A twisted carbonaceous nanotube as the air-electrode for flexible Zn-Air batteries.

Exploring electrocatalysts with high-efficiency oxygen reduction reaction (ORR) is significant for practical applications of fuel cells and metal-air batteries. In this work, a twisted core@shell material has been prepared with helical polypyrrole nanotubes (HPPys) as the core and coordination polymers (CPs) as the shell. After the pyrolysis process, a dense twisted carbon layer was formed by the reaction of CP and HPPy at its interface under Ar. The derived twisted carbonaceous nanotube exhibits good performance in both electrocatalytic ORR and OER. When used as the air-electrode in a flexible Zn-air battery, the battery shows good performance and stability.

Anchoring Fe Species on the Highly Curved Surface of S and N Co-Doped Carbonaceous Nanosprings for Oxygen Electrocatalysis and a Flexible Zinc-Air Battery.

Oxygen reduction reaction (ORR) is of critical significance in the advancement of fuel cells and zinc-air batteries. The iron-nitrogen (Fe-Nx ) sites exhibited exceptional reactivity towards ORR. However, the task of designing and controlling the local structure of Fe species for high ORR activity and stability remains a challenge. Herein, we have achieved successful immobilization of Fe species onto the highly curved surface of S, N co-doped carbonaceous nanosprings (denoted as FeNS/Fe3 C@CNS). The induction of this twisted configuration within FeNS/Fe3 C@CNS arose from the assembly of chiral templates. For electrocatalytic ORR tests, FeNS/Fe3 C@CNS exhibits a half-wave potential (E1/2 ) of 0.91 V in alkaline medium and a E1/2 of 0.78 V in acidic medium. The Fe single atoms and Fe3 C nanoparticles are coexistent and play as active centers within FeNS/Fe3 C@CNS. The highly curved surface, coupled with S substitution in the coordination layer, served to reduce the energy barrier for ORR, thereby enhancing the intrinsic catalytic activity of the Fe single-atom sites. We also assembled a wearable flexible Zn-air battery using FeNS/Fe3 C@CNS as electrocatalysts. This work provides new insights into the construction of highly curved surfaces within carbon materials, offering high electrocatalytic efficacy and remarkable performance for flexible energy conversion devices.

Helical Anatase Titanium Nanotubes through a Protected Crystallization Strategy for Enhanced Photocatalytic Performance.

Helical structure in catalysts has attracted attention and been recently investigated for various catalytic reactions. However, helical transition metal oxides suffer from uncontrollable crystallization processes at high temperatures when being transformed from an amorphous phase into a crystalline structure. Herein, we report a helical anatase TiO2 nanotube for the first time, which has been prepared using a protected crystallization strategy in the confined space of silica. A single chirality of helical TiO2 has been used to track the ordering of the twisted structure. The twisted structure in helical anatase TiO2 nanotube is maintained after a vigorous crystallization process. Helical anatase TiO2 nanotubes possess more accessible active sites and abundant defects of oxygen vacancy and Ti3+ species owing to the twisted structure. The obtained helical anatase TiO2 nanotube exhibits superior photocatalytic activity for hydrogen production without adding any co-catalysts. This work provides new insights into the role of helical structure in transition metal-based catalysts.

Electrocatalytic oxygen reduction with cobalt corroles bearing cationic substituents.

Recent decades have seen increasing interest in developing highly active and selective electrocatalysts for the oxygen reduction reaction (ORR). The active site environment of cytochrome c oxidases (CcOs), including electrostatic and hydrogen-bonding interactions, plays an important role in promoting the selective conversion of dioxygen to water. Herein, we report the synthesis of three CoIII corroles, namely 1 (with a 10-phenyl ortho-trimethylammonium cationic group), 2 (with a 10-phenyl ortho-dimethylamine group) and 3 (with a 10-phenyl para-trimethylammonium cationic group) as well as their electrocatalytic ORR activities in both acidic and neutral solutions. We discovered that 1 is much more active and selective than 2 and 3 for the electrocatalytic four-electron ORR. Importantly, 1 showed ORR activities with half-wave potentials at E1/2 = 0.75 V versus RHE in 0.5 M H2SO4 solutions and at E1/2 = 0.70 V versus RHE in neutral 0.1 M phosphate buffer solutions. This work is significant for outlining a strategy to increase both the activity and selectivity of metal corroles for the electrocatalytic ORR by introducing cationic units.

A helical polypyrrole nanotube interwoven zeolitic imidazolate framework and its derivative as an oxygen electrocatalyst.

A helical polypyrrole nanotube interwoven zeolitic imidazolate framework (ZIF) has been prepared for the first time. After pyrolysis, the helical carbon could act as highly active sites, while the 3D-connected nanoarchitecture contributed to fast charge transfer. The derived carbon material exhibits high activity for the ORR and good performance for a Zn-air battery.

The Role of Surface Curvature in Electrocatalysts.

Excessive consumption of fossil fuels has caused unavoidable environmental problems. The development of renewable and clean alternatives is essential for the sustainable and green development of human society. Electrocatalysts are most important parts in these energy-related devices. Recently, scientists found that the surface curvature of electrocatalysts could play an important role for the improvement of catalytic performance and the optimization of intrinsic catalytic activity during electrocatalytic process. The role of surface curvature in electrocatalysts is still under investigating. In this minireview, we summarized the latest progress of electrocatalysts with different surface curvatures and their applications in energy-related applications. This review mainly involves the strategies for preparation of electrocatalysts with different surface curvatures, three typical electrocatalysts with different surface curvatures (curled surface, onion-like structure, and spiral structure), and the potential mechanisms that surface curvature in electrocatalysts affects activities.