ABSTRACT
Placental structure is linked to function across morphological scales. In the placenta, changes to gross anatomy, such as surface area, volume, or blood vessel arrangement, are associated with suboptimal physiological outcomes. However, quantifying each of these metrics requires different laborious semi-quantitative methods. Here, we demonstrate how, with minimal sample preparation, whole-organ computed microtomography (microCT) can be used to calculate gross morphometry of the equine placenta and a range of additional metrics, including branching morphometry of placental vasculature, non-destructively from a single dataset. Our approach can be applied to quantify the gross structure of any large mammalian placenta.
ABSTRACT
Mammalian placentas exhibit unparalleled structural diversity, despite sharing a common ancestor and principal functions. The bulk of structural studies in placental research has used two-dimensional (2D) histology sectioning, allowing significant advances in our understanding of mammalian placental structure. However, 2D histology sectioning may be limited if it does not provide accurate information of three-dimensional (3D) tissue architecture. Here, we propose correlative 3D X-ray histology (3D-XRH) as a tool with great potential for resolving mammalian placental structures. 3D-XRH involves scanning a formaldehyde-fixed, paraffin embedded (FFPE) tissue block with 3D X-ray microscopy (microCT) prior to histological sectioning to generate a 3D image volume of the embedded tissue piece. The subsequent 2D histology sections can then be correlated back into the microCT image volume to couple histology staining (or immunolabelling) with 3D tissue architecture. 3D-XRH is non-destructive and requires no additional sample preparation than standard FFPE histology sectioning, however the image volume provides 3D morphometric data and can be used to guide microtomy. As such, 3D-XRH introduces additional information to standard histological workflows with minimal effort or disruption. Using primary examples from porcine, bovine, equine, and canine placental samples, we demonstrate the application of 3D-XRH to quantifying placental structure as well as discussing the limitations and future directions of the methodology. The wealth of information derived from 2D histological sectioning in the biomedical, veterinary, and comparative reproductive sciences provides a rich foundation from which 3D-XRH can build on to advance the study of placental structure and function.
ABSTRACT
The skeletons of long-lived bamboo coral (Family Keratoisididae) are promising archives for deep-water palaeoceanographic reconstructions as they can record environmental variation at sub-decadal resolution in locations where in-situ measurements lack temporal coverage. Yet, detailed three dimensional (3D) characterisations of bamboo coral skeletal architecture are not routinely available and non-destructive investigations into microscale variations in calcification are rare. Here, we provide high-resolution micro-focus computed tomography (µCT) data of skeletal density for two species of bamboo coral (Acanella arbuscula: 5 specimens, voxel size, 15 µm (central branch scans) and 50 µm (complete structure scan); Keratoisis sp.: 4 specimens, voxel size, 15 µm) collected from the Labrador Sea and Baffin Bay deep-water basins, Eastern Canadian Arctic. These data provide reference models useful for developing methods to assess structural integrity and other fine-scale complexities in many biological, geological, and industrial systems. This will be of wider value to those investigating structural composition, arrangement and/or composition of complex architecture within the fields and subdisciplines of biology, ecology, medicine, environmental geology, and structural engineering.
Subject(s)
Anthozoa , Animals , X-Ray Microtomography , Imaging, Three-Dimensional , CanadaABSTRACT
Despite having a single evolutionary origin and conserved function, the mammalian placenta exhibits radical structural diversity. The evolutionary drivers and functional consequences of placental structural diversity are poorly understood. Humans and equids both display treelike placental villi, however these villi evolved independently and exhibit starkly different levels of invasiveness into maternal tissue (i.e. the number of maternal tissue layers between placental tissue and maternal blood). The villi in these species therefore serve as a compelling evolutionary case study to explore whether placentas have developed structural adaptations to respond to the challenge of reduced nutrient availability in less invasive placentas. Here, we use three-dimensional X-ray microfocus computed tomography and electron microscopy to quantitatively evaluate key structures involved in exchange in human and equid placental villi. We find that equid villi have a higher surface area to volume ratio and deeper trophoblastic vessel indentation than human villi. Using illustrative computational models, we propose that these structural adaptations have evolved in equids to boost nutrient transfer to compensate for reduced invasiveness into maternal tissue. We discuss these findings in relation to the 'maternal-fetal conflict hypothesis' of placental evolution.
Subject(s)
Chorionic Villi , Placenta , Animals , Pregnancy , Female , Humans , MammalsABSTRACT
Background: The University of Southampton, in collaboration with the University Hospital Southampton (UHS) NHS Foundation Trust and industrial partners, has been at the forefront of developing three-dimensional (3D) imaging workflows using X-ray microfocus computed tomography (µCT) -based technology. This article presents the outcomes of these endeavours and highlights the distinctive characteristics of a µCT facility tailored explicitly for 3D X-ray Histology, with a primary focus on applications in biomedical research and preclinical and clinical studies. Methods: The UHS houses a unique 3D X-ray Histology (XRH) facility, offering a range of services to national and international clients. The facility employs specialised µCT equipment explicitly designed for histology applications, allowing whole-block XRH imaging of formalin-fixed and paraffin-embedded tissue specimens. It also enables correlative imaging by combining µCT imaging with other microscopy techniques, such as immunohistochemistry (IHC) and serial block-face scanning electron microscopy, as well as data visualisation, image quantification, and bespoke analysis. Results: Over the past seven years, the XRH facility has successfully completed over 120 projects in collaboration with researchers from 60 affiliations, resulting in numerous published manuscripts and conference proceedings. The facility has streamlined the µCT imaging process, improving productivity and enabling efficient acquisition of 3D datasets. Discussion & Conclusions: The 3D X-ray Histology (XRH) facility at UHS is a pioneering platform in the field of histology and biomedical imaging. To the best of our knowledge, it stands out as the world's first dedicated XRH facility, encompassing every aspect of the imaging process, from user support to data generation, analysis, training, archiving, and metadata generation. This article serves as a comprehensive guide for establishing similar XRH facilities, covering key aspects of facility setup and operation. Researchers and institutions interested in developing state-of-the-art histology and imaging facilities can utilise this resource to explore new frontiers in their research and discoveries.
ABSTRACT
Particulate Matter (PM) low-cost sensors (LCS) present a cost-effective opportunity to improve the spatiotemporal resolution of airborne PM data. Previous studies focused on PM-LCS-reported hourly data and identified, without fully addressing, their limitations. However, PM-LCS provide measurements at finer temporal resolutions. Furthermore, government bodies have developed certifications to accompany new uses of these sensors, but these certifications have shortcomings. To address these knowledge gaps, PM-LCS of two models, 8 Sensirion SPS30 and 8 Plantower PMS5003, were collocated for one year with a Fidas 200S, MCERTS-certified PM monitor and were characterised at 2 min resolution, enabling replication of certification processes, and highlighting their limitations and improvements. Robust linear models using sensor-reported particle number concentrations and relative humidity, coupled with 2-week biannual calibration campaigns, achieved reference-grade performance, at median PM2.5 background concentration of 5.5 µg/m3, demonstrating that, with careful calibration, PM-LCS may cost-effectively supplement reference equipment in multi-nodes networks with fine spatiotemporality.
ABSTRACT
An amendment to this paper has been published and can be accessed via a link at the top of the paper.
ABSTRACT
LoRaWAN is a Low-PowerWide Area Network (LPWAN) technology designed for Internetof Things (IoT) deployments; this paper presents experiences from deploying a city-scale network across Southampton, UK. This network was deployed to support an installation of air quality monitors and to explore the capabilities of . This deployment uses a mixture of commercial off-the-shelf gateways and custom gateways. These gateway locations were chosen based on network access, site permission and accessibility, and are not necessarily the best locations theoretically. Over 135,000 messages have been transmitted by the twenty devices analysed. Over the course of the complete deployment, 72 . 4 of the messages were successfully received by the data server. Of the messages that were received, 99 were received within 10 s of transmission. We conclude that is an applicable communication technology for city-scale air quality monitoring and other smart city applications.
ABSTRACT
Exposure to ambient particulate matter (PM) air pollution is a leading risk factor for morbidity and mortality, associated with up to 8.9 million deaths/year worldwide. Measurement of personal exposure to PM is hindered by poor spatial resolution of monitoring networks. Low-cost PM sensors may improve monitoring resolution in a cost-effective manner but there are doubts regarding data reliability. PM sensor boxes were constructed using four low-cost PM micro-sensor models. Three boxes were deployed at each of two schools in Southampton, UK, for around one year and sensor performance was analysed. Comparison of sensor readings with a nearby background station showed moderate to good correlation (0.61 < r < 0.88, p < 0.0001), but indicated that low-cost sensor performance varies with different PM sources and background concentrations, and to a lesser extent relative humidity and temperature. This may have implications for their potential use in different locations. Data also indicates that these sensors can track short-lived events of pollution, especially in conjunction with wind data. We conclude that, with appropriate consideration of potential confounding factors, low-cost PM sensors may be suitable for PM monitoring where reference-standard equipment is not available or feasible, and that they may be useful in studying spatially localised airborne PM concentrations.
ABSTRACT
Fluctuations in glacier motion are very common and are thought to be controlled by subglacial hydrology and till deformation. There are few instrumented studies that have monitored seasonal changes. We use the innovative Glacsweb subglacial in situ wireless probes, combined with dGPS and custom geophone data from an Icelandic soft-bedded temperate glacier, to show that there are two distinct seasonal styles of speed-up events. Relatively small diurnal events occur during the melt season, whilst during winter there are larger multi-day events related to positive degree days. These events are accompanied by a distinct pattern of till deformation and basal icequakes. We argue these reflect stick-slip motion which occurs when the glacier hydrological system is unable to accommodate the melt water flux generated by surface melt episodes. We show a rare fully instrumented coupled glacier/till record of contrasting summer and winter stick-slip motion and discuss its implication for till sedimentology.
ABSTRACT
Air Quality (AQ) is a very topical issue for many cities and has a direct impact on citizen health. The AQ of a large UK city is being investigated using low-cost Particulate Matter (PM) sensors, and the results obtained by these sensors have been compared with government operated AQ stations. In the first pilot deployment, six AQ Internet of Things (IoT) devices have been designed and built, each with four different low-cost PM sensors, and they have been deployed at two locations within the city. These devices are equipped with LoRaWAN wireless network transceivers to test city scale Low-Power Wide Area Network (LPWAN) coverage. The study concludes that (i) the physical device developed can operate at a city scale; (ii) some low-cost PM sensors are viable for monitoring AQ and for detecting PM trends; (iii) LoRaWAN is suitable for city scale sensor coverage where connectivity is an issue. Based on the findings from this first pilot project, a larger LoRaWAN enabled AQ sensor network is being deployed across the city of Southampton in the UK.