Soldering in Dentistry: An Updated Technical Review.

INTRODUCTION: The need to permanently join two or more pieces of metal using heat is a frequent condition in various fields of medicine such as dentistry. Welding, brazing and soldering are permanent joining techniques between different metals that require in-depth background knowledge in order to obtain predictable results. AIM: This review examines the different methods of joining metals using heat and their fields of application. DISCUSSION: It is possible to create permanent metal joints in various phases of the creation of final products that will be used on the patient. In several cases, welds are also made directly by the manufacturer during industrial processing. In dentistry, dental laboratories perform complex welds mainly on dental prostheses and orthodontic appliances during the production process. It is also possible to obtain intraoral welding carried out by the clinician inside the patient's oral cavity. Welding can be carried out using combustible gases, electric current, infrared light and laser light through different technical procedures which must be chosen according to the specific needs and the metals to be joined. CONCLUSIONS: It is useful for the dentist and dental technician to know the different welding methods, including those carried out in the factory by the manufacturer, to better understand the physical properties and mechanical resistance of the components marketed for the construction of prostheses and orthodontic appliances. The enormous variety of conditions in which those who practice welding can find themselves therefore presupposes in-depth knowledge in this field in order to apply the most suitable technique.

The Effects of Low-frequency Vibration on Aligner Treatment Duration: A Clinical Trial.

Objectives: The aim of this study was to investigate the effectiveness of an orthodontic tooth movement acceleration device (AcceleDent, OrthoAccel Technologies, Houston, Texas) when used during an aligner treatment. Materials and Methods: Adult patients who began an aligner treatment (Lineo, Micerium Lab, Avegno, Italy) were allocated to two treatment groups. The first one (Group A), with a 7-day aligner change regimen, used the AcceleDent device for 20 min per day, whereas the second one (Group B) changed the aligners every 14 days and did not use any device. The registered outcomes were the possibility of completing the treatment, the number of aligners needed and treatment duration in the two groups. Moreover, we assessed patients' perception of pain during the first week of treatment. Results: Twenty-four patients were allocated to Group A or B depending on the acceptance of AcceleDent use. Patients which used AcceleDent (Group A) completed the treatment using each aligner for fewer days than those belonging to Group B (9.0 ± 1.0 and 15.4 ± 1.2 days, respectively) (P < 0.001). As a secondary outcome, a significant difference was found in pain perception during the first week of treatment between the two groups (P < 0.05). Conclusions: This controlled clinical trial shows that is possible to apply a 7-day change regimen together with AcceleDent use and successfully complete an aligner treatment with a significant saving of time when compared to a standard 14-days change regimen. Finally, the use of this device allowed reduction in pain perception during the orthodontic treatment.

Transverse Asymmetries of the Maxilla Even in Healthy and Apparently Symmetrical Subjects.

In the formulation of an orthodontic treatment plan, the three-dimensional analysis of the dental arches represents a fundamental moment for the evaluation of all the morphological parameters necessary in order to have a correct and complete diagnosis. In this regard, the study of the dental arches on the horizontal plane is sometimes neglected or not thorough enough. When evaluating the transverse dimensions of the dental upper arche, the presence of an asymmetry is frequently found, and it means that an hemiarch is larger than the other. Furthermore, any variation in one of the three planes of space always involves an alteration also on the other two planes in order to have compensation. The morphology of a bone segment depends on various factors, mainly genetical, acquired and environmental. Regarding the environmental factors, the function determines the morphology, but this in turn determines the function. In the case of unilateral mastication, the upper maxilla will be asymmetrical, so growing patients will have compensation on other skull bones. From these considerations arises the need for a careful study of the horizontal plane of the maxilla in the presence of a malocclusion during diagnostic evaluations. These asymmetries, however, must be evaluated and quantified in the diagnostic phase in order to formulate a correct plan of treatment. The aim of this work is to demonstrate that there are almost always transverse asymmetries of the maxilla, albeit of a slight entity, even in healthy and apparently symmetrical subjects.

Human Spheroids from Adipose-Derived Stem Cells Induce Calvarial Bone Production in a Xenogeneic Rabbit Model.

ABSTRACT: Calvarial defects can result from several causes. Tissue engineering hold the potential to restore native form and protective function. We have recently shown that stemness and differentiation ability of spheroids from adipose-derived stem cells (S-ASCs) promotes osteoblasts growth within Integra in a small vertebral lesion. In our study, we aimed to test osteogenic potential of S-ASCs in aiding regeneration of a calvarial defect. Groups containing Integra showed increased bone regeneration at the calvarial defect-Integra interface compared with the control group. In particular, S-ASC-derived osteoblasts group showed a superior calvarial remodeling than undifferentiated S-ASCs group. Clusters of ossification were observed in these both groups with enhanced microvasculature density and fibrosis. In conclusion, seeding of S-ASCs in dermal regeneration templates enhanced bone healing in a rabbit calvarial defect model. These findings could prompt the elective use of S-ASCs with enhanced multilineage differentiation potential for tissue engineering purposes.

Photobiomodulation Therapy in the Management of Burning Mouth Syndrome: Morphological Variations in the Capillary Bed.

Burning mouth syndrome (BMS) is an idiopathic condition that manifests itself primarily with the onset of a burning sensation. The aim of this research was to perform photobiomodulation therapy (PBM) using a diode laser on the oral mucosa of BMS patients, followed by an objective evaluation of the morphological changes in the vascular bed underlying the mucosa using polarized light videocapillaroscopy. A group of 40 patients were included in the study. The patients were randomly divided into two groups (using simple randomization) as follows: 20 patients were assigned to the laser group and 20 patients were assigned to the placebo group. Each patient of the laser group received eight irradiations (with 4 Watt of power, wavelength 800 nm, energy 1200 Joules, irradiation time of 300 s, energy density 50 J/cm2, 60 mW continuous wave laser, and irradiance 180 mW/cm2), twice a week, blinded to the type of irradiation administered, for four consecutive weeks. The patients in the placebo group underwent the same sessions as the other patients, the only difference was the non-emission of the laser. An initial check of the vascular bed was performed with a polarized light videocapillaroscope. This was followed by treatment with a therapeutic diode laser and a subsequent check with a videocapillaroscope. We observed that in the group of patients who underwent laser therapy, there was a lasting improvement in symptoms. The capillary oral bed of patients in the placebo group did not show any statistically significant difference (p > 0.05). In the laser group we observed the following: in the buccal mucosa the diameter of the capillary had a reduction of 3 µm; in the upper lip mucosa, there was a reduction of 3 µm; in the lower lip mucosa, there was a reduction of 3 µm; and in the dorsal lingual surface, there was a reduction of 2 µm. An increase in capillary length was also obtained in all irradiated regions in the laser group patients (p < 0.05). PBM induces microcirculatory changes that are still present over a long period of time, such as an improvement in the clinical picture. The improvement in the symptoms has been correlated to the reduction of the capillary diameter. The placebo effect only led to a temporary improvement in symptoms that were unrelated to changes in the microcirculatory pattern.

Gag reflex control through acupuncture: a case series.

BACKGROUND: Many patients avoid dental appointments because of severe gagging when they have work performed, such as taking impressions. There are several methods known to alleviate gagging, and some studies have suggested that acupuncture may be effective in reducing gag reflex. The aim of the present study therefore was to evaluate whether acupuncture can produce a reduction of the gag reflex. METHODS: A total of 20 patients, aged between 19 and 80 years, with history of gag reflex on taking dental impressions, were recruited. All patients fulfilling the inclusion criteria had an upper and lower dental alginate impression taken without acupuncture, and a second upper and lower alginate impression taken immediately after acupuncture based on traditional Chinese medicine. After each impression, the patients recorded their emetic sensation using a visual analogue scale (VAS). RESULTS: The results showed a significant (p<0.05) reduction in the gag reflex scores after acupuncture. For upper impressions, they fell from 6.8 (1.1) to 1.1 (1.1); and for lower impressions, from 5.45 (1.0) to 0.4 (0.7) (mean (SD)). CONCLUSIONS: The findings from our study suggest that acupuncture may be useful for preventing and treating gag reflex, and justifies further study.

[Relationship between overweight, obesity and malocclusion in a sample of children]. / Correlazione tra status nutrizionale e malocclusione in un gruppo di bambini tra i 3 e i 12 anni d'età. Correggere lo stile di vita.

Obesity and malocclusion are two very common disease worldwide affecting both adults and children, posing a threat to the physical and mental health. Our observational study assesses the impact of being obese and overweight in the development of malocclusion among childhood subjects (3-12 year old).

[Celiac disease and malocclusion]. / Malattia celiaca e malocclusione.

Celiac disease is an autoimmune disease, caused by a permanent intolerance to gluten, that occurs in genetically predisposed individuals. It causes enteropathy. In these individuals a prolonged exposure to gluten increases the risk of developing other pathologies, which may affect both developing dentition and oral mucosa. Clinical presentations are various and atypical. Celiac patients may have enamel hypoplasia, higher prevalence of dental caries, delayed eruption of teeth and lower jaw growth. These factors predispose to malocclusion.

[Functional and occlusion rehabilitation in a patient with Rett syndrome: a case report]. / Riequilibrio occluso-funzionale in un soggetto con sindrome di Rett: descrizione di un caso.

Rett syndrome is a severe neurodevelopmental disease caused by mutations in the X-linked gene encoding for the methyl-CpG-binding protein MeCP2. The aim of this paper is to show the orthodontic treatment of a little girls affected by Rett syndrome.

[Pierre Robin syndrome treated by physiotherapy electromyography assisted]. / Sindrome di Pierre Robin trattata con fisioterapia elettromiograficamente assistita.

Pierre Robin syndrome is characterized by the triad: micrognathia, cleft palate and glossoptosis. This syndrome, which often undermines several organs and systems, is treated with a multidisciplinary approach that involves several specialists. The AA. present a case of Pierre Robin syndrome in neuromuscular rehabilitation by physiotherapy EMG-assisted.