Flipping Water Orientation at the Surface of Water-in-Salt and Salt-in-Water Solutions.

Salt-in-water and water-in-salt mixtures are promising for battery applications and fine-tuning of room-temperature ionic liquid (RTIL) properties. Although critical processes take place at interfaces of these systems, including charge transfer and heterogeneous catalytic reactions, the microscopic interfacial structures remain unclear. Here, we apply heterodyne-detected sum-frequency generation spectroscopy to aqueous solutions of imidazolium-based RTILs to unveil the microscopic structure of the interfaces of these solutions with air. Our results show that, under salt-in-water conditions, the orientation of the OH group hydrogen-bonded to the other water molecules flips from the OH group pointing down into the liquid for pure water to up due to the accumulation of anions in the cation-rich interfacial region. However, under the water-in-salt condition, the interfacial water molecules are confined by RTIL, and their orientation is down. Details of the water organization depend critically on the alkyl chain length of the imidazolium cation. Our results demonstrate that the surface structure can be tuned by altering the molecular structure and concentration of the RTIL.

Tailoring Polaron Dimensions in Lead-Tin Hybrid Perovskites.

Charge carriers in the soft and polar perovskite lattice form so-called polaron quasiparticles, charge carriers dressed with a lattice deformation. The spatial extent of a polaron is governed by the material's electron-phonon interaction strength, which determines charge carrier effective mass, mobility, and the so-called Mott polaron density, that is, the maximum stable density of charge carriers that a perovskite can support. Despite its significance, controlling polaron dimensions has been challenging. Here, experimental substantial tuning of polaron dimensions is reported by lattice engineering, through Pb/Sn substitution in CH3NH3SnxPb1-xI3. The polaron dimension is deduced from the Mott polaron density, which can be composition-tuned over an order of magnitude, while charge carrier mobility occurs through band transport, and remains substantial across all compositions, ranging from 10 s to 100 s cm2 V s-1 at room temperature. The effective modulation of polaron size can be understood by considering the bond asymmetry after carrier injection as well as the random spatial distribution of Pb/Sn ions. This study underscores the potential for tailoring polaron dimensions, which is crucial for optimizing applications prioritizing either high charge carrier density or high mobility.

Structural adaptability and surface activity of peptides derived from tardigrade proteins.

Tardigrades are unique micro-organisms with a high tolerance to desiccation. The protection of their cells against desiccation involves tardigrade-specific proteins, which include the so-called cytoplasmic abundant heat soluble (CAHS) proteins. As a first step towards the design of peptides capable of mimicking the cytoprotective properties of CAHS proteins, we have synthesized several model peptides with sequences selected from conserved CAHS motifs and investigated to what extent they exhibit the desiccation-induced structural changes of the full-length proteins. Using circular dichroism spectroscopy, two-dimensional infrared spectroscopy, and molecular dynamics simulations, we have found that the CAHS model peptides are mostly disordered, but adopt a more α $$ \alpha $$ -helical structure upon addition of 2,2,2-trifluoroethanol, which mimics desiccation. This structural behavior is similar to that of full-length CAHS proteins, which also adopt more ordered conformations upon desiccation. We also have investigated the surface activity of the peptides at the air/water interface, which also mimics partial desiccation. Interestingly, sum-frequency generation spectroscopy shows that all model peptides are surface active and adopt a helical structure at the air/water interface. Our results suggest that amino acids with high helix-forming propensities might contribute to the propensity of these peptides to adopt a helical structure when fully or partially dehydrated. Thus, the selected sequences retain part of the CAHS structural behavior upon desiccation, and might be used as a basis for the design of new synthetic peptide-based cryoprotective materials.

Compositional engineering of interfacial charge transfer in van der Waals heterostructures of graphene and transition metal dichalcogenides.

Owing to their unique optical and electronic properties, vertical van der Waals heterostructures (vdWHs) have attracted considerable attention in optoelectronic applications, such as photodetection, light harvesting, and light-emitting diodes. To fully harness these properties, it is crucial to understand the interfacial charge transfer (CT) and recombination dynamics across vdWHs. However, the effects of interfacial energetics and defect states on interfacial CT and recombination processes in graphene-transition metal dichalcogenide (Gr-TMD) vdWHs remain debated. Here, we investigate the interfacial CT dynamics in Gr-TMD vdWHs with different chemical compositions (W, Mo, S, and Se) and tunable interfacial energetics. We demonstrate, using ultrafast terahertz spectroscopy, that while the photo-induced electron transfer direction is universal with graphene donating electrons to TMDs, its efficiency is chalcogen-dependent: the CT efficiency of S atom-based vdWHs is 3-5 times higher than that of Se-based vdWHs thanks to the lower Schottky barrier present in S-based vdWHs. In contrast, the electron back transfer process from TMD to Gr, which defines the charge separation time, is transition metal-dependent and dominated by the mid-gap defect level of TMDs: W transition metal-based vdWHs possess extremely long charge separation, well beyond 1 ns, which is significantly longer than Mo-based vdWHs with only 10 s of ps charge separation. This difference can be traced to the much deeper mid-gap defect reported in W-based TMDs compared to Mo-based ones, resulting in modified energetics for the back electron transfer from the trapped states to graphene. Our results shed light on the role of interfacial energetics and defects by tailoring chemical compositions of TMDs on the interfacial CT and recombination dynamics in Gr-TMD vdWHs, which is pivotal for optimizing optoelectronic devices, particularly in the field of photodetection.

Single-Atom Catalysts through Pressure-Controlled Metal Diffusion.

Single-atom catalysts (SACs) open up new possibilities for advanced technologies. However, a major complication in preparing high-density single-atom sites is the aggregation of single atoms into clusters. This complication stems from the delicate balance between the diffusion and stabilization of metal atoms during pyrolysis. Here, we present pressure-controlled metal diffusion as a new concept for fabricating ultra-high-density SACs. Reducing the pressure inhibits aggregation substantially, resulting in almost three times higher single-atom loadings than those obtained at ambient pressure. Molecular dynamics and computational fluid dynamics simulations reveal the role of a metal hopping mechanism, maximizing the metal atom distribution through an increased probability of metal-ligand binding. The investigation of the active site density by electrocatalytic oxygen reduction validates the robustness of our approach. The first realization of Ullmann-type carbon-oxygen couplings catalyzed on single Cu sites demonstrates further options for efficient heterogeneous catalysis.

Anisotropic Electron-Phonon Interactions in 2D Lead-Halide Perovskites.

Two-dimensional (2D) hybrid organic-inorganic metal halide perovskites offer enhanced stability for perovskite-based applications. Their crystal structure's soft and ionic nature gives rise to strong interaction between charge carriers and ionic rearrangements. Here, we investigate the interaction of photogenerated electrons and ionic polarizations in single-crystal 2D perovskite butylammonium lead iodide (BAPI), varying the inorganic lamellae thickness in the 2D single crystals. We determine the directionality of the transition dipole moments (TDMs) of the relevant phonon modes (in the 0.3-3 THz range) by the angle- and polarization-dependent THz transmission measurements. We find a clear anisotropy of the in-plane photoconductivity, with a ∼10% reduction along the axis parallel with the transition dipole moment of the most strongly coupled phonon. Detailed calculations, based on Feynman polaron theory, indicate that the anisotropy originates from directional electron-phonon interactions.

Self-Blinking Thioflavin T for Super-resolution Imaging.

Thioflavin T (ThT) is a typical dye used to visualize the aggregation and formation of fibrillar structures, e.g., amyloid fibrils and peptide nanofibrils. ThT has been considered to produce stable fluorescence when interacting with aggregated proteins. For single-molecule localization microscopy (SMLM)-based optical super-resolution imaging, a photoswitching/blinking fluorescence property is required. Here we demonstrate that, in contrast to previous reports, ThT exhibits intrinsic stochastic blinking properties, without the need for blinking imaging buffer, in stable binding conditions. The blinking properties (photon number, blinking time, and on-off duty cycle) of ThT at the single-molecule level (for ultralow concentrations) were investigated under different conditions. As a proof of concept, we performed SMLM imaging of ThT-labeled α-synuclein fibrils measured in air and PBS buffer.

Odd-Even Alkyl Chain Effects on the Structure and Charge Carrier Transport of Two-Dimensional Sn-Based Perovskite Semiconductors.

Oscillations in the chemical or physical properties of materials, composed of an odd or even number of connected repeating methylene units, are a well-known phenomenon in organic chemistry and materials science. So far, such behavior has not been reported for the important class of materials, perovskite semiconductors. This work reports a distinct odd-even oscillation of the molecular structure and charge carrier transport properties of phenylalkylammonium two-dimensional (2D) Sn-based perovskites in which the alkyl chains in the phenylalkylammonium cations contain varying odd and even carbon numbers. Density functional theory calculations and grazing-incidence wide-angle X-ray scattering characterization reveal that perovskites with organic ligands containing an alkyl chain with an odd number of carbon atoms display a disordered crystal lattice and tilted inorganic octahedra accompanied by reduced mobilities. In contrast, perovskites with cations of an even number of carbon atoms in the alkyl chain form more ordered crystal structures, resulting in improved charge carrier mobilities. Our findings disclose the importance of minor changes in the molecular conformation of organic cations have an effect on morphology, photophysical properties, and charge carrier transport of 2D layered perovskites, showcasing alkyl chain engineering of organic cations to control key properties, of layered perovskite semiconductors.

MXenes with ordered triatomic-layer borate polyanion terminations.

Surface terminations profoundly influence the intrinsic properties of MXenes, but existing terminations are limited to monoatomic layers or simple groups, showing disordered arrangements and inferior stability. Here we present the synthesis of MXenes with triatomic-layer borate polyanion terminations (OBO terminations) through a flux-assisted eutectic molten etching approach. During the synthesis, Lewis acidic salts act as the etching agent to obtain the MXene backbone, while borax generates BO2- species, which cap the MXene surface with an O-B-O configuration. In contrast to conventional chlorine/oxygen-terminated Nb2C with localized charge transport, OBO-terminated Nb2C features band transport described by the Drude model, exhibiting a 15-fold increase in electrical conductivity and a 10-fold improvement in charge mobility at the d.c. limit. This transition is attributed to surface ordering that effectively mitigates charge carrier backscattering and trapping. Additionally, OBO terminations provide Ti3C2 MXene with substantially enriched Li+-hosting sites and thereby a large charge-storage capacity of 420 mAh g-1. Our findings illustrate the potential of intricate termination configurations in MXenes and their applications for (opto)electronics and energy storage.

Water Solvent Reorganization upon Ultrafast Resonant Stimulated X-ray Raman Excitation of a Metalloporphyrin Dimer.

We propose an X-ray Raman pump-X-ray diffraction probe scheme to follow solvation dynamics upon charge migration in a solute molecule. The X-ray Raman pump selectively prepares a valence electronic wavepacket in the solute, while the probe provides information about the entire molecular ensemble. A combination of molecular dynamics and ab initio quantum chemistry simulations is applied to a Zn-Ni porphyrin dimer in water. Using time-resolved X-ray diffraction and pair distribution functions, we extracted solvation shell dynamics.

Quasi-Homogeneous Photocatalysis in Ultrastiff Microporous Polymer Aerogels.

The development of efficient and low-cost catalysts is essential for photocatalysis; however, the intrinsically low photocatalytic efficiency as well as the difficulty in using and recycling photocatalysts in powder morphology greatly limit their practical performance. Herein, we describe quasi-homogeneous photocatalysis to overcome these two limitations by constructing ultrastiff, hierarchically porous, and photoactive aerogels of conjugated microporous polymers (CMPs). The CMP aerogels exhibit low density but high stiffness beyond 105 m2 s-2, outperforming most low-density materials. Extraordinary stiffness ensures their use as robust scaffolds for scaled photocatalysis and recycling without damage at the macroscopic level. A challenging but desirable reaction for direct deaminative borylation is demonstrated using CMP aerogel-based quasi-homogeneous photocatalysis with gram-scale productivity and record-high efficiency under ambient conditions. Combined terahertz and transient absorption spectroscopic studies unveil the generation of high-mobility free carriers and long-lived excitonic species in the CMP aerogels, underlying the observed superior catalytic performance.

Heterodyne-Detected Sum-Frequency Generation Vibrational Spectroscopy Reveals Aqueous Molecular Structure at the Suspended Graphene/Water Interface.

Graphene, a transparent two-dimensional conductive material, has brought extensive new perspectives and prospects to various aqueous technological systems, such as desalination membranes, chemical sensors, energy storage, and energy conversion devices. Yet, the molecular-level details of graphene in contact with aqueous electrolytes, such as water orientation and hydrogen bond structure, remain elusive or controversial. Here, we employ surface-specific heterodyne-detected sum-frequency generation (HD-SFG) vibrational spectroscopy to re-examine the water molecular structure at a freely suspended graphene/water interface. We compare the response from the air/graphene/water system to that from the air/water interface. Our results indicate that the χ y y z 2 ${{\chi }_{yyz}^{\left(2\right)}}$ spectrum recorded from the air/graphene/water system arises from the topmost 1-2 water layers in contact with the graphene, with the graphene itself not generating a significant SFG response. Compared to the air/water interface response, the presence of monolayer graphene weakly affects the interfacial water. Graphene weakly affects the dangling O-H group, lowering its frequency through its interaction with the graphene sheet, and has a very small effect on the hydrogen-bonded O-H group. Molecular dynamics simulations confirm our experimental observation. Our work provides molecular insight into the interfacial structure at a suspended graphene/water interface, relevant to various technological applications of graphene.

Control of the Hydroquinone/Benzoquinone Redox State in High-Mobility Semiconducting Conjugated Coordination Polymers.

Conjugated coordination polymers (c-CPs) are unique organic-inorganic hybrid semiconductors with intrinsically high electrical conductivity and excellent charge carrier mobility. However, it remains a challenge in tailoring electronic structures, due to the lack of clear guidelines. Here, we develop a strategy wherein controlling the redox state of hydroquinone/benzoquinone (HQ/BQ) ligands allows for the modulation of the electronic structure of c-CPs while maintaining the structural topology. The redox-state control is achieved by reacting the ligand TTHQ (TTHQ=1,2,4,5-tetrathiolhydroquinone) with silver acetate and silver nitrate, yielding Ag4TTHQ and Ag4TTBQ (TTBQ=1,2,4,5-tetrathiolbenzoquinone), respectively. In spite of sharing the same topology consisting of a two-dimensional Ag-S network and HQ/BQ layer, they exhibit different band gaps (1.5 eV for Ag4TTHQ and 0.5 eV for Ag4TTBQ) and conductivities (0.4 S/cm for Ag4TTHQ and 10 S/cm for Ag4TTBQ). DFT calculations reveal that these differences arise from the ligand oxidation state inhibiting energy band formation near the Fermi level in Ag4TTHQ. Consequently, Ag4TTHQ displays a high Seebeck coefficient of 330 µV/K and a power factor of 10 µW/m ⋅ K2, surpassing Ag4TTBQ and the other reported silver-based c-CPs. Furthermore, terahertz spectroscopy demonstrates high charge mobilities exceeding 130 cm2/V ⋅ s in both Ag4TTHQ and Ag4TTBQ.

Porphyrin-fused graphene nanoribbons.

Graphene nanoribbons (GNRs), nanometre-wide strips of graphene, are promising materials for fabricating electronic devices. Many GNRs have been reported, yet no scalable strategies are known for synthesizing GNRs with metal atoms and heteroaromatic units at precisely defined positions in the conjugated backbone, which would be valuable for tuning their optical, electronic and magnetic properties. Here we report the solution-phase synthesis of a porphyrin-fused graphene nanoribbon (PGNR). This PGNR has metalloporphyrins fused into a twisted fjord-edged GNR backbone; it consists of long chains (>100 nm), with a narrow optical bandgap (~1.0 eV) and high local charge mobility (>400 cm2 V-1 s-1 by terahertz spectroscopy). We use this PGNR to fabricate ambipolar field-effect transistors with appealing switching behaviour, and single-electron transistors displaying multiple Coulomb diamonds. These results open an avenue to π-extended nanostructures with engineerable electrical and magnetic properties by transposing the coordination chemistry of porphyrins into graphene nanoribbons.

Near-Infrared Perylenecarboximide Fluorophores for Live-Cell Super-Resolution Imaging.

Organic near-infrared (NIR) photoblinking fluorophores are highly desirable for live-cell super-resolution imaging based on single-molecule localization microscopy (SMLM). Herein we introduce a novel small chromophore, PMIP, through the fusion of perylenecarboximide with 2,2-dimetheylpyrimidine. PMIP exhibits an emission maximum at 732 nm with a high fluorescence quantum yield of 60% in the wavelength range of 700-1000 nm and excellent photoblinking without any additives. With resorcinol-functionalized PMIP (PMIP-OH), NIR SMLM imaging of lysosomes is demonstrated for the first time in living mammalian cells under physiological conditions. Moreover, metabolically labeled nascent DNA is site-specifically detected using azido-functionalized PMIP (PMIP-N3) via click chemistry, thereby enabling the super-resolution imaging of nascent DNA in phosphate-buffered saline with a 9-fold improvement in spatial resolution. These results indicate the potential of PMIP-based NIR blinking fluorophores for biological applications of SMLM.

A solid beta-sheet structure is formed at the surface of FUS droplets during aging.

Phase transitions are important to understand cell dynamics, and the maturation of liquid droplets is relevant to neurodegenerative disorders. We combined NMR and Raman spectroscopies with microscopy to follow, over a period of days to months, droplet maturation of the protein fused in sarcoma (FUS). Our study reveals that the surface of the droplets plays a critical role in this process, while RNA binding prevents it. The maturation kinetics are faster in an agarose-stabilized biphasic sample compared with a monophasic condensed sample, owing to the larger surface-to-volume ratio. In addition, Raman spectroscopy reports structural differences upon maturation between the inside and the surface of droplets, which is comprised of ß-sheet content, as revealed by solid-state NMR. In agreement with these observations, a solid crust-like shell is observed at the surface using microaspiration. Ultimately, matured droplets were converted into fibrils involving the prion-like domain as well as the first RGG motif.

Depth-profiling alkyl chain order in unsaturated lipid monolayers on water.

Unsaturated lipids with C=C groups in their alkyl chains are widely present in the cell membrane and food. The C=C groups alter the lipid packing density, membrane stability, and persistence against lipid oxidation. Yet, molecular-level insights into the structure of the unsaturated lipids remain scarce. Here, we probe the molecular structure and organization of monolayers of unsaturated lipids on the water surface using heterodyne-detected sum-frequency generation (HD-SFG) spectroscopy. We vary the location of the C=C in the alkyl chain and find that at high lipid density, the location of the C=C group affects neither the interfacial water organization nor the tail of the alkyl chain. Based on this observation, we use the C=C stretch HD-SFG response to depth-profile the alkyl chain conformation of the unsaturated lipid. We find that the first 1/3 of carbon atoms from the headgroup are relatively rigid, oriented perpendicular to the surface. In contrast, the remaining carbon atoms can be approximated as free rotators, introducing the disordering of the alkyl chains.

A Cu3BHT-Graphene van der Waals Heterostructure with Strong Interlayer Coupling for Highly Efficient Photoinduced Charge Separation.

Two-dimensional van der Waals heterostructures (2D vdWhs) are of significant interest due to their intriguing physical properties critically defined by the constituent monolayers and their interlayer coupling. Synthetic access to 2D vdWhs based on chemically tunable monolayer organic 2D materials remains challenging. Herein, the fabrication of a novel organic-inorganic bilayer vdWh by combining π-conjugated 2D coordination polymer (2DCP, i.e., Cu3BHT, BHT = benzenehexathiol) with graphene is reported. Monolayer Cu3BHT with detectable µm2-scale uniformity and atomic flatness is synthesized using on-water surface chemistry. A combination of diffraction and imaging techniques enables the determination of the crystal structure of monolayer Cu3BHT with atomic precision. Leveraging the strong interlayer coupling, Cu3BHT-graphene vdWh exhibits highly efficient photoinduced interlayer charge separation with a net electron transfer efficiency of up to 34% from Cu3BHT to graphene, superior to those of reported bilayer 2D vdWhs and molecular-graphene vdWhs. This study unveils the potential for developing novel 2DCP-based vdWhs with intriguing physical properties.

Spontaneous Appearance of Triiodide Covering the Topmost Layer of the Iodide Solution Interface Without Photo-Oxidation.

Ions containing iodine atoms at the vapor-aqueous solution interfaces critically affect aerosol growth and atmospheric chemistry due to their complex chemical nature and multivalency. While the surface propensity of iodide ions has been intensely discussed in the context of the Hofmeister series, the stability of various ions containing iodine atoms at the vapor-water interface has been debated. Here, we combine surface-specific sum-frequency generation (SFG) vibrational spectroscopy with ab initio molecular dynamics simulations to examine the extent to which iodide ions cover the aqueous surface. The SFG probe of the free O-D stretch mode of heavy water indicates that the free O-D group density decreases drastically at the interface when the bulk NaI concentration exceeds ∼2 M. The decrease in the free O-D group density is attributed to the spontaneous appearance of triiodide that covers the topmost interface rather than to the surface adsorption of iodide. This finding demonstrates that iodide is not surface-active, yet the highly surface-active triiodide is generated spontaneously at the water-air interface, even under dark and oxygen-free conditions. Our study provides an important first step toward clarifying iodine chemistry and pathways for aerosol formation.

Unveiling the role of linear alkyl organic cations in 2D layered tin halide perovskite field-effect transistors.

Two-dimensional (2D) tin halide perovskites are promising semiconductors for field-effect transistors (FETs) owing to their fascinating electronic properties. However, the correlation between the chemical nature of organic cations and charge carrier transport is still far from understanding. In this study, the influence of chain length of linear alkyl ammonium cations on film morphology, crystallinity, and charge transport in 2D tin halide perovskites is investigated. The carbon chain lengths of the organic spacers vary from propylammonium to heptanammonium. The increase of alkyl chain length leads to enhanced local charge carrier transport in the perovskite film with mobilities of up to 8 cm2 V-1 s-1, as confirmed by optical-pump terahertz spectroscopy. A similar improved macroscopic charge transport is also observed in FETs, only to the chain length of HA, due to the synergistic enhancement of film morphology and molecular organization. While the mobility increases with the temperature rise from 100 K to 200 K due to the thermally activated transport mechanism, the device performance decreases in the temperature range of 200 K to 295 K because of ion migration. These results provide guidelines on rational design principles of organic spacer cations for 2D tin halide perovskites and contribute to other optoelectronic applications.