ABSTRACT
This review discusses opportunities in chemistry that are enabled by the chiral induced spin selectivity (CISS) effect. First, the review begins with a brief overview of the seminal studies on CISS. Next, we discuss different chiral material systems whose properties can be tailored through chemical means, with a special emphasis on hybrid organic-inorganic layered materials that exhibit some of the largest spin filtering properties to date. Then, we discuss the promise of CISS for chemical reactions and enantioseparation before concluding.
ABSTRACT
The chiral induced spin selectivity (CISS) effect, in which the structural chirality of a material determines the preference for the transmission of electrons with one spin orientation over that of the other, is emerging as a design principle for creating next-generation spintronic devices. CISS implies that the spin preference of chiral structures persists upon injection of pure spin currents and can act as a spin analyzer without the need for a ferromagnet. Here, we report an anomalous spin current absorption in chiral metal oxides that manifests a colossal anisotropic nonlocal Gilbert damping with a maximum-to-minimum ratio of up to 1000%. A twofold symmetry of the damping is shown to result from differential spin transmission and backscattering that arise from chirality-induced spin splitting along the chiral axis. These studies reveal the rich interplay of chirality and spin dynamics and identify how chiral materials can be implemented to direct the transport of spin current.
ABSTRACT
This work presents a spectroscopic and photocatalytic comparison of water splitting using yttrium iron garnet (Y3Fe5O12, YIG) and hematite (α-Fe2O3) photoanodes. Despite similar electronic structures, YIG significantly outperforms widely studied hematite, displaying more than an order of magnitude increase in photocurrent density. Probing the charge and spin dynamics by ultrafast, surface-sensitive XUV spectroscopy reveals that the enhanced performance arises from (1) reduced polaron formation in YIG compared to hematite and (2) an intrinsic spin polarization of catalytic photocurrents in YIG. Ultrafast XUV measurements show a reduction in the formation of surface electron polarons compared to hematite due to site-dependent electron-phonon coupling. This leads to spin polarized photocurrents in YIG where efficient charge separation occurs on the Td sub-lattice compared to fast trapping and electron/hole pair recombination on the Oh sub-lattice. These lattice-dependent dynamics result in a long-lived spin aligned hole population at the YIG surface, which is directly observed using XUV magnetic circular dichroism. Comparison of the Fe M2,3 and O L1-edges show that spin aligned holes are hybridized between O 2p and Fe 3d valence band states, and these holes are responsible for highly efficient, spin selective water oxidation by YIG. Together, these results point to YIG as a new platform for highly efficient, spin selective photocatalysis.
ABSTRACT
Since the initial landmark study on the chiral induced spin selectivity (CISS) effect in 1999, considerable experimental and theoretical efforts have been made to understand the physical underpinnings and mechanistic features of this interesting phenomenon. As first formulated, the CISS effect refers to the innate ability of chiral materials to act as spin filters for electron transport; however, more recent experiments demonstrate that displacement currents arising from charge polarization of chiral molecules lead to spin polarization without the need for net charge flow. With its identification of a fundamental connection between chiral symmetry and electron spin in molecules and materials, CISS promises profound and ubiquitous implications for existing technologies and new approaches to answering age old questions, such as the homochiral nature of life. This review begins with a discussion of the different methods for measuring CISS and then provides a comprehensive overview of molecules and materials known to exhibit CISS-based phenomena before proceeding to identify structure-property relations and to delineate the leading theoretical models for the CISS effect. Next, it identifies some implications of CISS in physics, chemistry, and biology. The discussion ends with a critical assessment of the CISS field and some comments on its future outlook.
ABSTRACT
High-nickel layered oxides, e.g., LiNi0.8Co0.1Mn0.1O2 (NCM811), are promising candidates for cathode materials in high-energy-density lithium-ion batteries (LIBs). Complementing the notable developments of modification of active materials, this study focused on the polymer binder materials, and a new synthetic route was developed to engineer PVDF binders by covalently grafting copolymers from poly(vinylidene fluoride-co-chlorotrifluoroethylene) (PVDF-CTFE) with multiple functionalities using atom transfer radical polymerization (ATRP). The grafted random copolymer binder provided excellent flexibility (319% elongation), adhesion strength (50 times higher than PVDF), transition metal chelation capability, and efficient ionic conductivity pathways. The NCM811 half-cells using the designed binders exhibited a remarkable rate capability of 143.4 mA h g-1 at 4C and cycling stability with 70.1% capacity retention after 230 cycles at 0.5 C, which is much higher than the 52.3% capacity retention of nonmodified PVDF. The well-retained structure of NCM811 with the designed binder was systematically studied and confirmed by post-mortem analysis.
ABSTRACT
This work uses magneto-electrochemical quartz crystal microbalance methods to study the enantiospecific adsorption of chiral molecules onto a ferromagnetic substrate. The effects of solution conditions, pH, and solvent isotope composition indicate that the kinetics of the enantiomeric adsorption depend strongly on the charge state and geometry of the adsorbate, whereas no thermodynamic contributions to enantiospecificity are found. Density functional theory calculations reveal that an interplay between the adsorbate and solvent molecules is important for defining the observed enantiospecific preference with an applied magnetic field; however, it remains unclear if intermolecular vibrational couplings contribute to the phenomenon.
ABSTRACT
Protein voltammetry studies of cytochrome c, immobilized on chiral tripeptide monolayer films, reveal the importance of the electron spin and the film's homochirality on electron transfer kinetics. Magnetic film electrodes are used to examine how an asymmetry in the standard heterogeneous electron transfer rate constant arises from changes in the electron spin direction and the enantiomer composition of the tripeptide monolayer; rate constant asymmetries as large as 60% are observed. These findings are rationalized in terms of the chiral induced spin selectivity effect and spin-dependent changes in electronic coupling. Lastly, marked differences in the average rate constant are shown between homochiral ensembles, in which the peptide and protein possess the same enantiomeric form, compared to heterochiral ensembles, where the handedness of the peptide layer is opposite to that of the protein or itself comprises heterochiral building blocks. These data demonstrate a compelling rationale for why nature is homochiral; namely, spin alignment in homochiral systems enables more efficient energy transduction.
Subject(s)
Electrons , Peptides , Electron Transport , Peptides/chemistryABSTRACT
This work shows that electron spin polarization and stereoisomeric effects make comparable contributions to the enantioselective binding of amino acids. Magneto-electrochemical quartz crystal microbalance methods are used to study the adsorption of chiral amino acids onto a monolayer film of chiral molecules that are spin polarized by an underlying ferromagnetic substrate. The direction of the electron spin polarization affects both the kinetics and thermodynamics of the enantiospecific adsorption of the amino acids. Comparison of these data with the circular dichroism (CD) spectra of the amino acid adsorbates shows that the CD spectrum of the interacting group provides a good figure-of-merit for predicting the contributions of electron spin to the intermolecular interaction. These findings demonstrate the importance of electron spin in enantioselective intermolecular interactions between chiral amino acids and represent a paradigm shift for how selectivity should be viewed in biorecognition.
ABSTRACT
Continual progress in technologies that rely on water splitting are often hampered by the slow kinetics associated with the oxygen evolution reaction (OER). Here, we show that the efficiency of top-performing catalysts can be improved, beyond typical thermodynamic considerations, through control over reaction intermediate spin alignment during electrolysis. Spin alignment is achieved using the chiral induced spin selectivity (CISS) effect and the improvement in OER manifests as an increase in Faradaic efficiency, decrease in reaction overpotential, and change in the rate determining step for chiral nanocatalysts over compositionally analogous achiral nanocatalysts. These studies illustrate that a defined spatial orientation of the nanocatalysts is not necessary to exhibit spin selectivity and therefore represent a viable platform for employing the transformative role of chirality in other reaction pathways and processes.
Subject(s)
Benchmarking , Electrolysis , Kinetics , Orientation, Spatial , Oxygen , WaterABSTRACT
Controlled reduction of oxygen is important for developing clean energy technologies, such as fuel cells, and is vital to the existence of aerobic organisms. The process starts with oxygen in a triplet ground state and ends with products that are all in singlet states. Hence, spin constraints in the oxygen reduction must be considered. Here, we show that the electron transfer efficiency from chiral electrodes to oxygen (oxygen reduction reaction) is enhanced over that from achiral electrodes. We demonstrate lower overpotentials and higher current densities for chiral catalysts versus achiral ones. This finding holds even for electrodes composed of heavy metals with large spin-orbit coupling. The effect results from the spin selectivity conferred on the electron current by the chiral assemblies, the chiral-induced spin selectivity effect.
Subject(s)
Electrons , Oxygen , Catalysis , Electrodes , Electron Transport , Oxidation-Reduction , Oxygen/chemistryABSTRACT
This study presents a halide exchange mediated cation exchange strategy for a room temperature doping of trivalent lanthanide cations (Ln3+) in cesium lead halide (CsPbX3) nanoparticles (NPs). Post-synthetic addition of LnCl3 [Ln = Nd, Sm, Eu, Tb, Dy, and Yb] to a solution of CsPbBr3 NPs generates the corresponding lanthanide doped NPs which display host sensitized Ln3+ emission. Structural and spectroscopic characterizations indicate a successful halide exchange and substitutional displacement of Pb2+ by Ln3+. The effect of halide identity in controlling the Ln3+ sensitization was also evaluated. A photophysical framework is presented that can be used to predict the Ln3+ sensitization in perovskite NPs semiempirically, thereby removing the constraints of trial and error in designing a perovskite NP-Ln3+ host-guest combination.
ABSTRACT
This study presents a post-synthetic ligand modification strategy for the generation of chiroptically active, blue emitting CsPbBr3 nanoparticles (NPs) - an expansion to the library of 3D chiral perovskite nanomaterials. Addition of [R- and S-] 1-phenylethylamine, 1-(1-naphthyl)ethylamine, or 2-aminooctane to the synthesized CsPbBr3 NPs is shown to induce Cotton effects in the NP first exciton transition, suggestive of a successful electronic coupling between the chiral ligands and the NPs. The availability of these chiral CsPbBr3 NPs thrusts them into the forefront of perovskite nanomaterials for examining the implications of the chiral induced spin selectivity (CISS) effect and other applications in spintronics.
ABSTRACT
The detection of enantiopurity for small sample quantities is crucial, particularly in the pharmaceutical industry; however, existing methodologies rely on specific chiral recognition elements, or complex optical systems, limiting its utility. A nanoscale chirality sensor, for continuously monitoring molecular chirality using an electric circuit readout, is presented. This device design represents an alternative real-time scalable approach for chiral recognition of small quantity samples (less than 103 adsorbed molecules). The active device component relies on a gold nanofloret hybrid structure, i.e., a high aspect ratio semiconductor-metal hybrid nanosystem in which a SiGe nanowire tip is selectively decorated with a gold metallic cap. The tip mechanically touches a counter electrode to generate a nanojunction, and upon exposure to molecules, a metal-molecule-metal junction is formed. Adsorption of chiral molecules at the gold tip induces chirality in the localized plasmonic resonance at the electrode-tip junction and manifests in an enantiospecific current response.
Subject(s)
Nanowires , Surface Plasmon Resonance , Electronics , Gold , StereoisomerismABSTRACT
High entropy alloy nanoparticles (HEA-NPs) are expanding their influence in many fields. To explore the electronic structures in such multielemental systems, HEA-NPs were synthesized on two different carbon substrates through carbothermal shock and in situ reduction methods. The relationship between the apparent core level energy shifts (negative or positive) and the electron density changes among the components of quinary-metal HEA-NPs was investigated by X-ray photoelectron spectroscopy (XPS) analysis and first-principles electronic structure calculations. It was found that Cu displays a negative core level shift while Fe, Co, Mg, Cr, and Mn display a positive core level shift. While experiments show an apparent positive core level shift for Ni, electronic structure calculations reveal that this arises from shifts in the Fermi level and that the electron density redistribution in Ni behaves more like Cu than the other elements. The findings show that the electron density redistribution in the NPs occurs from less electronegative elements to more electronegative ones. This work should guide the design of HEA-NPs to expand their potential applications in mechanical structures, medicine, catalysis, and energy storage/conversion.
ABSTRACT
The recent convergence of chiral molecules with metal halide perovskite frameworks gives rise to an interesting family of chiral systems: two-dimensional, chiral hybrid organic-inorganic perovskites (chiral-HOIPs). While possessing photovoltaic properties of traditional HOIPs, this class of materials is endowed with chirality through its organic ligands in which the degeneracy of the electron spin in charge transport is broken. That is, the chirality-induced spin selectivity (CISS) effect manifests, making it a promising platform to bridge opto-spintronic studies and the CISS effect. In this work, chiral-HOIP/NiFe heterostructures are studied by means of the magneto-optical Kerr effect using a Sagnac interferometer. Upon illumination of the chiral-HOIPs, the Kerr signal at the chiral-HOIP/NiFe interface changes, and a linear dependence of the response on the magnetic field is observed. The sign of the slope was found to depend on the chirality of the HOIPs. The results demonstrate the utility of chiral-HOIP materials for chiral opto-spintronic applications.
ABSTRACT
Kelvin-probe measurements on ferromagnetic thin film electrodes coated with self-assembled monolayers of chiral molecules reveal that the electron penetration from the metal electrode into the chiral molecules depends on the ferromagnet's magnetization direction and the molecules' chirality. Electrostatic potential differences as large as 100 mV are observed. These changes arise from the applied oscillating electric field, which drives spin-dependent charge penetration from the ferromagnetic substrate to the chiral molecules. The enantiospecificity of the response is studied as a function of the magnetization strength, the magnetization direction, and the handedness and length of the chiral molecules. These new phenomena are rationalized in terms of the chiral-induced spin selectivity (CISS) effect, in which one spin orientation of electrons from the ferromagnet penetrates more easily into a chiral molecule than does the other orientation. The large potential changes (>kT at room temperature) manifested here imply that this phenomenon is important for spin transport in chiral spintronic devices and for magneto-electrochemistry of chiral molecules.
ABSTRACT
We show that enantioselective reactions can be induced by the electron spin itself and that it is possible to replace a conventional enantiopure chemical reagent by spin-polarized electrons that provide the chiral bias for enantioselective reactions. Three examples of enantioselective chemistry resulting from electron-spin polarization are presented. One demonstrates the enantioselective association of a chiral molecule with an achiral self-assembled monolayer film that is spin-polarized, while the other two show that the chiral bias provided by the electron helicity can drive both reduction and oxidation in enantiospecific electrochemical reactions. In each case, the enantioselectivity does not result from enantiospecific interactions of the molecule with the ferromagnetic electrode but from the polarized spin that crosses the interface between the substrate and the molecule. Furthermore, the direction of the electron-spin polarization defines the handedness of the enantioselectivity. This work demonstrates a new mechanism for realizing enantioselective chemistry.
ABSTRACT
Optical control and readout of electron spin and spin currents in thin films and nanostructures have remained attractive yet challenging goals for emerging technologies designed for applications in information processing and storage. Recent advances in room-temperature spin polarization using nanometric chiral molecular assemblies suggest that chemically modified surfaces or interfaces can be used for optical spin conversion by exploiting photoinduced charge separation and injection from well-coupled organic chromophores or quantum dots. Using light to drive photoexcited charge-transfer processes mediated by molecules with central or helical chirality enables indirect measurements of spin polarization attributed to the chiral-induced spin selectivity effect and of the efficiency of spin-dependent electron transfer relative to competitive relaxation pathways. Herein, we highlight recent approaches used to detect and to analyze spin selectivity in photoinduced charge transfer including spin-transfer torque for local magnetization, nanoscale charge separation and polarization, and soft ferromagnetic substrate magnetization- and chirality-dependent photoluminescence. Building on these methods through systematic investigation of molecular and environmental parameters that influence spin filtering should elucidate means to manipulate electron spins and photoexcited states for room-temperature optoelectronic and photospintronic applications.
ABSTRACT
The rapid growth in demand for data and the emerging applications of Big Data require the increase of memory capacity. Magnetic memory devices are among the leading technologies for meeting this demand; however, they rely on the use of ferromagnets that creates size reduction limitations and poses complex materials requirements. Usually magnetic memory sizes are limited to 30-50 nm. Reducing the size even further, to the ≈10-20 nm scale, destabilizes the magnetization and its magnetic orientation becomes susceptible to thermal fluctuations and stray magnetic fields. In the present work, it is shown that 10 nm single domain ferromagnetism can be achieved. Using asymmetric adsorption of chiral molecules, superparamagnetic iron oxide nanoparticles become ferromagnetic with an average coercive field of ≈80 Oe. The asymmetric adsorption of molecules stabilizes the magnetization direction at room temperature and the orientation is found to depend on the handedness of the chiral molecules. These studies point to a novel method for the miniaturization of ferromagnets (down to ≈10 nm) using established synthetic protocols.