ABSTRACT
Docosahexaenoic acid monoacylglycerol represents a promising lipid constituent in the development of drug nanocarriers owing to its amphiphilicity and the beneficial health effects of this docosahexaenoic acid precursor in various disorders including cancer and inflammatory diseases. Here, we describe the formation and characterization of simple-by-design and stabilizer-free lamellar and non-lamellar crystalline nanoparticles (vesicles and cubosomes, respectively) from binary mixtures of docosahexaenoic acid monoacylglycerol and phosphatidylglycerol, which is a ubiquitous amphiphilic component present in biological systems. At the physiological temperature of 37 °C, these single amphiphilic components tend to exhibit inverse hexagonal and lamellar liquid crystalline phases, respectively, on exposure to excess water. They can also be combined and dispersed in excess water by employing a high-energy emulsification method (by means of ultrasonication) to produce through an electrostatic stabilization mechanism colloidally stable nanodispersions. A colloidal transformation from vesicles to cubosomes was detected with increasing MAG-DHA content. Through use of synchrotron small-angle X-ray scattering, cryo-transmission electron microscopy, and nanoparticle tracking analysis, we report on the structural and morphological features, and size characteristics of these nanodispersions. Depending on the lipid composition, their internal liquid crystalline architectures were spanning from a lamellar (Lα) phase to biphasic features of coexisting inverse bicontinuous (Q2) cubic Pn3m and Im3m phases. Thus, a direct colloidal vesicle-cubosome transformation was detected by augmenting the concentration of docosahexaenoic acid monoacylglycerol. The produced cubosomes were thermally stable within the investigated temperature range of 5-60 °C. Collectively, our findings contribute to understanding of the imperative steps for production of stabilizer-free cubosomes from biocompatible lipids through a simple-by-design approach. We also discuss the potential therapeutic use and future implications for development of next-generation of multifunctional vesicles and cubosomes for co-delivery of docosahexaenoic acid and drugs in treatment of diseases.
ABSTRACT
The transfusion of donor red blood cells (RBCs) is seriously hampered by important drawbacks that include limited availability and portability, the requirement of being stored in refrigerated conditions, a short shelf life or the need for RBC group typing and crossmatching. Thus, hemoglobin (Hb)-based oxygen (O2) carriers (HBOCs) which make use of the main component of RBCs and the responsible protein for O2 transport, hold a lot of promise in modern transfusion and emergency medicine. Despite the great progress achieved, it is still difficult to create HBOCs with a high Hb content to attain the high O2 demands of our body. Herein a metal-phenolic self-assembly approach that can be conducted in water and in one step to prepare nanoparticles (NPs) fully made of Hb (Hb-NPs) is presented. In particular, by combining Hb with polyethylene glycol, tannic acid (TA) and manganese ions, spherical Hb-NPs with a uniform size around 350-525 nm are obtained. The functionality of the Hb-NPs is preserved as shown by their ability to bind and release O2 over multiple rounds. The binding mechanism of TA and Hb is thoroughly investigated by UV-vis absorption and fluorescence spectroscopy. The binding site number, apparent binding constant at two different temperatures and the corresponding thermodynamic parameters are identified. The results demonstrate that the TA-Hb interaction takes place through a static mechanism in a spontaneous process as shown by the decrease in Gibbs free energy. The associated increase in entropy suggests that the TA-Hb binding is dominated by hydrophobic interactions.
Subject(s)
Blood Substitutes , Nanoparticles , Oxygen/chemistry , Oxygen/metabolism , Blood Substitutes/chemistry , Hemoglobins/chemistry , Hemoglobins/metabolism , Nanoparticles/chemistry , MetalsABSTRACT
Considering the broad therapeutic potential of omega-3 polyunsaturated fatty acids such as docosahexaenoic acid (DHA), here we study the effect of PEGylation of DHA-incorporated hexosomes on their physicochemical characteristics and biodistribution following intravenous injection into mice. Hexosomes were formed from phosphatidylglycerol and DHA with a weight ratio of 3:2. PEGylation was achieved through the incorporation of either d-α-tocopheryl succinate poly(ethylene glycol)2000 (TPGS-mPEG2000) or 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-methoxy-poly(ethylene glycol)2000 (DSPE-mPEG2000) at a concentration of 1.5 wt %. Nanoparticle tracking analysis, synchrotron small-angle scattering, and cryo-transmission electron microscopy were employed to characterize the nanodispersions. The results show that PEGylated lipids induce a structural transition from an inverse hexagonal (H2) phase inside the nanoparticles (hexosomes) to a lamellar (Lα) phase (vesicles). We also followed the effect of mouse plasma on the nanodispersion size distribution, number, and morphology because changes brought by plasma constituents could regulate the in vivo performance of intravenously injected nanodispersions. For comparative biodistribution studies, fluorescently labeled nanodispersions of equivalent quantum yields were injected intravenously into healthy mice. TPGS-mPEG2000-induced vesicles were most effective in avoiding hepatosplenic clearance at early time points. In an orthotopic xenograft murine model of glioblastoma, TPGS-mPEG2000-induced vesicles also showed improved localization to the brain compared with native hexosomes. We discuss these observations and their implications for the future design of injectable lyotropic nonlamellar liquid crystalline drug delivery nanosystems for therapeutic interventions of brain and liver diseases.
Subject(s)
Docosahexaenoic Acids , Nanoparticles , Humans , Animals , Mice , Phosphatidylglycerols , Tissue Distribution , Polyethylene Glycols/chemistry , Nanoparticles/chemistry , alpha-Tocopherol , SuccinatesABSTRACT
Lyotropic non-lamellar liquid crystalline (LLC) nanoparticles, with their tunable structural features and capability of loading a wide range of drugs and reporter probes, are emerging as versatile injectable nanopharmaceuticals. Secondary emulsifiers, such as Pluronic block copolymers, are commonly used for colloidal stabilization of LLC nanoparticles, but their inclusion often compromises the biological safety (e.g., poor hemocompatibility and enhanced cytotoxicity) of the formulation. Here, we introduce a library of colloidally stable, structurally tunable, and pH-responsive lamellar and non-lamellar liquid crystalline nanoparticles from binary mixtures of a phospholipid (phosphatidylglycerol) and three types of omega-3 fatty acids (ω-3 PUFAs), prepared in the absence of a secondary emulsifier and organic solvents. We study formulation size distribution, morphological heterogeneity, and the arrangement of their internal self-assembled architectures by nanoparticle tracking analysis, synchrotron small-angle X-ray scattering, and cryo-transmission electron microscopy. The results show the influence of type and concentration of ω-3 PUFAs in nanoparticle structural transitions spanning from a lamellar (Lα) phase to inverse discontinuous (micellar) cubic Fd3m and hexagonal phase (H2) phases, respectively. We further report on cell-culture medium-dependent dynamic fluctuations in nanoparticle size, number and morphology, and simultaneously monitor uptake kinetics in two human cell lines. We discuss the role of these multiparametric biophysical transformations on nanoparticle-cell interaction kinetics and internalization mechanisms. Collectively, our findings contribute to the understanding of fundamental steps that are imperative for improved engineering of LLC nanoparticles with necessary attributes for pharmaceutical development.
Subject(s)
Fatty Acids, Omega-3 , Liquid Crystals , Nanoparticles , Humans , Micelles , PhospholipidsABSTRACT
Microfluidic platforms have become highly attractive tools for synthesis of nanoparticles, including lipid nano-self-assemblies, owing to unique features and at least three important aspects inherent to miniaturized micro-devices. Firstly, the fluids flow under controlled conditions in the microchannels, providing well-defined flow profiles and shorter diffusion lengths that play important roles in enhancing the continuous production of lipid and polymer nanoparticles with relatively narrow size distributions. Secondly, various geometries adapted to microfluidic device designs can be utilized for enhancing the colloidal stability of nanoparticles and improving their drug loading. Thirdly, microfluidic devices are usually compatible with in situ characterization methods for real-time monitoring of processes occurring inside the microchannels. This is unlike conventional nanoparticle synthesis methods, where a final solution or withdrawn aliquots are separately analysed. These features inherent to microfluidic devices provide a tool-set allowing not only precise nanoparticle size control, but also real-time analyses for process optimization. In this review, we focus on recent advances and developments in the use of microfluidic devices for synthesis of lipid nanoparticles. We present different designs based on hydrodynamic flow focusing, droplet-based methods and controlled microvortices, and discuss integration of microfluidic platforms with synchrotron small-angle X ray scattering (SAXS) for in situ structural characterization of lipid nano-self-assemblies under continuous flow conditions, along with major challenges and future directions in this research area.
Subject(s)
Microfluidics , Nanoparticles , Scattering, Small Angle , Synchrotrons , X-Ray DiffractionABSTRACT
Pluronic F127-stabilized non-lamellar liquid crystalline aqueous nanodispersions are promising injectable platforms for drug and contrast agent delivery. These nanodispersions, however, trigger complement activation in the human blood, where the extent of complement activation and opsonization processes may compromise their biological performance and safety. Here, we introduce a broad family of nanodispersions from glycerol monooleate (GMO) and oleic acid (OA) in different weight ratios, and stabilized with a plethora of nonionic methoxypoly(ethylene glycol) (mPEG)-lipids of different PEG chain length and variable lipid moiety (monounsaturated or saturated diglycerides or D-α-tocopheryl succinate). Through an integrated biophysical approach involving dynamic light scattering, synchrotron small-angle scattering, and cryo-transmission electron microscopy, we examine the impact of nonionic mPEG-lipid stabilization on size, internal self-assembled architecture, and gross morphological characteristics of nanodispersions. The results show how the nonionic mPEG-lipid type and concentration, and dependent on GMO/OA weight ratio, can variably modulate the internal architectures of nanoparticles. Assessment of complement profiling from selected nanodispersions with diverse structural heterogeneity further suggests a variable modulatory role for the lipid type of the nonionic mPEG-lipid in the extent of complement activation, which span from no activation to moderate to high levels. We comment on plausible mechanisms driving the observed complement activation variability and discuss the potential utility of these nanodispersions for future development of injectable nanopharmaceuticals.
Subject(s)
Liquid Crystals , Nanoparticles , Pharmaceutical Preparations , Complement Activation , Ethylene Glycol , Glycerides , Humans , Oleic AcidABSTRACT
Krill oil represents an important alternative natural source of omega-3 (ω-3) polyunsaturated fatty acids (PUFAs). Considering the beneficial health effects of these essential fatty acids, particularly in various disorders including cancer, cardiovascular, and inflammation diseases, it is of paramount importance to gain insight into the digestibility of krill oil. In this work, we study the fate of krill oil-in-water emulsion, stabilized by sodium caseinate, during lipolysis by coupling time-resolved synchrotron small-angle X-ray scattering (SAXS) to flow-through lipolysis model. For gaining further insight into the effect of ω-3 PUFA-containing oil type on the dynamic structural features occurring during lipolysis, two additional astaxanthin oil-in-water emulsions, stabilized using either sodium caseinate or citrem, were subjected to lipolysis under identical experimental conditions. In addition to the difference in lipid composition in both oils, ω-3 PUFAs in astaxanthin oil, similar to fish oil, exist in the form of triacylglycerols; whereas most of those in krill oil are bound to phospholipids. SAXS showed the formation of highly ordered nanostructures on exposure of these food emulsions to the lipolysis medium: the detection of a biphasic feature of coexisting inverse hexagonal (H2) and lamellar (Lα) liquid crystalline phases in the digested krill oil droplets' interiors, as compared to a neat Lα phase in the digested astaxanthin oil droplets. We discuss the dynamic phase behavior and describe the suggested important role of these phases in facilitating the delivery of nutrients throughout the body. In addition, the potential implication in the development of food and drug nanocarriers is briefly described.
ABSTRACT
The emergence of nanomedicine as an innovative and promising alternative technology shows many advantages over conventional cancer therapies and provides new opportunities for early detection, improved treatment, and diagnosis of cancer. Despite the cancer nanomedicines' capability of delivering chemotherapeutic agents while providing lower systemic toxicity, it is paramount to consider the cancer complexity and dynamics for bridging the translational bench-to-bedside gap. It is important to conduct appropriate investigations for exploiting the tumor microenvironment, and achieving a more comprehensive understanding of the fundamental biological processes in cancer and their roles in modulating nanoparticle-protein interactions, blood circulation, and tumor penetration. This review provides an overview of the current cancer nanomedicines, the major challenges, and the future opportunities in this research area.
Subject(s)
Antineoplastic Agents/therapeutic use , Nanomedicine , Neoplasms/drug therapy , Antineoplastic Agents/chemistry , Drug Carriers/chemistry , Drug Carriers/metabolism , Government Regulation , Half-Life , Humans , Nanoparticles/chemistry , Nanoparticles/metabolism , Neoplasms/diagnosis , Neoplasms/pathology , Tumor MicroenvironmentABSTRACT
The attractiveness of new omega-3 (ω-3) polyunsaturated fatty acid (PUFA) monoglycerides (MAGs) lies in the amphiphilic nature and the beneficial health effects as PUFA precursors in various disorders including cancer, pulmonary hypertension, and inflammatory diseases. For exploring the potential therapeutic applications of these new amphiphilic lipids, particularly as main lipid constituents in the development of nanocarriers for delivery of drugs and PUFAs, it is of paramount importance to gain insight into their self-assembly behavior on exposure to excess water. This work describes the structural characteristics of self-assemblies based on two newly synthesized MAGs, namely docosahexaenoic acid (MAG-DHA) and docosapentaenoic acid (MAG-DPA) monoglycerides, on exposure to excess water. We found that both lipids tend to form a dominant inverse hexagonal (H2) phase in excess water at 25 °C and a temperature-triggered structural transition to an inverse micellar solution (L2 phase) is detected similar to that recently reported (A. Yaghmur et al., Langmuir, 2017, 33, 14045-14057) for eicosapentaenoic acid monoglyceride (MAG-EPA). An experimental SAXS structural evaluation study on the temperature-dependent behavior of these new monoglycerides is provided, and the effects of unsaturation degree and fatty acyl chain length on the self-assembled structural features in excess water and on the H2-L2 phase transition temperature are discussed. In addition, hexosomes stabilized by using the triblock copolymer F127 and the food-grade emulsifier citrem were investigated to gain insights into the effects of stabilizer and temperature on the internal nanostructure. These nanoparticles are attractive for use in the development of nanocarriers for delivering drugs and/or nutritional compounds as the beneficial health effects of ω-3 PUFA monoglycerides can be combined with those of loaded therapeutic agents or nutraceuticals.
Subject(s)
Docosahexaenoic Acids/chemistry , Fatty Acids, Omega-3/chemistry , Fatty Acids, Unsaturated/chemistry , Monoglycerides/chemistry , Molecular StructureABSTRACT
Recently, development of fluorescent nanoparticle-based probes for various bioimaging applications has attracted great attention. This work aims to develop a new type fluorescent nanoparticle conjugate and evaluate its cytotoxic effects on A549 and BEAS 2B cell lines. Throughout the study, ionically crosslinked chitosan nanoparticles (CNs) were conjugated with carboxylated 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY-COOH). The results of conjugates (BODIPY-CNs) were investigated with regard to their physic-chemical, optical, cytotoxic properties and cellular internalization. The morphology of BODIPY-CNs was found to be spherical in shape and quite uniform having average diameter of 70.25 ± 11.99 nm. Cytotoxicty studies indicated that although BODIPY-COOH itself was quite toxic on both A549- and BEAS 2B-treated cells, CNs increased the cell viability of both cell lines via conjugation to BODIPY-COOH fluorescent molecule up to 67% for A549 and 74% for BEAS 2B cells. These results may suggest a possible utilization of the new fluorescent nanoparticle-based probe for bioimaging in biology and medicine.
Subject(s)
Bronchi/metabolism , Chitosan/metabolism , Fluorescent Dyes/metabolism , Nanoparticles/metabolism , Porphobilinogen/analogs & derivatives , Respiratory Mucosa/metabolism , Absorption, Physiological , Bronchi/cytology , Bronchi/drug effects , Cell Line , Cell Line, Tumor , Cell Survival/drug effects , Chitosan/adverse effects , Chitosan/chemistry , Diagnostic Imaging/adverse effects , Dynamic Light Scattering , Fluorescent Dyes/adverse effects , Fluorescent Dyes/chemistry , Humans , Microscopy, Atomic Force , Microscopy, Confocal , Microscopy, Electron, Scanning , Nanoparticles/adverse effects , Nanoparticles/chemistry , Nanoparticles/ultrastructure , Particle Size , Porphobilinogen/adverse effects , Porphobilinogen/chemistry , Porphobilinogen/metabolism , Respiratory Mucosa/cytology , Respiratory Mucosa/drug effects , Spectroscopy, Fourier Transform InfraredABSTRACT
Although chitosan nanoparticles (CNs) became a promising tool for several biological and medical applications owing to their inherent biocompatibility and biodegradability features, studies regarding their effects on cytotoxic and cytostatic properties still remain insufficient. Therefore, in the present study, we decided to perform comprehensive analysis of the interactions between CNs-pKindling-Red-Mito (pDNA) and different cell line models derived from blood system and human solid tissues cancers. The resulting CNs-pDNA was investigated in terms of their cellular uptake, transfection efficiency, and physico-chemical, cytotoxic and cytostatic properties. The nanoparticles showed high encapsulation efficiency and physical stability for various formulations even after two days time period. Moreover, high gene expression levels were observed after 96h of transfection. CNs-pDNA treatment, despite the absence of oxidative stress induction, caused cell cycle arrest in G0/G1 phase and as a consequence led to premature senescence which turned out to be both p21-dependent and p21-independent. Also, observed DNMT2 upregulation may suggest the activation of different pathways protecting from the results of CNs-mediated stress. In conclusion, treatment of different cell lines with CNs-pDNA showed that their biocompatibility was limited and the effects were cell type-dependent.