Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 5 de 5
Filter
Add more filters










Database
Language
Publication year range
1.
ACS Omega ; 9(19): 21187-21203, 2024 May 14.
Article in English | MEDLINE | ID: mdl-38764625

ABSTRACT

This study reports the fabrication and characterization of poly(vinyl alcohol) (PVA) and gelatin (Gel)-based nanofiber membranes cross-linked with citric acid (CA) by a green electrospinning method in which nano 45S5 bioglass (BG) and urea were incorporated. Various combinations of PVA, gelatin, and BG were prepared, and nanofiber membranes with average fiber diameters between 238 and 595 nm were fabricated. Morphological, chemical, and mechanical properties, porosity, swelling, water retention, and water vapor transmission rate of the fabricated membranes were evaluated. PVA:Gel (90:10), 15% CA, and 3% BG were determined as the optimum blend for nanofiber membrane fabrication via electrospinning. The membrane obtained using this blend was further functionalized with 10% w/w polymer urea coating by the electrospray method following the cross-linking. In vitro biocompatibility tests revealed that the fabricated membranes were all biocompatible except for the one that functionalized with urea. In vivo macroscopic and histopathological analysis results of PVA/Gel/BG and PVA/Gel/BG/Urea treated wounds indicated increased collagenization and vascularization and had an anti-inflammatory effect. Furthermore, careful examination of the in vivo macroscopic results of the PVA/Gel/BG/Urea membrane indicated its potential to decrease uneven scar formation. In conclusion, developed PVA/Gel/BG and PVA/Gel/BG/Urea electrospun membranes with multifunctional and biomimetic features may have the potential to be used as beneficial wound dressings.

2.
Biopolymers ; 114(10): e23562, 2023 Oct.
Article in English | MEDLINE | ID: mdl-37421643

ABSTRACT

Polymeric barrier membranes are used in periodontal applications to prevent fibroblastic cell migration into the cavities of bone tissue and to properly guide the proliferation of tissues. In this study, the fabrication, characterization, bioactivity, and in vitro biological properties of polyvinyl alcohol-based nanofibrous membranes containing nano-sized 45S5 bioactive glass (BG) loaded with chlorhexidine (CH) gluconate with biocompatible, bioactive, and antibacterial properties for using as dental barrier membranes were investigated. Nanofibrous membranes with an average fiber diameter, pore size, and porosity of 210 nm, 24.73 µm, and 12.42%, respectively, were loaded with 1% and 2% CH, and the release profile was investigated. The presence of BG in the membranes promoted fibroblastic proliferation and the presence of CH provided antibacterial properties. Nanofibrous membranes exhibit a high ability to restrict bacterial growth while fulfilling the necessary conditions for use as a dental barrier thanks to their low swelling rates, significant surface bioactivities, and appropriate degradation levels.


Subject(s)
Guided Tissue Regeneration , Nanofibers , Polyvinyl Alcohol/pharmacology , Chlorhexidine/pharmacology , Bone Regeneration , Anti-Bacterial Agents/pharmacology , Biocompatible Materials/pharmacology
3.
Int J Biol Macromol ; 192: 999-1012, 2021 Dec 01.
Article in English | MEDLINE | ID: mdl-34655587

ABSTRACT

In this study, designing of a stable electrospun blended chitosan (CS)-poly(vinyl alcohol) (PVA) nanofibers for colorimetric glucose biosensing in an aqueous medium was investigated. CS and PVA solutions were blended to acquire an optimum content (CS/PVA:1/4) and electrospunned to obtain uniform and bead-free CS/PVA nanofiber structures following the optimization of the electrospinning parameters (33 kV, 20 cm, and 1.2 ml.h-1). Crosslinking process applied subsequently provided mechanically and chemically stable nanofibers with an average diameter of 378 nm. The morphological homogeneity, high fluid absorption ability (>%50), thermal (<230 °C) and morphological stability, surface hydrophilicity and degrability properties of cross-linked CS/PVA nanofiber demonstrated their great potential to be developed as an eye-readable strip for biosensing applications. The glucose oxidase (GOx) and horseradish peroxidase (HRP) was immobilized by physical adsorption on the cross-linked CS/PVA nanofiber. The glucose assay analysis by ultraviolet-visible (UV-Vis) spectrophotometry using the same enzymatic system of the proposed glucose strips in form of absorbance versus concentration plot was found to be linear over a glucose concentration range of 2.7 to 13.8 mM. The prepared naked eye colorimetric glucose detection strips, with lower detection limit of 2.7 mM, demonstrated dramatic color change from white (0 mM) to brownish-orange (13.8 mM). The developed cross-linked CS/PVA nanofiber strips, prepared by electrospinnig procedure, could be easily adapted to a color map, as an alternative material for glucose sensing. Design of a practical, low-cost, and environmental-friendly bio-based CS/PVA testing strips for eye readable detection were presented and suggested as an applicable medium for a wide range of glucose concentrations.


Subject(s)
Biosensing Techniques , Chitosan/chemistry , Colorimetry/methods , Glucose/analysis , Nanofibers/chemistry , Polyvinyl Alcohol/chemistry , Chemical Phenomena , Enzymes, Immobilized , Glucose Oxidase/chemistry , Horseradish Peroxidase , Hydrogen-Ion Concentration , Nanofibers/ultrastructure , Nanotechnology , Spectrum Analysis
4.
Bioact Mater ; 5(1): 66-73, 2020 Mar.
Article in English | MEDLINE | ID: mdl-31989060

ABSTRACT

The objective of this study was to investigate the effect of magnesium (1 wt%) and aluminum (1 wt%) incorporation on the in vitro bioactivity and biodegradation behavior of 45S5 bioactive glasses synthesized from rice husk biogenic silica. The performance of biogenic silica-based samples was compared well with commercial silica-based counterparts. The in vitro biodegradation behavior of bioactive glasses was evaluated by the weight loss of samples and pH variation in the Tris buffer solution. Based on composition, bioglasses possessed different properties before and after simulated body fluid (SBF) immersion. The incorporation of magnesium (Mg) and aluminum (Al) enhanced the Vickers hardness of bioglasses. All the bioglasses showed the hydroxyapatite layer formation after SBF treatment as confirmed by the dissolution, FTIR, SEM and XRD analysis, however it was more prominent in the rice husk silica-based 45S5 bioglass. The biogenic silica seems to be a promising starting material for bioglass systems to be used in bone tissue engineering applications.

5.
Article in English | MEDLINE | ID: mdl-22279960

ABSTRACT

In the present study, the stabilizing effect of dextrans as additives on the denaturation and inactivation of glucose oxidase (GOD) was investigated. Three different molecular weighted dextrans (M(w) 17.5, 75, 188 kD) were used with different concentrations. Dramatically increased enzyme activities were measured after one hour of incubation of enzyme with additives between 25-40°C in water bath. Highest activity value was measured with 75 kDa molecular weighted dextran (in concentration 30% w/v) at pH 5. Dextran as an additive supplied a long shelf-life to the enzyme at 4°C. In the presence of the 75 kDa dextran, the enzyme was more stable and its activity was increased 2.7-fold at 30°C. In addition, dextran protected GOD against inactivation by a n-heptane/aqueous buffer-stirred system.


Subject(s)
Dextrans/pharmacology , Glucose Oxidase/chemistry , Glucose Oxidase/metabolism , Protein Denaturation/drug effects , Aspergillus niger/enzymology , Buffers , Dextrans/chemistry , Dose-Response Relationship, Drug , Enzyme Activation/drug effects , Molecular Weight , Plasma Substitutes/chemistry , Plasma Substitutes/pharmacology , Temperature , Time Factors
SELECTION OF CITATIONS
SEARCH DETAIL
...