ABSTRACT
This study examined the effects of spread formulation and the structural/lubricant properties of six different commercial hazelnut and cocoa spreads on sensory perception. Rheology, tribology, and quantitative descriptive analysis (QDA) was assessed by also evaluating the correlation coefficients between the quality descriptor and the rheological and textural parameters. The viscosity was evaluated at different temperatures to better simulate conditions before and after ingestion. Tribological analysis was executed at 37°C to mimic the human oral cavity. The effect of saliva presence and the number of runs on tribological behaviors was investigated. Moreover, textural, calorimetric, and particle size distribution measurements were performed to reinforce the correlation between structural/thermal parameters (e.g., firmness, stickiness, sugar melting point) and sensory aspects. "Visual viscosity," defined as a sensory attribute evaluated prior to consumption, negatively correlated with apparent viscosity measured at 20°C and 10 s-1, whereas "body," defined during oral processing and related to creaminess, positively correlated with apparent viscosity measured at 37°C and 50 s-1. These attributes were mainly influenced by particulate microstructure and solid volume fraction within the formulation. Textural stickiness positively correlated with sensory "adhesiveness" and was related to fat composition and milk powder addition, while "sweetness" was related to sucrose content and sugar melting enthalpy. Tribological data provided meaningful information related to particle-derived attributes, as well as after-coating perception (fattiness/oiliness), thus better predicting food evolution during oral consumption.
Subject(s)
Cacao , Corylus , Rheology , Taste , Humans , Viscosity , Cacao/chemistry , Mouth/physiology , Particle Size , Adult , Female , Male , Saliva/chemistry , Young AdultABSTRACT
A commercial olive leaf extract (OL), effective against Salmonella enterica, Escherichia coli, Listeria monocytogenes, and Staphylococcus aureus, was added to three different coating formulations (methylcellulose, MC; chitosan, CT; and alginate, ALG) to produce active polylactic acid (PLA) coated films. Evaluation of these coated PLA films revealed significant inhibition of S. aureus growth, particularly with the MC and CT formulations exhibiting the highest inhibition rates (99.7%). The coated films were then tested for food contact compatibility with three food simulants (A: 10% ethanol; B: 3% acetic acid; D2: olive oil), selected to assess their suitability for pre-cut hams and ready-to-eat vegetables in relation to overall migration. However, coated films with active functions exhibited migration values in simulants A and B above legal limits, while promising results were obtained for simulant D2, highlighting the need to deeply investigate these coatings' impact on a real food system. Untargeted metabolomics revealed that the type of coating influenced the selective release of certain phenolic classes based on the food simulant tested. The Oxitest analysis of simulant D2 demonstrated that the MC and ALG-coated PLA films slightly slowed down the oxidation of this food simulant, which is an edible vegetable oil.
ABSTRACT
Commercial cocoa and hazelnut-based sweet spreads typically present a poor nutribiochemical level due to their ingredients and recipes, while nowadays, there is the need of developing sustainable food products addressing both an improved nutritional and environmental profile. The aim of this work was then to develop an innovative hazelnut/carob-based spread with potential high sustainability and nutritional profile, including the exploitation of grape-processing residues (grape skin flour and grapeseed oil) and carob pulp as cocoa surrogate. Rheological (rotational/oscillatory), oxidative, and thermal features of the spread were assessed and compared with two commercial nut-cocoa-based products. Tribology was used to mimic and evaluate the spreads' behavior during oral consumption, and sensory profile (by quantitative descriptive analysis) was also assessed. All products exhibited a pseudoplastic behavior, with the elastic component prevailing over the viscous one. The innovative product showed the highest lubricity from both rheological and sensory analysis, thus well correlating to the obtained lowest viscosity and friction factor trends. Grapeseed oil provided a better nutritional profile, but the largest amount of unsaturated fatty acids promoted oxidation, despite the higher total phenolic content and antioxidant capacity coming from the use of carob and grape skin powders. The sensory perception investigation revealed a characteristic mouthfeel/flavor for the new spread identified having a more fluid consistency and a bitter/sour taste, together with a greater stickiness and a poorer smoothness due to a higher fiber content and solid fat absence.
ABSTRACT
Bio-based polymers are increasingly attracting attention as a solution to reducing the consumption of non-renewable resources and curbing the accumulation of fossil-based plastic waste. In this study, we analyze the economics of a new packaging film based on a polylactic acid-polyhydroxybutyrate blend (PLA-PHB), with PHB obtained from agro-industrial residues (potato peels). We model various sizes of biorefineries using the new biotechnology in Europe. For a four-year payback period, which is generally accepted in the industry, the calculated minimum product selling price ranges from 9.7 euros per kilogram to 37.2 euros per kilogram, depending, among other factors, on the production capacity of the biorefinery. We have incorporated the uncertainty over the model parameters in a Monte Carlo simulation and investigated the relative impact of individual factors on the minimum product selling price. Overall, the results indicate that the bio-based feedstock availability is the most influential factor on the profitability of the new biotechnology.
Subject(s)
Food Packaging , Refuse Disposal , Food , Cost-Benefit Analysis , BiotechnologyABSTRACT
Five commercial hazelnut/cocoa spreads with different compositions were tested by rheology/tribology. The impact of each formulation on the structural/lubricant performances was investigated. Rotational/oscillatory rheology was chosen to assess material behavior during flow. Viscosity variation as a function of temperature and chamber geometry was evaluated. Oscillatory mode tests were carried out to obtain information on product viscoelasticity. Tribological analysis was performed at different temperatures aiming at simulating the chewing/swallowing process. All samples were categorized as pseudo-plastic and viscoelastic materials, with the elastic component prevailing over the viscous one. Major differences were detected in terms of consistency index, depending on the total lipid content. Temperature increase enhanced spread fluidity with a decreasing viscosity according to the Arrhenius model (R2 > 0.942) and greater values of activation energy reflecting higher sensitivity to microstructural changes. An inverse relationship between Casson viscosity ηc and sugar/fat ratio highlighted additional correlations between structural parameters and spread formulation. Tribological measurements at 25°C highlighted that, at the initial eating stage, the friction factor (0.112-0.262 at sliding velocity of 8 × 10-6 m/s) was strongly affected by either the amounts of solid fat or hazelnut percentage. Tribological data corroborated the theory for which tribology and rheology cover different domains.
Subject(s)
Corylus , Friction , Rheology , Temperature , ViscosityABSTRACT
Recovery of bioactive compounds from biowaste is gaining more and more interest in circular economy models. The oilseed cakes are usually insufficiently exploited by most technologies since they represent valuable matrices abundant in proteins, minerals, and phytochemicals, but their use is mostly limited to feed ingredients, fertilizers or biofuel production. This study was thus focused on the exploration of new valorization pathways of oilseed cakes by subcritical water, representing a safe and economic alternative in the creation of value chains. Pumpkin, hemp, and flax seed cakes were treated with subcritical water in nitrogen and carbon-dioxide atmospheres, as well as in nitrogen atmosphere with the addition of acid catalyst. The degradation of carbohydrate fraction was studied by quantifying sugars and sugar degradation products in the obtained extracts. The extracts obtained under different conditions were further compared chemically with respect to total phenols and flavonoids, as well as to the content of individual phenolic compounds. Furthermore, the effects of subcritical water treatment conditions on antioxidant, antiradical and cytotoxic properties of thus obtained extracts were defined and discussed.
ABSTRACT
In this work, extra-virgin olive oil (EVO)- and sunflower oil (SFO)-based oleogels were structured using rice bran wax (RBW) at 10% by weight (w/w). Bamboo fiber milled with 40 (BF40), 90 (BF90) and 150 (BF150) µm of average size was added as a structuring agent. The effect of fiber addition and cooling temperature (0, 4, and 25 °C) on thermal and structural parameters of achieved gels was assessed by rheological (both in rotational and oscillatory mode), texture, and differential scanning calorimetry tests. Oleogelation modified the rheological behavior of EVO and SFO, thus shifting from a Newtonian trend typical of oils to a pseudoplastic non-Newtonian behavior in gels. Moreover, oleogels behaved as solid-like systems with G' > Gâ³, regardless of the applied condition. All samples exhibit a thermal-reversible behavior, even though the presence of hysteresis suggests a partial reduction in structural properties under stress. Decreasing in cooling temperature negatively contributed to network formation, despite being partially recovered by low-granulometry fiber addition. The latter dramatically improved either textural, rheological, or stability parameters of gels, as compared with only edible oil-based systems. Finally, wax/gel compatibility affected the crystallization enthalpy and final product stability (gel strength) due to different gelator-gelator and gelator-solvent interactions.
ABSTRACT
Gluten-free (GF) pasta samples containing rice flour replaced with 0, 5, 10, 15 g/100 g (w/w) of a resistant starch ingredient from annealed sorghum starch (annRS) were formulated. The highest total dietary fiber and RS contents (p < 0.05) were measured in uncooked pasta with 15 g/100 g of annRS addition (15-annRS). After cooking, the 15-annRS pasta was characterized by an RS content of 5.8 g/100 g dry matter, confirming the thermal resistance of annRS. The use of annRS positively influenced the optimal cooking time, the cooking loss, the firmness, and the stickiness of the cooked samples, with not remarkably change in color after cooking. The starch hydrolysis index values decreased as the level of annRS increased. Despite a significant decrease in the overall sensory with increasing levels of annRS, all samples were characterized by a value > 5, which is considered the limit of acceptability. The use of annRS in GF pasta up to 15 g/100 g can contribute to creating GF products with high total dietary fiber content, slowly digestible starch properties, and without drastically compromising the sensory attributes.
ABSTRACT
The thermal stability of four different commercial citrus peel extracts was tested and improved by an encapsulation process with ß-cyclodextrins in a spray-dryer. All extracts after the encapsulation process maintained a good antioxidant capacity, with an apparent loss in total phenolic compounds of around 20-25%. In addition, all samples showed good antimicrobial activity (MIC 5-0.625 mg/mL) against Staphylococcus aureus, which was maintained after the encapsulation process (MIC 5-1.25 mg/mL). Based on the antioxidant and antimicrobial activity results, the best-encapsulated citrus extract was selected for incorporation into a polylactic acid/polyhydroxy butyrate (PLA/PHB) film. The latter was then produced on an industrial scale by cast extrusion and was found to be suitable for food contact as it showed overall migration values in different food simulants lower than the legislative limit of 10 mg of non-volatile substances per 1 dm2 of surface area. The UHPLC-HRMS analysis, performed to evaluate the migration of the active compounds, revealed about 13.41% release in food simulant A and 11.02% in food simulant B. Antimicrobial analysis conducted directly on the film showed a growth inhibition activity towards Escherichia coli and Staphylococcus aureus equal to 30 and 60%, respectively.
ABSTRACT
Mechanical vibration in the Terahertz range is believed to be connected with protein functions. In this paper, we present the results of a normal-mode analysis (modal analysis) of a Na/K-ATPase all-atom model, focusing the attention on low-frequency vibration modes. The numerical model helps in the interpretation of experimental results previously obtained by the authors via Raman spectroscopy of Na/K-ATPase samples, where several unassigned peaks were found in the sub-500 cm-1 range. In particular, vibration modes corresponding to peaks at 27, 190 and 300 cm-1, found experimentally, are confirmed here numerically, together with some other modes at lower frequencies (wavenumbers) that were not possible to observe in the experimental test. All the aforementioned modes correspond to vibrations involving the protein ends, i.e. portions directly related to the operating mechanism of the sodium-potassium pump.