Effect of Atomic Layer Coating on the Stability of Solid Myoglobin Formulations.

The effects of atomic layer (ALC) coating on physical properties and storage stability were examined in solid powders containing myoglobin, a model protein. Powders containing myoglobin and mannitol (1:1 w/w) were prepared by lyophilization or spray drying and subjected to aluminum oxide or silicon oxide ALC coating. Uncoated samples of these powders as well as coated and uncoated samples of myoglobin as received served as controls. After preparation (t0), samples were analyzed for moisture content, reconstitution time, myoglobin secondary structure, crystallinity, and protein aggregate content. Samples were stored for 3 months (t3) under controlled conditions (53% RH, 40 °C) in both open and closed vials and then analyzed as above. At t3, the recovery of soluble native (i.e., monomeric) protein depended on formulation, coating type, and drying method and was up to 2-fold greater in coated samples than in uncoated controls. Promisingly, some samples with high recovery also showed low soluble aggregate content (<10%) at t3 and low total monomer loss; the latter was correlated to sample moisture content. Overall, the results demonstrate that ALC coatings can stabilize solid protein formulations during storage, providing benefits over uncoated controls.

Synthesis and self-assembly of curcumin-modified amphiphilic polymeric micelles with antibacterial activity.

BACKGROUND: The ubiquitous nature of bacterial biofilms combined with the enhanced resistance towards antimicrobials has led to the development of an increasing number of strategies for biofilm eradication. Such strategies must take into account the existence of extracellular polymeric substances, which obstruct the diffusion of antibiofilm agents and assists in the maintenance of a well-defended microbial community. Within this context, nanoparticles have been studied for their drug delivery efficacy and easily customised surface. Nevertheless, there usually is a requirement for nanocarriers to be used in association with an antimicrobial agent; the intrinsically antimicrobial nanoparticles are most often made of metals or metal oxides, which is not ideal from ecological and biomedical perspectives. Based on this, the use of polymeric micelles as nanocarriers is appealing as they can be easily prepared using biodegradable organic materials. RESULTS: In the present work, micelles comprised of poly(lactic-co-glycolic acid) and dextran are prepared and then functionalised with curcumin. The effect of the functionalisation in the micelle's physical properties was elucidated, and the antibacterial and antibiofilm activities were assessed for the prepared polymeric nanoparticles against Pseudomonas spp. cells and biofilms. It was found that the nanoparticles have good penetration into the biofilms, which resulted in enhanced antibacterial activity of the conjugated micelles when compared to free curcumin. Furthermore, the curcumin-functionalised micelles were efficient at disrupting mature biofilms and demonstrated antibacterial activity towards biofilm-embedded cells. CONCLUSION: Curcumin-functionalised poly(lactic-co-glycolic acid)-dextran micelles are novel nanostructures with an intrinsic antibacterial activity tested against two Pseudomonas spp. strains that have the potential to be further exploited to deliver a secondary bioactive molecule within its core.

Interactions between functionalised silica nanoparticles and Pseudomonas fluorescens biofilm matrix: A focus on the protein corona.

Biofilms are microbial communities embedded in an extracellular polymeric matrix and display an enhanced tolerance to the action of antimicrobials. The emergence of novel functionalised nanoparticles is considered a promising avenue for the development of biofilm-specific antimicrobial technologies. However, there is a gap in the understanding of interactions between nanoparticles and the biofilm matrix. Particularly, questions are raised on how nanoparticle charge and surface groups play a role in aggregation when in contact with biofilm components. Herein we present the synthesis of four types of silica nanoparticles and undertake an analysis of their interactions with Pseudomonas fluorescens biofilm matrix. The effect of the biofilm matrix components on the charge and aggregation of the nanoparticles was assessed. Additionally, the study focused on the role of matrix proteins, with the in-depth characterisation of the protein corona of each nanoparticle by Liquid Chromatography with Tandem Mass Spectrometry experiments. The protein corona composition is dependent on the nanoparticle type; non-functionalised nanoparticles show less protein selectivity, whereas carboxylate-functionalised nanoparticles prefer proteins with a higher isoelectric point. These outcomes provide insights into the field of biofilm-nanoparticle interactions that can be valuable for the design of new nano-based targeting systems in future anti-biofilm applications.

Enhancing curcumin's solubility and antibiofilm activity via silica surface modification.

Bacterial biofilms are microbial communities in which bacterial cells in sessile state are mechanically and chemically protected against foreign agents, thus enhancing antibiotic resistance. The delivery of active compounds to the inside of biofilms is often hindered due to the existence of the biofilm extracellular polymeric substances (EPS) and to the poor solubility of drugs and antibiotics. A possible strategy to overcome the EPS barrier is the incorporation of antimicrobial agents into a nanocarrier, able to penetrate the matrix and deliver the active substance to the cells. Here, we report the synthesis of antimicrobial curcumin-conjugated silica nanoparticles (curc-NPs) as a possibility for dealing with these issues. Curcumin is a known antimicrobial agent and to overcome its low solubility in water it was grafted onto the surface of silica nanoparticles, the latter functioning as nanocarrier for curcumin into the biofilm. Curc-NPs were able to impede the formation of model P. putida biofilms up to 50% and disrupt mature biofilms up to 54% at 2.5 mg mL-1. Cell viability of sessile cells in both cases was also considerably affected, which is not observed for curcumin delivered as a free compound at the same concentration. Furthermore, proteomics of extracted EPS matrix of biofilms grown in the presence of free curcumin and curc-NPs revealed differences in the expression of key proteins related to cell detoxification and energy production. Therefore, curc-NPs are presented here as an alternative for curcumin delivery that can be exploited not only to other bacterial strains but also to further biological applications.

Ratiometric Imaging of the in Situ pH Distribution of Biofilms by Use of Fluorescent Mesoporous Silica Nanosensors.

Biofilms are communities of microorganisms enclosed in a self-generated matrix of extracellular polymeric substances. While biofilm recalcitrance and persistence are caused by several factors, a reduction in antimicrobial susceptibility has been closely associated with the generation of pH gradients within the biofilm structure. Cells embedded within the biofilm create a localized acidic microenvironment, which is unaffected by the external pH. Therefore, pH monitoring is a promising approach for understanding the complexities of a three-dimensional heterogeneous biofilm. A fluorescent pH nanosensor was designed through the synthesis of mesoporous silica nanoparticles (47 ± 5 nm diameter) conjugated to a pH-sensitive dye (fluorescein) and a pH-insensitive dye (rhodamine B) as an internal standard (dye-MSNs). The fluorescence intensity of fluorescein (IF) reduced significantly as the pH was decreased from 8.5 to 3.5. In contrast, the fluorescence intensity of rhodamine B (IR) remained constant at any pH. The ratio of IF/IR produced a sigmoidal curve with respect to the pH, in a working pH range between 4.5 and 7.5. Dye-MSNs enabled the measurement of pH gradients within Pseudomonas fluorescens WCS 365 biofilm microcolonies. The biofilms showed spatially distinct low-pH regions that were enclosed into large clusters corresponding to high-cell-density areas. Also present were small low-pH areas that spread indistinctly throughout the microcolony caused by the mass transfer effect. The lowest detected pH within the inner core of the microcolonies was 5.1, gradually increasing to a neutral pH toward the exterior of the microcolonies. The dye-MSNs were able to fully penetrate the biofilm matrix and allowed a quantitative ratiometric analysis of pH gradients and distribution throughout the biofilm, which was independent of the nanoparticle concentration.

Synthesis of cyclodextrin polymers containing glutamic acid and their use for the synthesis of Ag nanoparticles.

Crosslinking and functionalizing agents play crucial roles in the properties/applications of cyclodextrin polymers. Here we report the synthesis of water-insoluble cyclodextrin polymers containing l-glutamic acid. In a first route, ß-cyclodextrin was crosslinked with citric acid and subsequently functionalized with l-glutamic acid, while a second route involved esterification of ß-cyclodextrin with l-glutamic acid, catalyzed by tin octoate. Combined evaluation by FTIR, 13C CP/MAS NMR and elemental analysis indicated that the sample from the first route had the largest fraction of glutamic acid. Sorption tests with methyl orange showed that the cyclodextrin cavities were slightly more available in the polymer obtained through the second route. Samples were employed as reductant and stabilizer for fast and easy synthesis of silver nanoparticles at room temperature. Brief UV irradiation was sufficient for samples produced by the first route.

Biogenic Nanosilver against Multidrug-Resistant Bacteria (MDRB).

Multidrug-resistant bacteria (MDRB) are extremely dangerous and bring a serious threat to health care systems as they can survive an attack from almost any drug. The bacteria's adaptive way of living with the use of antimicrobials and antibiotics caused them to modify and prevail in hostile conditions by creating resistance to known antibiotics or their combinations. The emergence of nanomaterials as new antimicrobials introduces a new paradigm for antibiotic use in various fields. For example, silver nanoparticles (AgNPs) are the oldest nanomaterial used for bactericide and bacteriostatic purposes. However, for just a few decades these have been produced in a biogenic or bio-based fashion. This review brings the latest reports on biogenic AgNPs in the combat against MDRB. Some antimicrobial mechanisms and possible silver resistance traits acquired by bacteria are also presented. Hopefully, novel AgNPs-containing products might be designed against MDR bacterial infections.

Development and characterisation of polymeric microparticle of poly(d,l-lactic acid) loaded with holmium acetylacetonate.

Biodegradable polymers containing radioactive isotopes such as Holmium 166 (166Ho) have potential applications as beta particle emitters in tumour tissues. It is also a gamma ray emitter, allowing nuclear imaging of any tissue to be acquired. It is frequently used in the form of complexes such as holmium acetylacetonate (HoAcAc), which may cause damages in tissues next to the targets cancer cells, as it is difficult to control its linkage or healthy tissues radiotherapy effects. Poly(d,l-lactic acid), PDLLA, was used to encapsulate holmium acetylacetonate (HoAcAc) using an emulsion solvent extraction/evaporation technique. Microspheres with sizes between 20-53 µm were extensively characterised. HoAcAc release from the microspheres was assessed through studies using Inductively Coupled Plasma - Optical Emission Spectroscopy, and the microspheres showed no holmium leakage after a period of 10 half-lives and following gamma irradiation. Thus, HoAcAc loaded microspheres are here presented as a potential system for brachytherapy and imaging purposes.

NMR insights on nano silver post-surgical treatment of superficial caseous lymphadenitis in small ruminants.

Caseous lymphadenitis (CL), caused by a pathogen of the second class of biosafety - Corynebacterium pseudotuberculosis, is a chronic and severe infectious disease that affects small ruminants and requires long, ineffective treatment which generally leads to animal sacrifice so as to stop the disease spreading. The infected animals suffer the excision of affected superficial lymph nodes and post-surgical treatment with iodine (10% solution in ethanol) and, sometimes, prolonged antibiotic use, but only if the sick animals are of great importance to breeding. Herein, we propose a cheap and easy to apply treatment of CL with excellent results using biogenic silver nanoparticles (AgNP) based technology. AgNP antibacterial properties were investigated in vitro against Corynebacterium pseudotuberculosis cells and in vivo on small ruminants with CL. Treatment of surgical wounds resulting from the excision of superficial CL lesions with a AgNP-based cream was compared to the standard post-surgical treatment method by iodine. Also, the effects of AgNP-based cream treatment were evaluated and compared with the effects of the iodine CL treatment by serum NMR-based metabolomics. Serum samples were collected from 29 animals, 9 sheep and 20 goats, during the treatments and analyzed. All animals showed stable serum metabolomes when iodine or AgNP-based cream effects were compared. The AgNP-based cream treatment showed excellent results, especially in accelerating the healing of wounds, which occurred two to three times faster in comparison with the iodine treatment. AgNP-based cream treatment also prevented CL reappearance and did not cause any side effects on animals. This is the first report on very effective post-surgical treatment of superficial CL in small ruminants based on biogenic silver nanoparticles, which might open up the possibility for a safe veterinary application of AgNP-based cream.