ABSTRACT
To determine the angiotensin-I converting enzyme (ACE) inhibitory activity of marine cryptides, different methods were tested. ACE inhibition was measured using two synthetic substrates, (N-[3-(2-furyl) acryloyl]-Phe-Gly-Gly (FAPGG) and N-hippuryl-His-Leu hydrate salt (HHL)), and a natural one, angiotensin-I. The IC50 value (defined as the concentration of inhibitory molecule needed to inhibit 50% of the ACE activity) of the reference synthetic inhibitor captopril was in the nanomolar range (1.79-15.1 nM) when synthetic substrates were used, whereas it exhibited IC50 of micromolar range (16.71 µM) with angiotensin-I. We chose losartan, an antagonist of angiotensin-II receptor as negative control for the ACE inhibition. Losartan was also able to inhibit ACE whatever the substrate tested, with IC50 of micromolar range (17.13-146 µM). We defined this value as a limit above which molecules are not showing in vitro ACE inhibitory activity. Val-Trp (VW), Val-Tyr (VY), Lys-Tyr (KY), Lys-Trp (KW), Ile-Tyr (IY), Ala-Pro (AP), Val-Ile-Tyr (VIY), Leu-Lys-Pro (LKP), Gly-Pro-Leu (GPL), Ala-Lys-Lys (AKK), and Val-Ala-Pro (VAP) were tested as inhibitors of ACE with synthetic and natural substrates. IC50 displayed were substrate-dependent. With FAPGG as substrate, IW, VAP, KY, IY, AP, AKK, and VIY show IC50 values over the IC50 value of losartan and should not be considered as inhibitors of ACE. VY, VW, KW, and LKP exhibited IC50 value lower than the IC50 value of losartan for all substrates tested and were thus considered as good candidates for effectively decreasing hypertension. It appears that the comparison of IC50 is not consistent when IC50 values are obtained with different substrates and different methods. In vitro ACE inhibitory activity assays should always include various ACE substrates and references such as captopril and a negative control to obtain data reliable to discriminate ACE inhibitory peptides.
