Laser Atherectomy to Treat Severe In Stent Restenosis of the Superior Mesenteric Artery.

Chronic mesenteric ischemia is an uncommon disorder in the USA. Frequently, a percutaneous approach is the first therapeutic choice to reduce its symptoms and improve outcomes. After an initial treatment with stents, further interventions might be necessary to address in-stent restenosis and re-establish a better visceral flow. Using laser atherectomy in a similar fashion as used in the peripheral arteries, has proven to be safe helping to achieve a desired final result. We present a case of chronic mesenteric ischemia in a 53-year-old man caused by severe in-stent restenosis who had abdominal pain and weight loss. We used a 0.9 mm laser catheter with low energy and pulse rate as an adjunct to balloon therapy. After revascularization, the patient's symptoms improved dramatically. To the best of our knowledge, this is the first published case in which atherectomy with laser was used to treat severe in-stent restenosis of a mesenteric vessel in chronic mesenteric ischemia. Learning Objective The treatment of severe in-stent restenosis of the superior mesenteric artery using laser atherectomy is safe and can give excellent results when traditional percutaneous therapies fail.

Bacterial lipoxygenases, a new subfamily of enzymes? A phylogenetic approach.

Lipoxygenases (EC. 1.13.11.12) are a non-heme iron enzymes consisting of one polypeptide chain folded into two domains, the N-terminal domain and the catalytic moiety ß-barrel domain. They catalyze the dioxygenation of 1Z,4Z-pentadiene moieties of polyunsaturated fatty acids obtaining hydroperoxy fatty acids. For years, the presence of lipoxygenases was considered a eukaryotic feature, present in mammals, plants, small marine invertebrates, and fungi, but now, some lipoxygenase sequences have been detected on prokaryotic organisms, changing the idea that lipoxygenases are exclusively a eukaryotic affair. Lipoxygenases are involved in different types of reactions on eukaryote organisms where the biological role and the structural characteristics of these enzymes are well studied. However, these aspects of the bacterial lipoxygenases have not yet been elucidated and are unknown. This revision discusses biochemical aspects, biological applications, and some characteristics of these enzymes and tries to determine the existence of a subfamily of bacterial lipoxygenases in the context of the phylogeny of prokaryotic lipoxygenases, supporting the results of phylogenetic analyzes with the comparison and discussion of structural information of the first prokaryotic lipoxygenase crystallized and other eukaryotic lipoxygenases structures.

Biosurfactants production by yeasts using soybean oil and glycerol as low cost substrate

Biosurfactants are bioactive agents that can be produced by many different microorganisms. Among those, special attention is given to yeasts, since they can produce many types of biosurfactants in large scale, using several kinds of substrates, justifying its use for industrial production of those products. For this production to be economically viable, the use of residual carbon sources is recommended. The present study isolated yeasts from soil contaminated with petroleum oil hydrocarbons and assessed their capacity for producing biosurfactants in low cost substrates. From a microbial consortium enriched, seven yeasts were isolated, all showing potential for producing biosurfactants in soybean oil. The isolate LBPF 3, characterized as Candida antarctica, obtained the highest levels of production - with a final production of 13.86 g/L. The isolate LBPF 9, using glycerol carbon source, obtained the highest reduction in surface tension in the growth medium: approximately 43% of reduction after 24 hours of incubation. The products obtained by the isolates presented surfactant activity, which reduced water surface tension to values that varied from 34 mN/m, obtained from the product of isolates LBPF 3 and 16 LBPF 7 (respectively characterized as Candida antarctica and Candida albicans) to 43 mN/m from the isolate LPPF 9, using glycerol as substrate. The assessed isolates all showed potential for the production of biosurfactants in conventional sources of carbon as well as in agroindustrial residue, especially in glycerol.

Biosurfactants production by yeasts using soybean oil and glycerol as low cost substrate.

Biosurfactants are bioactive agents that can be produced by many different microorganisms. Among those, special attention is given to yeasts, since they can produce many types of biosurfactants in large scale, using several kinds of substrates, justifying its use for industrial production of those products. For this production to be economically viable, the use of residual carbon sources is recommended. The present study isolated yeasts from soil contaminated with petroleum oil hydrocarbons and assessed their capacity for producing biosurfactants in low cost substrates. From a microbial consortium enriched, seven yeasts were isolated, all showing potential for producing biosurfactants in soybean oil. The isolate LBPF 3, characterized as Candida antarctica, obtained the highest levels of production - with a final production of 13.86 g/L. The isolate LBPF 9, using glycerol carbon source, obtained the highest reduction in surface tension in the growth medium: approximately 43% of reduction after 24 hours of incubation. The products obtained by the isolates presented surfactant activity, which reduced water surface tension to values that varied from 34 mN/m, obtained from the product of isolates LBPF 3 and 16 LBPF 7 (respectively characterized as Candida antarctica and Candida albicans) to 43 mN/m from the isolate LPPF 9, using glycerol as substrate. The assessed isolates all showed potential for the production of biosurfactants in conventional sources of carbon as well as in agroindustrial residue, especially in glycerol.

Rhamnolipid surfactants: alternative substrates, new strategies.

This chapter concentrates on the various possibilities of using alternative substrates and new strategies. Such strategies include an integrated production system to reduce the environmental impact and an attempt to minimize residues, which reinforces socio-economic and region-structural development. Additionally, we offer an overview of the physicochemical and biological properties of rhamnolipid surfactants associated with the applications of these molecules in different circumstances.

Pseudomonas aeruginosa LBI production as an integrated process using the wastes from sunflower-oil refining as a substrate.

Pseudomonas aeruginosa LBI produced surface active rhamnolipids when cultivated on waste from the sunflower-oil process under different conditions. These biosurfactants, which reduce the superficial and interfacial tensions between fluids, offer advantages over their chemical counterparts, especially because of their ecological acceptability. These molecules can be used in fields as diverse as chemical, pharmaceutical and petrochemical industries. In this work, we present the effect of C/N ratio on growth and production yield. The best production yields (Y P/S) were achieved for C/N ratios (in g/g) of 8/1 (0.22) and 6.4/1 (0.23). The product concentration was very satisfactory (7.3g/L) at C/N ratio of 8/1, especially when considering that the substrate was basically composed of wastes that would otherwise constitute an environmental disposal problem.

Asymmetrical flow field-flow fractionation coupled to multiangle laser light scattering detector: optimization of crossflow rate, carrier characteristics, and injected mass in alginate separation.

The coupling of the flow field-flow fractionation (FlFFF) to differential refractive index (DRI) and multiangle laser light scattering (LS) detectors is a powerful tool for characterizing charged polysaccharides such as alginate. However, the correct interpretation of the experimental results and extrapolation of meaningful molecular parameters by using an analytical tool with such a level of complexity requires improvement of the knowledge of the alginate behavior in the channel and careful optimization of the operating conditions. Therefore, the influence of the critical operating parameters, such as crossflow rate, carrier composition and concentration, and sample load, on the alginate retention was carefully evaluated. Combined information obtained simultaneously by DRI and LS detectors over the wide range of the crossflow rate, carrier liquid concentration, and injected amount, allowed to set the appropriate combination of optimal parameters. It was found that the crossflow rate of 0.25 mL/min, carrier solution containing 5x10(-2 )mol/L ammonium or sodium chloride, and 50-100 microg of injected sample mass were necessary to achieve complete separation and determination of the meaningful molecular characteristics. The values of the weight-average hydrodynamic radius (R(Hw)), radius of gyration (R(G)), and molar mass (M), obtained under the optimal conditions were in good agreement to those found for alginates in the literature.

Rhamnolipid produced from agroindustrial wastes enhances hydrocarbon biodegradation in contaminated soil.

A crude biosurfactant solution was produced by Pseudomonas aeruginosa growing on agroindustrial wastes as the substrate and used to study its effect on hydrocarbon biodegradation by the indigenous soil microflora under laboratory conditions. Two concentrations were studied at first and 1 mg of biosurfactant/g of soil showed to be the most efficient for the total petroleum hydrocarbon reduction, which reached 85% at the first 20 days in soil microcosms. Respirometric and microbial analyses showed that the biosurfactant added did not have toxic effects over the microbial population. The use of a biosurfactant for bioremediation has been limited because of its high cost production. Biosurfactants produced from cost-free by-products combines waste minimization with economic potential bioremediation process.

Cell sorting by one gravity SPLITT fractionation.

The need for innovative separative techniques suitable for the fractionation of biomaterials prompted this investigation into the performance of the gravitational split-flow thin channel (G-SPLITT) system as a cell sorter. The rigorous mathematical description of the separation mechanism allows achievement of fast separation of several million myeloma cells from healthy splenocytes using flow conditions calculated from theory. Separation in G-SPLITT is based on differences in sedimentation rate. For accurate prediction of the optimal working conditions, this parameter was directly measured by cell tracking velocimetry rather than relying on a measure of diameter (by Multisizer) and an assumed density for each cell population. We also discuss the influence of different flow conditions on the effectiveness of separation.

Influence of ionic strength, sample size, and flow conditions on the retention behavior of pullulan in flow field-flow fractionation.

Polymer molecular parameters such as hydrodynamic size are expected to be invariant regardless of the technique used to measure them, and to vary only, to some extent, with the solvent power and the polymer structure and properties as predicted from polymer chemistry. The hydrodynamic size of five pullulan standards derived from FlFFF in solutions of different ionic strength appears to correlate well to molecular mass as expected for neutral polymers for all fractions except that of lower mass. The correlation also holds for large amounts of injected sample even though with a slope which increases with rising polymer load. The evidence that the same result is obtained also for low sample amounts but with a higher cross-flow rate is interpreted as the manifestation of the presence of hydrodynamic interactions in concentrated polymer systems.

Flow field-flow fractionation and characterization of ionic and neutral polysaccharides of vegetable and microbial origin.

The flow field-flow fractionation (FlFFF) analysis of a variety of neutral as well as ionic polysaccharides from plants and micro-organisms shows the generally broad distribution in molecular size of these polymers. This result is also obtained on a commercial sample of pullulan whose size distribution appears much wider than that of any of five standard fractions of the same polymer. Clear evidence of some physico-chemical properties of the polysaccharides is given by the study of the effect of the carrier ionic strength on salep, oxidized salep and konjac, carboxymethylcellulose and hyaluronic acid. While neutral polysaccharides, regardless of their origin, only slightly change size distribution in the presence of a simple electrolyte in solution, charged polymers, either naturally charged or chemically ionized, consistently exhibit very low retention levels in water which dramatically increase even at low salt concentrations. Exclusion mechanisms, including steric effects, are shown to be responsible for the anticipated retention times in water of these species that assume the expected statistical coil behavior only when electric charges are screened by the added electrolyte. Under these conditions, higher retention levels are obtained because the volume adjacent to the accumulation wall becomes more accessible to the sample during relaxation. On the basis of these findings, the elution behavior of a number of polysaccharide samples in-laboratory obtained from the fungus Aureobasidium pullulans under different incubation conditions is attributed to the presence of species varying in physico-chemical properties and molecular size.