. The outcome measures were implant and prosthetic success and survival rates, any biological and technical complication, marginal bone loss, patients' satisfaction, and periodontal parameters. Overall, 42 patients were consecutively enrolled and treated. One implant was lost in the control group, while no implants were lost in the test group. No prostheses failed in both groups. Only a few complications were experienced in both groups. The main was represented by loss of retention of the attachments (retentive caps). The OT Equator® attachment showed statistically lower periodontal parameters. In conclusion, both attachment systems were suitable for overdenture implant retention.

Minimally Invasive Treatment of Lateral Incisors with Guided One-Piece or Two-Piece Titanium-Made Narrow Diameter Implants: A Retrospective Comparative Study with Up to Two Years Follow-Up.

Restoring teeth with dental implants has become the gold standard in recent years, especially in the esthetic zone. However, limited amount of available bone as well as limited interdental space in the anterior zone may create problems for implant treatment. Narrow diameter implants (NDI) may be a treatment option to resolve the above-mentioned limitations and providing minimally invasive implant therapy without additional regenerative procedures. In this retrospective study, a comparison of clinical and radiographic outcomes between one-piece and two-piece titanium-made NDIs was done with the follow-up of two years after loading. Twenty-three NDI cases were analyzed, 11 in the one-piece implant group (group one) and 12 in the two-piece implant group (group two). The outcomes were implant and prosthetic failures, any complications occurred, peri-implant bone level changes, and as well as the Pink Esthetic score. No implant or prosthetic failures, as well as, no complications were reported at the two-year follow-up examination. At the same time the marginal bone loss was 0.23 ± 0.11 in the group one and 0.18 ± 0.12 in the group two. Difference was not statistically significant (p = 0.3339). The Pink Esthetic Score, recorded two years after definitive loading, was 12.6 ± 0.97 in the group one and 12.2 ± 0.92 in the group two, with no statistically significant difference between groups (p = 0.3554). With the limitations of the present study, including the small sample size and short follow-up, it is possible to conclude that either one and two-piece NDI can be successfully used to restore lateral incisors with comparable results within the two years of follow-up.

Implant Placement Following Crestal Sinus Lift with Sequential Drills and Osteotomes: Five Years after Final Loading Results from a Retrospective Study.

The aim of this retrospective study was to clinically evaluate the five-year outcomes of implants placed following a combined approach to the sinus, consisting of sequential drills and osteotomes. Medical records of patients with implants placed in combination with crestal sinus lift using sequential drills and osteotomes, with a residual alveolar bone crest between 4 to 8 mm, and a follow-up of at least five years after final loading, were evaluated. Outcomes were implant and prosthetic survival and success rates, any complication, and marginal bone loss. Data from 96 patients (53 women and 43 men; mean age 54.7 years; range 23-79 years) were collected. A total of 105 single implants were analyzed. After five years of function, two implants were lost and two prostheses failed. No major biological or prosthetic complications occurred. At the five-year examination, the marginal bone loss was 1.24 ± 0.28 mm. Within the limitations of this retrospective study it can be concluded that implants placed following a combined approach to the sinus consisting of sequential drills and osteotomes seem to be a viable option for the treatment of posterior atrophic edentulous maxilla.

Histological and Histomorphometric Evaluation of Post-Extractive Sites Filled with a New Bone Substitute with or without Autologous Plate Concentrates: One-Year Randomized Controlled Trial.

The purpose of the present study was to evaluate the histological and histomorphometric characteristics of post-extraction sites grafted with decellularized bovine compact bone from bovine femur, mixed and unmixed with leukocyte- and platelet-rich fibrin after four months of healing. This study was designed as a randomized controlled trial of parallel groups. Patients in need of a single, implant-supported restoration to replace a hopeless tooth were recruited for tooth extraction and implant placement four months after socket preservation procedure. After tooth extraction, patients were randomly allocated to receive decellularized bovine compact bone from bovine femur, mixed and unmixed with leukocyte- and platelet-rich fibrin. After four months of healing, tapered implants were inserted with an insertion torque between 35 and 45 Ncm. Two months later, implants were loaded with screw-retained definitive crowns. Outcome measures were implant (ISR) and prosthesis (PSR) survival rates, complications, histological and histomorphometric analyses, radiographic marginal bone-level changes, and patients' satisfaction. Clinical data were collected up to one year after tooth extraction and socket preservation procedures. Thirty patients were consecutively enrolled in the trial (15 in each group). Unfortunately, due to the COVID-19 pandemic, bone samples were collected only in 19 patients. Two implants failed before definitive prosthesis delivery (ISR 93.3%). No prosthesis failed (PSR 100%). Three complications were experienced in the control group. The mean bone percentage was 40.64 ± 18.76 in the test group and 33.40 ± 22.38 in the control group. The difference was not statistically significant (p = 0.4846). The mean soft tissue percentage was 32.55 ± 19.45 in the test group and 55.23 ± 17.64 in the control group. The difference was statistically significant (p = 0.0235). The mean residual graft was 24.59 ± 18.39 in the test group and 11.37 ± 12.12 in the control group. The difference was not statistically significant (p = 0.0992). Mean marginal bone loss, as well as patient satisfaction, showed no differences between groups. With the limitations of the present study, socket preservation with L-PRF mixed with decellularized bovine compact bone demonstrated favorable results, comparing with decellularized bovine compact bone from bovine femur alone. Further studies with larger sample size and longer follow-up are needed to confirm these preliminary results.

Three-Year Retrospective Comparative Study between Implants with Same Body-Design but Different Crest Module Configurations.

Crest module can be defined as the portion of a two-piece implant designed to retain the prosthetic components and to allows the maintenance of the peri-implant tissues in the transition zone. AIM: To evaluate the three-year after loading clinical and radiographic data, collected from patients that received a prosthetic rehabilitation on conical connection implants with partial machined collar (PMC; CC Group) and same body-designed implants, with flat-to-flat connection and groovy neck design (FC Group). MATERIALS AND METHODS: A retrospective chart review of previously collected data, including documents, radiographs, and pictures of patients who received at least one implant-supported restoration on NobelReplace CC PMC or NobelReplace Tapered Groovy implants was performed. Patients with at least three years of follow-up after final loading were considered for this study. Outcomes measures were implant and prosthesis failures, any biological or technical complications, marginal bone loss. RESULTS: Eight-two patients (44 women, 38 men; average age 55.6) with 152 implants were selected and divided in two groups with 77 (CC group) and 75 (FC group), respectively. Three years after final loading, one implant in CC group failed (98.7% survival rate), while no implants failed in FC group (100% survival rate). One restoration failed in CC group (98.7% survival rate) with no restoration failing in the FC one (100% survival rate). Differences were not statistically significant (p = 1.0). Three years after final loading, mean marginal bone loss was 0.22 ± 0.06 mm (95% CI 0.2-0.24) in CC group and 0.62 ± 0.30 mm (95% CI 0.52-0.72) in FC group. The difference was statistically significant (0.40 ± 0.13 mm; 95% CI 0.3-0.5; p = 0.003). CONCLUSION: with the limitation of this retrospective comparative study, implants with conical connection and partial machined collar seem to achieve a trend of superior outcomes if compared with implants with flat connection and groovy collar design.

Customized 3D-Printed Titanium Mesh Developed to Regenerate a Complex Bone Defect in the Aesthetic Zone: A Case Report Approached with a Fully Digital Workflow.

Alveolar-ridge augmentation, anterior aesthetics, and digital technologies are probably the most popular topics in the dental-implant field. The aim of this report is to present a clinical case of severe atrophy of the anterior maxilla in a younger female patient, treated with a titanium membrane customized with computer-aided design/computer-aided manufacturing (CAD/CAM), simultaneous guided implant placement, and a fully digital workflow. A young female patient with a history of maxillary trauma was treated and followed-up for 1 year after implant placement. A narrow implant was inserted in a prosthetically driven position with the aid of computer-guided surgery. In the same surgical section, a customized implantable titanium mesh was applied. The scaffold was designed according to the contralateral maxillary outline in order to recreate a favorable maxillary bone volume. Finally, highly aesthetic, CAD/CAM, metal-free restorations were delivered using novel digital technologies.

Platform switching versus regular platform single implants: 5-year post-loading results from a randomised controlled trial.

PURPOSE: To compare the clinical and radiographic outcomes of platform switching (PS) and regular platform (RP) implants. MATERIALS AND METHODS: This study was designed as a randomised controlled split-mouth trial. Eighteen patients, with bilaterally missing single premolars or molars to be restored with implant-supported single crowns, were consecutively enrolled. Implant sites were randomly assigned to be treated according to the PS concept (PS group), or with matching implant-abutment diameters (RP group). A total of 36 implants were placed in healed bone, with an insertion torque between 35 and 45 Ncm, according to a one-stage protocol. All the implants were loaded with a screw-retained provisional crown 3 months after implant insertion. Definitive screw-retained single crowns were delivered 2 months later. Outcome measures were implant and prosthetic survival rates, biological and prosthetic complications, marginal bone level (MBL) changes, pocket probing depth (PPD) and bleeding on probing (BOP). Clinical data were collected at implant placement (baseline), implant loading (3 months later) and at 9, 36 and 60 months after loading. RESULTS: One patient dropped out after 4 years of follow-up. No implant failed and no prosthetic complications were recorded during the study period. One patient experienced mucosal inflammation with positive BOP (RP group) after 3 months and three patients had bilateral peri-implant mucosal inflammation with positive BOP at 6, 24 and 36 months, respectively. No other biological complications were recorded up to 60 months of follow-up. There were no statistically significant differences between groups for complications (3/18 versus 4/18; P = 1.0). Nine months after loading the mean MBL was 0.93 ± 0.26 mm (95% CI 0.81 to 1.05) for RP implants and 0.84 ± 0.23 mm (95% CI 0.73 to 0.95) for PS implants. No statistically significant difference was observed between the groups (P = 0.18). Thirty-six months after loading, the mean MBL was 1.09 ± 0.31 mm (95% CI 0.95 to 1.24) in the RP group and 1.06 ± 0.24 mm (95% CI 0.94 to 1.17) in the PS group, with no statistically significant difference between groups (P = 0.70). Sixty months after loading the mean MBL was 1.24 ± 0.39 mm (95% CI 1.05 to 1.43) in the RP group and 1.20 ± 0.21 mm (95% CI 1.01 to 1.39) in the PS group, with no statistically significant difference between the groups (P = 0.85). The mean PPD was 2.58 ± 0.58 mm (95% CI 2.32 to 2.84) in the RP group and 2.40 ± 0.72 mm (95% CI 2.21 to 2.59) in the PS group at 60 months follow-up, with no statistically significant difference between the groups (P = 0.49). The mean BOP was 0.90 ± 0.88 (95% CI 0.58 to 1.22) in the RP group and 0.93 ± 0.97 (95% CI 0.51 to 1.35) in the PS group at 60 months of follow-up, with no statistically significant difference between the groups (P = 0.85). CONCLUSIONS: Implants restored according to the PS concept and matching implant-abutment diameters showed comparable clinical and radiographic results up to 5 years after loading.

Sinus augmentation grafting with anorganic bovine bone versus 50% autologous bone mixed with 50% anorganic bovine bone: 5 years after loading results from a randomised controlled trial.

PURPOSE: To compare the outcomes of implants inserted in maxillary sinuses augmented with 100% anorganic bovine bone (ABB) grafts versus mixed with 50% ABB and 50% autologous bone graft using a lateral window approach. MATERIALS AND METHODS: This study was designed as a randomised controlled trial of parallel groups. Patients in need of an implant-supported prosthesis in maxillary posterior areas, with a residual alveolar bone height ranging between 0 and 4 mm, were recruited for lateral sinus grafting and implant placement. Patients were randomly allocated to receive two different graft materials according to a parallel group design: group A was grafted with 50% ABB and 50% autogenous bone; group B was grafted with 100% ABB. After 7 months, tapered implants were inserted with an insertion torque between 20 and 45 Ncm. Three months later implants were loaded with screw-retained temporary crowns. Definitive crowns were delivered after 3 months. Outcome measures were implant and prosthesis survival rates, complications, radiographic marginal bone-level changes, probing pocket depths (PPDs) and bleeding on probing (BOP). Clinical data were collected at definitive prosthesis delivery, and 1, 2 and 5 years after definitive loading. RESULTS: Thirty-two consecutive patients were treated with 32 sinus elevation procedures (16 group A, 16 group B). A total of 46 implants were inserted. One patient (with two implants) dropped out in group A, and two patients (with three implants) dropped out in group B. No implant/crown failed by the end of the study. Three complications (one sinus membrane perforation and two chipping of the ceramic) were observed in three patients in group A, versus none in group B (relative risk was 0.81; 95% CI 0.64-1.03; P = 0.225). At the 2-year follow-up, the mean marginal bone loss was 1.18 ± 0.50 mm (95% CI 0.95-1.45 mm) in group A and 1.28 ± 0.48 mm (95% CI 0.97-1.43 mm) in group B, with no statistically significant differences between the two groups (difference 0.11 ± 0.22 mm; 95% CI -0.06-0.16 mm; P = 0.586). At the 5-year follow-up, the mean marginal bone loss was 1.37 ± 0.48 mm (95% CI 1.13-1.86 mm) in group A and 1.42 ± 0.48 mm (95% CI 1.17-1.90 mm) in group B (difference 0.15 ± 0.08 mm; 95% CI 0.10-0.22 mm; P = 0.426). At the 2-year follow-up, the mean PPD value was 2.70 ± 0.39 mm for group A and 2.54 ± 0.66 mm for group B, with no statistically significant difference between groups (difference 0.17 ± 0.39 mm; 95% CI 0.06-0.32 mm; P = 0.456). At the 5-year follow-up, the mean PPD value was 3.20 ± 0.44 mm for group A and 3.32 ± 0.49 mm for group B (difference 0.12 ± 0.43 mm; 95% CI 0.02-0.22 mm; P = 0.672). At the 2-year follow-up, the mean BOP value was 1.21 ± 0.79 for group A and 1.28 ± 0.68 for group B (difference 0.06 ± 0.49; 95% CI -0.23-0.25; P = 0.297), and at the 5-year follow-up, the mean BOP value was 1.77 ± 0.62 for group A and 1.91 ± 0.48 for group B (difference: 0.14 ± 0.51; 95% CI -0.05-0.33; P = 0.492). CONCLUSIONS: Within the limitations of this study, the present data confirm similar clinical outcomes of implants inserted in sinuses grafted with ABB versus implants inserted in sinuses grafted with mixed 50% ABB and 50% autologous bone.

Horizontal ridge augmentation using GBR with a native collagen membrane and 1:1 ratio of particulate xenograft and autologous bone: A 3-year after final loading prospective clinical study.

BACKGROUND: Cawood-Howell class IV atrophies, also known as "knife-edge" ridges, represent a serious horizontal defect, making the placement of regular implants challenging. AIM: To clinically and radiographically evaluate bone regeneration of severe horizontal bone defects with 3 years of follow-up. MATERIALS AND METHODS: This study was designed as a single cohort, prospective clinical trial. Patients having horizontal bone width of 4 mm or less in the posterior mandible or maxilla were treated with resorbable collagen membranes and a 1:1 mixture of anorganic bovine bone (ABB) and autogenous bone. Implants were inserted and loaded 7 months later. Outcomes were implant and prosthetic survival rates, any biological and prosthetic complications, horizontal and volumetric bone dimensional changes measured on cone beam computer tomography (CBCT), peri-implant marginal bone level (MBL) changes measured on periapical radiographs, plaque index (PI), and bleeding on probing (BOP). RESULTS: Eighteen patients received 55 implants. No patient dropped-out. No implant and prosthetic failures and no complications were recorded. Super imposition of pre and 7-month postoperative CBCT scans revealed an average horizontal bone gain of 5.03 ± 2.15 mm (95% CI: 4.13-5.92 mm). After 3 years, mean MBL was 1.15 ± 0.28 mm (95% CI 0.84-1.22 mm). The PI was 11.6%, and BOP was 5.2%. CONCLUSION: Within the limitations of the present study, high implant survival rate and high average bone augmentation seem to validate the use of collagen resorbable membranes with a 1:1 mixture of particulate ABB and autogenous bone for the reconstruction of Cawood-Howell class IV alveolar ridge atrophies.

Accuracy of computer-assisted template-based implant placement using conventional impression and scan model or intraoral digital impression: A randomised controlled trial with 1 year of follow-up.

PURPOSE: To compare accuracy and complications of computer-assisted template-based implant placement using conventional impression and scan of a physical stone cast or intraoral scanning to rehabilitate partially edentulous patients. MATERIALS AND METHODS: Any partially edentulous patients with at least five residual teeth, requiring at least one implant to be planned on three-dimensional (3D) cone beam computed tomography (CBCT) scan according to a computer-assisted template-based protocol were enrolled. Patients were randomised according to a parallel-group design into two arms: intraoral digital impression (fully digital group) or conventional impression and scan model (conventional group). Implants were placed flapless or with a minimally invasive flap, and conventionally loaded after 5 months. Outcome measures were implant and prosthetic success, complications, accuracy and peri-implant marginal bone loss. Three deviation parameters (angular, horizontal and vertical) were defined to evaluate the discrepancy between the planned and placed implant positions. Results were compared using a mixed-model repeated-measures analysis of variance (α = 0.05). RESULTS: Twenty patients (11 females and 9 males; mean age 44.6 years old) were randomised to the fully digital group (10 patients with 28 implants) or conventional group (10 patients with 29 implants). No patients dropped out. No implant or prosthesis failed up to 1 year after loading. One implant in the fully digital group was placed freehand due to limited inter-arch space. No biological or mechanical complications were experienced during follow-up. Difference between groups were not statistically significant (P = 0.999). The mean error in angle was 2.25 ± 1.41 degrees (range 0.30 to 5.00 degrees; 95% CI: 1.38 to 3.12 degrees) in the fully digital group and 2.10 ± 1.18 degrees (range 0.30 to 5.80 degrees; 95% CI: 1.37 to 2.83 degrees) in the conventional group. The difference was not statistically significant (-0.15 ± 1.63 degrees; range -3.20 to 2.90 degrees; 95% CI: -0.87 to 0.57 degrees; P = 0.668); in the horizontal plane (mesio-distal), the mean error was 0.52 ± 0.30 mm (range 0.10 to 1.10 mm; 95% CI: 0.33 to 0.70 mm) in the fully digital group and 0.44 ± 0.26 mm (range 0.10 to 0.90 mm; 95% CI: 0.27 to 0.60 mm) in the conventional group. The difference was not statistically significant (-0.08 ± 0.38 degrees; range -1.0 to 0.60 degrees; 95% CI: -0.32 to 0.16 degrees; P = 0.279); in the vertical plane (apico-coronal), the mean error was 0.58 ± 0.44 mm (range 0.00 to 1.60 mm; 95% CI: 0.31 to 0.85) in the fully digital group and 0.46 ± 0.34 mm (range 0.00 to 1.20 mm; 95% CI: 0.25 to 0.67) in the conventional group. The difference was not statistically significant (-0.12 ± 0.59 degrees; range -1.20 to 1.00 degrees; 95% CI: -0.49 to 0.24 degrees; P = 0.250). One year after loading, the mean marginal bone loss was 0.14 ± 0.12 mm (range -0.10 to 0.40 mm; 95% CI: 0.07 to 0.21 mm) in the fully digital group and 0.18 ± 0.13 mm (range -0.10 to 0.60 mm; 95% CI: 0.09 to 0.26 mm). The difference was not statistically significant (-0.04 ± 0.19 mm; range -0.50 to 0.30 mm; 95% CI: -0.16 to 0.08 mm; P = 0.294). CONCLUSIONS: With the limitations of the present trial, implant rehabilitations planned using intraoral digital impressions showed similar results compared to conventional impression and scan model. Digital impression may be a viable option for the rehabilitation of partial edentulous patients when computer-guided template-assisted implant placement is used.

Immediate non-occlusal versus delayed loading of mandibular first molars. Five-year results from a randomised controlled trial.

PURPOSE: To compare outcomes of immediate non-occlusal loading with delayed implant loading in the bilateral replacement of mandibular first molars. MATERIALS AND METHODS: This study was designed as a split-mouth, randomised controlled trial. Twenty patients with bilaterally missing mandibular first molars randomly received immediately or conventionally loaded single implants. One molar was restored with a non-occlusal temporary crown within 24 hours after implant placement (immediate loading group, IL) while the contralateral molar was restored with a definitive crown 4 to 5 months later (delayed loading group, DL). A total of 40 implants were installed. All implants were inserted in healed bone with an insertion torque between 35 and 45 Ncm. Outcome measures were implant failure, complications, radiographic marginal bone level changes, probing pocket depths (PPDs) and bleeding on probing (BOP). Clinical data were collected at implant placement, and after 6, 12 and 60 months. RESULTS: No patients dropped out and no implant failed. Only minor prosthetic complications were observed (two provisional acrylic crown fractures in the IL group and four ceramic chipping in the DL group). Two patients had bilateral peri-implant mucosal inflammation with BOP after 6 months. The differences between groups were not statistically significant (OR = 0.500; 95% CI: 0.045 to 3.489; P = 0.6831). At the 1-year follow-up examination, the mean marginal bone level was 0.83 ± 0.16 mm (95% CI: 0.75 to 0.91) in the IL group and 0.86 ± 0.16 mm (95% CI: 0.78 to 0.94) in the DL group, with no statistically significant differences between groups (difference = 0.03 ± 0.15 mm; 95% CI: -0.07 to 0.07; P = 0.53). After 5 years, mean marginal bone level was 1.06 ± 0.38 mm (95% CI: 0.97 to 1.15) in the IL group and 1.07 ± 0.32 mm (95% CI: 0.95 to 1.16) in the DL group, with no statistically significant differences between groups (difference = 0.01 ± 0.22 mm; 95% CI: -0.10 to 0.10; P = 0.96). The mean marginal bone loss after 5 years was 0.62 ± 0.45 mm in the IL group and 0.69 ± 0.33 mm in the DL group (difference = 0.07 ± 0.32 mm; 95% CI: -0.10 to 0.18; P = 0.567). At the 5-year follow-up the mean PPD and BOP values were 2.82 ± 0.65 mm and 1.17 ± 0.92 in the IL group, and 2.85 ± 0.53 mm and 1.17 ± 0.86 in the DL group, respectively. No significant differences were found (difference = 0.03 ± 0.15 mm; 95% CI: -0.15 to 0.21; P = 0.990; and 0.01 ± 0.07; 95% CI: -0.06 to 0.08; P = 1.000, respectively). CONCLUSIONS: Within the limitations of this study, the present data seem to confirm the hypothesis that the clinical outcome of immediate versus delayed loading of implants in mandibular fist molar sites is comparable.

1-year results from a split-mouth randomised controlled pilot trial comparing implants with 0.75 mm of machined collar placed at bone level or supracrestally.

PURPOSE: The present study evaluated the hypothesis that implants inserted at bone level or supracrestally have different outcomes in single tooth replacements against the alternative hypothesis of no difference. MATERIALS AND METHODS: This study was designed as a randomised, split-mouth, controlled pilot trial. Ten patients, each missing two bicuspids or molars, were treated with 20 implants featuring 0.75 mm of machined collar. Each patient randomly received one implant inserted at bone level (BL) and one inserted 0.75 mm to 1 mm above the alveolar crest (SC), measured with a periodontal probe during surgery. All the implants were inserted into healed healthy bone with an insertion torque ranging between 35 Ncm and 45 Ncm. Both implants were loaded with screw-retained acrylic-resin temporary crowns 3 months after implant insertion and 3 months later with screw-retained zirconia-ceramic definitive crowns. Outcome measures were implant/crown failures, biological and prosthetic complications, radiographic marginal bone level changes (MBL), probing pocket depth (PPD) and bleeding on probing (BOP). Clinical data were collected at baseline (implant insertion) and 1 year after implant placement (9 months after initial loading). RESULTS: After 1 year of follow-up, no patients dropped out, no implants failed, and no complications occurred. The mean MBL at the 1-year follow-up was 0.28 ± 0.21 mm in the SC group and 0.93 ± 0.37 mm in the BL group. While the difference in MBL was statistically significant between the two treatment groups (difference 0.65 ± 0.34; 95% CI = 0.59 to 1.01; P = 0.0001), the soft-tissue parameters were not statistically different. The mean PPD was 2.63 ± 2.4 in the SC group and 2.40 ± 0.70 in the BL group (P = 0.419) and mean BOP was 0.50 ± 0.71 in the SC group and 0.40 ± 0.70 in the BL group (P = 0.754). CONCLUSIONS: The smooth-collar implants inserted supracrestally showed 0.7 mm less radiographic marginal bone loss compared with implants inserted at the bone level 9 months after loading.

One-stage horizontal guided bone regeneration with autologous bone, anorganic bovine bone and collagen membranes: Follow-up of a prospective study 30 months after loading.

PURPOSE: To present the medium-term results of one-stage guided bone regeneration (GBR) using autologous bone and anorganic bovine bone, placed in layers, in association with resorbable collagen membranes, for the reconstruction of horizontal bony defects. MATERIALS AND METHODS: This study was designed as an uncontrolled prospective study. Partially edentulous patients, having less than 6.0 mm and more than 4.0 mm of residual horizontal bone width were selected and consecutively treated with simultaneously implant installation and bone regeneration by using 2.0 mm of autologous bone and 2.0 mm of anorganic bovine bone that was placed in layers and then covered with a resorbable collagen membrane. Outcome measures were: implant and prosthesis failures, any complications, peri-implant marginal bone level changes, probing pocket depth (PPD) and bleeding on probing (BOP). RESULTS: In total, 45 consecutive patients (20 male, 25 female) with a mean age of 52.1 years each received at least one GBR procedure, with contemporary placement of 63 implants. At the 3-year follow-up examination, no patient had dropped out and no deviation from the original protocol had occurred. No implant or prosthesis failed. In six patients (13.3%) the collagen membrane was slightly exposed 1 to 2 weeks after bone reconstruction. Four of these patients were moderate smokers. Post-hoc analysis using Fisher's exact test found significant association (P = 0.0139) between a smoking habit and early membrane exposure. Mean marginal bone loss experienced between initial loading and 30 months afterwards was 0.60 ± 0.20 mm (95% CI 0.54 - 0.66). The mean BOP values measured at the definitive restoration delivery were 1.23 ± 0.93, while 2 years later they were 1.17 ± 0.78. The difference was not statistically significant (-0.06 ± 0.76; P = 0.569). The mean PPD values measured at the definitive restoration delivery were 2.62 ± 0.59 mm, while 2 years later they were 2.60 ± 0.54 mm. The difference was not statistically significant (-0.03 ± 0.62; P = 0.765). CONCLUSIONS: Within the limitations of the present study, the use of a 2.0 mm layer of particulated autologous bone on the implant threads, and a 2.0 mm layer of anorganic bovine to cover the resorbed ridge, in combination with the resorbable collagen membrane, seems to be a viable treatment option for the reconstruction of horizontal bony defects.

Oral stigmatic lesions of gastroesophageal reflux disease (GERD): Informe de un caso / Lesiones en la cavidad bucal en reflujo gastroesofágico

Patients with gastroesophageal reflux may have extra-esophageal manifestations. We report a 46 years old ex-smoker woman presenting with a sensation of burning mouth, xerostomia and glossitis. The patient had a history of heartburn, dysphonia and cough. Mouth examination showed a bad hygiene and abundant accumulation of plaque. Esophageal pH measurement was abnormal. Laryngoscopy showed a posterior laryngeal inflammation and mucous secretion. With these data, a diagnosis of gastroesophageal reflux was reached.

Los pacientes con reflujo gastroesofágico pueden tener manifestaciones extra esofágicas. Presentamos una mujer ex fumadora de 46 años que se presentó con sensación de quemazón en la boca, xerostomia y glositis. La paciente tenía además una historia de pirosis retroesternal, disfonía y tos. El examen bucal mostró una mala higiene bucal con abundante acumulación de sarro. Una medición de pH esofágico fue anormal. La laringoscopia mostró una inflamación laríngea posterior y secreción mucosa. Con estos antecedentes se llegó al diagnóstico de reflujo gastroesofágico.

Oral stigmatic lesions of gastroesophageal reflux disease (GERD).

Patients with gastroesophageal reflux may have extra-esophageal manifestations. We report a 46 years old ex-smoker woman presenting with a sensation of burning mouth, xerostomia and glossitis. The patient had a history of heartburn, dysphonia and cough. Mouth examination showed a bad hygiene and abundant accumulation of plaque. Esophageal pH measurement was abnormal. Laryngoscopy showed a posterior laryngeal inflammation and mucous secretion. With these data, a diagnosis of gastroesophageal reflux was reached.

A systematic review of microsurgical reconstruction of the jaws using vascularized fibula flap technique in patients with bisphosphonate-related osteonecrosis.

OBJECTIVE: The aim of this systematic review was to assess the role of microsurgical reconstruction of the jaws in patients with bisphosphonate-related osteonecrosis, and biological complications after an observation period of at least 12 months. MATERIAL AND METHODS: An electronic MEDLINE search supplemented by manual searching was conducted to identify studies reporting data of at least 12 months observation on the microsurgical reconstruction of the jaws in patients with bisphosphonate-related osteonecrosis. RESULTS: Four studies resulted eligible for the analysis yielded. Three out of five studies were free of complications, with a success rate of 100% as no recurrence of osteonecrosis was registered. CONCLUSIONS: Microsurgical reconstruction of the jaws represents a valid treatment modality in patients with bisphosphonate-related osteonecrosis at 3rd stage of the disease.

A systematic review of microsurgical reconstruction of the jaws using vascularized fibula flap technique in patients with bisphosphonate-related osteonecrosis

OBJECTIVE: The aim of this systematic review was to assess the role of microsurgical reconstruction of the jaws in patients with bisphosphonate-related osteonecrosis, and biological complications after an observation period of at least 12 months. Material and methods: An electronic MEDLINE search supplemented by manual searching was conducted to identify studies reporting data of at least 12 months observation on the microsurgical reconstruction of the jaws in patients with bisphosphonate-related osteonecrosis. RESULTS: Four studies resulted eligible for the analysis yielded. Three out of five studies were free of complications, with a success rate of 100 percent as no recurrence of osteonecrosis was registered. CONCLUSIONS: Microsurgical reconstruction of the jaws represents a valid treatment modality in patients with bisphosphonate-related osteonecrosis at 3rd stage of the disease.

Use of Lugol's iodine in oral cancer diagnosis: an overview.

Early diagnosis of oral squamous cell carcinoma (OSCC) still represents an important challenge for clinicians and patients. Vital staining such as toluidine blue and Lugol's iodine solution, are routinely used in the OSCC detection but few data exist about the last one. A literature review is made to evaluate the effectiveness and safety of Lugol's iodine solution in OSCC detection and in its margins demarcation. A review was made of the studies published between 1990 and 2010 in relation to the application of Lugol's iodine for OSCC detection and a better definition of its margins. Data obtained point to the utility and the safety of Lugol's iodine when employed for detection and margins delineation of OSCC and dysplasia. All the studies consulted found the Lugol's iodine to be effective, cheap and easy to use and they emphasized its importance in clinical practice. There is need for larger controlled, randomized studies with carefully selected and standardized outcome measures and patients.

Implant micromotion is related to peak insertion torque and bone density.

OBJECTIVES: Measuring peak insertion torque in relation to different bone densities, the present study seeks to determine whether micromotion at the interface is related to primary stability achieved by increasing insertion torque. MATERIAL AND METHODS: A total of 120 Ti-Bone implants were placed in fresh bovine bone samples representing three density categories: hard, normal and soft (HNS). Five groups of peak insertion torque (20, 35, 45, 70 and 100 N/cm) were evaluated in the three bone density categories noted. Customized electronic equipment connected to a PC was used to register the peak and other insertion torque data. A loading device, consisting of a digital force gauge and a digital micrometer, was used to measure the micromovements of the implant during the application of 20, 25 and 30 N lateral forces. The data were analyzed for statistical significance by ANOVA and Spearman's rank correlation coefficient tests. RESULTS: A statistically significant difference between implant micromobility placed with different levels of torque and in different bone densities was demonstrated by ANOVA. Spearman's rank correlation coefficient showed a high dependency between the peak insertion torque and the observed micromovement. Particularly, in soft bone, it was not possible to achieve more than 35 N/cm of peak insertion torque. CONCLUSIONS: Results showed that increasing the peak insertion torque reduces the level of implant micromotion. In addition, micromotion in soft bone was found to be consistently high, which could lead to the failure of osseointegration. Thus, immediate functional loading of implants in soft bone should be considered with caution.