ABSTRACT
In polymer membrane fuel cells (PEMFC), the pore microstructure and the effective diffusion coefficient ( D eff ) of the catalytic layer have a significant impact on the overall performance of the fuel cell. In this work, numerical methods to simulate PEMFC catalytic layers were used to study the effect of isotropy ( I xy ) on the D eff . The proposed methodology studies reconstructed systems by Simulated Annealing imaging with different surface fractions of microstructures composed by two diffusive phases: agglomerates and pores. The D eff is determined numerically by the Finite Volume Method solved for Fick's First Law of Diffusion. The results show that the proposed methodology can effectively quantify the effect of isotropy on the D eff for both diffusion phases. Two trends were obtained in the magnitude of the D eff concerning the change in isotropy: (1) an analytical equation is proposed in this article for D eff ≥ 5 % D 0 and (2) numerical solutions are determined for D eff < 5 % D 0 . In our analytical equation are both a lineal and a logarithmic sweep. When the surface fraction is ∅ = 50%, the D eff decreases more linearly than ∅ = 10 % at the beginning of the isotropy change, which indicates that small changes in isotropy in the particulate material modify it drastically; under these conditions the diffusion coefficient in the pore is predominant. (3) When the surface fraction is less than 50%, the D eff decreases more exponentially at the beginning and more linearly at the end of the isotropy change, which shows that small isotropy changes in the bar-aligned material drastically alter it. In this trend, diffusion in the agglomerate is less affected by isotropy. The proposed methodology can be used as a design tool to improve the mass transport in porous PEMFC electrodes.