Flavouring group evaluation 419 (FGE.419): 2-methyl-1-(2-(5-(p-tolyl)-1H-imidazol-2-yl)piperidin-1-yl)butan-1-one.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of 2-methyl-1-(2-(5-(p-tolyl)-1H-imidazol-2-yl)piperidin-1-yl)butan-1-one [FL-no: 16.134] as a new flavouring substance, in accordance with Regulation (EC) No 1331/2008. The substance has not been reported to occur naturally and is chemically synthesised. In food, it is intended to be used as a flavouring substance only in chewing gum. The chronic dietary exposure to [FL-no: 16.134] was estimated to be 45 µg/person per day for a 60-kg adult and 28.4 µg/person per day for a 15-kg 3-year-old child. [FL-no: 16.134] did not show genotoxicity in a bacterial reverse mutation test and an in vitro mammalian cell micronucleus assay. Based on the submitted toxicokinetic and metabolism data, it can be predicted that the flavouring substance is metabolised to innocuous products only. The Panel derived a lower confidence limit of the benchmark dose (BMDL) of 0.71 mg/kg bw per day for a 20% increase in the relative thyroid (including parathyroid) weight observed in a 90-day toxicity study in rats. Based on this BMDL, adequate margins of exposure of 887 and 374 could be calculated for adults and children, respectively. The Panel concluded that there is no safety concern for [FL-no: 16.134], when used as a flavouring substance at the estimated level of dietary exposure, based on the intended use and use levels as specified in Appendix B. The Panel further concluded that the combined exposure to [FL-no: 16.134] from its use as a food flavouring substance and from its presence in toothpaste and mouthwash is also not of safety concern.

Flavouring Group Evaluation 413 (FGE.413): Naringenin.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of naringenin [FL-no: 16.132] as a new flavouring substance, in accordance with Regulation (EC) No 1331/2008. No other substances with sufficient structural similarity have been identified in existing FGEs that could be used to support a read-across approach. The information provided on the manufacturing process, the composition and the stability of [FL-no: 16.132] was considered sufficient. From studies carried out with naringenin, the Panel concluded that there is no concern with respect to genotoxicity. The use of naringenin as a flavouring substance at added portions exposure technique (APET) exposure levels is unlikely to pose a risk for drug interaction. For the toxicological evaluation of naringenin, the Panel requested an extended one-generation toxicity study on naringenin, in line with the requirements of the Procedure and to investigate the consequence of a possible endocrine-disrupting activity. The Panel considered that changes in thymus weight, litter size, post-implantation loss and a consistent reduced pup weight in the high-dose F2 generation could not be dismissed and selected therefore, the mid-dose of 1320 mg/kg body weight (bw) per day for the parental males as the no observed adverse effect level (NOAEL) of the study. The exposure estimates for [FL-no: 16.132] (31,500 and 50,000 µg/person per day for children and adults, respectively) were above the threshold of toxicological of concern (TTC) for its structural class (III). Using the NOAEL of 1320 mg/kg bw per day at step A4 of the procedure, margins of exposure (MoE) of 1590 and 630 could be calculated for adults and children, respectively. Based on the calculated MoEs, the Panel concluded that the use of naringenin as a flavouring substance does not raise a safety concern.

Scientific opinion on the renewal of the authorisation of Smoke Concentrate 809045 (SF-003) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Smoke Concentrate 809045 (SF-003), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. Product Smoke Concentrate 809045 is obtained by pyrolysis of beech wood. The Panel concluded that the compositional data provided on the Primary Product are adequate. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.1 to 1.5 mg/kg body weight (bw) per day at the mean and from 0.2 to 5.2 mg/kg bw per day at the 95th percentile. The Panel concluded that eleven components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one and benzene-1,2-diol, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for these two components are above the threshold of toxicological concern (TTC) of 0.0025 µg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity.

Scientific opinion on the renewal of the authorisation of Zesti Smoke Code 10 (SF-002) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Zesti Smoke Code 10 (SF-002), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. Zesti Smoke Code 10 is obtained by pyrolysis of hickory and oak woods. Given the limitations of the quantification approach employed by the applicant, the Panel could not judge whether the applied methods meet the legal quality criterion that at least 80% of the volatile fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.02 to 4.6 mg/kg body weight (bw) per day at the mean and from no dietary exposure to 13.0 mg/kg bw per day at the 95th percentile. The Panel concluded that four components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one and benzene-1,2-diol, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for these two components are above the threshold of toxicological concern (TTC) of 0.0025 µg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity.

Scientific opinion on the renewal of the authorisation of Scansmoke SEF7525 (SF-004) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Scansmoke SEF7525 (SF-004), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. Scansmoke SEF7525 is obtained from a tar produced from a mixture of red oak, white oak, maple, beech and hickory. Based on the compositional data, the Panel noted that the identified and quantified proportion of the solvent-free fraction amounts to 32.6 weight (wt)%, thus the applied method does not meet the legal quality criterion that at least 50% of the solvent-free fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with Food Additive Intake Model (FAIM) ranged from 0.6 to 3.8 mg/kg body weight (bw) per day at the mean and from 1.1 to 10.1 mg/kg bw per day at the 95th percentile. Based on the available information on genotoxicity on 44 identified components, the Panel concluded that two substances in the Primary Product, styrene and benzofuran, raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. Considering that the exposure estimates for styrene and benzofuran are above the threshold of toxicological concern (TTC) value of 0.0025 kg/kg bw per day for DNA-reactive mutagens and/or carcinogens and since further data are needed to clarify their potential genotoxicity, the Panel concluded that the potential safety concern for genotoxicity of the Primary Product cannot be ruled out.

Scientific opinion on the renewal of the authorisation of Fumokomp (SF-009) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Fumokomp (SF-009), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003 (in the renewal application the Primary Product is reported as 'Fumokomp Conc.'). This opinion refers to an assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. Fumokomp Conc. is produced by pyrolysis of beech and hornbeam woods. Gas chromatography-mass spectrometry (GC-MS) was applied for both identification and quantification of the volatile constituents of the Primary Product. Given the limitations of the method, the Panel cannot judge with confidence whether the applied method meets the legal quality criterion that at least 80% of the volatile fraction shall be identified and quantified. Moreover, the Panel concluded that the absence of furan-2(5H)-one from the Primary Product was not convincingly demonstrated. At the maximum proposed use levels, dietary exposure estimates calculated with FAIM ranged from 0.04 to 0.9 mg/kg body weight (bw) per day at the mean and from 0.1 to 1.5 mg/kg bw per day at the 95th percentile. The information available on the 32 identified components of the Primary Product, although limited, did not indicate a concern for genotoxicity for any of these substances. However, whole mixture testing in an in vitro mouse lymphoma assay gave positive results which would require an adequate in vivo follow-up study. In addition, the potential for aneugenicity of the Primary Product has not been adequately investigated. Accordingly, the potential safety concern for genotoxicity of the Primary Product cannot be ruled out.

Scientific opinion on the renewal of the authorisation of SmokEz C-10 (SF-005) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product SmoKEz C-10 (SF-005), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. SmoKEz C-10 is obtained by pyrolysis of maple, oak, hickory, ash, birch, beech and cherry woods. Given the limitations of the quantification approach employed by the applicant, the Panel could not judge whether the applied methods meet the legal quality criterion that at least 80% of the volatile fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.01 to 5.1 mg/kg body weight (bw) per day at the mean and from no dietary exposure to 18.1 mg/kg bw per day at the 95th percentile. The Panel concluded that five components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one and benzene-1,2-diol, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for these two components are above the threshold of toxicological concern (TTC) of 0.0025 µg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity.

Scientific opinion on the renewal of the authorisation of proFagus Smoke R714 (SF-001) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product proFagus Smoke R714 (SF-001), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. ProFagus Smoke R714 is obtained by pyrolysis of beech and oak woods as main source materials. Based on the compositional data, the Panel noted that the identified and quantified proportion of the solvent-free fraction amounts to 39 weight (wt)%, thus the applied method does not meet the legal quality criterion that at least 50% of the solvent-free fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.7 to 10.9 mg/kg body weight (bw) per day at the mean and from 2.2 to 42.5 mg/kg bw per day at the 95th percentile. The Panel concluded that three components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for this component are above the threshold of toxicological concern (TTC) of 0.0025 µg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity.

Scientific opinion on the renewal of the authorisation of SmokEz Enviro-23 (SF-006) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product SmokEz Enviro-23 (SF-006), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. SmokEz Enviro-23 is obtained by pyrolysis of oak, maple, hickory, ash, birch, beech and cherry woods. Given the limitations of the quantification approach employed by the applicant, the Panel could not judge whether the applied methods meet the legal quality criterion that at least 80% of the volatile fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.01 to 3.2 mg/kg body weight (bw) per day at the mean and from no dietary exposure to 9.5 mg/kg bw per day at the 95th percentile. The Panel concluded that four components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one and benzene-1,2-diol, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for these two components are above the threshold of toxicological concern (TTC) of 0.0025 µg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity.

Scientific opinion on the renewal of the authorisation of proFagus Smoke R709 (SF-008) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product proFagus Smoke R709 (SF-008), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. ProFagus Smoke R709 is obtained by pyrolysis of beech and oak wood as main source materials. The panel concluded that the compositional data provided on the Primary Product are adequate. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.8 to 12.2 mg/kg body weight (bw) per day at the mean and from 2.3 to 51.4 mg/kg bw per day at the 95th percentile. The Panel concluded that three components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for this component are above the TTC of 0.0025 µg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the panel concluded that the Primary Product raises concern with respect to genotoxicity.

Flavouring Group Evaluation 217 Revision 3 (FGE.217Rev3): consideration of genotoxic potential for α,ß-unsaturated ketones and precursors from chemical subgroup 4.1 of FGE.19: lactones.

The Panel on Food Additives and Flavourings of the European Food Safety Authority was requested to evaluate the genotoxic potential of four flavouring substances [FL-no: 10.023, 10.030, 10.057 and 13.012] from subgroup 4.1 of FGE.19. For three of these substances [FL-no: 10.023, 10.030 and 13.012], the concern for genotoxicity has been ruled out in previous revisions of Flavouring Group Evaluation 217 (FGE.217). However, in FGE.217Rev2, a concern for genotoxicity could not be ruled out for 3a,4,5,7a-tetrahydro-3,6-dimethylbenzofuran-2(3H)-one [FL-no: 10.057]. After publication of FGE.217Rev2, industry provided additional genotoxicity studies for [FL-no: 10.057], which are evaluated in the present opinion FGE.217Rev3. The flavouring substance [FL-no: 10.057] did not induce gene mutations or numerical or structural chromosomal aberrations in vitro. Based on these data, the Panel concluded that the concern for genotoxicity is ruled out for [FL-no: 10.057]. Consequently, it can be evaluated through the Procedure.

Flavouring Group Evaluation 21 Revision 6 (FGE.21Rev6): thiazoles, thiophenes, thiazoline and thienyl derivatives from chemical groups 29 and 30.

The Panel on Food additives and Flavourings (FAF) was requested to evaluate the flavouring substances 2,4-dimethyl-3-thiazoline [FL-no: 15.060] and 2-isobutyl-3-thiazoline [FL-no: 15.119] in Flavouring Group Evaluation 21 revision 6 (FGE.21Rev6). FGE.21Rev6 deals with 41 flavouring substances of which 39 have been already evaluated to be of no safety concern when based on the MSDI approach. For [FL-no: 15.060 and 15.119], a concern for genotoxicity was raised in FGE.21. Genotoxicity data have been submitted for the supporting substance 4,5-dimethyl-2-isobutyl-3-thiazoline [FL-no: 15.032] evaluated in FGE.76Rev2. The concerns for gene mutations and clastogenicity are ruled out for [FL-no: 15.032] and for the structurally related substances [FL-no: 15.060 and 15.119], but not for aneugenicity. Therefore, the aneugenic potential of [FL-no: 15.060 and 15.119] should be investigated in studies with the individual substances. For [FL-no: 15.054, 15.055, 15.057, 15.079 and 15.135], (more reliable) information on uses and use levels is needed to (re)calculate the mTAMDIs in order to finalise their evaluation. Provided that information is submitted for [FL-no: 15.060 and 15.119] with respect to potential aneugenicity, that would allow evaluation of these substances through the Procedure, also for these two substances, more reliable data on uses and use levels would be required. Upon submission of such data, additional data on toxicity may become necessary for all seven substances. For [FL-no: 15.054, 15.057, 15.079 and 15.135], information on the actual percentages of stereoisomers in the material of commerce based on analytical data should be provided.

Scientific Guidance on the data required for the risk assessment of flavourings to be used in or on foods.

Following a request from the European Commission, EFSA developed a new scientific guidance to assist applicants in the preparation of applications for the authorisation of flavourings to be used in or on foods. This guidance applies to applications for a new authorisation as well as for a modification of an existing authorisation of a food flavouring, submitted under Regulation (EC) No 1331/2008. It defines the scientific data required for the evaluation of those food flavourings for which an evaluation and approval is required according to Article 9 of Regulation (EC) No 1334/2008. This applies to flavouring substances, flavouring preparations, thermal process flavourings, flavour precursors, other flavourings and source materials, as defined in Article 3 of Regulation (EC) No 1334/2008. Information to be provided in all applications relates to: (a) the characterisation of the food flavouring, including the description of its identity, manufacturing process, chemical composition, specifications, stability and reaction and fate in foods; (b) the proposed uses and use levels and the assessment of the dietary exposure and (c) the safety data, including information on the genotoxic potential of the food flavouring, toxicological data other than genotoxicity and information on the safety for the environment. For the toxicological studies, a tiered approach is applied, for which the testing requirements, key issues and triggers are described. Applicants should generate the data requested in each section to support the safety assessment of the food flavouring. Based on the submitted data, EFSA will assess the safety of the food flavouring and conclude whether or not it presents risks to human health and to the environment, if applicable, under the proposed conditions of use.

Scientific opinion on Flavouring group evaluation 216 revision 2 (FGE.216Rev2): consideration of the genotoxicity potential of α,ß-unsaturated 2-phenyl-2-alkenals from subgroup 3.3 of FGE.19.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the genotoxic potential of five flavouring substances from subgroup 3.3 of FGE.19, in the Flavouring Group Evaluation 216 (FGE.216). In FGE.216 and in FGE.216Rev1, the CEF Panel requested additional genotoxicity data on 2-phenylcrotonaldehyde [FL-no: 05.062], the representative for these five substances. New experimental data on [FL-no: 05.062] were provided and are evaluated in the present revision of FGE.216 (FGE.216Rev2). Based on the new data, the Panel concluded that, for all the five substances, the concerns for gene mutations and clastogenicity are ruled out by the negative results observed in an in vivo gene mutation assay and in an in vivo comet assay, respectively. In vitro, [FL-no: 05.062] induced micronuclei through an aneugenic mode of action. The available in vivo micronucleus studies were inconclusive and cannot be used to rule out potential aneugenicity of [FL-no: 05.062] in vivo. Therefore, the Panel compared the lowest concentration resulting in aneugenicity in vitro with the use levels reported for this substance. Based on this comparison, the Panel concluded that the use of the flavouring substance [FL-no: 05.062] at the reported use levels in several food categories would raise a concern for aneugenicity. Based on structural similarity, for the remaining four substances in this FGE [FL-no: 05.099, 05.100, 05.175 and 05.222], an aneugenic potential may also be anticipated. For these four substances, individual data are needed to establish whether they have aneugenic potential. Accordingly, it is currently not appropriate to assess any of these five substances through the Procedure for the evaluation of flavouring substances.

Scientific opinion on flavouring group evaluation 415 (FGE.415): (E)-3-benzo[1,3]dioxol-5-yl-N,N-diphenyl-2-propenamide.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the substance (E)-3-benzo[1,3]dioxol-5-yl-N,N-diphenyl-2-propenamide [FL-no: 16.135] as a new flavouring substance, in accordance with Regulation (EC) No 1331/2008. The substance has not been reported to occur naturally and it is chemically synthesised. It is intended to be used as a flavouring substance in specific categories of food, but not intended to be used in beverages. The chronic dietary exposure to [FL-no: 16.135] estimated using the added portions exposure technique (APET), is calculated to be 780 µg/person per day for a 60-kg adult and 480 µg/person per day for a 15-kg 3-year-old child. [FL-no: 16.135] did not show genotoxic effects in bacterial mutagenicity and mammalian cell micronucleus assays in vitro. Developmental toxicity was not observed in a study in rats at the dose levels up to 1,000 mg/kg body weight (bw) per day. The Panel derived a BMDL of 101 mg/kg bw per day from a 90-day toxicity study. Based on this BMDL, adequate margins of exposure of 7,800 and 3,200 could be calculated for adults and children, respectively. The Panel concluded that there is no safety concern for [FL-no: 16.135], when used as a flavouring substance at the estimated level of dietary exposure calculated using the APET approach, based on the intended uses and use levels as specified in Appendix B. The Panel further concluded that the combined exposure to [FL-no: 16.135] from its use as a food flavouring substance and from its presence in toothpaste is also not of safety concern.

Scientific opinion on Prosmoke BW 01.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of Prosmoke BW 01 as a new smoke flavouring primary product, in accordance with Regulation (EC) No 2065/2003. Prosmoke BW01 is produced by pyrolysis of beechwood (Fagus sylvatica L.) sawdust. Its water content is estimated at 56 wt%, the total identified volatile fraction accounts for 28 wt% of the primary product, corresponding to 64% of the solvent-free mass, while the unidentified fraction amounts to 16 wt% of the primary product. Analytical data provided for three batches demonstrated that their batch-to-batch-variability was sufficiently low. However, for the batch used for the toxicological studies, there were substantial deviations in the concentration of nearly all the constituents compared to the other three batches. The dietary exposure of Prosmoke BW 01 was estimated to be between 6.2 and 9.2 mg/kg body weight (bw) per day, respectively, using SMK-EPIC and SMK-TAMDI. Using the FAIM tool, the 95th percentile exposure estimates ranged from 3.2 mg/kg bw per day for the elderly to 17.9 mg/kg bw per day for children. The Panel noted that furan-2(5H)-one is present in all batches of the primary product at an average concentration of 0.88 wt%. This substance was evaluated by the FAF Panel as genotoxic in vivo after oral exposure. The Panel considered that the (geno)toxicity studies available on the whole mixture were not adequate to support the safety assessment, due to limitations in these studies and because they were performed with a batch which may not be representative for the material of commerce. Considering that the exposure estimates for furan-2(5H)-one are above the TTC value of 0.0025 µg/kg bw per day (or 0.15 µg/person per day) for DNA-reactive mutagens and/or carcinogens, the Panel concluded that Prosmoke BW 01 raises a concern with respect to genotoxicity.

Safety and efficacy of a feed additive consisting of Sunset Yellow FCF for cats and dogs, ornamental fish, grain-eating ornamental birds and small rodents (Sensient Colours Europe GmbH).

Following a request from the European Commission, the EFSA Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) was asked to deliver a scientific opinion on the safety and efficacy of Sunset Yellow FCF for cats, dogs, ornamental fish, grain-eating ornamental birds and small rodents when used as an additive that adds or restores colour in feedingstuffs. Sunset Yellow FCF is considered safe for the target species at the following concentrations in complete feed: 165 mg/kg for cats, 198 mg/kg for dogs, 733 mg/kg for ornamental fish, 24 mg/kg for grain-eating ornamental birds and 750 mg/kg for small rodents. In the absence of adequate information, the FEEDAP Panel cannot conclude neither on the eyes and skin irritation potential of Sunset yellow FCF, nor on its skin sensitisation potential. Exposure by inhalation is considered to be unlikely. The FEEDAP Panel cannot conclude on the efficacy of the additive.

Evaluating Confidence in Toxicity Assessments Based on Experimental Data and In Silico Predictions.

Understanding the reliability and relevance of a toxicological assessment is important for gauging the overall confidence and communicating the degree of uncertainty related to it. The process involved in assessing reliability and relevance is well defined for experimental data. Similar criteria need to be established for in silico predictions, as they become increasingly more important to fill data gaps and need to be reasonably integrated as additional lines of evidence. Thus, in silico assessments could be communicated with greater confidence and in a more harmonized manner. The current work expands on previous definitions of reliability, relevance, and confidence and establishes a conceptional framework to apply those to in silico data. The approach is used in two case studies: 1) phthalic anhydride, where experimental data are readily available and 2) 4-hydroxy-3-propoxybenzaldehyde, a data poor case which relies predominantly on in silico methods, showing that reliability, relevance, and confidence of in silico assessments can be effectively communicated within Integrated approaches to testing and assessment (IATA).

Scientific Opinion on Flavouring Group Evaluation 7, Revision 6 (FGE.07Rev6): saturated and unsaturated aliphatic secondary alcohols, ketones and esters of secondary alcohols and saturated linear or branched-chain carboxylic acids from chemical group 5.

The EFSA Panel on Food Additives and Flavourings was requested to evaluate 55 flavouring substances assigned to the Flavouring Group Evaluation 07 (FGE.07), using the Procedure as outlined in the Commission Regulation (EC) No 1565/2000. Fifty-three substances have already been considered in FGE.07 and its revisions. This revision 6 includes two additional substances which have been cleared with respect to genotoxicity in FGE.201Rev2 (4-methyl-3-hepten-5-one [FL-no: 07.261]) and FGE.204Rev1 (non-2-en-4-one, [FL-no: 07.187]). The substances were evaluated through a stepwise approach that integrates information on the structure-activity relationships, intake from current uses, toxicological threshold of concern (TTC) and available data on metabolism and toxicity. The Panel concluded that none of the 55 substances gives rise to safety concerns at their levels of dietary intake, when estimated on the basis of the 'Maximised Survey-derived Daily Intake' (MSDI) approach. Besides the safety assessment of the flavouring substances, the specifications for the materials of commerce have also been considered and found adequate. Normal and maximum use levels were available for all flavouring substances. For 52 substances, including the newly included substances [FL-no: 07.187 and 07.261], their 'modified Theoretical Added Maximum Daily Intakes' (mTAMDIs) estimates were above the TTC for their structural classes (I and II). Therefore, for these 52 flavouring substances, more detailed data on uses and use levels should be provided to finalise their safety evaluations.

Scientific Opinion on Flavouring Group Evaluation 63, Revision 4 (FGE.63Rev4): consideration of aliphatic secondary saturated and unsaturated alcohols, ketones and related esters evaluated by JECFA (59th and 69th meetings) structurally related to flavouring substances evaluated by EFSA in FGE.07Rev6.

The EFSA Panel on Food Additives and Flavourings was requested to evaluate 43 flavouring substances assigned to the Flavouring Group Evaluation 63 (FGE.63), using the Procedure as outlined in the Commission Regulation (EC) No 1565/2000. Twenty-nine substances have already been considered in FGE.63 and its revisions ([FL-no: 02.023, 02.099, 02.104, 02.136, 02.155, 02.252, 07.015, 07.069, 07.081, 07.099, 07.100, 07.101, 07.102, 07.114, 07.123, 07.151, 07.190, 07.240, 07.247, 07.249, 07.256, 09.281, 09.282, 09.657, 09.658, 09.923, 09.924, 09.925 and 09.936]). The remaining 14 flavouring substances have been cleared with respect to genotoxicity in FGE.204Rev1 ([FL-no: 02.102, 02.193, 07.044, 07.048, 07.082, 07.104, 07.105, 07.106, 07.107, 07.121, 07.139, 07.177, 07.188 and 07.244]) and they are considered in this revision 4 of FGE.63. The substances were evaluated through a stepwise approach that integrates information on the structure-activity relationships, intake from current uses, toxicological threshold of concern (TTC) and available data on metabolism and toxicity. The Panel concluded that none of these 43 substances gives rise to safety concerns at their levels of dietary intake, when estimated on the basis of the 'Maximised Survey-derived Daily Intake' (MSDI) approach. Besides the safety assessment of the flavouring substances, the specifications for the materials of commerce have also been considered and found adequate for 43 flavouring substances. However, for 14 of these flavouring substances in the present revision and for 10 of the substances in the previous revision (FGE.63Rev3), the 'modified Theoretical Added Maximum Daily Intakes' (mTAMDIs) values are equal to or above the TTCs for their structural classes (I and II). For 15 substances previously evaluated in FGE.63Rev3, use levels are still needed to calculate the mTAMDI estimates. Therefore, in total for 39 flavouring substances, more data on uses and use levels should be provided to finalise their safety evaluations.