ABSTRACT
The acetone-butanol-ethanol (ABE) fermentation by solventogenic clostridia has a long history of industrial butanol production. The Clostridium beijerinckii mutant BA101 has been widely studied for ABE fermentation owing to its enhanced butanol production capacity. Here, we characterized the BA101 mutant under controlled environmental conditions in parallel with the parental strain C. beijerinckii NCIMB 8052. To investigate the correlation between phenotype and genotype, we carried out the genome sequencing of BA101. Through comparative genomic analysis, several mutations in the genes encoding transcriptional regulator, sensor kinase, and phosphatase were identified in the BA101 genome as well as other sibling mutants. Among them, the SNP in the Cbei_3078 gene encoding PAS/PAC sensor hybrid histidine kinase was unique to the BA101 strain. The identified mutations relevant to the observed physiological behaviors of BA101 could be potential genetic targets for rational engineering of solventogenic clostridia toward desired phenotypes.
Subject(s)
Clostridium beijerinckii , Butanols , Clostridium beijerinckii/genetics , Fermentation , Genomics , Phenotype , SolventsABSTRACT
CRISPR-Cas9 has been explored as a transformative genome engineering tool for many eukaryotic organisms. However, its utilization in bacteria remains limited and ineffective. This chapter, taking Clostridium beijerinckii as an example, describes the use of Streptococcus pyogenes CRISPR-Cas9 system guided by the single chimeric guide RNA (gRNA) for diverse genome-editing purposes, including chromosomal gene deletion, integration, single nucleotide modification, as well as "clean" mutant selection. The general principle is to use CRISPR-Cas9 as an efficient selection tool for the edited mutant (whose CRISPR-Cas9 target site has been disrupted through a homologous recombination event and thus can survive selection) against? the wild type background cells. This protocol is broadly applicable to other microorganisms for genome-editing purposes.
Subject(s)
CRISPR-Cas Systems/genetics , Clostridium beijerinckii/genetics , Clustered Regularly Interspaced Short Palindromic Repeats/genetics , Genome, Bacterial/genetics , Chromosome Deletion , Homologous Recombination/genetics , RNA, Guide, Kinetoplastida/genetics , Streptococcus pyogenes/geneticsABSTRACT
Clostridium beijerinckii is a predominant solventogenic clostridia with great attraction for renewable liquid biofuel and biochemical production. Metabolic engineering and synthetic biology can be employed to engineer the strain toward desirable phenotypes. However, current limited information such as promoter strength and gene regulation may hinder the efficient engineering of the strain. To investigate genetic information and complex cellular bioprocesses of C. beijerinckii, an in vivo fluorescence reporter system can be employed. In general, green fluorescence protein (GFP) and relative analogs have been widely used as real-time reporters. However, GFP-family proteins require molecular oxygen for fluorescence maturation. Considering the strict anaerobic growth requirement of the clostridia, an oxygen-independent fluorescence reporter such as a flavin mononucleotide-based fluorescent protein (FbFP) can be used as an alternative fluorescence reporter. In this study, we synthesized and expressed the codon-optimized FbFP gene for C. beijerinckii (CbFbFP) based on the nucleotide sequence of Bacillus subtilis YtvA variant EcFbFP in C. beijerinckii NCIMB 8052 wild-type. Protein expression and in vivo fluorescence of CbFbFP in C. beijeirnckii were confirmed under anaerobic growth conditions. Through fluorescence-activated cell sorting (FACS), we isolated the bright cells from the heterogenous population of C. beijerinckii cells expressing CbFbFP. Several mutations were found in the isolated plasmid which may be responsible for the high-level expression of CbFbFP in C. beijerinckii. The mutant plasmid and CbFbFP reporter were further utilized for strain selection, real-time fluorescence measurement, population analysis, and metabolic engineering in this study.
Subject(s)
Bacterial Proteins/genetics , Clostridium beijerinckii/genetics , Flavin Mononucleotide/genetics , Bacterial Proteins/metabolism , Clostridium beijerinckii/metabolism , Flavin Mononucleotide/metabolism , Genes, Reporter , Mutation , PlasmidsABSTRACT
Clostridium beijerinckii is a predominant solventogenic bacterium that is used for the ABE fermentation. Various C. beijerinckii mutants are constructed for desirable phenotypes. The C. beijerinckii mutant BA105 harboring a glucose derepression phenotype was previously isolated and demonstrated the enhanced amylolytic activity in the presence of glucose. Despite its potential use, BA105 is not further characterized and utilized. Therefore, the authors investigate fermentation phenotypes of BA105 in this study. Under the typical batch fermentation conditions, BA105 consistently exhibits acid crash phenotype resulting in limited glucose uptake and cell growth. However, when the culture pH is maintained above 5.5, BA105 exhibits the increased glucose uptake and butanol production than did the wild-type. To further analyze BA105, the authors perform genome sequencing and RNA sequencing. Genome analysis identifies two SNPs unique to BA105, in the upstream region of AbrB regulator (Cbei_4885) and the ROK family glucokinase (Cbei_4895) which are involved in catabolite repression and regulation of sugar metabolism. Transcriptional analysis of BA105 reveals significant differential expression of the genes associated with the PTS sugar transport system and acid production. This study improves understanding of the acid crash phenomenon and provides the genetic basis underlying the catabolite derepression phenotype of C. beijericnkii.
Subject(s)
Clostridium beijerinckii/genetics , Clostridium beijerinckii/metabolism , Glucose/metabolism , Mutation/genetics , Acetone/metabolism , Alcohols/metabolism , Fermentation , Gene Expression Profiling , Genome, Bacterial/genetics , Genomics , Hydrogen-Ion Concentration , Mutation/physiology , Phenotype , Polymorphism, Single Nucleotide/geneticsABSTRACT
Spo0A is a master regulator that governs the metabolic shift of solventogenic Clostridium species such as Clostridium beijerinckii. Its disruption can thus potentially cause a significant alteration of cellular physiology as well as metabolic patterns. To investigate the specific effect of spo0A disruption in C. beijerinckii, a spo0A mutant of C. beijerinckii was characterized in this study. In a batch fermentation with pH control at 6.5, the spo0A mutant accumulated butyrate and butanol up to 8.96 g/L and 3.32 g/L, respectively from 60 g/L glucose. Noticing the unique phenotype of the spo0A mutant accumulating both butyrate and butanol at significant concentrations, we decided to use the spo0A mutant for the production of butyl butyrate that can be formed by the condensation of butyrate and butanol during the ABE fermentation in the presence of the enzyme lipase. Butyl butyrate is a value-added chemical that has numerous uses in the food and fragrance industry. Moreover, butyl butyrate as a biofuel is compatible with Jet A-1 aviation kerosene and used for biodiesel enrichment. In an initial trial of small-scale extractive batch fermentation using hexadecane as the extractant with supplementation of lipase CalB, the spo0A mutant was subjected to acid crash due to the butyrate accumulation, and thus produced only 98 mg/L butyl butyrate. To alleviate the butyrate toxicity, the biphasic medium was supplemented with 10 g/L CaCO3 and 5 g/L butanol. The butyl butyrate production was then increased up to 2.73 g/L in the hexadecane layer. When continuous agitation was performed to enhance the esterification and extraction of butyl butyrate, 3.32 g/L butyl butyrate was obtained in the hexadecane layer. In this study, we successfully demonstrated the use of the C. beijerinckii spo0A mutant for the butyl butyrate production through the simultaneous ABE fermentation, condensation, and extraction. Biotechnol. Bioeng. 2017;114: 106-112. © 2016 Wiley Periodicals, Inc.
Subject(s)
Bioreactors/microbiology , Butyrates/metabolism , Clostridium beijerinckii/genetics , Clostridium beijerinckii/metabolism , Butanols/metabolism , Butyrates/analysis , Calcium Carbonate , Fermentation , Glucose/metabolism , Hydrogen-Ion Concentration , Mutation/geneticsABSTRACT
CRISPR-Cas9 has been explored as a powerful tool for genome engineering for many organisms. Meanwhile, dCas9 which lacks endonuclease activity but can still bind to target loci has been engineered for efficient gene transcription repression. Clostridium beijerinckii, an industrially significant species capable of biosolvent production, is generally difficult to metabolically engineer. Recently, we reported our work in developing customized CRISPR-Cas9 system for genome engineering in C. beijerinckii. However, in many cases, gene expression repression (rather than actual DNA mutation) is more desirable for various biotechnological applications. Here, we further demonstrated gene transcription repression in C. beijerinckii using CRISPR-dCas9. A small RNA promoter was employed to drive the expression of the single chimeric guide RNA targeting on the promoter region of amylase gene, while a constitutive thiolase promoter was used to drive Streptococcus pyogenes dCas9 expression. The growth assay on starch agar plates showed qualitatively significant repression of amylase activity in C. beijerinckii transformant with CRISPR-dCas9 compared to the control strain. Further amylase activity quantification demonstrated consistent repression (65-97% through the fermentation process) on the activity in the transformant with CRISPR-dCas9 versus in the control. Our results provided essential references for engineering CRISPR-dCas9 as an effective tool for tunable gene transcription repression in diverse microorganisms. Biotechnol. Bioeng. 2016;113: 2739-2743. © 2016 Wiley Periodicals, Inc.
Subject(s)
Amylases/genetics , Clustered Regularly Interspaced Short Palindromic Repeats/genetics , Epigenetic Repression/genetics , Transcription, Genetic/genetics , Transcriptional Activation/genetics , Amylases/biosynthesis , CRISPR-Associated Proteins/genetics , Clostridium beijerinckii/genetics , Down-Regulation/genetics , Gene Expression Regulation, Bacterial/geneticsABSTRACT
CRISPR-Cas9 has been demonstrated as a transformative genome engineering tool for many eukaryotic organisms; however, its utilization in bacteria remains limited and ineffective. Here we explored Streptococcus pyogenes CRISPR-Cas9 for genome editing in Clostridium beijerinckii (industrially significant but notorious for being difficult to metabolically engineer) as a representative attempt to explore CRISPR-Cas9 for genome editing in microorganisms that previously lacked sufficient genetic tools. By combining inducible expression of Cas9 and plasmid-borne editing templates, we successfully achieved gene deletion and integration with high efficiency in single steps. We further achieved single nucleotide modification by applying innovative two-step approaches, which do not rely on availability of Protospacer Adjacent Motif sequences. Severe vector integration events were observed during the genome engineering process, which is likely difficult to avoid but has never been reported by other researchers for the bacterial genome engineering based on homologous recombination with plasmid-borne editing templates. We then further successfully employed CRISPR-Cas9 as an efficient tool for selecting desirable "clean" mutants in this study. The approaches we developed are broadly applicable and will open the way for precise genome editing in diverse microorganisms.
Subject(s)
CRISPR-Cas Systems , Clostridium beijerinckii/genetics , Genetic Engineering/methods , DNA Breaks, Double-Stranded , Gene Deletion , Gene Editing , Genetic Vectors , Genome, Bacterial , Homologous Recombination , Nucleotides/genetics , Plasmids , Promoter Regions, Genetic , RNA, Guide, KinetoplastidaABSTRACT
The anaerobic spore-forming, gram-positive, solventogenic clostridia are notorious for being difficult to genetically engineer. Based on CRISPR/Cas9 assisted homologous recombination, we demonstrated that clean markerless gene deletion from the chromosome can be easily achieved with a high efficiency through a single-step transformation in Clostridium beijerinckii NCIMB 8052, one of the most prominent strains for acetone, butanol and ethanol (ABE) production. This highly efficient genome engineering system can be further explored for multiplex genome engineering purposes. The protocols and principles developed in this study provided valuable references for genome engineering in other microorganisms lacking developed genetic engineering tools.
Subject(s)
Clostridium beijerinckii/genetics , Clustered Regularly Interspaced Short Palindromic Repeats , Gene Deletion , Chromosomes, Bacterial , Genes, Bacterial , Genetic Engineering , Genome, BacterialABSTRACT
BACKGROUND: Butanol (n-butanol) has high values as a promising fuel source and chemical feedstock. Biobutanol is usually produced by the solventogenic clostridia through a typical biphasic (acidogenesis and solventogenesis phases) acetone-butanol-ethanol (ABE) fermentation process. It is well known that the acids produced in the acidogenic phase are significant and play important roles in the switch to solventogenesis. However, the mechanism that triggers the metabolic switch is still not clear. RESULTS: Sodium butyrate (40 mM) was supplemented into the medium for the ABE fermentation with Clostridium beijerinckii NCIMB 8052. With butyrate addition (reactor R1), solvent production was triggered early in the mid-exponential phase and completed quickly in < 50 h, while in the control (reactor R2), solventogenesis was initiated during the late exponential phase and took > 90 h to complete. Butyrate supplementation led to 31% improvement in final butanol titer, 58% improvement in sugar-based yield, and 133% improvement in butanol productivity, respectively. The butanol/acetone ratio was 2.4 versus 1.8 in the control, indicating a metabolic shift towards butanol production due to butyrate addition. Genome-wide transcriptional dynamics was investigated with RNA-Seq analysis. In reactor R1, gene expression related to solventogenesis was induced about 10 hours earlier when compared to that in reactor R2. Although the early sporulation genes were induced after the onset of solventogenesis in reactor R1 (mid-exponential phase), the sporulation events were delayed and uncoupled from the solventogenesis. In contrast, in reactor R2, sporulation genes were induced at the onset of solventogenesis, and highly expressed through the solventogenesis phase. The motility genes were generally down-regulated to lower levels prior to stationary phase in both reactors. However, in reactor R2 this took much longer and gene expression was maintained at comparatively higher levels after entering stationary phase. CONCLUSIONS: Supplemented butyrate provided feedback inhibition to butyrate formation and may be re-assimilated through the reversed butyrate formation pathway, thus resulting in an elevated level of intracellular butyryl phosphate, which may act as a phosphate donor to Spo0A and then trigger solventogenesis and sporulation events. High-resolution genome-wide transcriptional analysis with RNA-Seq revealed detailed insights into the biochemical effects of butyrate on solventogenesis related-events at the gene regulation level.
ABSTRACT
Clostridium beijerinckii is a well-known solvent-producing microorganism with great potential for biofuel and biochemical production. To better understand and improve the biochemical pathway to solvents, the development of genetic tools for engineering C. beijerinckii is highly desired. Based on mobile group II intron technology, a targetron gene knockout system was developed for C. beijerinckii in this study. This system was successfully employed to disrupt acid production pathways in C. beijerinckii, leading to pta (encoding phosphotransacetylase)- and buk (encoding butyrate kinase)-negative mutants. In addition to experimental characterization, the mutant phenotypes were analyzed in the context of our C. beijerinckii genome-scale model. Compared to those of the parental strain (C. beijerinckii 8052), acetate production in the pta mutant was substantially reduced and butyrate production was remarkably increased, while solvent production was dependent on the growth medium. The pta mutant also produced much higher levels of lactate, suggesting that disrupting pta influenced the energy generation and electron flow pathways. In contrast, acetate and butyrate production in the buk mutant was generally similar to that of the wild type, but solvent production was consistently 20 to 30% higher and glucose consumption was more rapid and complete. Our results suggest that the acid and solvent production of C. beijerinckii can be effectively altered by disrupting the acid production pathways. As the gene disruption method developed in this study does not leave any antibiotic marker in a disrupted allele, multiple and high-throughput gene disruption is feasible for elucidating genotype and phenotype relationships in C. beijerinckii.
Subject(s)
Carboxylic Acids/metabolism , Clostridium beijerinckii/genetics , Clostridium beijerinckii/metabolism , Gene Knockout Techniques/methods , Introns , Metabolic Networks and Pathways/genetics , Culture Media/chemistry , Metabolic Engineering/methods , Solvents/metabolismABSTRACT
BACKGROUND: Clostridium beijerinckii is a prominent solvent-producing microbe that has great potential for biofuel and chemical industries. Although transcriptional analysis is essential to understand gene functions and regulation and thus elucidate proper strategies for further strain improvement, limited information is available on the genome-wide transcriptional analysis for C. beijerinckii. RESULTS: The genome-wide transcriptional dynamics of C. beijerinckii NCIMB 8052 over a batch fermentation process was investigated using high-throughput RNA-Seq technology. The gene expression profiles indicated that the glycolysis genes were highly expressed throughout the fermentation, with comparatively more active expression during acidogenesis phase. The expression of acid formation genes was down-regulated at the onset of solvent formation, in accordance with the metabolic pathway shift from acidogenesis to solventogenesis. The acetone formation gene (adc), as a part of the sol operon, exhibited highly-coordinated expression with the other sol genes. Out of the > 20 genes encoding alcohol dehydrogenase in C. beijerinckii, Cbei_1722 and Cbei_2181 were highly up-regulated at the onset of solventogenesis, corresponding to their key roles in primary alcohol production. Most sporulation genes in C. beijerinckii 8052 demonstrated similar temporal expression patterns to those observed in B. subtilis and C. acetobutylicum, while sporulation sigma factor genes sigE and sigG exhibited accelerated and stronger expression in C. beijerinckii 8052, which is consistent with the more rapid forespore and endspore development in this strain. Global expression patterns for specific gene functional classes were examined using self-organizing map analysis. The genes associated with specific functional classes demonstrated global expression profiles corresponding to the cell physiological variation and metabolic pathway switch. CONCLUSIONS: The results from this work provided insights for further C. beijerinckii strain improvement employing system biology-based strategies and metabolic engineering approaches.
Subject(s)
Clostridium beijerinckii/genetics , Gene Expression Profiling/methods , Genomics/methods , High-Throughput Nucleotide Sequencing/methods , RNA, Bacterial/genetics , Sequence Analysis, RNA/methods , Transcription, Genetic/genetics , Anaerobiosis/genetics , Biological Transport/genetics , Carbohydrate Metabolism/genetics , Clostridium beijerinckii/cytology , Clostridium beijerinckii/metabolism , Clostridium beijerinckii/physiology , Fatty Acids/metabolism , Fermentation , Genetic Engineering , Glycolysis/genetics , Kinetics , Quorum Sensing/genetics , Spores, Bacterial/genetics , Spores, Bacterial/physiologyABSTRACT
BACKGROUND: Clostridium beijerinckii is an important solvent producing microorganism. The genome of C. beijerinckii NCIMB 8052 has recently been sequenced. Although transcriptome structure is important in order to reveal the functional and regulatory architecture of the genome, the physical structure of transcriptome for this strain, such as the operon linkages and transcript boundaries are not well understood. RESULTS: In this study, we conducted a single-nucleotide resolution analysis of the C. beijerinckii NCIMB 8052 transcriptome using high-throughput RNA-Seq technology. We identified the transcription start sites and operon structure throughout the genome. We confirmed the structure of important gene operons involved in metabolic pathways for acid and solvent production in C. beijerinckii 8052, including pta-ack, ptb-buk, hbd-etfA-etfB-crt (bcs) and ald-ctfA-ctfB-adc (sol) operons; we also defined important operons related to chemotaxis/motility, transcriptional regulation, stress response and fatty acids biosynthesis along with others. We discovered 20 previously non-annotated regions with significant transcriptional activities and 15 genes whose translation start codons were likely mis-annotated. As a consequence, the accuracy of existing genome annotation was significantly enhanced. Furthermore, we identified 78 putative silent genes and 177 putative housekeeping genes based on normalized transcription measurement with the sequence data. We also observed that more than 30% of pseudogenes had significant transcriptional activities during the fermentation process. Strong correlations exist between the expression values derived from RNA-Seq analysis and microarray data or qRT-PCR results. CONCLUSIONS: Transcriptome structural profiling in this research provided important supplemental information on the accuracy of genome annotation, and revealed additional gene functions and regulation in C. beijerinckii.
Subject(s)
Clostridium beijerinckii/genetics , Sequence Analysis, RNA , Transcriptome , Clostridium beijerinckii/growth & development , Gene Expression Regulation, Bacterial , Reverse Transcriptase Polymerase Chain ReactionABSTRACT
Mixed sugars from tropical maize stalk juice were used to carry out butanol fermentation with Clostridium beijerinckii NCIMB 8052. Batch experiments employing central composite design (CCD) and response surface methodology (RSM) optimization were performed to evaluate effects of three factors, i.e. pH, initial total sugar concentration, and agitation rate on butanol production. Optimum conditions of pH 6.7, sugar concentration 42.2g/L and agitation rate 48 rpm were predicted, under which a maximum butanol yield of 0.27 g/g-sugar was estimated. Further experiments demonstrated that higher agitation facilitated acetone production, leading to lower butanol selectivity in total acetone-butanol-ethanol (ABE). While glucose and fructose are more preferable by C. beijerinckii, sucrose can also be easily degraded by the microorganism. This study indicated that RSM is a useful approach for optimizing operational conditions for butanol production, and demonstrated that tropical maize, with high yield of biomass and stalk sugars, is a promising biofuel crop.
Subject(s)
Biotechnology/methods , Butanols/chemical synthesis , Clostridium beijerinckii/metabolism , Fermentation/physiology , Tropical Climate , Waste Products/analysis , Zea mays/chemistry , Acetone/metabolism , Carbohydrate Metabolism/drug effects , Carbohydrates/pharmacology , Clostridium beijerinckii/drug effects , Fermentation/drug effects , Hydrogen-Ion Concentration/drug effects , Regression Analysis , Reproducibility of Results , SolventsABSTRACT
BACKGROUND: Solventogenic clostridia offer a sustainable alternative to petroleum-based production of butanol--an important chemical feedstock and potential fuel additive or replacement. C. beijerinckii is an attractive microorganism for strain design to improve butanol production because it (i) naturally produces the highest recorded butanol concentrations as a byproduct of fermentation; and (ii) can co-ferment pentose and hexose sugars (the primary products from lignocellulosic hydrolysis). Interrogating C. beijerinckii metabolism from a systems viewpoint using constraint-based modeling allows for simulation of the global effect of genetic modifications. RESULTS: We present the first genome-scale metabolic model (iCM925) for C. beijerinckii, containing 925 genes, 938 reactions, and 881 metabolites. To build the model we employed a semi-automated procedure that integrated genome annotation information from KEGG, BioCyc, and The SEED, and utilized computational algorithms with manual curation to improve model completeness. Interestingly, we found only a 34% overlap in reactions collected from the three databases--highlighting the importance of evaluating the predictive accuracy of the resulting genome-scale model. To validate iCM925, we conducted fermentation experiments using the NCIMB 8052 strain, and evaluated the ability of the model to simulate measured substrate uptake and product production rates. Experimentally observed fermentation profiles were found to lie within the solution space of the model; however, under an optimal growth objective, additional constraints were needed to reproduce the observed profiles--suggesting the existence of selective pressures other than optimal growth. Notably, a significantly enriched fraction of actively utilized reactions in simulations--constrained to reflect experimental rates--originated from the set of reactions that overlapped between all three databases (P = 3.52 × 10-9, Fisher's exact test). Inhibition of the hydrogenase reaction was found to have a strong effect on butanol formation--as experimentally observed. CONCLUSIONS: Microbial production of butanol by C. beijerinckii offers a promising, sustainable, method for generation of this important chemical and potential biofuel. iCM925 is a predictive model that can accurately reproduce physiological behavior and provide insight into the underlying mechanisms of microbial butanol production. As such, the model will be instrumental in efforts to better understand, and metabolically engineer, this microorganism for improved butanol production.
Subject(s)
Bioreactors , Clostridium beijerinckii/metabolism , Genome, Bacterial/genetics , Industrial Microbiology/methods , Metabolic Networks and Pathways/physiology , Models, Biological , Systems Biology/methods , Butanols/metabolism , Clostridium beijerinckii/genetics , Computer Simulation , Fermentation , Hexoses/metabolism , Pentoses/metabolismABSTRACT
Anaerobic bacteria such as the solventogenic clostridia can ferment a wide range of carbon sources (e.g., glucose, galactose, cellobiose, mannose, xylose, and arabinose) to produce carboxylic acids (acetic and butyric) and solvents such as acetone, butanol, and ethanol (ABE). The fermentation process typically proceeds in two phases (acidogenic and solventogenic) in a batch mode. Poor solvent resistance by the solventogenic clostridia and other fermenting microorganisms is a major limiting factor in the profitability of ABE production by fermentation. The toxic effect of solvents, especially butanol, limits the concentration of these solvents in the fermentation broth, limiting solvent yields and adding to the cost of solvent recovery from dilute solutions. The accepted dogma is that toxicity in the ABE fermentation is due to chaotropic effects of butanol on the cell membranes of the fermenting microorganisms, which poses a challenge for the biotechnological whole-cell bio-production of butanol. This mini-review is focused on (1) the effects of solvents on inhibition of cell metabolism (nutrient transport, ion transport, and energy metabolism); (2) cell membrane fluidity, death, and solvent tolerance associated with the ability of cells to tolerate high concentrations of solvents without significant loss of cell function; and (3) strategies for overcoming poor solvent resistance in acetone and butanol-producing microorganisms.
Subject(s)
Acetone/metabolism , Biotechnology , Butanols/metabolism , Clostridium/metabolism , Fermentation , Solvents/metabolism , Cell Membrane/metabolism , Clostridium/genetics , Clostridium/growth & development , Membrane Fluidity/geneticsABSTRACT
Clostridium beijerinckii is an anaerobic bacterium used for the fermentative production of acetone and butanol. The recent availability of genomic sequence information for C. beijerinckii NCIMB 8052 has allowed for an examination of gene expression during the shift from acidogenesis to solventogenesis over the time course of a batch fermentation using a ca. 500-gene set DNA microarray. The microarray was constructed using a collection of genes which are orthologs of members of gene families previously found to be important to the physiology of C. acetobutylicum ATCC 824. Similar to the onset of solventogenesis in C. acetobutylicum 824, the onset of solventogenesis in C. beijerinckii 8052 was concurrent with the initiation of sporulation. However, forespores and endospores developed more rapidly in C. beijerinckii 8052 than in C. acetobutylicum 824, consistent with the accelerated expression of the sigE- and sigG-regulated genes in C. beijerinckii 8052. The comparison of gene expression patterns and morphological changes in C. beijerinckii 8052 and the hyper-butanol-producing C. beijerinckii strain BA101 indicated that BA101 was less efficient in sporulation and phosphotransferase system-mediated sugar transport than 8052 but that it exhibited elevated expression of several primary metabolic genes and chemotaxis/motility genes.
Subject(s)
Acetone/metabolism , Butanols/metabolism , Clostridium beijerinckii/genetics , Clostridium beijerinckii/metabolism , Fermentation , Gene Expression Profiling , Gene Expression Regulation, Bacterial , Clostridium beijerinckii/cytology , Oligonucleotide Array Sequence Analysis , Spores, Bacterial/growth & developmentABSTRACT
Pretreatment and hydrolysis of lignocellulosic biomass using either dilute acid, liquid hot water (LHW), or ammonium fiber expansion (AFEX) results in a complex mixture of sugars such as hexoses (glucose, galactose, mannose), and pentoses (xylose, arabinose). A detailed description of the utilization of representative mixed sugar streams (pentoses and hexoses) and their sugar preferences by the solventogenic clostridia (Clostridium beijerinckii BA101, C. acetobutylicum 260, C. acetobutylicum 824, Clostridium saccharobutylicum 262, and C. butylicum 592) is presented. In these experiments, all the sugars were utilized concurrently throughout the fermentation, although the rate of sugar utilization was sugar specific. For all clostridia tested, the rate of glucose utilization was higher than for the other sugars in the mixture. In addition, the availability of excess fermentable sugars in the bioreactor is necessary for both the onset and the maintenance of solvent production otherwise the fermentation will become acidogenic leading to premature termination of the fermentation process. During an investigation on the effect of some of the known lignocellulosic hydrolysate inhibitors on the growth and ABE production by clostridia, ferulic and p-coumaric acids were found to be potent inhibitors of growth and ABE production. Interestingly, furfural and HMF were not inhibitory to the solventogenic clostridia; rather they had a stimulatory effect on growth and ABE production at concentrations up to 2.0g/L.
Subject(s)
Clostridium/metabolism , Fermentation , Industrial Waste , Solvents/metabolism , Zea mays/metabolism , 1-Butanol/chemical synthesis , Acetone/chemical synthesis , Clostridium/cytology , Clostridium/growth & development , Ethanol/chemistry , Ethanol/metabolism , Hydrolysis , Monosaccharides/metabolism , SolubilityABSTRACT
Fermentation of sulfuric acid treated corn fiber hydrolysate (SACFH) inhibited cell growth and butanol production (1.7+/-0.2g/L acetone butanol ethanol or ABE) by Clostridium beijerinckii BA101. Treatment of SACFH with XAD-4 resin removed some of the inhibitors resulting in the production of 9.3+/-0.5 g/L ABE and a yield of 0.39+/-0.015. Fermentation of enzyme treated corn fiber hydrolysate (ETCFH) did not reveal any cell inhibition and resulted in the production of 8.6+/-1.0 g/L ABE and used 24.6g/L total sugars. ABE production from fermentation of 25 g/L glucose and 25 g/L xylose was 9.9+/-0.4 and 9.6+/-0.4 g/L, respectively, suggesting that the culture was able to utilize xylose as efficiently as glucose. Production of only 9.3+/-0.5 g/L ABE (compared with 17.7 g/L ABE from fermentation of 55 g/L glucose-control) from the XAD-4 treated SACFH suggested that some fermentation inhibitors may still be present following treatment. It is suggested that inhibitory components be completely removed from the SACFH prior to fermentation with C. beijerinckii BA101. In our fermentations, an ABE yield ranging from 0.35 to 0.39 was obtained, which is higher than reported by the other investigators.
Subject(s)
Butanols/metabolism , Clostridium beijerinckii/metabolism , Hydrolases/metabolism , Zea mays/enzymology , Acetone/metabolism , Ethanol/metabolism , Fermentation , Hydrolysis , Industrial Microbiology , Kinetics , Plant Structures/metabolismABSTRACT
A potential industrial substrate (liquefied corn starch; LCS) has been employed for successful acetone butanol ethanol (ABE) production. Fermentation of LCS (60 g l(-1)) in a batch process resulted in the production of 18.4 g l(-1) ABE, comparable to glucose: yeast extract based medium (control experiment, 18.6 g l(-1) ABE). A batch fermentation of LCS integrated with product recovery resulted in 92% utilization of sugars present in the feed. When ABE was recovered by gas stripping (to relieve inhibition) from the fed-batch reactor fed with saccharified liquefied cornstarch (SLCS), 81.3 g l(-1) ABE was produced compared to 18.6 g l(-1) (control). In this integrated system, 225.8 g l(-1) SLCS sugar (487 % of control) was consumed. In the absence of product removal, it is not possible for C. beijerinckii BA101 to utilize more than 46 g l(-1) glucose. A combination of fermentation of this novel substrate (LCS) to butanol together with product recovery by gas stripping may economically benefit this fermentation.