ABSTRACT
We provide a historical and technical perspective on the evolution of Kambin's triangle as a safe working corridor for percutaneous access to the intervertebral disc to an anatomically expanded space to accommodate and facilitate open lumbar total joint replacement. The nearly 6-decade progression from intradiscal access in the intact lumbar spine to an enlarged working space following facetectomy to accommodate a transforaminal lumbar interbody fusion, and eventual further expansion via pedicle vertebral body osteotomy to support motion preservation with total joint replacement, represents a unique evolutionary pathway in surgical technique development. For each of these steps in evolution, we detail and provide the historical context of the corresponding surgical modifications required to expand the original anatomical boundaries of Kambin's triangle. It is postulated that the introduction of machine learning technologies coupled with innovations in robotics, materials science, and advanced imaging will further accelerate and refine the adaptation of more complex, precise, and efficacious surgical procedures to treat spinal degeneration via this working corridor.
ABSTRACT
While achieving premarket approval from the US Food and Drug Administration represents a significant milestone in the development and commercialization of a Class III medical device, the aftermath endeavor of gaining market access can be daunting. This article provides a case study of the Barricaid annular closure device (Barricaid), a reherniation reduction device, which has been demonstrated to decrease the risk of suffering a recurrent lumbar intervertebral disc herniation. Following Food and Drug Administration approval, clinical adoption has been slow due to barriers to market access, including the perception of low-quality clinical evidence, questionable significance of the medical necessity of the procedure, and imaging evidence of increased likelihood of vertebral endplate changes. The aim of this article is to provide appropriate examination, rationale, and rebuttal of these concerns. Weighing the compendium of evidence, we offer a definition of a separate and unique current procedural terminology code to delineate this procedure. Adoption of this code will help to streamline the processing of claims and support the conduct of research, the evaluation of health care utilization, and the development of appropriate medical guidelines.
ABSTRACT
Specific clinical diagnostic criteria have established a consensus for defining patients with lumbar discogenic pain. However, if conservative medical management fails, these patients have few treatment options short of surgery involving discectomy often coupled with fusion or arthroplasty. There is a rapidly-emerging research effort to fill this treatment gap with intradiscal therapies that can be delivered minimally-invasively via fluoroscopically guided injection without altering the normal anatomy of the affected vertebral motion segment. Viable candidate products to date have included mesenchymal stromal cells, platelet-rich plasma, nucleus pulposus structural allograft, and other cell-based compositions. The objective of these products is to repair, supplement, and restore the damaged intervertebral disc as well as retard further degeneration. In doing so, the intervention is meant to eliminate the source of discogenic pain and avoid surgery. Methodologically rigorous studies are rare, however, and based on the best clinical evidence, the safety as well as the magnitude and duration of clinical efficacy remain difficult to estimate. Further, we summarize the US Food and Drug Administration's (FDA) guidance regarding the interpretation of the minimal manipulation and homologous use criteria, which is central to designating these products as a tissue or as a drug/device/biologic. We also provide perspectives on the core evidence and knowledge gaps associated with intradiscal therapies, propose imperatives for evaluating effectiveness of these treatments and highlight several new technologies on the horizon.
ABSTRACT
Professor Sir John Charnley has been rightfully hailed as a visionary innovator for conceiving, designing, and validating the Operation of the Century-the total hip arthroplasty. His groundbreaking achievement forever changed the orthopedic management of chronically painful and dysfunctional arthritic joints. However, the well-accepted surgical approach of completely removing the diseased joint and replacing it with a durable and anatomically based implant never translated to the treatment of the degenerated spine. Instead, decompression coupled with fusion evolved into the workhorse intervention. In this commentary, the authors explore the reasons why arthrodesis has remained the mainstay over arthroplasty in the field of spine surgery as well as discuss the potential shift in the paradigm when it comes to treating degenerative lumbar disease.
ABSTRACT
PURPOSE: Intraoperative bulbocavernosus reflex neuromonitoring has been utilized to protect bowel, bladder, and sexual function, providing a continuous functional assessment of the somatic sacral nervous system during surgeries where it is at risk. Bulbocavernosus reflex data may also provide additional functional insight, including an evaluation for spinal shock, distinguishing upper versus lower motor neuron injury (conus vs. cauda syndromes) and prognosis for postoperative bowel and bladder function. Continuous intraoperative bulbocavernosus reflex monitoring has been utilized to provide the surgeon with an ongoing functional assessment of the anatomical elements involved in the S2-S4 mediated reflex arc including the conus, cauda equina and pudendal nerves. Intraoperative bulbocavernosus reflex monitoring typically includes the electrical activation of the dorsal nerves of the genitals to initiate the afferent component of the reflex, followed by recording the resulting muscle response using needle electromyography recordings from the external anal sphincter. METHODS: Herein we describe a complementary and novel technique that includes recording electromyography responses from the external urethral sphincter to monitor the external urethral sphincter reflex. Specialized foley catheters embedded with recording electrodes have recently become commercially available that provide the ability to perform intraoperative external urethral sphincter muscle recordings. RESULTS: We describe technical details and the potential utility of incorporating external urethral sphincter reflex recordings into existing sacral neuromonitoring paradigms to provide redundant yet complementary data streams. CONCLUSIONS: We present two illustrative neurosurgical oncology cases to demonstrate the utility of the external urethral sphincter reflex technique in the setting of the necessary surgical sacrifice of sacral nerve roots.
ABSTRACT
The primary objective of this review is to evaluate whether the degree of processing and the clinical utility of commercially available mineralized bone allografts for spine surgery meet the 2020 US Food and Drug Administration's (FDA) guideline definitions for minimal manipulation and homologous use, respectively. We also assessed the consistency of performance of these products by examining the comparative postoperative radiographic fusion rates following spine surgery. Based on the FDA's criteria for determining whether a structural allograft averts regulatory oversight and classification as a drug/device/biologic, mineralized bone allografts were judged to meet the Agency's definitional descriptions for minimal manipulation and homologous use when complying with the American Association of Tissue Banks' (AATB) accredited guidelines for bone allograft harvesting, processing, storing and transplanting. Thus, these products do not require FDA medical device clearance. Radiographic fusion rates achieved with mineralized bone allografts were uniformly high (>85%) across three published systematic reviews. Little variation was found in the fusion rates irrespective of anatomical location, allograft geometry, dimensions or indication, and in most cases, the rates were similar to those for autologous bone alone. Continued utilization of mineralized bone allografts should be encouraged across all spine surgery applications where supplemental grafts and/or segmental stability are required to support mechanically solid arthrodeses.
ABSTRACT
(1) Background: Minimally invasive sacroiliac joint (SIJ) fusion is the preferred surgical intervention to treat chronically severe pain associated with SIJ degeneration and dysfunction. (2) Methods: This paper details the ten-step surgical procedure associated with the postero-inferior approach using the PsiF™ DNA Sacroiliac Joint Fusion System. (3) Results: The posterior surgical approach with an inferior operative trajectory (postero-inferior) utilizes easily identifiable landmarks to provide the safest, most direct access to the articular joint space for transfixing device placement. Implanting the device through the subchondral bone provides maximum fixation and stabilization of the joint by utilizing an optimal amount of cortical bone-implant interface. Approaching the joint from the inferior trajectory also places the implant perpendicular to the S1 endplate at a "pivot point" near the sacral axis of rotation, which addresses the most significant motion of the joint. (4) Conclusions: Further observational data from real-world clinical use are encouraged to further validate this procedure as the surgical preference for minimally invasive SIJ fusion.
ABSTRACT
There is an enormous body of literature that has identified the intervertebral disc as a potent pain generator. However, with regard to lumbar degenerative disc disease, the specific diagnostic criteria lack clarity and fail to capture the primary components which include axial midline low back pain with or without non-radicular/non-sciatic referred leg pain in a sclerotomal distribution. In fact, there is no specific ICD-10-CM diagnostic code to classify and define discogenic pain as a unique source of pain distinct from other recognized sources of chronic low back pain including facetogenic, neurocompressive including herniation and/or stenosis, sacroiliac, vertebrogenic, and psychogenic. All of these other sources have well-defined ICD-10-CM codes. Corresponding codes for discogenic pain remain absent from the diagnostic coding vernacular. The International Society for the Advancement of Spine Surgery (ISASS) has proposed a modernization of ICD-10-CM codes to specifically define pain associated with lumbar and lumbosacral degenerative disc disease. The proposed codes would also allow the pain to be characterized by location: lumbar region only, leg only, or both. Successful implementation of these codes would benefit both physicians and payers in distinguishing, tracking, and improving algorithms and treatments for discogenic pain associated with intervertebral disc degeneration.
ABSTRACT
The primary objective was to compare the subsidence resistance properties of a novel 3D-printed spinal interbody titanium implant versus a predicate polymeric annular cage. We evaluated a 3D-printed spinal interbody fusion device that employs truss-based bio-architectural features to apply the snowshoe principle of line length contact to provide efficient load distribution across the implant/endplate interface as means of resisting implant subsidence. Devices were tested mechanically using synthetic bone blocks of differing densities (osteoporotic to normal) to determine the corresponding resistance to subsidence under compressive load. Statistical analyses were performed to compare the subsidence loads and evaluate the effect of cage length on subsidence resistance. The truss implant demonstrated a marked rectilinear increase in resistance to subsidence associated with increase in the line length contact interface that corresponds with implant length irrespective of subsidence rate or bone density. In blocks simulating osteoporotic bone, comparing the shortest with the longest length truss cage (40 vs. 60 mm), the average compressive load necessary to induce subsidence of the implant increased by 46.4% (383.2 to 561.0 N) and 49.3% (567.4 to 847.2 N) for 1 and 2 mm of subsidence, respectively. In contrast, for annular cages, there was only a modest increase in compressive load when comparing the shortest with the longest length cage at a 1 mm subsidence rate. The Snowshoe truss cages demonstrated substantially more resistance to subsidence than corresponding annular cages. Clinical studies are required to support the biomechanical findings in this work.
Subject(s)
Prostheses and Implants , Spinal Fusion , Spine , Bone Density , Pressure , Lumbar Vertebrae/surgeryABSTRACT
(1) Background: The clinical benefits and procedural efficiencies of performing minimally invasive fusion procedures, such as transforaminal lumbar interbody fusion (TLIF), in the ambulatory surgery center (ASC) are becoming increasingly well established. Currently, Medicare does not provide reimbursement for its beneficiaries eligible for TLIF in the ASC due to a lack of evidence regarding procedural safety. However, the initiation of the Hospital Without Walls program allowed for traditional hospital procedures to be relocated to other facilities such as ASCs, providing a unique opportunity to evaluate the utility of TLIF in the ASC in Medicare-age patients. (2) Methods: This single-center, retrospective study compared baseline characteristics, intraoperative variables, and 30-day postoperative safety outcomes between 48 Medicare-age patients undergoing TLIF in the ASC and 48 patients having the same procedure as hospital in-patients. All patients had a one-level TLIF using the VariLift®-LX expandable lumbar interbody fusion device. (3) Results: There were similar patient characteristics, procedural efficiency, and occurrence of clinical 30-day safety events between the two study groups. However, there was a marked and statistically significant difference in the median length of stay favoring TLIF patients treated in the ASC (23.9 h vs. 1.6 h, p = 0.001). All ASC-treated patients were discharged on the day of surgery. Postoperative visits to address adverse events were rare in either group. (4) Conclusions: These findings provide evidence that minimally invasive TLIF can be performed safely and efficiently in the ASC in Medicare-age patients. With same-day discharge, fusion procedures performed in the ASC offer a similar safety and more attractive cost-benefit profile for older patients than the same surgery undertaken in the traditional hospital setting. The Centers for Medicare and Medicaid Services should strongly consider extending the appropriate reimbursement codes (CPT ® 22630, 22633) for minimally invasive TLIF and PLIF to the ASC Covered Procedure List so that Medicare-age patients can realize the clinical benefits of surgeries performed in this setting.
ABSTRACT
(1) Background: The technological advances achieved with minimally-invasive surgery have enabled procedures to be undertaken in outpatient settings, and there has been growing acceptance of performing minimally-invasive transforaminal interbody fusion (TLIF) in the ambulatory surgery center (ASC). The purposeof this study was to determine the comparative 30 day safety profile for patients treated with TLIF in the ASC versus the hospital setting. (2) Methods: This multi-center study retrospectively collected baseline characteristics, perioperative variables, and 30 day postoperative safety outcomes for patients having a TLIF using the VariLift®-LX expandable lumbar interbody fusion device. Outcomes were compared between patients undergoing TLIF in the ASC (n = 53) versus in the hospital (n = 114). (3) Results: Patients treated in-hospital were significantly older, frailer and more likely to have had previous spinal surgery than ASC patients. Preoperative back and leg pain scores were similar between study groups (median, 7). ASC patients had almost exclusively one-level procedures (98%) vs. 20% of hospital procedures involving two-levels (p = 0.004). Most procedures (>90%) employed a stand-alone device. The median length of stay for hospital patients was five times greater than for ASC patients (1.4 days vs. 0.3 days, p = 0.001). Emergency department visits, re-admissions and reoperations were rare whether the patients were managed in the traditional hospital setting or the ASC. (4) Conclusions: There were equivalent 30 day postoperative safety profiles for patients undergoing a minimally-invasive TLIF irrespective of surgical setting. For appropriately selected surgical candidates, the ASC offers a viable and attractive option for their TLIF procedure with the advantage of same-day discharge and at-home recovery.
ABSTRACT
Minimally invasive sacroiliac joint (SIJ) fusion is the preferred surgical method for managing patients with recalcitrant, chronically severe SIJ pain and dysfunction refractory to conservative medical measures. The primary surgical objective of all minimally invasive SIJ fusion procedures is to provide immediate stabilization within the joint space to support osseous consolidation and the development of a mechanically solid arthrodesis. The intra-articular surgical approach to the SIJ with allograft bone placement utilizes a trajectory and easily identifiable landmarks that allow the surgeon to control the risk of violating important neuro-vascular structures. The intra-articular approach can employ a superior or inferior operative trajectory, with the former restricted to allograft placement in the ligamentous portion of the SIJ. The inferior approach utilizes decortication to surgically create a channel originating in the purely articular portion of the joint space allowing for truly intra-articular implant placement within the osseous confines of the ilium and sacrum. Positioning the implant along the natural joint line and securing it within the underlying sub-chondral bone, mortise and tenon fashion provides stabilization and large surface area contact at the bone implant interface. The inferior, intra-articular approach also places the implant perpendicular to the S1 endplate, near the sacral axis of rotation, which addresses the most significant biomechanical forces across the joint. Short-term, post-surgical observational data from a 57 patient multi-center registry using the inferior, intra-articular approach show uniform and statistically significant improvement in all clinical outcomes (p < 0.001 for all comparisons), including an average 3-point improvement in back pain severity from 6.8 preoperatively to 3.8 at 6 months. Further clinical evaluation with longer-term follow-up of the inferior, intra-articular SIJ fusion procedure is encouraged.
ABSTRACT
BACKGROUND: Newly-introduced minimally invasive interventions have filled a gap between conservative care and open surgical procedures in the treatment and management of lumbar spinal stenosis (LSS), allowing expanded access to patient care. This spectrum of care involves an important interplay between advanced practice providers, interventional pain physicians, and spine surgeons. OBJECTIVES: Using an integrated team approach starting with history taking; static and dynamic imaging; and conservative care, we developed a simple, understandable clinical algorithm that serves as a foundation for physicians to confidently make objective decisions regarding diagnosing and treating LSS throughout the entire clinical course of the condition. We believe this could potentially lead to more efficient and effective care for patients suffering from LSS with neurogenic claudication. METHODS: A decision tree approach was utilized with "either/or" choices at each branch or node in the algorithm. Activities are divided into examination procedures and corresponding treatment interventions. Symptom and radiographic severity grading as well as assessing clinical status employed published validated standards. Commensurate treatment choices were selected based on published LSS-specific clinical practice guidelines and/or meta-analyses. RESULTS: This algorithm recommends a systematic rule set for LSS diagnostic and treatment options. Initially, LSS symptom severity is graded based on the patient's pain relief with spinal flexion. This is correlated with radiographic severity assessment graded as mild, moderate, or severe. Radiographic severity combined with dynamic imaging prescribes a choice of treatment options and a risk/benefit discussion with the patient. These options include conservative management, minimally invasive methods such as interspinous process decompression, and more invasive surgical procedures such as laminectomy for increasing grades of radiographic severity. LIMITATIONS: Understanding that each patient with LSS is managed on a case-by-case basis, the treatment options recommended by this algorithm should be considered "soft guidance." As such, integrated team/patient consultation is recommended to ensure maximum clinical benefit. A risk/benefit assessment and discussion should be performed with each individual patient. CONCLUSIONS: Our proposed algorithm offers an easy-to-use clinical tool and general foundation for identifying, evaluating, and treating patients with intermittent neurogenic claudication associated with LSS.
Subject(s)
Spinal Stenosis , Humans , Spinal Stenosis/diagnosis , Spinal Stenosis/surgery , Decompression, Surgical/methods , Back Pain/surgery , Lumbar Vertebrae/surgery , AlgorithmsABSTRACT
BACKGROUND CONTEXT: The transpsoas lateral lumbar interbody fusion (LLIF) technique is an effective alternative to traditional anterior and posterior approaches to the lumbar spine; however, nerve injuries are the most reported postoperative complication. Commonly used strategies to avoid nerve injury (eg, limiting retraction duration) have not been effective in detecting or preventing femoral nerve injuries. PURPOSE: To evaluate the efficacy of emerging intraoperative femoral nerve monitoring techniques and the importance of employing prompt surgical countermeasures when degraded femoral nerve function is detected. STUDY DESIGN/SETTING: We present the results from a retrospective analysis of a multi-center study conducted over the course of 3 years. PATIENT SAMPLE: One hundred and seventy-two lateral lumbar interbody fusion procedures were reviewed. OUTCOME MEASURES: Intraoperative femoral nerve monitoring data was correlated to immediate postoperative neurologic examinations. METHODS: Femoral nerve evoked potentials (FNEP) including saphenous nerve somatosensory evoked potentials (snSSEP) and motor evoked potentials with quadriceps recordings were used to detect evidence of degraded femoral nerve function during the time of surgical retraction. RESULTS: In 89% (n=153) of the surgeries, there were no surgeon alerts as the FNEP response amplitudes remained relatively unchanged throughout the surgery (negative group). The positive group included 11% of the cases (n=19) where the surgeon was alerted to a deterioration of the FNEP amplitudes during surgical retraction. Prompt surgical countermeasures to an FNEP alert included loosening, adjusting, or removing surgical retraction, and/or requesting an increase in blood pressure from the anesthesiologist. All the cases where prompt surgical countermeasures were employed resulted in recovery of the degraded FNEP amplitudes and no postoperative femoral nerve injuries. In two cases, the surgeons were given verbal alerts of degraded FNEPs but did not employ prompt surgical countermeasures. In both cases, the degraded FNEP amplitudes did not recover by the time of surgical closure, and both patients exhibited postoperative signs of sensorimotor femoral nerve injury including anterior thigh numbness and weakened knee extension. CONCLUSIONS: Multimodal femoral nerve monitoring can provide surgeons with a timely alert to hyperacute femoral nerve conduction failure, enabling prompt surgical countermeasures to be employed that can mitigate or avoid femoral nerve injury. Our data also suggests that the common strategy of limiting retraction duration may not be effective in preventing iatrogenic femoral nerve injuries.
Subject(s)
Femoral Nerve , Spinal Fusion , Evoked Potentials, Motor/physiology , Femoral Nerve/injuries , Humans , Lumbar Vertebrae/surgery , Postoperative Complications/diagnosis , Postoperative Complications/etiology , Postoperative Complications/prevention & control , Retrospective Studies , Spinal Fusion/adverse effects , Spinal Fusion/methodsABSTRACT
STUDY DESIGN: Finite element analysis (FEA) and in vivo ovine spinal interbody fusion study. OBJECTIVE: To determine comparative load-induced strain amplitudes, bone mineralization and fusion outcomes associated with different diameter struts in a truss-based interbody fusion device. SUMMARY OF BACKGROUND DATA: Additive manufacturing technology has been employed to develop implants that actively participate in the fusion process. The truss device enables the optimal transfer of compressive and tensile stresses via the struts. Mechanobiologic principles postulate that strut diameter can be regulated to allow different magnitudes of strain distribution within the struts which may affect fusion rates. METHODS: Modeling of strain distributions as a function of strut diameter (0.75, 1.0, 1.25, and 1.5âmm) employed FEA that simulated physiologic loading conditions. A confirmatory in vivo ovine lumbar spinal interbody fusion study compared fusion scores and bone histomorphometric variables for cages with 0.75 and 1.5âmm strut diameters. Outcomes were compared at 3-, 6-, and 12-month follow-up intervals. RESULTS: FEA showed an inverse association between strut diameter and peak strain amplitude. Cages with 1.0, 1.25, and 1.5âmm struts had peak strain values that were 36%, 60%, and 73% lower than the 0.75âmm strut strain value. In vivo results showed the mean fusion score for the 0.75âmm diameter strut cage was significantly greater by 3-months versus the 1.5âmm strut cage, and remained significantly higher at each subsequent interval (Pâ<â0.001 for all comparisons). Fusion rates were 95%, 100%, and 100% (0.75âmm) and 72.7%, 86.4%, and 95.8% (1.5âmm) at 3, 6, and 12âmonths. Thinner struts had greater mineralized bone tissue and less fibrous/chondral tissue than the thicker struts at each follow-up. CONCLUSION: Validating FEA estimates, cages with smaller diameter struts exhibited more rapid fusion consolidation and more aggressive osseointegration compared with cages with larger diameters struts.Level of Evidence: 4.
Subject(s)
Spinal Fusion , Animals , Biomechanical Phenomena , Calcification, Physiologic , Finite Element Analysis , Humans , Lumbar Vertebrae/surgery , Sheep , Spinal Fusion/methodsABSTRACT
With an increasingly aging population globally, a confluence has emerged between the rising prevalence of degenerative spinal disease and osteoporosis. Fusion of the anterior spinal column remains the mainstay surgical intervention for many spinal degenerative disorders. However, decreased vertebral bone mineral density (BMD), quantitatively measured by dual x-ray absorptiometry (DXA), complicates treatment with surgical interbody fusion as weak underlying bone stock increases the risk of post-operative implant-related adverse events, including cage subsidence. There is a necessity for developing cages with advanced structural designs that incorporate bioengineering and architectural principles to tailor the interbody fusion device directly to the patient's BMD status. Specifically, lattice-designed cages that mimic the web-like structure of native cancellous bone have demonstrated excellent resistance to post-operative subsidence. This article provides an introductory profile of a spinal interbody implant designed intentionally to simulate the lattice structure of human cancellous bone, with a similar modulus of elasticity, and specialized to match a patient's bone status across the BMD continuum. The implant incorporates an open pore design where the degree of pore compactness directly corresponds to the patient's DXA-defined BMD status, including patients with osteoporosis.
ABSTRACT
Introduction: Interbody fusion devices are customarily used in fusion of the anterior spinal column for treatment of degenerative disc disease. Their traditional role is to reestablish and maintain intervertebral disc height, contain bone graft and provide mechanical support for the spine while osseointegration takes place. Utilizing the principles of mechanobiology, a unique biokinetic interbody fusion device has been developed that employs an advanced structural design to facilitate and actively participate in the fusion consolidation process.Areas covered: This article profiles and characterizes 4WEB Medical's Truss Implant Technology™ which includes a range of 3D-printed titanium spinal interbody implants and non-spinal implants whose design is based on truss structures enabled by advances in additive manufacturing. Four main areas of the implant design and functionality are detailed: bio-architecture, mechanobiologic underpinnings, bioactive surface features, and subsidence resistance. Pre-clinical and clinical examples are provided to describe and specify the bioactive roles and contributions of each design feature.Expert opinion: The distinct and unique combination of features incorporated within the truss cage design results in a biokinetic implant that actively participates in the bone healing cascade and fusion process.