Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 2 de 2
Filter
Add more filters










Database
Language
Publication year range
1.
J Hazard Mater ; 424(Pt B): 127507, 2022 02 15.
Article in English | MEDLINE | ID: mdl-34879512

ABSTRACT

Red mud is a solid hazardous alumina industrial waste, which is rich in iron, titanium, aluminum, silicon, calcium, etc. The red mud contains 30-60% of hematite, which is suitable for shielding high energy X- and gamma rays. So, the iron rich red mud was converted into diagnostic X-ray shielding tiles through ceramic route by adding a certain weight percentage of BaSO4 and binders (kaolin clay or sodium hexametaphosphate) with it. The kaolin clay tile possess sufficient impact strength (failure point is 852 mm for 19 mm steel ball) and flexural strength of ~25 N/mm2, which is suitable for wall applications. The 10.3 mm and 14.7 mm thick red mud:BaSO4:kaolin clay tile possess the attenuation equivalent to 2 mm and 2.3 mm lead at 125 kVp and 140 kVp, respectively. No heavy elements were found to leach out except chromium and arsenic from the sintered tiles. However, the leaching of Cr (0.6 ppm) and As (0.015 ppm) was found to be well below the permissible limit. These tiles can be used in the X-ray diagnosis, CT scanner, bone densitometry, and cath labs instead of toxic lead sheet and thereby to protect the operating personnel, public, and environment from radiation hazards.


Subject(s)
Aluminum Oxide , Hazardous Waste , Ceramics , Industrial Waste/analysis , Iron , Radiography
2.
Inorg Chem ; 59(10): 6763-6773, 2020 May 18.
Article in English | MEDLINE | ID: mdl-32343126

ABSTRACT

We report high-temperature synchrotron X-ray diffraction (SXRD), magnetization, and current-voltage (I-V) characteristics for the samples of Co2.75Fe0.25O4 ferrite. The material was prepared by chemical reaction of the Fe and Co nitrate solutions at pH ∼ 11 and subsequent thermal annealing. Physical properties of the samples were measured by cycling the temperature from 300 K to high temperature (warming mode) and returning back to 300 K (cooling mode). The lattice structure showed sensitivity to high measurement temperatures. Magnetization curves showed a defect-induced ferromagnetic phase at higher temperatures and superparamagnetic blocking of the ferrimagnetic particles near to 300 K or below. Electrical conductivity exhibited a thermal hysteresis loop at higher measurement temperatures. The samples exhibited new form (not studied so far) of surface magnetism in Co rich spinel oxides and irreversibility phenomena in the lattice structure, magnetization, and conductivity on cycling the measurement temperatures.

SELECTION OF CITATIONS
SEARCH DETAIL
...