Self-powered ultrasensitive and highly stretchable temperature-strain sensing composite yarns.

With the emergence of stretchable/wearable devices, functions, such as sensing, energy storage/harvesting, and electrical conduction, should ideally be carried out by a single material, while retaining its ability to withstand large elastic deformations, to create compact, functionally-integrated and autonomous systems. A new class of trimodal, stretchable yarn-based transducer formed by coating commercially available Lycra® yarns with PEDOT:PSS is presented. The material developed can sense strain (first mode), and temperature (second mode) and can power itself thermoelectrically (third mode), eliminating the need for an external power-supply. The yarns were extensively characterized and obtained an ultrahigh (gauge factor ∼3.6 × 105, at 10-20% strain) and tunable (up to about 2 orders of magnitude) strain sensitivity together with a very high strain-at-break point (up to ∼1000%). These PEDOT:PSS-Lycra yarns also exhibited stable thermoelectric behavior (Seebeck coefficient of 15 µV K-1), which was exploited both for temperature sensing and self-powering (∼0.5 µW, for a 10-couple module at ΔT ∼ 95 K). The produced material has potential to be interfaced with microcontroller-based systems to create internet-enabled, internet-of-things type devices in a variety of form factors.

Fabrication of cm scale buckypapers of horizontally aligned multiwalled carbon nanotubes highly filled with Fe3C: the key roles of Cl and Ar-flow rates.

A key challenge in the fabrication of ferromagnetically filled carbon-nanotube buckypapers in the presence of Cl-radicals is the achievement of a preferential horizontal nanotube-alignment. We show that a horizontal-alignment can be achieved by tuning two main CVD parameters for a fixed dichlorobenzene concentration: the precursor-evaporation temperature and the flow rate.

Boundary layer chemical vapour synthesis of self-organised ferromagnetically filled radial-carbon-nanotube structures.

Boundary layer chemical vapour synthesis is a new technique that exploits random fluctuations in the viscous boundary layer between a laminar flow of pyrolysed metallocene vapour and a rough substrate to yield ferromagnetically filled radial-carbon-nanotube structures departing from a core agglomeration of spherical nanocrystals individually encapsulated by graphitic shells. The fluctuations create the thermodynamic conditions for the formation of the central agglomeration in the vapour which subsequently defines the spherically symmetric diffusion gradient that initiates the radial growth. The radial growth is driven by the supply of vapour feedstock by local diffusion gradients created by endothermic graphitic-carbon formation at the vapour-facing tips of the individual nanotubes and is halted by contact with the isothermal substrate. The radial structures are the dominant product and the reaction conditions are self-sustaining. Ferrocene pyrolysis yields three common components in the nanowire encapsulated by multiwall carbon nanotubes, Fe3C, α-Fe, and γ-Fe. Magnetic tuning in this system can be achieved through the magnetocrystalline and shape anisotropies of the encapsulated nanowire. Here we demonstrate proof that alloying of the encapsulated nanowire is an additional approach to tuning of the magnetic properties of these structures by synthesis of radial-carbon-nanotube structures with γ-FeNi encapsulated nanowires.

The origin of long-period lattice spacings observed in iron-carbide nanowires encapsulated by multiwall carbon nanotubes.

Structures comprising single-crystal, iron-carbon-based nanowires encapsulated by multiwall carbon nanotubes self-organize on inert substrates exposed to the products of ferrocene pyrolysis at high temperature. The most commonly observed encapsulated phases are Fe3C, α-Fe, and γ-Fe. The observation of anomalously long-period lattice spacings in these nanowires has caused confusion since reflections from lattice spacings of ≥ 0.4 nm are kinematically forbidden for Fe3C, most of the rarely observed, less stable carbides, α-Fe, and g-Fe. Through high-resolution electron microscopy, selective area electron diffraction, and electron energy loss spectroscopy we demonstrate that the observed long-period lattice spacings of 0.49, 0.66, and 0.44 nm correspond to reflections from the (100), (010), and (001) planes of orthorhombic Fe3C (space group Pnma). Observation of these forbidden reflections results from dynamic scattering of the incident beam as first observed in bulk Fe3C crystals.With small amounts of beam tilt these reflections can have significant intensities for crystals containing glide planes such as Fe3C with space groups Pnma or Pbmn.

High electrical conductance enhancement in Au-nanoparticle decorated sparse single-wall carbon nanotube networks.

We report high electrical conductance enhancement in sparse single-walled carbon nanotube networks by decoration with Au nanoparticles. The optimized hybrid network exhibited a sheet resistance of 650 Ω sq(-1), 1/1500 of the resistance of the host undecorated network, with a negligible optical transmission penalty (>90% transmittance at 550 nm wavelength). The electrical transport at room temperature in the host and decorated networks was dominated by two-dimensional variable range hopping. The high conductance enhancement was due to positive charge transfer from the decorating Au nanoparticles in intimate contact with the host network causing a Fermi energy shift into the high density of states at a van Hove singularity and enhanced electron delocalization relative to the host network which beneficially modifies the hopping parameters in such a way that the network behaves as an integral whole. The effect is most pronounced when the nanoparticle diameter is comparable to the electron mean free path in the bulk material at room temperature and there is minimum nanoparticle agglomeration. For higher than optimal values of nanoparticle coverage or nanoparticle diameter, the conductance enhancement is countered by metallic inclusions in the current pathways that are of higher resistance than the variable range hopping-controlled elements.

Flow linear dichroism to probe binding of aromatic molecules and DNA to single-walled carbon nanotubes.

Structures of carbon nanotube/ligand complexes were studied by flow linear dichroism (the differential absorption of light polarized parallel and perpendicular to the flow orientation direction) with the aim of establishing linear dichroism as a technique to study such systems. Anthracene, naphthalene, and DNA were chosen as ligands, and the potential for flow linear dichroism to probe ligands noncovalently (as well as covalently) bound to single-walled nanotubes is reported. Linear dichroism enables the determination of approximate orientations of the ligands on the carbon nanotubes.